Reorganization of Credit data :

Dear SAP Experts ,
We have changed the Risk categories of some of the CUstomers . Now I have run the reorganization of the Credit Data.
We have the following Message the NEw Credit Limit was created.
Where can I view that what was changed and of which CUstomers.
regards,
A S

Dear Gurunadh Kollipara,
I have recreated the FI and SD data for the reorganization.
Now in the FCV3 Report I can see there is double entry in the of all the Customers.
The Payer Column there is one entry X and the other is Blank for each Customer.
*The following is the help documents of the P( Payer:)
FI checks only against current payer
Indicates that credit checks against open items, oldest open item, and the highest dunning level are carried out using the open items and the dunning level of only the current payer (and not with data from all payers who are assigned to the credit customer).
Note
This is only the case if the payer is copied into the document on the basis of the partner determination procedure.*
Why there is dual entry the report for all Customers.
Please explain.
Edited by: SAP Consultant on Dec 9, 2008 12:02 PM
Edited by: SAP Consultant on Dec 9, 2008 12:23 PM

Similar Messages

  • UPDATION OF CUSTOMER CREDIT DATA IN CONTRACT

    Hi all
    We have a scenario where the payer is changed in the Sold to party and we can see the change done in contract(payer).
    But we observe that the Customer credit data does not change.It is still picking the old payer's
    credit data!
    Any one could help us in resolving this issue.
    Regards
    Srikanth

    Dear Freind,
    You have Changed the credit Data in FD32 or the Payer in Customer Master . for This I believe you need to Carry out Reorganization of FI & SD credit Data .
    Please run the report : F.28 and recreate the Credit Data .
    Hope your Problem Will be solved.
    regards,
    A S

  • Tables for Credit data

    Hi all,
    please tell me the tables  for Credit data.
    Thanks,
    kishore.

    1) Check to see if there are any entries in table S066 and S067. These SIS tables hold the credit data for sales order value and delivery order value.
    hope it helps

  • Credit data inconsistency

    Dear Experts !
    Please help me in the below credit management scenario.
    User observed some inconsistent data in transaction -VKM1 with respect to the FD33 screen . I checked the data in RVKRED88 report and found that open order value of the sales order-XXX was much lesser than the credit value of the same sales order in VKM1 transaction.
    Could you please tell me whether the open order value in the report RVKRED88 is correct or that shows in VKM1 is correct and how to rectify this data inconsistency.
    Thanks in advance !
    Sandeep

    Dear Sandeep,
    There are two programmes to correct the Credit data inconsistency
    First use the Program RVKRED77. the you can use the second Program RVKRED88. in SE38 transaction enter the programme then click on execute or press F8
    There system will ask you to maintain the selecction criteria.
    RVKRED77
    Credit account
    Credit control area
    RVKRED88
    Credit account
    Credit control area
    Document number
    Best Regards,
    Mh

  • Credit data Message no. V1677

    Hello experts,
    After entering VA32, I press enter. A message pops up below. Why such a message pops up? You know, I have not changed anything as I just press enter. If I change price / payment terms, any impact? Thanks.
    "Credit data will not be redetermined
    Message no. V1677
    Diagnosis
    Because the document has changed, new credit data, new payer data or another credit control area has been created.
    System Response
    The system will not create any new credit data."

    I believe, if there is a change in Credit Control Area, then system will pop up this message.  If not, have a look at the following notes:-
    Note 1587661 - External number assignment: Error message V1 677 displayed
    Note  432507 - Credit status is lost after the payer is changed
    G. Lakshmipathi

  • Credit data in Biller direct

    Hi All,
      I am working on UCES Biller direct portal in which we have a CREDIT tab .
    Firstly,I want to know that is it referring to the credit data or the creditworthiness.(I suppose its credit data).
    Secondly, If it is credit , where can i actually see this credit data as it is not refecting in my portal. Even though i can see all other data related to payments through FPL9 and on the portal as well except this on portal.
    Is it something else that is missing from my side for the credit data to be seen on the portal?
    Please suggest.
    Regards,
    Richa Tyagi

