Rent movies says unknown error
When I try to rent a movie on my iPad, it won't let me and says "unknown error".
I also have this problem. I am thinking i am going to call customer support about this tomorrow. If i get it fixed i will post on here.
Similar Messages
-
how do i fix my iphone 5 stuck in recovery mode and wont let me restore it just says unknown error 1603 has occured
http://support.apple.com/kb/TS3694#error1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
http://support.apple.com/kb/TS3694#error1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection. -
"Error compiling movie. Unknown error" while rendering a .PSD or .PNG
Hi,
I have this problem: When I try to make a "Render Selection" or export my video, everything is ok until I reach a .PSD file I've placed almost in the end of the clip.
The same is for .PNG file, a dialog appears saying "Error compiling movie. Unknown error".
I've tried to delete the effects, but it's the same. To be more specific, I've applied a simple "Cross Dissolve": Until the transition is working, and the picture is not entirely visible, the rendering works. When the picture is "complete", the render stops and the error appears.
When I tried to delete the transitions, the error appeared in the beginning of the .PSD picture.
Any help?
ThanksAre you stills in RGB format? what pixel size are they?
-
Error compiling movie. Unknown error - When exporting
Hi everyone.
Exporting movies in Premiere PRO won't work for me. This error shows every time I export movie.
- Source File: C:\Users\addo\AppData\Local\Temp\Merianna_5.prproj
- Output File: C:\Users\addo\Desktop\Sequence 03.m2v
- Preset Used: Custom
- Video: NTSC, 720x480, 29.97 drop frame [fps], Lower, Quality 3,1
- Audio: 192 [kbps], 48 kHz, Dolby Digital
- Bitrate: VBR, 1 Pass, Min 1,50, Target 4,00, Max 7,00 [Mbps]
- Encoding Time: 03:10:33
17.5.2009 21:07:25 : Encoding Failed
Error compiling movie.
Unknown error.
And when i'm opning the same project with CS2 I get this messege when it loads the project.
C:\Users\addo\Documents\Adobe\Premiere Pro\3.0\Meriana.prproj
Video Transition missing: ADBE Dip To White
The format of the movies that I'm exporting is wmv and iv'e tryed exporting into other format like avi or wmv but the same result.
The hardware spec..
Intel Core 2 Duo @ 3.2 GHZ
Ram : 3 GB
8800 GT Nvidia 512 MB
Harddrives : 320 GB + 160 GB
Windows 7 RC1 (Could be the problem?)
Here are the site's that iv'e been shecked.
Error:Error compiling movie
dvinfo.net
Thanks for the help evry one...That error can happen for many reasons...one of the reasons that I occassionaly get it is because I try exporting a movie to an external drive that has been formated in the old FAT32 instead of the NTSF standard. FAT32 only allows for file sizes up to 2 gigs. And as soon as it reaches that...I would get that error. I don't know if that is why you are getting that error...but it would be easy to check. 1) are you generating a file that is over 2 gigs? 2) is your drive that you are exporting to FAT 32 (just right click the drive in My Computer and select "properties" then just look for what it says next to "file system".
-
When trying to sign in with 2 different apple id's that i use for year now, I get a message saying "unknown error". I succeed in signing in directly from my iphone though. What has changed?
You will need to contact iTunes support.
-
When i try to restore my ipad min it says unknowna error 14 and i cant restore it
When i try to restore my ipad min it says unknowna error 14 and i cant restore it
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
Cheers, Tom -
cant sync my iphone contacts with yahoo, it says "unknown error (4)" and tells me to come back later, been doing it for months. Any ideas on how to kill it?
Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David -
My itunes on my imac cannot stream my music by my airport express. It says unknown error (-15006). With my ipad it is no problem.
My imac has been working before.Hello JBrans!
Did you get help for this problem. Today I got the same problem. Now I don´t know what I can do anything. I did reset AirPort Express. New konfiguration. Nothing. Thank for help!
Kind regards
Falk H. -
So...I'm trying to transfer my itunes music to my laptop. I set up a new itunes on my laptop and, with great difficulty (I'm not technical), I've managed to be successful with the help of my memory stick, which saves wasting CDs.
However, for some reason a few tracks by a couple of artists don't seem to have transferred. So I had the idea to burn a CD and then copy that directly to my laptop.
There doesn't seem to be any trouble burning the CD - that works fine. I just select audio CD, and done within a minute or so. But when I then put the CD in my disc drive, it doesn't work.
It says 'track 1', with no other tracks for the entire CD. When I try to import it, it says 'unknown error -50'. I've tried tinkering with the import settings, but it makes no difference.
Does anyone have any ideas?
I'm not that computer literate, so please make it idiot proofYou can use the bootstrap tar.gz files that are found in the same directory as the iso on every mirror. If you go to the download page, select the mirror of your choice, you will see a file called "archlinux-bootstrap-2013.10.01-x86_64.tar.gz" (one for i686 also). That is what you need.
Unpack it whereever you think is appropriate, if you have enough RAM you can use /tmp. Then after setting up the partitions in the host (Kali/Debian, or whatever), you can arch-chroot to that unpacked directory. There you will find all the tools necessary to install (pacman and the arch-install-scripts).
This method has one issue though, and that is that the arch-chroot script (and maybe others) requires some pretty new versions of various things. In particular, I think that a pretty new version of bash is required. So I am not sure about the viability of this solution on anything debian, as their stable repos tend to be pretty conservative. It also means that you need to have a pretty good understanding of the install process, as you will still mostly follow the beginners guide, but it will require a few changes in the procedure.
