Reoprts server itdrep already exists in the network

Hi
I have two AIX machines with different hostnames and have application server 10gR2 standalone installed on both the machines.I created a new report server with the name "ITDREP" on both the machines(same name on both the machines).
Now when i try starting the report server on machine1 it starts but after this if i try to start the reports server on machine2 it fails with the error "Reoprts server itdrep already exists in the network".
If I want to have a reoprt server with the same name on two machines what do i need to do??
Regards
Ankit

Hi
Thanks for the suggestion.
Can u please explan it briefly like how i need to do changes in the file rwnetwork.conf.It means the port that i should use.
My rwnetwork.conf file looks like this:
Machine1:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE discoveryService SYSTEM "file:/oracle10gAS/product/OAS/reports/dtd/rwnetworkconf.dtd">
<discoveryService>
<multicast channel="228.5.6.7" port="14021" timeout="1000" retry="3"/>

</discoveryService>
Machine2:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE discoveryService SYSTEM "file:/oracle10gAS/product/OAS/reports/dtd/rwnetworkconf.dtd">
<discoveryService>
<multicast channel="228.5.6.7" port="14021" timeout="1000" retry="3"/>

</discoveryService>
Thanks & Regards
Ankit

Similar Messages

REP-56040: Server repserver already exists in the network

Hi
When I call report from FORM I see the following error in OC4J console and form will get stuck
Version: Reports Builder - 10.1.2.0.2
Forms Builder [32 Bit] Version 10.1.2.0.2 (Production)
10/04/09 10:13:41 Not able to load oracle.reports.util.EnvironmentGlobal class
10/04/09 10:13:41 Using oracle.reports.util.Environment class
10/04/09 10:13:41 REP-56040: Server repserver already exists in the network
10/04/09 10:34:46 Forms session <1> aborted: unable to communicate with runtime
process.What could be the reason
Cheers
Shabar

Hi FormsEleven
Thanks for your reply
When run the following found only one server
C:\DevSuiteHome_1\BIN>rwdiag.bat -findall
Broadcast mechanism used to locate servers
Channel address = 228.5.6.7
Channel port = 14021
(1) Name = repserver : Type = server : Host = Shabar-PC
C:\DevSuiteHome_1\BIN>After done the said change I get the following error when starting the report server with the following command
rwserver server=repserver startError
REP-56114: Bind to naming server failed
:org.omg.CORBA.COM_FAILURE: vmcid: SUN minor code: 201
completed: No Cheers
Shabar
Edited by: shabar on Apr 9, 2010 5:23 AM

REP-56040: Server already exists in the network

Hi,
I use report server on a solaris 8.
When I stop/start it I get the error message:
REP-56040: Server already exists in the network
even when I properly shutdown it. I tried stopping the application server, killing all the process, the only solution I found was to reboot the server.
Do you know if their is a kind of lock file to erase?
Thanks,
Pierre-Yves
[email protected]

Hi FormsEleven
Thanks for your reply
When run the following found only one server
C:\DevSuiteHome_1\BIN>rwdiag.bat -findall
Broadcast mechanism used to locate servers
Channel address = 228.5.6.7
Channel port = 14021
(1) Name = repserver : Type = server : Host = Shabar-PC
C:\DevSuiteHome_1\BIN>After done the said change I get the following error when starting the report server with the following command
rwserver server=repserver startError
REP-56114: Bind to naming server failed
:org.omg.CORBA.COM_FAILURE: vmcid: SUN minor code: 201
completed: No Cheers
Shabar
Edited by: shabar on Apr 9, 2010 5:23 AM

"Already exists on the server"

I'm an old holdout on iWeb, still using it in November 2013. Since the Mavericks upgrade (I'm pretty sure that's when my problem started), after I publish, save, and quit, when I open iWeb up again, all the pages are red (on the leftside menu of pages), as if they're all changed and unpublished, even though neither is true. That's fine, but then when I make changes in iWeb and go to "Publish Site Changes," iWeb connects with my web hosting service and then gives me this message: "A folder with the name "Site" [this is my website's name in iWeb] already exists on the server. Do you want to replace it? Replacing it will completely overwrite the current contents of the folder on the server." Then I have the options of "replace" and "cancel." When I click "replace," iWeb uploads my entire website to the server again, and not just the parts that are changed. It's like, somehow, my web hosting service is making no connection to me as it used to. That is, it's treating me and my new content like it's all brand new and foreign. This is problematic because I have lots of video and audio content on my site, so the publishing of the whole site takes hours and hours. Once it's published, all's well online with my site, but how do I get iWeb to not republish the whole site again? Anyone know what's going on? Thank you!

