Reorganization Run

hi.
i want to Delete Material Master(Deletion indicater is already set) from database. how can i do reorganization run??
wats its procedure and Configuration settings.

Hi,
pls check below link
http://www.sap-img.com/bc003.htm
Regards,
Sankaran

Similar Messages

  • Error Scenarios in Database Reorganization

    I need to know what error scenarios may and will occur upon running Database Reorganization. For instance, the db reorg activity was halted in the middle. Some errors like that or something. Kindly provide error scenarios or worst case scenarios or any problematic scenario and kindly indicate the solution as well so that i could have ideas on what to expect and what to encounter during reorganization run.

    Hello Jett,
    what can happen during a reorganization?
    Answer: All or nothing. All things that can occur at normal work can happen at a reorganization.
    You need to think/clarify some things:
    - Which kind of reorg is possible (online / offline) and which restrictions are on some tables
    - How many disk space is needed by the reorg
    - How do you monitor the reorg
    - Look out for oracle bugs that corrupt the data while reorg
    Which scenarios can occur at the reorg depends mostly on the type of rerorg and its objects (online / offline / LOB / LONG , and so on..)
    Regards
    Stefan

  • RMCVNEUF....billing document not updating

    The business recently made a change to the Item Categories that update LIS/SIS. They want us to load all historical documents with this Item Category to our SIS structures and DW. There was a change made to RMCVNEUF to allow for us to search all billing documents where Item Category = NLC, allowing us to use the statistical updating program to load only the historical documents wanted.
    As a test, I found on NLC document and run it thru RMCVNEUF. I have checked the Redetermine Update Group check box. I get a message back saying: Data from billing document 9000878658 was not updated
    Message no. M2210
    Diagnosis
    Data from documents used as a basis is required for the processing of billing documents.
    System Response
    The data in the billing document 9000878658 will not be updated
    System Response
    Ensure that all sales orders and delivery notes are processed before the billing documents.
    NLC item category is now configured in SPRO to be statistically relevant. Why would this not update using RMCVNEUF? Config was changed on 4/16/10 to allow for NLC to update. It seems any document created with this item category prior to that date will not be updated using RMCVNEUF? Any ideas? Not sure of a better/easier way to get only the documents we want to load to SIS and then DW.
    Thank you
    Theresa

    Note 142349 says
    Summary
    Symptom
    If in the statistical setup of the sales information system you select option 'Redetermine update group', the following error messages may occur:M2206, M2207, M2208, M2209, M2210, M2211.
    The documents specified in the messages may be displayed correctly during an update simulation.
    Additional key words
    OLI8, OLI9, RMCVNEUL, RMCVNEUF
    Cause and prerequisites
    During the redetermination of the update group in the reorganization, information from preceding documents is written to the intermediate tables MCVSRFK (document header) and MCVSRFP (document item), which are relevant for the determination of the update group of the subsequent documents.
    Solution
    To fill these intermediate tables, the reorganization of sales orders must be performed before the reorganization of deliveries or the reorganization of sales orders and deliveries must be performed before the reorganization of billing documents (in each case with option 'Redetermine update group'.
    Note
    After the successful reorganization the above-mentioned help tables should be deleted with report RMCVNEDE to avoid uneccessary data collection and the increasing loss in performance during the following reorganization runs.
    thanks
    G. Lakshmipathi

  • Deletion of tax condition records

    Hello,
    In Transaction VK32 (Change Condition Record) I have set the deletion flag on a tax condition record. The field helps says that the condition is deleted during the next reorganization run. Does anyone know what is meant by the "reorganization run" ie. what is the program name.
    Thank you,
    Regards,
    Jackie Jones

    You have to use the archiving programs, (tcode SARA).
    You can delete it only when all sales documents usign this record are archived.
    You can also change the settings in the conditions type (tcode V/05) so that you can phisically delete the condition when saving the deletion but this is not recomended by SAP.
    reward points if helpful
    Regards
    Roberto

