Reoccurring Dirt Mark on MacBook Air Mouse Button
I have not had the paint come off yet, but I do have an odd spot on the mouse pad button that consistently attracts dirt and forms a black line of visible dirt I constantly have to rub off with the cleaning wipes I got from the Apple store. Visually the is no scratch that I can. When this happened before the finish eventually rubbed completely off and left an open patch to the bare aluminum on a Macbook Pro I had.
Took it to the Genius bar and it was just ho hum. No help there.
I use the Marware protection packs on all my laptops. (I just sold a still-working 2001 Titanium.)
See http://www.marware.com/MacBook-Air-Protection-Pack-Deluxe
There are others out there. Try a Google search.
Similar Messages
-
TS1440 Question Mark on MacBook Air
On my MacBook air, I cannot get the computer to start and get past a screen with a flashing question mark on it. I tried sticking in the USB for the OS X Lion but it won't work. Help!!
did you completley read the article that brought you here and try all the troubleshooting steps? If so and no luck, your ssd may have died.
-
As soon as i got used to the new mouse button on my MacBook Pro, it stopped working on the right side. This makes things such as the right click and clicking and dragging anything on the right side unusable. My question is: is this a common occurrence with these new buttons, and will it be able to be fixed without sending in my laptop?
Thanks in advanceIn System Preferences > Trackpad, is Secondary Click turned on and mapped to the lower right corner of the trackpad? If so, turn it off or map it to the lower left corner.
-
Why is my macbook air mouse/track pad unresponsive?
My macbook air track bar and mouse have become increasingly unresponsive. I finally bought a mouse. While visiting my sister and using her MacBook Air computer (mouse/trackpad), I realized I've got a serious problem. Any suggestions?
I passed one of my older Macbooks to my MIL. She has the same problem, and has resorted to an external mouse (which she prefers anyway). I am convinced that the issue is directly related to just how dirty, in general, I have observed the unit to be. The theory is that debris has infiltrated to the underside of the trackpad, thereby inhibiting movement for clicking.
The "tap to click" function seems to work just fine. I would ask if the setting in preferences has been set to "tap to click" on your trackpad, and whether "soft tapping" works or not for you? -
Help my MacBook Air doesn't open
Please help me I press my MacBook Air power button and it doesn't show me the apple logo it show me a file and a planet and after that my screen get dark and it says no bootable disc insert boot disk and press any key please help me the last time I it opened successfully please help me
Restart the computer and hold down the "option" key.
When startup disk selection window opens up select the startup disk.
Usually it is "Macintosh HD" unless you changed the name.
You can navigate by using tab key and selecting by pressing the return key.
Best. -
My macbook air won't turn on and keeps making startup noise.
My macbook air mouse wasn't responding and I had several windows of google chrome open, the imsg app open, and everything else was closed. I left it on, closed the screen, and returned to it. I was able to login, but the mouse wasn't responding. I forced shut it down, waited a bit, then tried to start it again only to find the screen remained white and kept repeating the startup sound.
Welcome to Apple Discussions
Unplug the mouse then try an SMC reset. -
Hello,
A flashing question mark appears when I re/start my MacBook Air 2013. Then, I pressed POWER & OPTOIN buttons and internet options appeared for internet recovery. After internet recovery, the OS X utilities appears with four options (Restore from Time machine, Reinstall OS X, Get help online and Disk utility). But none of them seemed helpful. On the last option Disk utility, the icon created only with 33KB and other disk 1 Mac Os X Base system. On First Aid, the icon Repair disk is disabled. So I could not click on repair disk. Could you please suggest me how to solve this problem asap? Thank you so much for your help in advance!You can try the following:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
i want to turn my macbook air off. the shut down button already appeared but the mouse/cursor just hang and won't work. even after pressing the enter button to shut my mac off won't work. what will i do?
This is not a reply. I just want to elaborate on this problem.
My computer freezes occasionally when it is used after being sleep for a while. The spinning ball appears and everything is totally disabled. Nothing on the keyboard works.
The mouse moves, but does not work.
The only solution is to turn the power off and on (losing all data in open applications.)
I kept the System monitor running on the side to find out which program was running when the computer froze. The Monitor as well as all other applications froze, but the data showed:
Firefox 18.4%
Activity Monitor 0.9%
Firefox Plugin 0.2%
This is all the information I have. By the way, I am using iMac with OS 10.6. -
Hi, i have a 2009 Macbook air, it has developed the problem above. Although it is the 2009 model it remained sealed and boxed until february last year,it has not had that much use so i am surprised that it had developed a problem after less than 1 years use.
James,
Sorry I am so lengthy. The problem is that with the technical support guy on line, when the Mouse button 4 event occurred I described to the tech that I was pushing and pulling the mouse from the back end to avoid touching the buttons on the side and every time I rolled the mouse a few inches forward the dashboard assigned to mouse button 4 appeared and next when I rolled it back the dashboard disappeared, I rolled it forward and it reappeared and so on. Then the tech wanted me to click on the apple and go into system preferences and as my cursor touched the file menu to get to the preferences that menu dropped without me left clicking the mouse. As I passed over edit and view they just dropped down.
What do you make of that? I am presently running OSX leopard without my printer and scanner installed. If I see no problem in two days, I will plug in the printer and install it. Then after that the scanner and see if the problem happens. I will follow your suggestions about relearning the mouse though.
Stephen
Stephen -
My MacBook Air, once pressed the power button, comes up with a file containing a question mark. I have tried re-starting it but this logo continues to appear and will not go. I cannot log onto my mac. Any suggestions as to what this is please?
You need to reinstall OS X:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
I have a Mid 2011 Macbook Air.
Upgraded to Yosemite last week.
