Reorganizing the icons doesn't work

Well I bit the bullet and downloaded the update. Everything works fine except the customisation.
It just doesn't do it. No matter how long I keep the home button pressed it just doesn't do anything.
Any ideas?

It's not the home button, it's any icon.

Similar Messages

  • Since upgrade, I can't now tell the size of attachments added to email and the attachment link from the icon doesn't work properly. How can these be addressed?

    Since the upgrade to mozilla and to windows was installed on my computer, when I use my hotmail account with mozilla, I now cannot tell the size of attachments. Previously you could see the size of attachments but now when the cursor passes over the attachment, this works on Internet explorer but not Mozilla. Also, the icon for attachments often doesn't work, nor the "send as an online document" nor the "No thanks" icon.

    The "Use custom settings for history" selection allows to see the current history and cookie settings, but selecting this doesn't make any changes to history and cookie settings.
    Firefox shows "Use custom settings for history" as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.
    If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History".
    "Never Remember History" means that Private Browsing is active and "Always use private browsing mode" gets a checkmark.
    You need to remove the checkmark on "Always use private browsing mode" to leave Private Browsing mode or chose the "Remember History" setting.
    *https://support.mozilla.org/kb/Private+Browsing

  • Installed but icon doesn't work

    When I click on the smart web printing icon it tells me I have to update.  A message comes back that version 6.4 is already installed.  But the Icon doesn't work and takes me back to installing again. 
    Photosmart c410
    Windows Vista
    Dell

    Not haapen for me !!!

  • Hi there, i have a ipod nano general 7, just used one year. Now can't charge battery. When charging, the icon shows full power, but disconnect it. It becomes dark, no power. Why, the battery doesn't work ?

    I've a ipod nano general 7, I've just used it one year. Now, I can't charge the battery. When charging, the icon shows full power. But when I disconnect, the ipod becomes dark, no power is keeped. Why, the battery doesn't work ? the life of my ipod's battery is too short ? 

    Howdy tamsg,
    Welcome to Apple Support Communities.
    The article linked below provides a lot of great troubleshooting tips that can help you resolve the issue with your iPod nano charging or displaying a blank black screen.
    iPod nano (7th generation): Hardware troubleshooting - Apple Support
    So long,
    -Jason

  • The bottom bar on my mail has disappeared which means I can't create, reply or forward to an email. Any ideas how to get it back? Touching the screen at the bottom doesn't work!

    The bottom bar in my email seems to have disappeared which means I can't create, reply or forward any emails. Any auggestions to how to get it back? Touching the bottom of the screen doesn't work. Thanks.

    Close all apps in the Multitasking Drawer; Double Tap Home Button to open drawer, Swipe up on each app to close it. Repeat until all apps are closed, touch home screen.
    Restart phone, hold both Home and Power/Sleep buttons down at the same time, continue to hold them down until the Apple Logo appears, Release both buttons and wait for phone to restart.
    Check email app to see if bottom bar and new email icon have come back.
    If not, delete the email account in settings and then add it back in again.
    If mail still not working as it should, you may try doing a Reset All Settings reset in Settings => General => Reset => Reset All Settings.  You won't lose any data, music, apps, videos,pictures, etc.  But you will have to go back in and turn on or off any settings you changed on your phone because everything will be set back to factory defaults.

  • I'm having problems with facebook notifications.  The sound doesn't work but shows up in banner.  Any suggestions?  I've tried everything but restoring.  Is it a phone problem or an app problem?

    I am having a problem with facebook notifications.  The sound doesn't work but appears as a banner.  I've tried everything but restoring the phone.  Is this a phone problem or an app problem?  Has anybody experienced this problem and were they able to correct it? 

    1) This is because of software version 1.1. See this
    thread for some options as to how to go back to 1.0,
    which will correct the problem...
    http://discussions.apple.com/thread.jspa?threadID=3754
    59&tstart=0
    2) This tends to happen after videos. Give the iPod a
    minute or two to readjust. It should now be more
    accurate.
    3) This?
    iPod shows a folder icon with exclamation
    point
    4) Restore the iPod
    5) Try these...
    iPod Only Shows An Apple Logo and Will Not Start
    Up
    iPod Only Shows An Apple Logo
    I think 3,4, and 5 are related. Try the options I
    posted for each one.
    btabz
    I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

  • I just upgraded the software on my iphone 4s and now the touchscreen doesn't work and i have the itunes logo an arrow and a plug on my screen

    I just upgraded the software on my iPhone 4s. Now the touchscreen doesn't work and on the screen is the itunes logo, an arrow and a plug. I have powered it off and on and nothing changes

    The iTunes icon and cable means that it's gone into recovery mode - you will need to connect the phone to your computer's iTunes and you should be able to use that to reset the phone, and you can then restore/resync your content to it

  • Four main icons doesn't work

    I NEED HELP ASAP
    I HAVE A 3G IPHONE, AND THE 4 ICONS DOESN'T WORK, I WANT TO KNOW IF I NEED CHANGE THE SCREEN OR IS ONLY A SOFTWARE PROBLEM
    PLEASE GIVE ME YOUR COMENTS

    have you taken the troubleshooting steps recommended in the User Guide?

