REP-0124 error - Unable to write to temp

Report Builder version : 6.0
Can you explain how to overcome the 2GB temp file limitation in Oracle Reports?
Verified all the temp space and other parameters. All are set properly.
But still report doesnt run and throwing the error REP-0124. Unable to write in the temp.
Also shows this error, REP-0081sometimes. The problem is due to huge data.
Thanks in advance
Mouly

Hi ,
Thanks a lot for your reply.I will agree with your point if i face the issue on all the passive database copies residing on the DR site .But here i am facing this issue only on the DB copies that have the large no of mailboxes and the other passive databases
are not facing the mentioned issue.
At Same time please read all the comments in the below mentioned blog which says that the mentioned issue is an BUG in exchange 2013 CU4 and it was resolved in CU5 .Then my second suspection would be on the network side .If i wanted to pin point that
the issue is residing on network side then i need to ensure it is not an BUG in exchange 2013 CU4.
Reference
Link :
http://www.experts-exchange.com/Software/Server_Software/Email_Servers/Exchange/Q_28423594.html
Thanks & Regards S.Nithyanandham

Similar Messages

Error, can't write to temp

Hello,
On a Mac with Creative Cloud, when I try to install any application I get this error message :
Installation failed
Error, can't write to temp..

Iozo the next step would be to try a new local administrator account to see if you face the same difficulties. Are you receiving any other strange behavior under your current User account? I would think you would be seeing errors much more often if you were unable to write to the temporary directory.
Another option is that you may want to look at the security software you are using. Perhaps it is attempting to prevent our installers from writing to the temporary directory. This could explain while your file permissions are correct but you still receive the same error.