Yes, "should" is the right word! As you suggested, I published the entire site, but when I then quit iWeb and reopened it, same thing: all left-column pages were red and the website & iWeb gave the same message ("A folder with the name "Site" [this is my website's name in iWeb] already exists on the server. Do you want to replace it? Replacing it will completely overwrite the current contents of the folder on the server.").
I suspect Mavericks is interacting with iWeb in some unanticipated way. That's certainly a guess. Any other thoughts/suggestions? Thanks!

How to check if the file already exists in the application server directory

Hi all. I'm on devsuite 10g.
I transfer file from local machine to application server using webutil function webutil_file_transfer.client_to_as and I want to check if the file I'm transfering already exists on the server directory.
How can I make this?
Thanks all,
Fabrizio

use the text_io package and open the file in read-mode.
like this
declare
xFileType text_io.file_type;
begin
xFileType := text_io.fopen('c:\temp\test.txt','R'); --file on the middle tier
-- file exists;
text_io.fclose(xFileType);
exception
when others then
--file doesn't exist
end;
regards
Christian

Weird CS4 error when saving eps files on a Mac: "...specified files already exist in the target location"

Hi There,
All 3 workstations in our studio are experiencing weird file behavior when re-saving eps files from Illustrator.
Basically Illustrator creates a new file in addition to the original and adds a "-01.eps" onto the file name. If you re-save your original, Illustrator brings up a dialogue box that states:
Some of the specified files already exist in the target location. The files marked below will be replaced:
filename.eps
filename-01.eps
We've been deleting the "-01.eps" files each time but it's becoming tedious. The behaviour occurs when re-saving an eps file to a server or the desktop.
All machines are new Quad-core MacPros running:
- Leopard 10.5.8
- Illustrator CS4 14.0.0
We've checked for Illustrator updates from within Illustrator but we seem to be running the latest version.
Is anyone else experiencing this behavior?
Any help or pointers in the right direction would be much appreciated.
Cheers
Ben

Thanks for the reply.
The error occurs when we save the document but if we choose save as, "Use Artboards" seems to be unchecked so not sure if this issue is related or not. Will re-save the document using save as then see if the issue persists.
Why do we still use eps?
Basically because we've found it to be much more compatible. Our entire logo library is in eps format (18 years worth) partly because it was previously the only format to use and partly because it allows account managers to send logos to clients, printers, TV stations etc and not involve the studio (saving out an eps version).
Although "Create PDF compatible file" is a good idea, we've encountered costly issues with colours and images - especially if the recipient is using old CS software, non-Adobe software or is using some kind of hardware RIP. We now just go with what we know works.
But I do find saving eps versions of everything to be a bit painful. In fact, I've always found Illustrator in general to be a bit painful when compared with Photoshop or AfterEffects. Illustrator seems like it's been developed by a different company some times!
Cheers, and thanks for the help.

