Reordering Leaf member attributes using the Front end

I am trying to reorder leaf level attributes of an entity using the MDS Webpage. Whenever I try to reorder, I get an "Unknown Error Occured" message. After I close IE and open the MDS Webpage again, the attribute is re-ordered. Has anyone
else faced this issue?
Thanks

This an obscure tag I've not thought about for a while.
If memory serves me well, the <frontend> tag works with OC4J standalone only.
If you have Oracle HTTP Server in front of OC4J and requests being routed via mod_oc4j, then the servername and port values will be set to the value of the Oracle HTTP Server.
You don't say what version you are using, but I just tried it with an OC4J 10.1.3.1 standalone and it works as described.
Putting the following in default-web-site.xml:
<frontend host="foo.bar" port="80"/>
And then displaying the values using:
<pre>
<%=request.getServerName()%>
<%=request.getServerPort()%>
</pre>
Returned:
foo.bar
80
Stripping the <frontend> tag from default-web-site and restarting the server showed the output as:
localhost
8888
Interestingly accesing the Application Server Control home page with the <frontend> set results in an error since the first thing ASC does it to a redirect -- and it tries to redirect the client to http://foo.bar which doesn't exist.
If you are using Oracle HTTP Server, then you may need to use some virtual-directory magic to set up the virtual host entries to pass along from OHS to the OC4J instance.
cheers
-steve-

Similar Messages

RPM - How to re-process prices without using the front end.

Hi all,
There is a way of re-processing prices without using the front end? For instance, using the front end, a new clearance is created state in rpm_clearance ‘pricechange.State.conflictCheckforApproved’ and changed for ‘pricechange.State.worksheet’ after the conflict check.
Now, I want to re-process the same clearance without using the front end. I’ve tried to change again the STATE to ‘pricechange.State.conflictCheckforApproved’ but no success. Any suggestions?
Thanks in advance.
Regards

Can you please attach your VI?
Prashanth N
National Instruments

Updated attribute not showing up in the Front End

Hi,
I have to update an attribute column based on some conditions.
Even though I have updated, the updated value is not showing up in the front end
Moreover if I go to Diagnostics-> Examine and then query the attribute value I can see the updated Result
What can be the reason...
Please Advise
Rahul

Sounds like the Statement is not committed. Maybe you should add a
COMMIT;
at the end of your query.

Getting iBrowser values in the front end using function

I have created the iBrowser by setting the value to Datalink for defaultitem in iBrowser and i tried to get the values of the iBrowser using function as
function value=Applet.getBrowserObject().getselecteditem();
but it doen not displays any values in browser field in the front end.
Please help me how to get values in the browser.
Thanks,
Rajendra.

Rajendra,
You change the function as below and try
function value=Applet.getBrowserObject().getselecteddatalinkvalue();
maybe this works in your case.
Thanks,
Nagi

What are the front end tools & components needed to use Visual composer.

Hi all,
please help for the following queries.
1.What are the front end tools & components needed to use Visual composer.
2. Is it possible to view in internet explorer web reports/ Dash boards created in Visual composer.
3. How to create Webreports & Dash Boards in Visual composer.
It's Urgent waiting for responses.
Thanks & Regards,
Basava Raju

Hi James,
For Visual Composer no need any Front end tools.. you need portal connection.. to configure your visual compoer.. the visla composer it self contain all the items.. just like a Webtemplate..
all the reports.. that web based reports or dash boards we can view through Browser only..
for creating reports in visal composer.. just go thru this links..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c6b2d590-0201-0010-42ba-a53a5d422310
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7d48d999-0701-0010-5790-8b2c5ae7107d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1752b737-0401-0010-0ba3-87c3eda8c6ce
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cab252d4-0a01-0010-3984-ee345859dde6
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01c5d690-0201-0010-668a-b8d97d51a566
for How to Guides - Visual Composer.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/16244247-0a01-0010-3294-d81c21e7e86e
/people/marcel.salein/blog/2007/02/01/visual-composer-and-abap-rfcbapi-a-powerful-combination-part-i
/people/marcel.salein/blog/2007/02/02/visual-composer-and-abap-rfcbapi-a-powerful-combination-part-ii
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01c5d690-0201-0010-668a-b8d97d51a566 https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/16244247-0a01-0010-3294-d81c21e7e86ehttps://www.sdn.sap.com/irj/sdn/visualcomposer
regards
@jay