  • Regarding Archiving Accounting Documents

    Hi all,
    I am using FBRA for resetting a cleared document.
    But i am getting the error as : Archiving has not finished.
    and the remedy as:  To avoid inconsistencies of this sort, clearing procedure must not be reversed until after archiving has finished.
    Like, I have checked SARA Transaction with Object FI_DOCUMNT.
    Can anyone tell me how to ensure Archiving process is finished for an object?
    Thanks,
    cs

    Dear karin can u help on it
    WE ARE USING SARA TCODE I.E DOCUMNET ARCHIVE ADMINISTRATION FOR FINANCIAL ACCOUTNING DOCUMENTS OBJECT NAME AS FI_DOCUMENT
    AND LATER WE HAVE GIVEN VARIANT AS TEST AND SELECTED AS MAINTAIN BUTTON AND SAY TO YES FOR MESSAGE.AFTER ENTERING INTO
    MAINTAIN VARINT WE HAVE GIVEN COMPANY CODE DOCUMENT NUMBERS AND FISCAL YEAR AND ENTER
    THE FOLLOWING ERROR HAS COME
    ERRO:1 of the 1 company codes selected still have open periods
    Message no. FG257
    Diagnosis
    You have selected a total of 1 company codes. Of those, 1 company codes
    still have open periods, that is, an interval of the fiscal year/periods
    you have selected appears in a period which is displayed in table T001B.
    In table T001B, only entries with a masked account type were evaluated.
    Therefore other company codes may be affected.
    Procedure
    Make sure that you also want to carry out the reorganization run for the
    periods that are still open.
    Edited by: sumathi lakshmi on Feb 3, 2009 7:03 AM

  • Plan cost of IW31 not updating when MRP4 of Material master is individual requirement

    Hi,
    When Individal/coll of MRP4 tab of Raw material is 1 Individual requirement, plan cost is not updating in Tcode IW31 Repair order. It is updating when MRP4 is 2 collective requirement.
    Please let me know the possible reasons.
    Thanks

    Yongguo
    The behavior you are seeing on your system is correct system behavior.                                                                               
    The system rolls costs/revenues up to the assigned wbs element                
    if an order or network activity is flagged for deletion so you                
    can archive orders/networks while the project is still 'alive' without        
    loosing information on costs/revenues.                                        
    The logic is that costs of deleted networks should not get lost but are       
    rolled up to the superior wbs-element.                                                                               
    SAP has the understanding that released activities are used immediately,      
    carry actual costs and, therefore, can not be deleted. To keep the            
    objects clearly arranged the reorganization run can be used to move           
    some objects (those with status DLFL) to the archive without losing           
    data (in the meaning of costs).                                                                               
    If you want to remove these costs of the WBS elements you have                
    to cancel the deletion flag of these networks, remove the planned costs       
    start network costing and save. You can then set the DLFL again and           
    the costs will not appear in the structure report.  
    Hope this helps.
    Best regards
    Martina

  • Can a PO be generated using Info record marked for deletion

    Hello all,
    Is it possible that PO be generated using Info record marked for deletion?
    Observed that a info record is marked for deletion but still able to see a PO generated using this info record.
    Is this becasue - PO can be generated untill info record is actually deleted from the system during next reorganization run?
    What is reorganization run?
    Regds.,
    Chaitanya

    Hello S. Iyer,
    I have following queries -
    1. What is meaning of your statement -
    "If you want to restrict creation of POs against deleted info record"
    Do you mean that info record is "deleted" or "marked for deletion"?
    2. Any way, is there difference between two -  "deleted" or "marked for deletion"?
    3. Where in the info record I can see history of marking for deletion to see who and when marked it for deletion?
    4. Observed that there is a message that comes up that info record is marked for deletion.
    Is there indication on info record itself like - permanent record, tick mark to indicate that it is marked for deletion?
    Regds.,
    Chaitanya