Oracle RAC nodeapp 启动报错-vip:IP:192.168.2.200 is already up in the network

Linux redhat 5 Oracle RAC 10.2.0.5环境
启动nodeapp报错如下：
[oracle@rac1 ~]$ srvctl start nodeapps -n rac1
CRS-0210: Could not find resource ora.rac1.gsd.
rac1:ora.rac1.vip:IP:192.168.2.200 is already up in the network (host=rac1)
rac1:ora.rac1.vip:IP:192.168.2.200 is already up in the network (host=rac1)
rac1:ora.rac1.vip:IP:192.168.2.200 is already up in the network (host=rac1)
rac1:ora.rac1.vip:IP:192.168.2.200 is already up in the network (host=rac1)
rac1:ora.rac1.vip:IP:192.168.2.200 is already up in the network (host=rac1)
rac1:ora.rac1.vip:IP:192.168.2.200 is already up in the network (host=rac1)
rac1:ora.rac1.vip:IP:192.168.2.200 is already up in the network (host=rac1)
rac1:ora.rac1.vip:IP:192.168.2.200 is already up in the network (host=rac1)
rac1:ora.rac1.vip:IP:192.168.2.200 is already up in the network (host=rac1)
rac1:ora.rac1.vip:IP:192.168.2.200 is already up in the network (host=rac1)
rac1:ora.rac1.vip:IP:192.168.2.200 is already up in the network (host=rac1)
rac1:ora.rac1.vip:IP:192.168.2.200 is already up in the network (host=rac1)
rac1:ora.rac1.vip:IP:192.168.2.200 is already up in the network (host=rac1)
rac1:ora.rac1.vip:IP:192.168.2.200 is already up in the network (host=rac1)
rac1:ora.rac1.vip:IP:192.168.2.200 is already up in the network (host=rac1)
rac1:ora.rac1.vip:IP:192.168.2.200 is already up in the network (host=rac1)
rac1:ora.rac1.vip:IP:192.168.2.200 is already up in the network (host=rac1)
rac1:ora.rac1.vip:IP:192.168.2.200 is already up in the network (host=rac1)
rac1:ora.rac1.vip:IP:192.168.2.200 is already up in the network (host=rac1)
rac1:ora.rac1.vip:IP:192.168.2.200 is already up in the network (host=rac1)
rac1:ora.rac1.vip:IP:192.168.2.200 is already up in the network (host=rac1)
rac1:ora.rac1.vip:IP:192.168.2.200 is already up in the network (host=rac1)
crsd.log部分日志如下：
2012-11-21 20:10:16.831: [ CRSRES][2717907856]0startRunnable: setting CLI values
2012-11-21 20:10:16.967: [ CRSRES][2717907856]0Attempting to start `ora.rac1.vip` on member `rac1`
2012-11-21 20:10:44.246: [ CRSAPP][2717907856]0StartResource error for ora.rac1.vip error code = 1
2012-11-21 20:10:47.007: [ CRSRES][2717907856]0Start of `ora.rac1.vip` on member `rac1` failed.
2012-11-21 20:10:47.529: [ CRSRES][2717907856]0Attempting to start `ora.rac1.vip` on member `rac2`
2012-11-21 20:11:18.649: [ CRSRES][2717907856]0Start of `ora.rac1.vip` on member `rac2` failed.
2012-11-21 20:11:18.897: [ CRSRES][2717907856]0CRS-1006: No more members to consider
2012-11-21 20:11:20.986: [ CRSRES][2717907856]0startRunnable: setting CLI values
2012-11-21 20:11:21.190: [ CRSRES][2717907856]0Attempting to start `ora.rac1.vip` on member `rac1`
2012-11-21 20:11:48.846: [ CRSAPP][2717907856]0StartResource error for ora.rac1.vip error code = 1
2012-11-21 20:11:51.203: [ CRSRES][2717907856]0Start of `ora.rac1.vip` on member `rac1` failed.
2012-11-21 20:11:51.492: [ CRSRES][2717907856]0rac2 : CRS-1019: Resource ora.rac1.LISTENER_RAC1.lsnr (application) cannot run on rac2
请问如何进一步排查“rac1:ora.rac1.vip:IP:192.168.2.200 is already up in the network (host=rac1)”问题？感谢