  • When I answer my phone calls the sensor doesn't work, so it keeps going to speaker or mute. How do it ensure my sensor works

    When I answer my phone calls the sensor doesn't work, so it keeps going to speaker or mute. How do it ensure my sensor works

    Remove all apps from multitasking bar. Double click Home button then tap and hold an icon and tap on little x on every app. Then reset. Hold down Home and Power button until Apple logo appears.

  • My ipod touch 3G the bottom doesn't work. How do i fix it?

    Everything on the top works. From the bottom, its slowly moving up. now i'm not able to slide to unlock it.

    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • HT1657 I rented a movie and the sound doesn't work, how do I fix it?, who do I direct to for a complaint?

    Hi, I rented warhorse HD, and the sound doesn't work, my itunes version is 10.6.1(7). How do I fix it or who do I direct to get my money back? Thank you

    I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
    (Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

  • My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time?

    My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time - then I have to repeat this again! Any help appreciated.

    I've been having the same issue, but have just discovered something on my own that hasn't been pointed out in any of the forums I've visited.  In what I thought would be a vain attempt to help myself, I went to System Preferences, Users & Groups, and then clicked on Login Items.  I discovered that one of the Items that was listed to open automatically upon login was iTunes Helper and that there was an exclamation point beside it indicating that it was incompatible.  I simply deleted that item and now I don't have the situation you described and my wireless is connected.  Hope this helps!

  • Does anyone else have two Apple IDs? I can't get rid of one of them. It's associated with my iCloud account and I can't fix it. The password doesn't work.

    So, apparently I have two Apple IDs associated with my iPhone. One is an old aol address that got hacked and was shut down. Even aol doesn't recognize the email address anymore, and the password doesn't work. It's associated with my iCloud account, so now I can't access that account. My other Apple ID is with everything associated with my iPhone and everything works just fine. But now I can't get to my iCloud stuff. Has this ever happened to anyone else. The guy at the Apple store says he's never heard of it.

    Does the alert refer to "Local Items?"

  • I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymor

    I have purchased the Adobe Creative Suite 4 and now my first dvd of the software doesn't work anymore. My computer doesn't want to read it anymore. I want to mention that I also tried on some other computers and still the problems continues. How can I solve this? On the Adobe webpage I can't find anymore the download for Adobe CS4. Thanks. Marius Lupu

    You can download the software from http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html and can serialize it with the serial number you have.
    NOTE:- READ THE INSTRUCTION PROPERLY TO AVOID ANY ERROR.

  • Count(*) in the loop doesn't work and I really don't know why...

    Hello,
    I can't figure out why the following doesn't work. I cannot debug for I do not have privileges on this server.
    The execution always fails on bolded line. If I substitute the variable with the table name itself it works. The variable is properly populated in each of the iterations as I can see it by using dbms_output package. The small but may be important detail may be I am connected as user A but the tables are in the schema B. However I can list the tables and their columns in all_tab_cols view and there are synonyms made in my schema which allow me to access the B tables without prefixing them.
    I get the error:
    Error report:
    ORA-00900: invalid SQL statement
    ORA-06512: at line 26
    00900. 00000 - "invalid SQL statement"
    *Cause:   
    *Action:
    I ran out of ideas and I do not have access to any of the Oracle instance to be able to debug right now.
    Variable type for v_tables is wrong? I do not have some magic privilege to use execute immediate with variable?
    Oracle server has a bad day today?
    The crap is 11.1.0.7 if it has anything to do with my problem.
    Please help if you can.
    Grzegorz
    declare
    v_number number := 646989;
    v_current_table nvarchar2(50);
    v_itemno number;
    type t is table of nvarchar2(50);
    v_tables t;
    begin
    dbms_output.put_line('Working...');
    select table_name bulk collect into v_tables from all_tab_cols where column_name = 'ITEMNO' order by table_name;
    for i in 1 .. v_tables.count loop
    dbms_output.put_line('Number: ' || i);
    v_current_table := v_tables(i);
    <b>execute immediate 'select count(*) from ' || v_current_table || ' where itemno = :a' into v_itemno using v_number;</b>
    if (v_itemno > 0) then
    dbms_output.put_line('Current table contains specific ITEMNO: ' || v_current_table);
    end if;
    end loop;
    end;

    In SQL Plus run this and see what SQL is your code returning. Then execute the SQL individually.
    set serveroutput on
    declare
         v_number number := 646989;
         v_current_table nvarchar2(50);
         v_itemno number;
         type t is table of nvarchar2(50);
         v_tables t;
         lSqlString varchar2(20000);
    begin
         select table_name
           bulk collect into v_tables
           from all_tab_cols
          where column_name = 'ITEMNO'
          order by table_name;
         for i in 1 .. v_tables.count loop
              v_current_table := v_tables(i);
              lSqlString := 'select count(*) from ' || v_current_table || ' where itemno = :a';
              dbms_output.put_line(lSqlString);
              --execute immediate  lSqlString into v_itemno using v_number;
         end loop;
    end;

Maybe you are looking for