HELP: flarcreate fails with ERROR: unable to write archive

Greetings,
Having trouble trying to create flar file.
I am using the following syntax, but the -X seems to be ignored and I can't find what the format for that file should be.
appdev03 # flarcreate -n appdev03 -S -H -a "author" -X /tmp/exclude /tools/appdev03.flar
Full Flash
Checking integrity...
Integrity OK.
WARNING: fdo: Ignoring duplicate filter entry. Choosen entry will be: /opt/orca/var -
WARNING: fdo: Ignoring duplicate filter entry. Choosen entry will be: /opt/orca/var -
Running precreation scripts...
Precreation scripts done.
Creating the archive...
cpio: "var/tmp/21502_00000001" ?
cpio: "var/tmp/28914_00000001" ?
cpio: "var/tmp/28939_00000001" ?
cpio: "var/tmp/26624_00000001" ?
cpio: "var/tmp/26627_00000001" ?
cpio: "var/tmp/04733_00000001" ?
cpio: "var/tmp/29298_00000001" ?
cpio: "var/tmp/13627_00000001" ?
cpio: "var/tmp/13628_00000001" ?
cpio: "var/tmp/02531_00000001" ?
cpio: "var/tmp/02532_00000001" ?
cpio: "var/tmp/04735_00000001" ?
cpio: "var/tmp/xsauthn" ?
cpio: "var/tmp/27491_00000001" ?
cpio: "var/tmp/08868_00000001" ?
cpio: "var/tmp/08869_00000001" ?
cpio: "var/tmp/20269_00000001" ?
cpio: "var/tmp/20270_00000001" ?
cpio: "var/tmp/27492_00000001" ?
cpio: "var/tmp/xsauthz" ?
cpio: "var/tmp/16103_00000001" ?
cpio: "var/tmp/16104_00000001" ?
cpio: "var/tmp/29964_00000001" ?
cpio: "var/tmp/03913_00000001" ?
cpio: "var/tmp/09305_00000001" ?
cpio: "var/tmp/10454_00000001" ?
cpio: "var/tmp/10505_00000001" ?
cpio: "var/tmp/07839_00000001" ?
cpio: "var/tmp/08129_00000001" ?
cpio: "var/tmp/00574_00000001" ?
cpio: "var/tmp/00694_00000001" ?
cpio: "var/tmp/05611_00000001" ?
cpio: "var/tmp/05612_00000001" ?
cpio: "var/tmp/01281_00000001" ?
cpio: "var/tmp/06672_00000001" ?
cpio: "var/tmp/06674_00000001" ?
cpio: "var/tmp/14242_00000001" ?
cpio: "var/tmp/14243_00000001" ?
cpio: "var/tmp/13904_00000001" ?
cpio: "var/tmp/13924_00000001" ?
cpio: "var/tmp/25133_00000001" ?
cpio: "var/tmp/25159_00000001" ?
cpio: "var/tmp/27648_00000001" ?
cpio: "var/tmp/27649_00000001" ?
cpio: "var/tmp/29284_00000001" ?
cpio: "var/tmp/29287_00000001" ?
cpio: "var/tmp/12637_00000001" ?
cpio: "var/tmp/12640_00000001" ?
cpio: "var/tmp/13947_00000001" ?
cpio: "var/tmp/03944_00000001" ?
cpio: "var/tmp/03945_00000001" ?
cpio: "var/tmp/13950_00000001" ?
cpio: Error with fstatat() of "opt/appworx/log/RmiServer1106141450.log", errno 2, No such file or directory
cpio: Error with fstatat() of "opt/appworx/log/RmiServer1106141440.log", errno 2, No such file or directory
22708784 blocks
54 error(s)
Unable to write archive file.
ERROR: Unable to write archive.
my -X file /tmp/exclude is as follows, yet it seems ignored:
appdev03 # more /tmp/exclude
/var/tmp/.oracle
/var/tmp/[0-9*]
/var/tmp/xsauthz
/var/crash
/tlg
/tacp
/depot
/tools
/toolsdb
/development
/opt/orca/var
/usr/local/CAcrypto/cacrypto_solaris.tar
/usr/local/CAcrypto/cacrypto_sun4_solaris.tar
/usr/local/CAcrypto/cacrypto.tar
/var/opt/oracle/jre/jre.tar
/var/opt/oracle/oraInventory.09252003.tar
/var/opt/oracle/oraInventory.10212003.tar
/var/opt/oracle/oraInventory.11032003.tar
/var/opt/oracle/jre.tar
/opt/ca/harvest/harvest.tar
/opt/ca/harvest/tomcat55/apache-tomcat-5.5.20.tar
/opt/ca/harvest/tomcat55/apache-tomcat-5.5.20-compat.tar
/opt/ca/caiptodbc/odbc511.tar
/opt/appworx/UWClient/web/images.tar
/opt/appworx/jre.tar
/opt/appworx/apache.tar
/opt/appworx/apache_dev.tar
/opt/appworx61/jre.tar
/opt/appworx61/apache.tar
/opt/appworx61/AWjars.tar
/opt/appworx61/AWutil.tar
/opt/appworx61/install/v61/apache.tar
/opt/appworx61/install/v61/awjars.tar
/opt/appworx61/install/v61/awutil.tar
/opt/appworx61/install/v61/jre.tar
/opt/appworx/log/RmiServer1106141450.log
/opt/appworx/log/RmiServer1106141440.log
/emc/2312fcode_2_00_6.tar
the file is there but not sure of its accuracy:
appdev03 # flar -i appdev03
files_archived_method=cpio
creation_date=20110621221025
creation_master=appdev03
content_name=appdev03
creation_node=appdev03
creation_hardware_class=sun4u
creation_platform=SUNW,Netra-T12
creation_processor=sparc
creation_release=5.9
creation_os_name=SunOS
creation_os_version=Generic_118558-39
files_compressed_method=none
content_author=author
content_architectures=sun4u
type=FULL
system is Solaris 9 04/03 with Generic_118558-39 V1280.
plenty of space in the directory being written to and I can touch a file there as well.
Any advise is appreciated, thanks.
Jeff
Edited by: user13021352 on Jun 21, 2011 3:40 PM

What report is it ?
Did you try and search metalink ?
How to handle 'ORA-01652: unable to extend the temp segment by 128 in tablespace' error messages? (Doc ID 1359238.1)
R12 Journal Entries Report (XLAJELINESRPT) Has Performance Issue Or Fails With Error: "java.sql.SQLException: ORA-01652: unable to extend temp segment by 128 in tablespace TEMP1" (Doc ID 1141673.1)
This forum may be the right one for your question - General EBS Discussion