How to Edit the xml node value using flex from the front end UI

Hi All,
I am having a use case with flex 4.6
1> To read the external xml file
2> Display the tree structure in the front end UI
3> Edit the node values of the xml file from the front end UI and save it back
How to go about the above use case, any blogs or links on the above case will be help
Thanks,
Alok

Check this is example:
http://blog.flexexamples.com/2009/07/23/deleting-nodes-from-an-xml-object-in-flex/

Is there a way for users to add products in the front-end using a Web-App?

I am racking my brains trying to figure out a way to let users add products to the front-end on their own.
I am building a site for a client who needs users to be able to create there own storefront, kind of like ebay. Here is exactly the functionality I want: Supplier Frontend Products Upload - Magento Connect
There HAS to be a way to do this with a web app even if it means writing in some code...can anyone suggest a way to do this?

In short, out of box no, but is possible.
Solution 1: Hosted on BC, external interface that interfaces with BC API, requires external hosted server.
Solution 2: Wait until v3 of the API comes out... no timeline from Adobe given. This would remove the need for the external API server.
Can do both solutions for you but solution 2 wont work until adobe allows it.

Associating member attributes using HAL in Essbase and Planning

Has anyone used HAL 7.0 to associate member attributes using either the Essbase Adapter or Planning Adapter? We are trying to upload the attributes to the members using a flat file but there isn't very good documentation in the HAL user guide regarding this. Any help would be appreciated.ThanksChris

Hi, These db's are recently migrated from back end. Are there any issues with the db's?

To avoid writing database code in the front end

Hello,
I am working on a database application using 10g database as backend and dotnet as front end. I wish to execute only oracle stored procedure for all the select (to avoid hard parse and use of bind variable), DDL and DML operations; just to avoid writing database code in the front end. Can anyone please give me a little examples of :
1.Select query's output to be return as resultset by stored procedure.
2.DML example by stored procedure.
3.Any DDL example by stored procedure.
using scott.emp, so that i would just call the stored procedure, rather than giving select,DML and/or DDL commands in the front end. Even though i have read in the documentation, but a clear cut examples will help me to get into clear concept as well.
Thanks & Regards
Girish Sharma

Hi...
-->Select example
create or replace procedure get_emp(rc out sys_refcursor)
is
begin
open rc for select * from emp;
end;
-->DML example
create or replace procedure do_dml_emp(pempid in number,
pempname varchar2,
result out number)
is
begin
insert into emp(empid,empname) values(pempid,pempname) returning empid into result;
exception
when others then
result:=-1;
end;
-->DDL example
create or replace procedure ddl_emp(colname varchar2,
coltype varchar2,
result out number)
is
begin
result:=-1;
execute immediate 'alter table emp add column ' || colname || ' ' || coltype ;
result:=1;
end;

Diagram Not getting displayed on the Front End UI in SSM 7.5

Hello ,
We are running SSM 7.5 SP 04. We uploaded a custom image using diagram manager for the required context in the administration UI. The image is uploaded successfully. But , when I open the strategy tab for my context in the front end UI , I am getting a "HTTP 500 Page cannot be displayed error".
I restarted the listeners and the JPIP sessions as well. But still the error persists. Please advise.
Thanks and Regards
Vijay