ping信息：
[oracle@rac1 ~]$ ping 192.168.2.200
PING 192.168.2.200 (192.168.2.200) 56(84) bytes of data.
64 bytes from 192.168.2.200: icmp_seq=1 ttl=64 time=0.043 ms
64 bytes from 192.168.2.200: icmp_seq=2 ttl=64 time=0.126 ms
64 bytes from 192.168.2.200: icmp_seq=3 ttl=64 time=0.059 ms
64 bytes from 192.168.2.200: icmp_seq=4 ttl=64 time=0.158 ms
64 bytes from 192.168.2.200: icmp_seq=5 ttl=64 time=0.643 ms
64 bytes from 192.168.2.200: icmp_seq=6 ttl=64 time=0.034 ms
64 bytes from 192.168.2.200: icmp_seq=7 ttl=64 time=0.046 ms
64 bytes from 192.168.2.200: icmp_seq=8 ttl=64 time=0.043 ms
64 bytes from 192.168.2.200: icmp_seq=9 ttl=64 time=0.048 ms
64 bytes from 192.168.2.200: icmp_seq=10 ttl=64 time=0.031 ms
telnet信息
[oracle@rac1 ~]$ telnet 192.168.2.200
Trying 192.168.2.200...
Connected to 192.168.2.200.
Escape character is '^]'.
Red Hat Enterprise Linux Server release 5 (Tikanga)
Kernel 2.6.18-8.el5xen on an i686
login:
ssh信息：
[oracle@rac1 ~]$ ssh 192.168.2.200
Last login: Sun Nov 18 13:37:10 2012 from rac2-vip
ifconfig -a信息：
[root@rac1 ~]# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:0C:29:B6:CE:6B
inet addr:192.168.2.100 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:feb6:ce6b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:142396 errors:0 dropped:0 overruns:0 frame:0
TX packets:172561 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:41403126 (39.4 MiB) TX bytes:96009307 (91.5 MiB)
Interrupt:18 Base address:0x1480
eth1 Link encap:Ethernet HWaddr 00:0C:29:B6:CE:75
inet addr:192.168.2.200 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:feb6:ce75/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:14082 errors:0 dropped:0 overruns:0 frame:0
TX packets:29 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:9789756 (9.3 MiB) TX bytes:1434 (1.4 KiB)
Interrupt:19 Base address:0x1800
eth2 Link encap:Ethernet HWaddr 00:0C:29:B6:CE:7F
inet addr:192.168.3.100 Bcast:192.168.3.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:feb6:ce7f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:12665 errors:0 dropped:0 overruns:0 frame:0
TX packets:32728 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:6590271 (6.2 MiB) TX bytes:28437643 (27.1 MiB)
Interrupt:16 Base address:0x1880
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:30893 errors:0 dropped:0 overruns:0 frame:0
TX packets:30893 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:9402131 (8.9 MiB) TX bytes:9402131 (8.9 MiB)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

A key/value pair with this key already exists in the store

Hi all,
In the installation of PI components on the AS ABAP+ AS JAVA with finalization of the Java Addin the iam facing this problem :
In short it mentioning that the " A key/value pair with this key already exists in the store.", Please see below for more information....:
CJSlibModule::writeWarning_impl()
Execution of the command "/opt/java1.4/bin/java -classpath
/oracle/stage/PIDtemp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/sharedli
b/launcher.jar -Xmx256m -d64 com.sap.engine.offline.OfflineToolStart
com.sap.security.core.server.secstorefs.SecStoreFS
/usr/sap/PID/SYS/global/security/lib/tools/iaik_jce.jar:/usr/sap/PID/SYS/global/security/lib
/tools/iaik_jsse.jar:/usr/sap/PID/SYS/global/security/lib/tools/iaik_smime.jar:/usr/sap/PID/
SYS/global/security/lib/tools/iaik_ssl.jar:/usr/sap/PID/SYS/global/security/lib/tools/w3c_ht
tp.jar:/oracle/stage/PIDtemp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/l
ib:/oracle/stage/PIDtemp/sapinst_instdir/NW04S/LM/AS-JAVA/ADDIN/ORA/CENTRAL/CI/install/share
dlib:/oracle/client/10x_64/instantclient/ojdbc14.jar insert -s PID -f
/usr/sap/PID/SYS/global/security/data/SecStore.properties -k
/usr/sap/PID/SYS/global/security/data/SecStore.key admin/host/PID tern" finished with return
code 2. Output:
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
A key/value pair with this key already exists in the store.
ERROR      2007-02-15 18:35:29
           CJSlibModule::writeError_impl()
CJS-30051 Cannot insert a key value pair into the secure store fails; see output of log
file SecureStoreInsert.log:
SAP Secure Store in the File System - Copyright (c) 2003 SAP AG
A key/value pair with this key already exists in the store..
ERROR      2007-02-15 18:35:29 [iaxxgenimp.cpp:731]
           showDialog()
FCO-00011 The step insertAdminDataInSecStore with step key
|NW_Addin_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|8|0|NW_CI_Instance_Configure
_Java|ind|ind|ind|ind|4|0|insertAdminDataInSecStore was executed with status ERROR

Hi Kamalakar
I think this problem happens due to wrong content of SDMKIT.JAR - incorrect crypto SDA is deployed.I dont know the installation procedure you followed because normally this error wont come.
I would rather suggest a work around seeing your problem
<b>Edit the keydb.xml exchanging [ERROR] with [OK]</b>
Follow the above step and restart your installation.
Do not forget to reward points:

Win App Deployment include SQL 2008 Express - Check if any SQL Server version already exist