Good luck. -
Error compiling movie. Unknown error. In both Premiere and Media Encoder
I am trying to export a a batch of six sequences, out of Premiere Pro CC to my internal hard drive using the Apple ProRes 422 Quicktime setting. All of the sequence exports are failing in the first couple of seconds. This happens if I do them individually directly out of Premiere and if I export them out as a batch to Media Encoder. All get the same "Error compiling movie. Unknown error." error message. I have tried restarting the computer, that didn't fix it. I had the same problem with some other files yesterday but I was able to export them out individually OK. But with this batch, no dice. The sequences are all fully rendered. There aren't any problematic clips in the sequences, not that I can tell. None of the sequences is very long, only about 1-2 mins each.
Any ideas?
My system details are:
MacBook Pro (Retina, 15-inch, Mid 2014)
2.5 GHz Intel Core i7
16GB 1600 MHz DDR3
Graphics NVIDIA GeForce GT 750M 2048 MB
plenty of space on my startup diskError Compiling Movie... some past discussions and ideas
-http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html
-http://helpx.adobe.com/premiere-elements/kb/error-error-compiling-movie-render.html
-and nested sequences http://forums.adobe.com/thread/955172 -
cant restore iphone it would loa half way threw then say unknown error why is it not working and its a iphone 3g 4.2.1
What is the exact error message you're getting?
-
Why i can't my password go through it keeps saying unknown error
i can't download any apps from the store bcuz it keeps saying unknown error everytime it ask me to put in my password...why is dat?. i was workin fine this morning
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>iTunes and App Stores and sign out and sign back in -
My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my phone on my computer it would begin the processes then half way through it would say IPHONE has been disconnected, now it won't recognize it or anything. what can i do? This is a brand new phone!!!
Hello jraff21,
I was able to locate a support article for the error you mentioned. The following steps may help you get your device back to working order:
iOS: Restore errors 4005, 4013, and 4014 - Apple Support
You may see one of these messages if the device unexpectedly disconnects during the update or restore or iTunes couldn't tell the device to go to the restore state.
The iPhone [device name] could not be restored. An unknown error occurred (4005).
The iPhone [device name] could not be restored. An unknown error occurred (4013).
The iPhone [device name] could not be restored. An unknown error occurred (4014).
Try these steps to resolve the issue:
Install the latest version of iTunes.
Restart your computer.
Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
Restore using another USB cable.
Learn more about updating OS X.
Learn more about updating Windows.
Restore your device on another computer.
If you continue to see error 4005, 4013, or 4014 when you restore your device,contact Apple for support.
Learn more about other update and restore errors.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
Any idea why I can't purchase stuff off either iTunes or AppStore? I am getting a message saying unknown error has occurred immediately I enter my password.
Brett,
Well done getting the wireless network secured.
You have to precede the (hex) password with a '$' in Mac OS, to tell the Internet Connect dialog box that you are keying a hex password (rather than ASCII). This is because the Mac has detected that the network is WEP protected, and leaves it to you to decide how you want to key the password.
As an alternative, in Internet Connect (or from the AirPort icon menu), you can elect to join an "Other" network. If you select your network again, it'll come up with "WEP Password" as the option of Wireless Security. You can change this to "WEP 40/128-bit hex" and then not have to precede your password with the '$'.
Alternatively, you could tell us the make and model of your wireless router and we can tell you how to set, and use an ASCII password. From your 10-character hex password, we can see that you're using 40/64-bit WEP. Non-Apple routers can be a bit fussy when using ASCII passwords with 40-bit WEP (don't worry, this is also true for Windows PC's using 40-bit WEP too), but we can talk you through it.
As a final alternative, as you have such a whizzy Mac, as long as your wireless router supports it, you could use WPA security, and never have to worry about ASCII / hex / '$', etc. Older Macs (particularly original AirPort cards - not AirPort Extreme - and OS9) were limited to 40-bit WEP. -
I cant purchase storage on icloud, it keeps saying unknown error, why?
i cant seem to purchase the icloud storage, it keeps saying unknow error occured, why? and i also cannot access icloud from the my laptop it also says unknown error occured, but i can open the website to access it. but why does this happen
I get the same unknown error occurred. I can't believe no answer yet.
I think it is Beta only for a few users.
Maybe you are looking for
-
My laptop can't boot after connecting it to a flatscreen using an HDMI cabble, any help-
-
Windows 7 home premium on 27" core i7 horrible slow!
I have an imac bought in 2012. It is the 27" version core i7 quad core version with 16GB of RAMM. When I run in bootcamp with windows 7 home premium 64bit applications etc, the mac is very slow in performance. Even my other PC (core i5) installs for
-
Asset Fiscal Year End Closing - Depreciation not posted completely in 2010
Hi Experts, I have an issue concerning AA 2010 year end closing, since there is one asset which depreciation in 2010 was not posted completely, meaning that we cannot close 2010 fiscal year. This happened because of the following situation: Vendor In
-
Standby database in same computer
I have made standby database in different computer then in production database in similar path and it is working. But whenever I try to make it in same computer it gives me error. I have gone through the oracle documentaion. But still I can't. Any su
-
I want to switch phones on my plan without switching my plan
I want to switch phones on my plan without switching my plan itself