Vijay,
It is possible to successfully upload a strategy map into Diagram Manager and still not see it in the User Interface. After loading the goal diagram has to be Published To Server. You do that in Diagram Manager.
You can upload a strategy map and Save that in Strategy Default in Administrator Interface, but unless you Publish it, it will not be exposed to the end users.
In the Set Strategy Defaults area of the Administrator Interface, in the Create or Edit Goal Diagrams section. The Goal Diagram you loaded should have a Publish Date next to it. If it says Not Published, you need to Edit that Goal Diagram in Diagram Manager,
In Diagram Manager under FILE at the top, choose Publish to Server.
You now should see a Publish Date in the Administrator interface and Saving it will now make it available on the user side.
Regards,
Bob

Lync 2013 Enterprise load balancing on the front end and edge pool

Hi,
I am setting up a Lync 2013 Enterprise deployment consisting of a Front End pool (x2 FE servers) and an Edge pool (x2 Edge servers). I'm seeing some conflicting advice regarding load balancing using hardware or DNS for the front end and the edge.
On the front end I have 2 internal DNS records 'lyncfepool1.contoso.local' each of which map to one of the IPs of the FE servers. I've used my details to populate the Detailed Design Planner excel spreadsheet and am told that I require a HLB to load
balance my front end pool. I'm aware of the need to load balance HTTPS traffic internally (which will be done by TMG) however other traffic to the front end (SIP, etc) can be balanced by DNS only, and not require a HLB?
Can someone clarify the front end requirement?
Also - looking now at the edge pool - this site again have two edge servers in a pool. We are using a total of six private IP addresses, two per edge service (2 x av.contoso.com, 2 x sip.contoso.com and 2 x webcon.contoso.com). These will be
NAT'ed by the external firewall and directed to the respective external (DMZ) IP addresses on the Edge servers on port 443. I know this isn't true roundrobin due to the intelligence of the Lync client when connecting (in that the Lync client will connect
to one of the public IPs and if it can't connect, it will know to connect to the other service IP), however I want to clarify this set up, particularly the need to direct the external public IP traffic at the DMZ Edge IP specified in the topology builder.
I've attached a basic diagram of the external/DMZ/Edge side which hopefully helps with this question
Persevere, Persevere, Per..

That is because you will always need HLB for a front-end server since it hosts the Lync webservices which use HTTP/HTTPS traffic.
The description on the calculation tool also describes this correctly:
Supports Standard and Enterprise pools (up to 12 nodes), with pure device-based load balancing or a combination of DNS load balancing and device-based load balancing (for
Lync web services)
You can use either Hardware or DNS loadbalancing for SIP traffic only, but you will always need a HLB for the webservices. Both are applicable for the Front-End so you have either
full HLB for both SIP and HTTP(S) traffic
DNS LB for SIP traffic and HLB for HTTP(S) traffic
Hope this is more clear :-)
Lync Server MVP | MCITP Lync Server 2010 | If you think my post is the answer to your question, please mark it as answer so future visitors can easily find it.

How do I create data-driven linkbuttons whose visibility is controlled from the front end?