Hi there
I have a application that is deploying and installing correctly (Setup and Deployment Project in VS 2008) and has SQL 2008 Express as a pre-requisite. SQL Express installs fine if not found but I don't want it to be installed if any other version of SQL
Server already exists on the target computer. What do I have to adjust in the Bootstrapper package (package.xml or product.xml) for SQL Express to do this check? Is the change done within the Bootstrapper package? Do I have to create a Custom Action
in my Deployment project for this check? Any help is appreciated.
Thanks
Dweezil

Hi Dweezil,
If you use SQL Express Bootstrapper, you can add the SqlExpressChk.exe package file in the product.xml to check that if SQL Server is already exists.
However, please note that SqlExpressChk.exe is limited to only the default instance name, SQLEXPRESS, it won't detect other named instances. A registry check is required when detecting existing SQL Server with custom instance name.
For more details, please review this
blog.
There is also a similar thread for your reference.
https://dotnetinstaller.codeplex.com/discussions/245326
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.

This entry already exists in the following table ALR2

Hi All
A client gets this message when trying to add a sales order.
They copy it from a quote, but when they click add they get this messge :
"This entry already exists in the following table ALR2"
This is happening for every user and for any quote..old and newly created quotes.

Hi Experts,
I am at the client currently and there has been no recent upgrades,they are on PL 46.
I also checked the alerts and they have no alerts set up on SAP?
Also tried to restart the server??
There is one superuser and when he logs in there is no problem.
He can add sales orders etc. - no problem
Thank you,
Kind Regards,
Alexander
Edited by: Oberholzer Alex on Oct 16, 2009 10:13 AM

PROBLEM: Trying 2 add an AIRPORT EXPRESS to an already existing AIRPORT EXTREME network

I'm trying 2 add an AIRPORT EXPRESS to an already existing AIRPORT EXTREME network in my home.
I see the EXPRESS in ARPT UTILITY but when I click on "CONTINUE" or "MANUAL", the only option I'm given is to SWITCH networks, which I do not want to do.
I am using a MACBOOK PRO (MAC OS X 10.6.8)
Can someone offer me help with this?
Thanks!

Hi, I have a similiar setup. When you click onto the express, and it asks you to switch networks, it's not actually asking you to "change" networks. It's just actually switching to the xpress. When the xpress comes up, you'll input the name of your existing network, which you set up and named for the extreme. You'll have to change the extreme to "participate in a network", which is what you'll also do for the xpress. In the extreme under the WDS tab, you'll input the wds mode as "wds main". And then put a check mark in the "allow wireless clients". Where it says wds remotes, you'll input the the airport id's for the xpress's. In each of the xpress's, you'll set up as participating in a wds network. In the xpress's, under the wds tab, you'll set the wds mode to remote, and check
mark in the allow wireless clients. You'll have to input the airport id of the extreme in the wds main block. Under the internet icon on top, in internet conect tab for connect using: airport (wds), connect sharing: off (bridge mode).
Remember to insure that the express's show the same channel as the extreme, if you're using 802.11n (80211b/g compatible). Of course the security that you decide to use should also be the same.

PSE 9 and 5 will not import - says the file already exists in the catalog !

I've already wasted 2 days looking for answers to this. When someone buys this program, at least half of the price is paying for the database in the Organizer - yet even John Ellis himself, who seems to know more than anyone about it, has gone to Lightroom. This is bad coding!!!
Upgraded from 5 to 9. If you read my previous posts, this took 2 days too, and phone help from a tech, because it would not install in my XP computer. It did upgrade the Organizer from 5, although many of the symbols are unusable and don't work to help me identify my tags. However, now I see that neither 5 nor 9 is able to look at a file and display thumbnails that are in it.
I move files around a lot for my business. Any half-way good database should be able to find the missing files, and also add any new images. Say I have 10 images in file A, then add 2 more to make 12. It can't see the added images! Says can't import, the file already exists in the catalog.
I tried: updating thumbnails, recover, repair, in both 5 and 9 - nothing works. to import the images that I can SEE in these folders! I read here that it will not import files if the same name is somewhere else. That alone is a problem. But I think it's more than that: even if the file used to be in another folder, folder B, it won't recognize that it's in folder A now!
Since PSE9 uses sql db, shouldn't that be better than 5 and be able to do simple tasks like this?
Any advice or similar experiences eagerly welcomed.