Fatal Error: Unable to write to the transaction log

I encounter the following error messsage when i run my jsp:
Fatal Error: Unable to write to the transaction log (/D:/jdev9i_902/jdev/system/oc4j-config/log/transaction.state), possible reasons for this are that Orion lacks permission to write to the file, or that another instance of the server is already running with this configuration (most common): Unable to alter transaction log
P.S. I have checked the 'Run Manager', no active process has been running. Does anyone know how to solve it?

Believe it or not!? I solve it by restarting my computer ... XD. At the mean time, i open a MS-DOS window to monitor my netstat ...

WebUtil dll download error: Unable to write to local file

Hi,
Hopefully I'm putting this in the correct forums.
I'm setting up a Forms application that uses webutils.
We're running Forms and Reports standalone (10.1.2.3.0) running on Solaris Sparc (64bit) and have just applied patch 7703734.
As per Oracle Support doc [ID 783937.1], I'm trying to set the download location for the webutil libraries:
install.syslib.location.client.0 = C:\webutil
However, I'm gettting the following error message in the Java 6u16 console (repeated for each of the 3 webutil files)
*2011-Feb-07 12:24:16.988 ERROR>WUC-19 [URLDownload.pullFile()] Unable to write to local file C:\webutil\::dev\d2kwut60.dll. Failed to download URL http://appdev02:7787/forms/webutil/d2kwut60.dll*
I've done a bit of searching and most of the answer's I've come across refer to Vista or Windows 7 and UAC. Unfortunately the SOE for this app is XP Pro SP3.
It's probably something simple I'm missing , but would appreciate and pointing in the right direction.
If you need any more info, let me know.
Cheers,
Matt

Hello
the problem also appears with windows vista
i found a solution but it's not a good one
if you download the files into the java directory
you can modify the userrights and give the user "everyone" the right 'write' for the bin directory.

Disk Utility Error "Unable to write to the last block of the device"

I have a WD Caviar Black 1TB drive in an OWC Mercury Elite-AL Pro Quad Interface enclosure. I have been using it as a Time Machine back up volume without any trouble. I recently upgraded to Lion and within a week I had a back up fail. I tried repairing the disk, and then tried erasing it, but that failed as well with the error saying that it was "Unable to write to the last block of the device". This would seem to be the drive failing, but there are many reports in the Apple forums of back up drives giving this error after a Lion upgrade and I am thinking it's some kind of issue with drive needing some kind of firmware update or special formatting. I thought you guys might be familiar with the issue and have a fix. Right now the disk is dead in the water and can't be reformatted.

I have exactly the same set up I described above in two different locations (one at home, and one at work). I swap the Time Machine BUP drive when I get to each location and therefore leave my most recent back up at home or work when I leave each place. That worked fine for a couple of years. Then after the Lion upgrade, I started having issues with the two drives. In both cases, I had to lose all my BUP history in Time Machine and start over with a fresh back up. The set up at home, let me do it by reformatting the drive and then doing a new back up (I was frustrated I lost all the incremental back ups, the whole point to "Time" Machine, but I was able to get a new BUP established and start over). At work, however, I had the issue described in my original post where I couldn't reofrmat the drive. I was at a standstill and that's why I posted my issue. A couple of weeks later, I got to work, plugged in the drive and it let me reformat it like nothing there was never a problem. I made a fresh Time Machine BUP and everything was back to normal (albeit with a new BUP). I can't tell you what changed ... It's possible there was a software update that snuck in and updated drivers or something without me being aware of it, but I haven't got a clue. All I know is it's resolved and I am back to backing up as before ... Most importantly is to note it was not the drive that failed. So, there's the update for you, I wish you luck with your drive.