Three days ago I was using my Macbook Air for the first time since upgrading to Yosemite. I had been using my Macbook Air for approximately 30 minutes, I was using safari and the keyboard and trackpad stopped working (would not respond). The only button that worked was the power button.
I rebooted and they were still not working. I plugged in a USB mouse and external USB keyboard, only one USB port would work (the Left USB port if looking at the screen) so I had to swap between keyboard and mouse.
After logging in there is a bluetooth icon at the top of the screen with a sawtooth line through it. Bluetooth is unavailable and the bluetooth icon is missing from the system preferences menu.
If I run a hardware test by holding D (on USB keyboard) at startup it says that no problems are found and at the conclusion of the test the keyboard and trackpad start working again. When I log on the bluetooth is working again.
I shut down the Macbook Air and when I started it again the keyboard and trackpad and right side USB ports were all not working again. I logged in using the USB keyboard and mouse and the bluetooth not available sawtooth icon had returned.
I ran the hardware test again and at the conclusion of the test the trackpad and keyboard started working again.
I have tried deleting com.apple.Bluetooth.plist and com.apple.Bluetooth.plist.lockfile from /Library/Preferences/ and tried resetting SMC and Power Functions but this did not fix the issue. The only thing that seems to work is running a hardware test - obviously I don't want to do this every time I use the computer.
I do not believe any hardware is faulty/damaged - I think it has something to do with bluetooth/Yosemite.
I do not have the Macbook with me at the moment, if you have suggestions that I can try or additional checks/info you require please let me know and I can get back to you.
Thanks,
JohnHi!
I have exactly the same problem, and I can't find any solution.
I can't even track down the root of the problem: the Bluetooth/Wifi module? The trackpad? The keyboard/top case? The logicboard?
I've tried all the usual: SMC/PRAM reset, clean install, kext cache clearing.
Any suggestion is greatly appreciated! -
Macbook Air won't startup, flashing question mark
Hello everyone, here's the problem:
Recently (Sep) I've bought a new macbook air (2012, 128gb SSD). After a few months of using it the following problem happened: while surfing on the web, my macbook hang up (I couldn't press anything or do anything, the system wouldn't respond), so I shut it down forcefully (by holding the power button), after this my computer wouldn't boot at all: a flashing questioning mark appeared on the grey screen. I know what it means (I'm an Intel engineer and know quite a bit on the subject), so I thought the SSD was dead. Brought it to the shop a bought it at (M-video, Russia, Nizhni Novgorod). After 21 day (sic!) they gave it back to me working fine and said that when they opened it - it worked OK, they tested it for 5 days with reboots and it was OK. After 1 month of using it after I got it back (today) it happened again: the OSx hang -> force shutdown -> question mark on startup.
Could you please tell what can it be? It's obvious that it's no a hardware problem (in this case it wouldn't happen from time to time but be a permanent defect after the first time it occurred). I tried all the recipes found on the internet (command + alt + P + R; R to get recovery mode - disk utility sees only 1 partition on disk0 of 1.8 GB (I guess it's partition with the base system) and won't let me do anything - all options are grayed out; SHIFT won't let me into safe mode - no idea why; etc.). I also don't have a CD or anything with the mac OS, however even Internet recovery won't help - no targets to install it when it comes to it.
Have tried almost anything and asked almost anyone among my IT-connected friends, but in vain. Thank you in advance for your help! Will appreciate any piece of advice.Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
If this fails then see: OS X (Lion/Mountain Lion)- About OS X Recovery. -
I start my macbook air up and a file comes up with a question mark. When I go to Disk Utility I go to update things or erase everything and my disks don't show up or anything. Anyone know what to do?
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
Boot From The Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
My Macbook Air 2011 got a white screen and a folder with a question mark. I tried to press option+r and try to install the OS X Lion but it didn't show the disk Macintosh Hd
You are using Snow Leopard so you have no OPTION+R shortcut. You need to boot the computer from your Snow Leopard DVD or USB flash drive.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
Early 2009 MacBook Air. On startup no keyboard or mouse me to login. Neither is the USB working so I cannot use an external mouse or keyboard either. If I keep restarting the machine suddenly sometime I get mouse and keyboard control and I am able to login and work. After sometime though mouse and keyboard Control is lost again and the machine hangs.
Lately another problem has cropped up. Now the machine starts up and seems to work for longer time but I have no 0 key and USB everything else is fine.
What could be the issue1. Reset PRAM. http://support.apple.com/kb/PH4405
2. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Maybe you are looking for
-
Print Queue suddenly stopped: OS X 10.4.10 and Bonjour via AirPort
I've been using an Intel iMac with no problems for many months: 2 printers attached: 1 inkjet via USB, and 1 HPLJ1200 via Bonjour through Airport/USB. System Version: Mac OS X 10.4.10 (8R2218), Kernel Version: Darwin 8.10.1 Suddenly, the Bonjour one
-
I have snow leopard 10.6.8 and want to get on iCloud which requires Lion... should I buy Lion at $29.99 now and upgrade to Mountain Lion when available (I can't see where it is available for download yet) and what is cost of upgrade to Mountain Lion?
-
How do I load a document to adobe?
How do I load a document to adobe?
-
What is the difference (& use) between CBP & MRP & FBP
Dear Experts, Can anyone please tell me what is the difference ( & uses ) between Consumption Based Planning & Material Requirement Planning & Forecast Based Planning? how are these linked to each other? Instead of sending Big Documents,Please tell m
-
Re: BADI + ME21N + internal table
My task is this below using BADI...........! plz give solution for this task.. 1> I will enter all the details in me21n to create Standard PO no... When i click SAVE button in me21n, BADI should trigger &what r the details entered in the screen m