  • Pi industries costing

    hai gurus,
    1) For my new project which follows continuous process of producing beverages on MTS scenario,
    her rectified spirit is produced in one plant as one finished goods. so the production is based on
    the input from plg department,here all the raw material is made available for the production and
    production withdraw materials from stores and produce the spirit and gives back to stores by GR.
    For this scenario how to do costing as there is no order is followed,can we introduce process
    order and do costing .
    2) After production of spirit it is send to bottling plant and where it is mixed with certain ingradients
    and filled in bottles ,packed and again send to stores,here also all the raw materials are made
    available for the production,they receive matl by GI and send the finished goods (cases) to stores
    by  GR,so no order is used , how to bring the system in to order to follow and track the productions
    and do the costing.
    kindly suggest me the sap system to control and monitor entire production process,csoting  etc.
    with regards,
    sekar chand

    Hi,
    Pls. find here some details about Process order costing procedure:
    Process Orders in Cost Object Controlling
    Definition
    Manufacturing order used in the process industries.
    Use
    Process orders are used when materials or services are produced in specific quantities on specific dates. They enable you to plan resources, control how process orders are processed, and specify the rules for account assignment and order settlement.
    Structure
    A process order consists of operations. The operations are performed on primary resources. An operation is divided into phases.
    A phase is an independent processing step that contains a detailed description of one stage of the manufacturing process. Phases are performed on the primary resource of the higher-level operation.
    The way in which the phases are related to each other defines the sequence of the manufacturing process. Phase relationships can be sequential, parallel, or overlapping.
    Multiple materials required for the execution of a specific processing step can be planned for an operation or phase.
    A phase contains standard values for activities. These values serve to calculate dates, capacity requirements, and costs.
    Multiple secondary resources can be planned for operations and phases in addition to the primary resource.
    A phase contains a number of process instructions providing information relevant to process control.
    Integration
    A process order can be based on a master recipe.
    A process order can be created from a planned order.
    When an order is processed, the process instructions of a phase are transferred to the control recipe destination, which requires this information for process control purposes.
    An inspection lot can be created when a process order is released.
    Process Orders in Cost Object Controlling
    Process Order Linked to Product Cost Collector
    If you want to collect costs by product rather than by production order, you can specify in Customizing that you want to collect the costs on a product cost collector rather than on the process order. In this case you use the functions of Product Cost by Period. The process order is not a cost object in this case.
    You define this in Customizing for Product Cost by Period under Product Cost Collectors ® Define Default Values for Order Types or in Customizing for Product Cost by Order under Manufacturing Orders ® Define Default Values for Order Types (PP and CO).
    If you have specified in the order type that you want to collect the costs on a product cost collector, the system creates a link to the product cost collector when you create a process order for the corresponding characteristic combination (such as material / plant / production version). The process order receives the status PCC (product cost collector). This status prevents costs from being assigned to the process order. The production process number is shown in the process order. You can maintain the following fields in the product cost collector:
    Costing variant actual
    Variance key
    Results analysis key
    Profit center
    Business area
    Costing sheet
    Overhead key
    In the process order, these fields are not ready for input. The valuation variant specified in the Costing variant actual of the product cost collector is used to valuate the data confirmed for the process order. The Costing variant planned is not transferred from the product cost collector but is defaulted from the order type of the process order. This costing variant creates a temporary preliminary order cost estimate which cannot be saved.
    No settlement rule is generated for a process order that is linked to a product cost collector.
    The link between the process order and the production process of the product cost collector can only be changed as long as no functions that result in costs have been performed for the process order. If no such functions have been performed, then for example if the production version or the BOM and routing are changed, the process order can be assigned to a different product cost collector. If costs have been incurred, the original assignment is retained even if the production version or the BOM and routing are changed.
    You can view the product cost collector from within the process order.
    If no product cost collector has been created to which the production order can be linked, the system issues a message.
    Process orders that specify a product cost collector are ignored when process orders are processed in the period-end closing activities of Cost Object Controlling.
    Process Order as Cost Object in Product Cost by Order
    In Product Cost by Order, the process order is the cost object.
    As a process manufacturer, you can use process orders and production orders. You can also use production orders in joint production. The use of process orders is recommended, however, because they can handle the special features of process manufacturing.
    You can create a preliminary cost estimate for a process order after releasing it. In sales-order-related production, the preliminary cost estimate of the process order can be used to calculate the standard price if you are using a valuated sales order stock.
    Actual costs for process orders are collected during the production process, such as through goods issues and internal activity allocations.You can view the actual costs and the planned costs for the production order at any time.
    At the end of the period you carry out period closing for the process order, in which you can calculate work in process, for example.
    You can calculate the variances for the process order either cumulatively (lot-based) or by period.
    You can summarize process orders and display the costs in the information system in various ways, such as by plant.
    You can link process orders to collective orders.
    Reorganization of Process Orders
    Process orders that you no longer need can be deleted in a reorganization run.
    Hope this helps.
    Regards,
    Tejas