Error: Unable to write the email to the mailbox. Make sure the file system allows you write privileges, and you have enough disk space to copy the mailbox.

when trying to download new messages into Thunderbird, I keep getting the error message:
Unable to write the email to the mailbox. Make sure the file system allows you write privileges, and you have enough disk space to copy the mailbox.
what does this mean and how do I correct it???
thanks

I have this problem too, but my Inbox is empty. There are 125 emails waiting on the server, including one i just sent from another address.
The site you recommended is "having difficulties".
May 4
I have now accessed the KB article above. None of the recommended actions made a difference. I deleted about half the 130 emails awaiting download from web-mail, but still got the same error. I can't clean out the inbox because I can't download emails yo it :-( I have 3 other addresses operating under the same server satisfactorily.

External USB hard drive won't reformat, won't appear in Finder, error: Unable to write to the last block of the device message

So I just got a new MacBook Air and since I had an external USB hard drive (TOSHIBA MQ01ABD100 1TB) lying around, I decided to use it for back-up. Since I only have just the one hard drive, I decided to partition it into two - one for Time Machine backups, and one for general files (formatted FAT so I could use it with Windows). However, the partitioning failed and I ended up with a partition named disk1s2. Plus, it won't appear on Finder anymore, but it appears in Disk Utility.
I have tried to reformat it, but I always get the message "Unable to write to the last block of the device".
Here's the info about my drive:
Name: TOSHIBA MQ01ABD100 Media
Type: Disk
Partition Map Scheme: GUID Partition Table
Disk Identifier: disk1
Media Name: TOSHIBA MQ01ABD100 Media
Media Type: Generic
Connection Bus: USB
USB Serial Number: 1220069C
Device Tree: IODeviceTree:/PCI0@0/XHC@14
Writable: Yes
Ejectable: Yes
Location: External
Total Capacity: 1 TB
Disk Number: 1
Partition Number: 0
S.M.A.R.T. Status: Not Supported
And here's for disk1s2:
Name: disk1s2
Type: Partition
Disk Identifier: disk1s2
Mount Point: Not mounted
File System: Mac OS Extended
Connection Bus: USB
Device Tree: IODeviceTree:/PCI0@0/XHC@14
Writable: Yes
Capacity: 999.86 GB
Owners Enabled: No
Can Turn Owners Off: Yes
Can Be Formatted: Yes
Bootable: Yes
Supports Journaling: Yes
Journaled: No
Disk Number: 1
Partition Number: 2
Here's what it says when I run diskutil in Terminal:
Device Identifier:        disk1
Device Node:              /dev/disk1
Part of Whole:            disk1
Device / Media Name:      TOSHIBA MQ01ABD100 Media
Volume Name:              Not applicable (no file system)
Mounted:                  Not applicable (no file system)
File System:              None
Content (IOContent):      GUID_partition_scheme
OS Can Be Installed:      No
Media Type:               Generic
Protocol:                 USB
SMART Status:             Not Supported
Total Size:               1.0 TB (1000204884480 Bytes) (exactly 1953525165 512-Byte-Units)
Volume Free Space:        Not applicable (no file system)
Device Block Size:        512 Bytes
Read-Only Media:          No
Read-Only Volume:         Not applicable (no file system)
Ejectable:                Yes
Whole:                    Yes
Internal:                 No
OS 9 Drivers:             No
Low Level Format:         Not supported
I didn't have any data in it prior to the failed partitioning attempt, so there aren't any worries of data recovery. But I'd really like to be able to use this drive again, and save some money (external hard drives are expensive where I live). Anyone with any ideas?

I'd also like to add that repairing the disk using Disk Utility does nothing but tell me to reformat the drive. So I'm stuck in a loop here.