    Hi still you are looking for answer? let me know

  • Recreation of Credit Data puts Delivery notes on hold

    Hi All,
    We run the standard SAP report RFDKLI20 any time we change a credit limit on a customer. This updates the backlog with the new Credit limit. It also updates the delivery notes which had already been approved to ship and are in process at the warehouse (eg: not yet goods issued). This program places the delivery notes back on referral to release again.
    The requirement is that the backlog update should not have any affect on existing /created delivery notes that have not yet been goods issued and shipped. Please provide me some pointers on how to achieve this.
    Regards,
    Praveen

    hi
       report which you have specified is f.28 transaction and while using this system recreates the credit data irrespective of open /approved/released /status of sales order/open delivery /open picked delivery/ docs.
    so if you want system not run thru all open del/open picked del docs,which are already released from credit check ,then for those credit controll area u should not assign the credit check rule B and C ,so that when u run the below report system doesnot behave like what u have mentioned.
    reward if helps !!!!!!

  • Reorganization of credit limit.

    Hi All,
    We have an issue on SAP  related to wrong credit data. In order to fix this, we need to run a program RVKREDSP  that will block the sales tables (VBAK , LIKP, and VBRK) for ALL  locations.OSS Note-363343.I don't want to block the tables to run the program
    Please can provide the alternative OSS note or etc..to recorganization of credit limit to unblock the tables.
    Thanks

    Do you consider programs RVKRED88 (simulation) and RVKRED77?
    Hope this helps.

  • ORDERS05 IDOC - ZTERM "Critical credit data changed" problem

    Hello everyone!
    I have configured a scenario where XI sends an IDOC (ORDERS.ORDERS05) to an SAP system to create a Sales Order (SO).
    I have a problem with the Payment Terms (...EDI_DC40/ZTERM) field. Whenever I send an SO with the ZTERM field mapped, I get an error "Critical credit data changed" and as a result, the SO is not created; however, when I leave the field blank, the message goes through successfully.
    Apparently, a popup saying "Critical credit data changed" shows even when creating SOs manually. My question is this, is there any way I can bypass this message through XI, so that I can create the SO with the ZTERM field populated? Are there any qualifiers I should be looking into?
    Looking forward to your responses!
    Warm regards,
    Glenn

    Hello Anil,
    Thank you very much for your reply! Unfortunately, that configuration is part of the auto credit checking. When I create SOs manually and change the payment terms field, a popup says "Critical credit data changed", I can simply tick the 'check' mark and the SO saves. However, if the SO is sent via XI, the popup causes an error. Is there any information we can provide in the IDOC so that it bypasses those kinds of popup messages?

  • How to find credit data exchange rate at the billing document

    Hi Gurus,
    I have a question about Creidt data exchange rate, I created sales order and when I tried to generate the invoice, it was split into 2 billing document and the reason in split analysis is "Credit data exchange rate at billing document", I want to ask where can I find the credit data exchange rate at the billing document?
    And where can I find that this is one of the criteria to trigger the billing split?
    Thanks for your great help in advance.
    Edited by: Lakshmipathi on May 25, 2011 8:57 PM
    Please dont post the same question in multiple forums which is not allowed

    Hello, this field is for the exchange rate between local currency & local currency 2, there must be someplace to set up it, do you know where is that place?
    As now the invoice split show the data with the exchange rate which is weird. And i don't know how to fix it so that the invoice will not be split anymore..
    Thanks for your great help!

  • Regarding Credit Date in QA32.

    Dear All,
                   I am creating a daily credit  report , for this is am giving input as i.e. selection-options as credit date, my data is comming properly for certain date span but for 1 day date the data is nothig , i.e. : blank.
                   I am fetching inspection lot number , assembly date , serial no , code ,production ord no and much more, but my credit date is wrong, i think so . i am taking date as field-budat table-qals, plz give me correct table name and field name.

    > plz give me correct table name and field name.
    I had the same problem and found this usefull thread. It was like "Wahhaaaaa!"  ---> F1!
    Cool... It is even on the keyboard!! It's like everywhere!!! I'm free... (in development systems...
    Cheers,
    Julius

  • Credit data refresh on delivery document

    Hi
    I've noticed that the credit data (Risk category / Customer credit group etc) on an SD delivery document is copied over from a sales order.
    Is it possible to have the credit data refreshed from the credit master when a delivery document is created?
    This is required in cases when the risk category is changed after an order is created and before a delivery document is created.
    Sequence:
    VA01: Order is created (VBAK-CTLPC = 01 for example)
    FD32: Risk category is changed (from 01 to 02 for example)
    VL01n: Delivery is created (As per current settings, CTLPC on the delivery is 01, it is required that we get 02 instead)
    Kindly suggest any solutions
    Thanks,
    VH