  • Archiving of BOMu2019s

    Hi,
    I have 22 Materials and now user wants me to archive all the BOM's relates to these 22 materials?
    Please guide me what are the prerequisite needed to be done by me before archiving all the BOMu2019s.
    Note: We had errors in Production system, which we want to reproduce in Quality system.
    Cheers,
    Kumar.S

    Hi,
    There are two ways of deleting BOMs: 
    Using the Delete function. 
    Using the Deletion indicator. 
    If you select the deletion indicator, the BOM is archived in the next reorganization run, and can be deleted if required. In the BOM header, you set the indicator that controls physical deletion after the archiving run. You can still process the BOM within its validity period. This also applies if the deletion indicator is entered with reference to a change number with a valid-from date that is after the date of the next reorganization run 
    You can use the below mentioned tcodes:
    CS25/CS28        Archiving for BOMs
    CS26                  BOM deletion
    CS27                  Retrieval of BOMs

  • Delete and Recreate a Document

    'You have entered the deletion indicator for the document, so the document is to be deleted during the next reorganization run.'
    What should i conclude from this message , when i set the deletion indicator for the document ? I want to delete a document and recreate a new one with same values . I set the indicator , it is set and then when i try to create the a new doc with same name , it gives a message that doc already exists .
    Can there be some archive and delete prog that actually deletes the document ?

    BAPI_DOCUMENT_DELETE_DIRECT : This bapi would delete it from the database also.
    Regards,
    Ravi

  • Delete the Planned Inedependent Requirements (PIR) MD04

    Hi Experts,
    I have a problem like below:
    For a semi finished product in MD04, the Planned order dt 01.10.2007 and PIRs dt 01.10.2007 are not deleted.  As the today's date 23.10.2007, still they exist.
    Where as for the same component in MS04, the planned orders 01.10.2007 and PlRs dt01.10.2007 are deleted.
    What are reasons for not deleted in MD04 and deleted in MS04.
    Pl guide me.
    Best answers will be rewarded.
    Thanks in advance.
    Regards,
    surya.

    Hi
    In MD04 as long as requirements (PIR's)exisit, the planned order will exiist.
    If that planned order is not firmed , in the next MRPrun, it will  be there but with rescheduling message.
    If you want that to be deleted you have torun reorganization run.MD74/MD75.
    For MS04 you have to set up your settings.
    Regards
    YMREDDY

  • How to run a Database Reorganization in Background?

    We are using a Windows Platform and we would like to run database reorganization in Background. How will we do this? Via a command? Can we do it via BRTOOLS? Can we schedule the running of Database reorganization via BRTOOLS? DB13 is out of the question so no need to indicate the solution to run the Database Reorganization in Background via DB13. Kindly advice. Thanks.