Broken Pipe Error-unable to write to socket for second attempt

Hello,
I am opening socket connection wuth C-server program.
I am able to write and read from socket for first time but when tried to write second time in the same sequence gives broken pipe error.
As seen in the code initialize() methods works perfectly fine,
Pipe broken error is encountered for processRequest() method for writeBytes(begnmsg+"\n") method.
Please suggest solution asap.
Following is the code
import java.io.*;
import java.net.*;
public class PowerModelClient {
     Socket kkSocket = null;
BufferedReader in = null;
     PrintWriter out = null;
     DataOutputStream os = null;
          char m_eomChar = '\n';
public PowerModelClient(){
try{
//Opens socket connection with C-server program,
openConnection();
System.out.println("connected to server");
//Sends data base information to C-server program and receives acknowledgement from it.
String recv = initialize();
System.out.println("Initialize successful"+recv);
     try{
// Sleep for a short period of time
     Thread.sleep ( 10000 );
catch (InterruptedException ie) {}
     System.out.println("Initialize successfu 22l");
//Sends data base information to C-server program and receives acknowledgement from it.
processRequest();
//Closes socket connection
     closeConnection();
     System.out.println("Comesout to do QUIT ");
catch(Exception e){
     System.out.println("Error in main::"+e.toString());
     public static void main(String[] args) throws IOException {
                         new PowerModelClient();
Opens socket connection with C-server program,
public void openConnection() throws IOException{
try {
                    kkSocket = new Socket("server",port);               os = new DataOutputStream(kkSocket.getOutputStream());
     //out = new PrintWriter(kkSocket.getOutputStream(),true);
in = new BufferedReader(((java.io.Reader)(new InputStreamReader(kkSocket.getInputStream()))));
     } catch (UnknownHostException e) {
          System.err.println("Don't know about host: server.");
                    System.exit(1);
               } catch (IOException e) {
                    System.out.println("Couldn't get I/O for the connection to: server."+e.getMessage());
                    System.exit(1);
     Sends data base information to C-server program and receives acknowledgement from it.
     This makes the C program to connect with Database.
     The data send to socket should be tagged between @BEGMSG@\nand @ENDMSG@\n
     Similary data obtained from socket will be tagged between @BEGMSG@\n and @ENDMSG@\n
public String initialize() throws IOException{
               int ibyteread = 0;
          String fromServer = "";
          String beginmsg=padString("@BEGMSG@");
          String endmsg = padString("@ENDMSG@");
          String recv = "";
          if (kkSocket != null ) {
try {
                    // Set the socket timeout for ten seconds
               //     kkSocket.setSoTimeout(10000);
                                   //String data = padString("INIT\tabcd\tisderssddsdg\tdrtrs1\twetewte");                              os.writeBytes(beginmsg+m_eomChar);
               in.read();
          os.flush();
          os.writeBytes(data+m_eomChar);
          in.read();
     os.flush();
     os.writeBytes(endmsg+m_eomChar);
     os.flush();
     recv = readResponse(in);
} catch (UnknownHostException e) {
System.err.println("Trying to connect to unknown host: " + e);
                                             // Exception thrown when network timeout occurs
                         catch (InterruptedIOException iioe)
                         System.err.println ("Remote host timed out during read operation");
                         catch (IOException e) {
                         System.err.println("IOException: " + e);
                         catch (Exception e) {
               System.err.println("Exception: " + e);
          return recv;
Sends data after database connection is established to socket for entitlement processing
and will receive acknowledgement from server.
public void processRequest() throws IOException{
               int ibyteread = 0;
               String beginmsg=padString("@BEGMSG@");
               String endmsg = padString("@ENDMSG@");
               String fromServer = "";
          if (kkSocket != null ) {
               System.out.println("processRequest");
try {
                         kkSocket.setSendBufferSize(1024);
                         kkSocket.setSoTimeout (10000);
                                   kkSocket.setTcpNoDelay(true);
     os.writeBytes(beginmsg+m_eomChar);
     int i = in.read();
     System.out.println("Data read is :"+i);
     os.writeBytes(padString("PAEL\t1056209\t269732\t02/01/2003")+m_eomChar);
in.read();
System.out.println("Data read is :"+i);
out.flush();
System.out.println("Data read is :"+ibyteread);
os.writeBytes(endmsg+m_eomChar);
ibyteread = in.read();
readResponse(in);
System.out.println("-----end Processing:--------");
} catch (UnknownHostException e) {
System.err.println("Trying to connect to unknown host: " + e);
// Exception thrown when network timeout occurs
catch (InterruptedIOException iioe)
System.err.println ("Remote host timed out during read operation");
catch (Exception e) {
System.err.println("Exception: " + e);
The socket requires data to be of length 1024 character, so the renaining length is padded with empty string"\0"
public String padString(String value){
          StringBuffer strBuff = new StringBuffer(value);
               while(strBuff.toString().length() != 1023){
               strBuff.append("\0");
          //System.out.println("the length is "+ strBuff.toString().length());
          return strBuff.toString();
Close socket
public void closeConnection() throws IOException{
     in.close();
     os.close();
     kkSocket.close();
public String readResponse(BufferedReader in) {
boolean flag = false;
          java.lang.StringBuffer stringbuffer = new      StringBuffer(1024);
try {
// for(char ac[] = new char[1]; in.read(ac, 0, 1) != -1;) {
char ac[] = new char[1024];
if (in.read(ac, 0, 1) != -1) {
stringbuffer.append(ac[0]);
for(; in.read(ac, 0, 1) != -1 && ac[0] != m_eomChar; stringbuffer.append(ac[0]));
if(ac[0] == m_eomChar) {
System.out.println("received '" + stringbuffer.toString() + "'");
} else {
System.out.println("Message received by client was not properly terminated and was ignored."+stringbuffer.toString());
} else {
System.out.println("WARN: no response?");
} catch(java.io.IOException ioexception) {
System.out.println("Error in client " + ioexception + "Killing client.");
          return stringbuffer.toString();