Thank you for replying, dj paiqe.
Do you mean the first little section that says photos may not be displaying? Yes, those just reveal hidden photos and are very basic. I did them.
I guess we disagree about databases and what they are designed to do, or maybe I didn't explain this well.
I did not move the images outside of the catalog: I move them to various folders, all already imported WITHIN the catalog, as I send them to various editors. (these are all drawings, not photos, and I do this professionally, so it needs to work).
Folder A and Folder B and Folder C have already been imported into the catalog. So if I move 2 images from folder B into folder A, the Organizer is simply lost, says image already exists, and everything is totally screwed up, as the image is no longer in folder B, and it can't find it in folder A!!! The problem is, unless I memorize the image name, say Image 9, I can't tell it to reconnect, as there is no longer an image in front of me! So there are 2 images, without names, now nowhere to be found. Inefficient, to say the least.
I've never tried Lightroom or Filemaker, but I cannot believe that they would lose data like this. I think it's the Folder coding that's not working in PSE, and I wanted this to work so badly!!!!!
I am willing to do it the PSE way, since you now have captions, keywords, etc, and it is a very powerful database, when it works. I understand that one is supposed to move images within the Organizer, obviously. But now many images are disconnected. I could start all over importing, but is there any way to do that without losing tags and categories?

Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

in OIM 11g R2
Message was edited by: 2b3c0737-074f-48d0-a760-e24e3ed9a37c

This Entry Already Exists in the Table (UDO1)

Hello All,
I have created a Document Type Form with one Document and one Document Rows Table .
Their is no Manage Series option checked in the Registration as it is without any series.
Now the entries were going smoothly untill the record no. 116 then after that the user tries to add the document no. 117
system is showing an error message " This Entry Already Exists in the Table ( UDO1) " and the data is not getting added.
I have checked the Header & Line Tables both tables conatins data upto 116 record.
But still is not getting saved.
Their is no Series feature in this form (No Manage Series ) the numbering the going as per SAP .
Please suggest how to solve this problem without hampering the already entered data.
Thanks & Regards,
Amit

Hello Amit,
Sometimes the restore document numbering function from help makes miracles....
By the Way, please check your UDO tables and look for keys, docentries, etc,
Regards
János

File 'Form1.resx' already exists in the project

Dear Everyone,
Could you help me to solve the File 'Form1.resx' already exists in the project. when I put my form under a sub folder?
I tried to copy the 'Form1.resx' from project base folder to the sub folder, the Visual studio 2010 C++ complied but the software hang at:
this->Icon = (cli::safe_cast<System::Drawing::Icon^ >(resources->GetObject(L"$this.Icon")));
I am using Visual studio C++ 2010.
Here is an explanation from someone with the same issue:
"if you create a new Windows Form in a C++/CLI application and choose to save the .h and .cpp files in a location other than the project folder - for example a sub folder below the sub folder - the form gets created ok, but when you try to change
anything on it you get an error message saying:
"Could not find the file: <path_to_project_folder>\<subfolder>\<form_name>.resx"
If you try to save the changes you get another error message saying:
"File <path_to_project_folder>\<form_name>.resx' already exists in the project."
followed by another error message:
"Error HRESULT E_FAIL has been returned from a call to a COM component."
Regardless of where you save the .h file, Visual studio creates the .resx file in the project folder and then looks for it in the same folder as the .h file, and can't find it!"

Hi Shu Hu,
I followed you suggestion and the issue was still there. I got the software crashed at:
this->Icon = (cli::safe_cast<System::Drawing::Icon^ >(resources->GetObject(L"$this.Icon")));
Here are my steps:
1. Create a subdirectory
2. Add new form under new sub-directory
3. Change form icon from "Properties" tab
4. ignore error
5. copy the *.resx from the root of the project to sub-directory
6. close and reopen the project
7. remove *.resx from project Solution
8. Add *.resx under sub-directory to Header Files
9. Add some code to call the form.
10. Build & run
I saw this issue reported at least since VS C++ 2005 and it seemed there is no fix.
I tried these steps to reproduce this issue. But my project works well on my side. According to your application hang at : "this->Icon = (cli::safe_cast<System::Drawing::Icon^ >(resources->GetObject(L"$this.Icon")));"
I guess you may forget one step, could you try open the .resx file and click add resource -> add existing file. I guess your icon file didn't embed in resx file.
How to report this issue to Microsoft development team so they can fix it?
I cannot reproduce this issue. If you have a sample to reproduce this issue, you could submit this issue to
microsoft connect. I am also glad to test your sample on my side, and you could share it on a public Onedrive folder with me.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Reoprts server itdrep already exists in the network

Similar Messages

Maybe you are looking for