    Actually, we do know the various approaches and the Hows on implementing them, we just need the how with regards to running DB reorganization in Background.
    For instance, we will schedule the database reorganization on the evening, since there may come a time when there is nobody available at a certain schedule, we need to schedule it in background so that we could still meet the schedule without anybody, personally, checking on it. Another advantage for it is when there are very large objects that usually took lots of time to finish, we usually let it rest in weekends wherein there is a possibilty that no one is available, we could just schedule it in background without having the problems with regards to timeout in dialog sessions. Also, usually, due to location constraints, we cannot personally access the application server thus, we use remote desktop sessions so as to access the servers. Background session can prevent the risk of having failures with regards to network issues or any other factors that might affect the result of the continuity of the reorganization thus, we need way/s on how to implement it in background session.
    Do anyone have a command in running brtools (specifically for reorganization) to run in background?

  • Hallo My system runs slow. how can i reorganize the date, that the pc runs faster? In the window world i hade to delete some fils. how it work in the apple world?

    Hallo My system runs slow. how can i reorganize the date, that the pc runs faster? In the window world i hade to delete some fils. how it work in the apple world?

    See these:
    Switching from Windows to Mac OS X,
    Basic Tutorials on using a Mac,
    Mac OS X keyboard shortcuts,
    Anatomy of a Mac,
    MacTips,
    Switching to Mac Superguide, and
    Switching to the Mac: The Missing Manual, Mountain Lion Edition.
    Additionally, *Texas Mac Man* recommends:
    Quick Assist,
    Welcome to the Switch To A Mac Guides,
    Take Control E-books, and
    A guide for switching to a Mac.
    Once you get familiar with the Mac, see:
    Mac Maintenance Quick Assist,
    Mac OS X speed FAQ,
    Speeding up Macs,
    How to Speed up Macs, ,
    Macintosh OS X Routine Maintenance,
    Essential Mac Maintenance: Get set up,
    Essential Mac Maintenance: Rev up your routines,
    Maintaining OS X, 
    Five Mac maintenance myths and
    Myths of required versus not required maintenance for Mac OS X for information.