if I were you I would put the lines
kkSocket.setSendBufferSize(1024);
kkSocket.setSoTimeout (10000);
kkSocket.setTcpNoDelay(true);
before connecting to the server, not after the initial message was sent.

Error btm1050: XSL transform error: Unable to write output instance to the following "location". Exception has been thrown by the target of an invocation. Value was either too large or too small for a Decimal.

BizTalk Map error. Can you please suggest what could be the reason for this.

Hi,
You can also use the Map TestTool to test your maps. It uses the BizTalk engine to execute the map. You can select a map that is deployed to the GAC en execute it.
You can download the sample tool with the source code here:
TestTool for BizTalk 2013
http://code.msdn.microsoft.com/Execute-BizTalk-2013-maps-e8db7f9e
TestTool for BizTalk 2010
http://code.msdn.microsoft.com/Execute-a-BizTalk-map-from-26166441
Kind regards,
Tomasso Groenendijk
Blog
| Twitter
MCTS BizTalk Server 2006, 2010
If this answers your question please mark it accordingly

Installation error for Indesign CC "Unable to extract to temp directory. Contact Customer Support EX11". What can I do?

Haven't been able to install Adobe Indesign CC through Creative Cloud. Gives the following installation error "Unable to extract to temp directory. Contact Customer Support EX11". What can I do?

Jeremy Jediel Gongora then it is likely a file permission failure as was previously discussed. You can find details on how to adjust the file permissions of your temp directory at Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.
I would also recommend reviewing your installation log files for additional error messages. You can find details on how to locate and interpret the installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors you discover to this discussion.

Error Log entry Unable to write file with XML Saver

Hi all,
I have just encountered the following problem. I am saving a XML file using the XML Saver. Another BLT reads the file, changes something, and saves it again with the same name.
The file is saved, but the NetWeaver SAP Log gives the error
"Unable to write file /usr/sap/<SID>/JC00/j2ee/cluster/server0/apps/sap.com/xappsxmiiear/servlet_jsp/XMII/root/CM/<folder>/file.xml"
Is it a problem with the new storage mechanism in MII 12? Even if I delete the file first and then save it again with the same name, the error is displayed (though the file is saved).
Michael

Hi Mike,
no, the Debug only says "Begin Action XML Saver" and "End Action XML Saver".
The action however writes the file, the contents has changed after the BLT has run.
Well, I have just tried the Text Saver with the same file (name and contents). It also gives the error. I now wanted to delete the folder. The folder disappered from the workbench view, and the Netweaver log says "Unable to process service message".
I then clicked "publish" on the parent folder and tried to create the folder again, but although the folder was not displayed, the workbench said "the folder already exists". When I start my BLT, it could write the file into the folder which then reappeared in the workbench.
Hm, maybe our installation has some problems? Feels like missing authorizations...
Michael