I've made a component based on a mx:TitleWindow that contains linkbuttons that I'm using as a context-menu.
The TitleWindow component contains link buttons like this:
[Bindable]
private var _showEmailThis:Boolean = false;
[Bindable]
private var _showApproveThis:Boolean = false;
[Bindable]
private var _showReviewThis:Boolean = false;
<mx:LinkButton id="lnkEmailThis"
               visible="{_showEmailThis}"
               includeInLayout="{_showEmailThis}"
               click="lnkEmailThis_click()"
               label="Email this!" />
<mx:LinkButton id="lnkApproveThis"
               visible="{_showApproveThis}"
               includeInLayout="{_showApproveThis}"
               click="lnkApproveThis_click()"
               label="Approve this!" />
<mx:LinkButton id="lnkReviewThis"
               visible="{_showReviewThis}"
               includeInLayout="{_showReviewThis}"
               click="lnkReviewThis_click()"
               label="Review this!" />
This component contains a large number of links and is re-used by multiple modules in the same application.
Within each module, this component is used when a user clicks on a row in a datagrid.
The code looks like this:
In "Requests" module:
private function dgRequests_click(event:MouseEvent):void
    menu.showApproveThis = true;
    menu.showReviewThis = true;
In "Performance" module:
private function dgPerformance_click(event:MouseEvent):void
    menu.showEmailThis = true;
    menu.showReviewThis = true;
As you can see, the visibility of individual linkbuttons is controlled within each module by setting boolean properties.
If I alter this component to use a renderer, how can I control the visibility of the linkbuttons from the code in each module (there are over a hundred links with different functionality - not every link will be used in each module)? Note: it is not known from the back-end which grid within which module uses which link. This is set in the front end within each module's actionscript file.
e.g., if the XML looks like this:
<links>
   <link>
      <label>Email This</label>
      <visible>_showEmailThis</visible>
   </link>
   <link>
      <label>Approve This</label>
      <visible>_showApproveThis</visible>
   </link>
   <link>
      <label>Review This</label>
      <visible>_showReviewThis</visible>
   </link>
</links>
and I set the Email link to show in the module like this:
private function dgPerformance_click(event:MouseEvent):void
    menu.showEmailThis = true;
How do I make it take effect? Is there a way to control the visibility of a linkbutton within an item renderer in a component from the module that uses that component? Is there something like reflection in the Flex framework?

Put a single frame sequence structure around your stop button and then wire from the error cluster going into the error handler to the edge of the sequence structure. Now your code will stop at the end of the current iteration. To see why this works, watch you code execute with execution highlighting turned on and review the section of the manual talking about "Dataflow".
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How to place an image in database and how to retrieve and display it in the front end

how to place an image in database and how to retrieve and display it in the front end
and to place an image in database and retrieve the image from database using xml
please,help me out.

Create a table with a Long RAW Datatype column for storing the Image Column Data.
Create the form based on the table , which by defaults the column with LONG RAW atatype to a Image Item.
You can use Forms Built in function READ_IMAGE_FILE to read a Image file stored on the file system in to the image item.
A save on the form saves the image in the Image item in the long raw column.

To change the layout of the front end

I am working in c projects it is a web enabled server at the front end and at the back end it is sap
I have to make changes in front end to add two i/p fields and backend it should update the sap table
Please help
Regards
Abhijit Chitre

Hi,
Welcome to SDN.
Could you give us information about the web application on the front end, is it using BSP ?
It sounds like you want to modify the standard, is that OK for you ?
Have you already located the BSP application (if any) in charge of the processing ?
Best regards,
Guillaume

General Error has occured.Object does not exist error in the front end

Hai,
In the rpd , I have imported 2 new tables to the exisiting connection pool from 2 diferent schemas and used those 2 tables to the existing model in the physical layer and given joins .
I did everything till the presentation layer and when I am trying to pull data from the added table in the front end it is giving me error saying that the oject does not exist.
Also I tried to see the data in the physical layer in rpd and the same error came up
Any solutions please

863997 wrote:
Hai,
In the rpd , I have imported 2 new tables to the exisiting connection pool from 2 diferent schemas and used those 2 tables to the existing model in the physical layer and given joins .
I did everything till the presentation layer and when I am trying to pull data from the added table in the front end it is giving me error saying that the oject does not exist.
Also I tried to see the data in the physical layer in rpd and the same error came up
Any solutions pleaseOnce again you are invited to How to extract the keys from the ER STUDIO.
Seriously: I am genuinely interested in why members of the BI and eBS community with no history of using the APEX forum persistently use this as a dumping ground for off-the-wall requests. If we can find this out then there might be a (remote) possibility of getting something changed on OTN to prevent it and avoid wasting everyone's time.

Reordering Leaf member attributes using the Front end

Similar Messages

Maybe you are looking for