  • Interface Mapping run time error...java.lang.nullpointerException  thrown

    Hi,
    I am trying to create a simple f2f scenairo and when I tested the configuration xi throws this message as :
    Interface Mapping run time error...java.lang.nullpointerException  thrown during application mapping.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <SOAP:Header>
    - <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
      <SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
      <SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>
      <SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
      <SAP:TimeSent>2007-01-09T03:43:49Z</SAP:TimeSent>
    - <SAP:Sender>
      <SAP:Service>CAMEL_BS_01</SAP:Service>
      <SAP:Interface namespace="http://kia.com/fiel2file">Source01_MI</SAP:Interface>
      </SAP:Sender>
    - <SAP:Receiver>
      <SAP:Party agency="" scheme="" />
      <SAP:Service>Camel_BService_01</SAP:Service>
      <SAP:Interface namespace="http://kia.com/fiel2file">Target01_MI</SAP:Interface>
    - <SAP:Mapping notRequired="M">
      <SAP:ObjectId>j5qiPBwVPU2yonkPwhdt/g==</SAP:ObjectId>
      <SAP:SWCV>tR26oJ7nEdu5oM/vCXwv+g==</SAP:SWCV>
      <SAP:SP>-1</SAP:SP>
      </SAP:Mapping>
      </SAP:Receiver>
      <SAP:Interface namespace="http://kia.com/fiel2file">Source01_MI</SAP:Interface>
      </SAP:Main>
    - <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:QualityOfService>ExactlyOnce</SAP:QualityOfService>
      </SAP:ReliableMessaging>
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_Equipment_MM_</SAP:P1>
      <SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
      <SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_Equipment_MM_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    - <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
    - <SAP:Hop timeStamp="2007-01-09T03:43:49Z" wasRead="false">
      <SAP:Engine type="AE">af.pi7.gbdci550</SAP:Engine>
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter>
      <SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
      <SAP:Info />
      </SAP:Hop>
    - <SAP:Hop timeStamp="2007-01-09T03:43:50Z" wasRead="false">
      <SAP:Engine type="IS">is.03.gbdci550</SAP:Engine>
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
      <SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
      <SAP:Info>3.0</SAP:Info>
      </SAP:Hop>
      </SAP:HopList>
    - <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SAP:Date>20070108</SAP:Date>
      <SAP:Time>224350</SAP:Time>
      <SAP:Host>gbdci550</SAP:Host>
      <SAP:SystemId>PI7</SAP:SystemId>
      <SAP:SystemNr>03</SAP:SystemNr>
      <SAP:OS>AIX</SAP:OS>
      <SAP:DB>DB6</SAP:DB>
      <SAP:Language />
      <SAP:ProcStatus>014</SAP:ProcStatus>
      <SAP:AdapterStatus>000</SAP:AdapterStatus>
      <SAP:User>PIAFUSER</SAP:User>
      <SAP:TraceLevel>1</SAP:TraceLevel>
      <SAP:LogSeqNbr>002</SAP:LogSeqNbr>
      <SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
      <SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
      <SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
      <SAP:PipelineElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
      <SAP:PipelineStartElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineStartElementId>
      <SAP:PipelineService>PLSRV_MAPPING_REQUEST</SAP:PipelineService>
      <SAP:QIdInternal>XBTOW0__0001</SAP:QIdInternal>
      <SAP:CommitActor>X</SAP:CommitActor>
      <SAP:SplitNumber>0</SAP:SplitNumber>
      <SAP:NumberOfRetries>0</SAP:NumberOfRetries>
      <SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
      <SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
      <SAP:PlsrvExceptionCode />
      <SAP:EOReferenceRuntime type="TID">097C2FFA403445A30F7600CE</SAP:EOReferenceRuntime>
      <SAP:EOReferenceInbound type="TID" />
      <SAP:EOReferenceOutbound type="TID" />
      <SAP:MessageSizePayload>168</SAP:MessageSizePayload>
      <SAP:MessageSizeTotal>2608</SAP:MessageSizeTotal>
      <SAP:PayloadSizeRequest>168</SAP:PayloadSizeRequest>
      <SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
      <SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
      <SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
      <SAP:Reorganization>INI</SAP:Reorganization>
      <SAP:AdapterInbound>AENGINE</SAP:AdapterInbound>
      <SAP:InterfaceAction>DEL</SAP:InterfaceAction>
      <SAP:RandomNumber>67</SAP:RandomNumber>
      <SAP:AckStatus>000</SAP:AckStatus>
      <SAP:SkipReceiverDetermination />
      <SAP:Sender_Agreement_GUID>49574D50A74F3F5D902E20831759594C</SAP:Sender_Agreement_GUID>
      <SAP:Serialize_Children>X</SAP:Serialize_Children>
      </SAP:RunTime>
    - <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <SAP:RunTimeItem>
      <SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.025474</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
      <SAP:Timestamp type="end" host="gbdci550">20070109034350.064329</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.067038</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="end" host="gbdci550">20070109034350.085552</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.085573</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
      <SAP:Timestamp type="end" host="gbdci550">20070109034350.472198</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.473649</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="gbdci550">20070109034350.483159</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.483341</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="gbdci550">20070109034350.48668</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.486921</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="end" host="gbdci550">20070109034350.49182</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.491835</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
      <SAP:Timestamp type="end" host="gbdci550">20070109034350.720028</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.721545</SAP:Timestamp>
      </SAP:RunTimeItem>
      </SAP:PerformanceHeader>
    - <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:TraceLevel>Information</SAP:TraceLevel>
      <SAP:Logging>Off</SAP:Logging>
      </SAP:Diagnostic>
    - <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <Trace level="1" type="T">Party normalization: sender</Trace>
      <Trace level="1" type="T">Sender scheme external = XIParty</Trace>
      <Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
      <Trace level="1" type="T">Sender party external =</Trace>
      <Trace level="1" type="T">Sender party normalized =</Trace>
      <Trace level="1" type="T">Party normalization: receiver</Trace>
      <Trace level="1" type="T">Receiver scheme external =</Trace>
      <Trace level="1" type="T">Receiver agency external =</Trace>
      <Trace level="1" type="T">Receiver party external =</Trace>
      <Trace level="1" type="T">Receiver party normalized =</Trace>
      <Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
      <Trace level="1" type="T">COMMIT is done by XMB !</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
      <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">XMB entry processing</Trace>
      <Trace level="1" type="T">system-ID = PI7</Trace>
      <Trace level="1" type="T">client = 200</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = PIAFUSER</Trace>
      <Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Message-GUID = 9E0AD3009F9311DB8770000D60514DD2</Trace>
      <Trace level="1" type="T">PLNAME = CENTRAL</Trace>
      <Trace level="1" type="T">QOS = EO</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
      <Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
      <Trace level="1" type="T">Queue name : XBTI0008</Trace>
      <Trace level="1" type="T">Generated prefixed queue name = XBTI0008</Trace>
      <Trace level="1" type="T">Schedule message in qRFC environment</Trace>
      <Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Going to persist message</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
      <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
      <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
      <Trace level="1" type="T">system-ID = PI7</Trace>
      <Trace level="1" type="T">client = 200</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = PIAFUSER</Trace>
      <Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
      <Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
    - <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
      <Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      </Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
    - <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
      <Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      </Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
      <Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
    - <!--  ************************************
      -->
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">number of receivers: 1</Trace>
      <Trace level="1" type="T">Single-receiver split case</Trace>
      <Trace level="1" type="T">Post-split internal queue name = XBTOW0__0001</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Persisting single message for post-split handling</Trace>
      <Trace level="1" type="T" />
      <Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
      <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
      <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
      <Trace level="1" type="T">system-ID = PI7</Trace>
      <Trace level="1" type="T">client = 200</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = PIAFUSER</Trace>
      <Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
      <Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
      <Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
      <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Interface Mapping http://kia.com/fiel2file Equipment_IM_Outbound</Trace>
      <Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_Equipment_MM_</Trace>
      <Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:403) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:398) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))</Trace>
      <Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_Equipment_MM_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd</Trace>
      <Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_Equipment_MM_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:73) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:403) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:398) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))</Trace>
      <Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
      <Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      </SAP:Trace>
      </SOAP:Header>
    - <SOAP:Body>
    - <SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7">
    - <SAP:Payload xlink:href="cid:[email protected]">
      <SAP:Name>MainDocument</SAP:Name>
      <SAP:Description />
      <SAP:Type>Application</SAP:Type>
      </SAP:Payload>
      </SAP:Manifest>
      </SOAP:Body>
      </SOAP:Envelope>
    Please I request to give me some hint how to troubleshoot this issue.
    Thanks a lot,
    Srujan