Error in LSMW Unable to write to file 'C:\ZSIGCO_CP_ZSIG

Hello,
In the Step 9 'READ DATA' I get the Error: 'Unable to write to file 'C:\ZSIGCO_CP_ZSIGCO_CP_ZSIGCO_CP.lsmw.read'
I do not know what the Problem is and how should I solve this Problem.?
Can any body help me sort out this Issue..?
Regards,
Deepak.

Thats right the file specification should look like this :-
ZXX - XX - ZXX Test
Files
Legacy Data          On the PC (Frontend)
Legacy Data          On the R/3 server (application server)
--   Imported Data        File for Imported Data (Application Server)
Imported Data                  ZXX_XX_ZXX.lsmw.read
--   Converted Data       File for Converted Data (Application Server)
Converted Data                 ZXX_XX_ZXX.lsmw.conv<<<----
destination file where to write
Wildcard Value       Value for Wildcard '*' in File Name
Reagrds
Dhirendra

Rep-110 error opening file on a remote unit

hi,
I installed oracle 10g developer suite on my new computer. I also imported the configuration of my old computer (including system variables and regedit) and mounted some network units, where my .fmb and .rdf files are stored.
My problem is: when I try to open a .fmb file by clicking on it, forms builder runs correctly; but when I try to open a .rdf file, I get the rep-110 error: unable to open file!
theese are my FORMS_PATH, REPORTS_PATH, REPORTS_CLASSPATH keys. My .rdf files are stored at B:\ (\\server\forms\10g_src).
Please help!
FORMS_PATH: D:\DevSuiteHome_1\cgenf61\admin;D:\DevSuiteHome_1\forms;K:\forms\10g_src;B:\;F:\;G:\;H:\;I:\;J:\ (B:\.... are my networks units)
REPORTS_CLASSPATH: D:\DevSuiteHome_1\reports\jlib\rwbuilder.jar;D:\DevSuiteHome_1\reports\jlib\rwrun.jar;D:\DevSuiteHome_1\jlib\zrclient.jar;D:\DevSuiteHome_1\j2ee\home\oc4j.jar;D:\DevSuiteHome_1\j2ee\home\lib\ojsp.jar;D:\DevSuiteHome_1\reports\jlib\xrpdsolap.jar;
REPORTS_PATH: D:\DevSuiteHome_1\repadm61\srw;D:\DevSuiteHome_1\cgenr61\admin\crretc;D:\DevSuiteHome_1\cgenr61\admin;D:\DevSuiteHome_1\reports\templates;D:\DevSuiteHome_1\reports\samples\demo;D:\DevSuiteHome_1\reports\integ;D:\DevSuiteHome_1\bin;K:\forms\10g_src;D:\DevSuiteHome_1\reports\printers;

Hello,
You have to check the association for the extension RDF :
in Explorer : tools -> folder options ...
Then follow the steps as indicated in the screenshot :
ftp://ftp.oracle.com/support/outgoing/dsegard/rdf_association.jpg
Regardshi Denis,
that's the solution! I did it two years ago, then I forgot it. thank you

Unable to write at location

Hello
When I try to install the Photoshop update patch CS6 at OSX I get the following error;
Unable to write at location Users/XXX/Libary/Application support/Adobe/ Please provide write permissions to this location and try again. Please help?

Hello Znerkene
I understand that it is difficult to determine which forum to post in since there are so many. This particular forum (sharing and storage) was created to help those transitioning from Photoshop.com to Adobe Revel. I am moving your post to the correct forum so that it can get proper attention.
I'll put I this posting in the Photoshop community so the experts there can help you.
We also have many other forums relating to other Adobe products
http://forums.adobe.com/community/
http://forums.adobe.com
Out of curiosity, can you tell me how you found our forum page?
Thanks
Scott

REP-0124 error - Unable to write to temp

Similar Messages

Maybe you are looking for