    Dear Vicky,
    I doubt that if it can be achieved through configuration, although with the help of an ABAPer you can write a requirement in copy control to compare the existing Risk Category and if found different overwrite with the one recently maintained.
    Hope solves your problem
    Regards,
    Paresh

  • Lightroom 4-How to reorganize files by date when choosing to add rather than copy them to Lightroom

    My photos were in disorganized folders on different hard drives. I was able to import them into Lightroom 4 using COPY, and now my folders are reorganized by year and month on my hard drive, which is how I want them. However, I now have a copy of my photos in my catalog and a copy of each photo in my photo folder on my hard drive. This is taking up too much space. Is there a way to have Lightroom automatically import my pictures and reorganize them into folders by date using the ADD option rather than the copy option when importing from my hard drive? Thank you!

    You said:
    My photos were in disorganized folders on different hard drives. I was able to import them into Lightroom 4 using COPY, and now my folders are reorganized by year and month on my hard drive, which is how I want them.
    Meaning that they are still where they were, scattered, and not catalogued in LR.  PLUS, there is a copy of each file in the place you copied them to when you imported them, and these are the versions of the files that are catalogued in LR.  Right?
    You said:
    However, I now have a copy of my photos in my catalog and a copy of each photo in my photo folder on my hard drive.
    Yes, one set, the original ones, viewable only in Explorer/Finder, the other/duplicate set viewable in LR (and/or also in Explorer/Finder).
    You said:  This is taking up too much space.
    So just delete the original versions, as long as you are sure that you have them all in the copied-to location (where they are catalogued by LR).
    You said:
    Is there a way to have Lightroom automatically import my pictures and reorganize them into folders by date using the ADD option rather than the copy option when importing from my hard drive?
    As jd_paige says, next time use MOVE instead of COPY.  If you use ADD, they will remain where they are.  Sometimes it is easier to do it this way, and then move/reorganize them once you have them in the catalogue.

  • Shipment is to be blocked if Letter of credit date has expired

    Shipment must be blocked (provision for Delivery order reversal) if Letter of credit Last Date of Shipment is expired:
    Example as follow: - SO 100002703 item 10 - The LC with financial doc 1062 - The last shipping date of Finance.doc 1062 is 30.09.2011 - If user create new Delivery doc at 01.10.2011 ? system should throw error message - If user post Shipment doc at 01.10.2011 ? system should throw error message The validation should be applied for both initial shipment processing or replacement for return.
    Edited by: Lakshmipathi on Nov 7, 2011 12:11 PM
    Thread Locked - Reason Duplicate post

    Hi
    This can be achieved  by using anyone of the user exits V56USVDP and V56UCHCH.
    Regards
    Srinath

  • Tables to see credit data of the customer.

    Hi
    Is ther any table which gives the data for the below mentioned fields
    Customer
    CCA
    Credit limit
    Credit exposure
    credit limit used
    I checked with F.35 but it is giving only the data for customer and CCA.
    thank you,
    Malli.

    Hello,
    Talk to your abaper on how to use the BAPI  'BAPI_CREDIT_ACCOUNT_GET_STATUS'
    This will show you the information you want
    ===
    FU BAPI_CREDIT_ACCOUNT_GET_STATUS
    Short Text
    Determine Credit Status of Credit Account
    Functionality
    This method enables A/R summary data to be determined. A/R summary data contains all the data regarding credit that is required to be able to conduct an operative credit check when entering orders.
    Whether A/R summary data is created (and can then be used) is defined in the accounting system itself.
    If no A/R summary data is created, the data can be gradually determined by calling up the following methods:
    GetOldestOpenItem
    GetHightestDunningLevel
    GetOpenItemsStructure
    GetDetail
    If these methods are used, the A/R summary data represents a summary of the partial results of the above mentioned methods. Although the data from these methods may not be up-to-date, it can be determined much more quickly.
    Parameters
    CUSTOMER
    CREDITCONTROLAREA
    RETURN
    CREDIT_ACCOUNT_OPEN_ITEMS
    CREDIT_ACCOUNT_DETAIL
    Exceptions
    Function Group
    1010

Maybe you are looking for