    Hi, i have the same type of error when testing configuration, but it seems that the mapping even doesn't start :
    i'm creating an EBP to XCBL scenario, so it's a RFC->XI->XCBL 3.5
    Here is the Java exception
    Mappage d'interface
    Can someone be helpful for that ?
    Regards
    Laurent
    Message was edited by:
            Laurent Gitton

  • Reorganization of Credit data :

    Dear SAP Experts ,
    We have changed the Risk categories of some of the CUstomers . Now I have run the reorganization of the Credit Data.
    We have the following Message the NEw Credit Limit was created.
    Where can I view that what was changed and of which CUstomers.
    regards,
    A S

    Dear Gurunadh Kollipara,
    I have recreated the FI and SD data for the reorganization.
    Now in the FCV3 Report I can see there is double entry in the of all the Customers.
    The Payer Column there is one entry X and the other is Blank for each Customer.
    *The following is the help documents of the P( Payer:)
    FI checks only against current payer
    Indicates that credit checks against open items, oldest open item, and the highest dunning level are carried out using the open items and the dunning level of only the current payer (and not with data from all payers who are assigned to the credit customer).
    Note
    This is only the case if the payer is copied into the document on the basis of the partner determination procedure.*
    Why there is dual entry the report for all Customers.
    Please explain.
    Edited by: SAP Consultant on Dec 9, 2008 12:02 PM
    Edited by: SAP Consultant on Dec 9, 2008 12:23 PM

Maybe you are looking for