REP-1057 Error trying to open a rdf file

Hi,
i have an rdf file that works fine when run from applications (11.5.9). I have to make some changes to the report but when I try to open it in reports developer (6i) I get the error
"Rep - 1057.....is not a valid report builder file'..
Any way around it?
Thanks
A/A

InoL wrote:
Since it runs in Apps, it cannot be corrupted. Maybe there was a problem in copying the file to your PC? I would also say this but i asked in the start that the file is converted to the latest version or not and the answer was that file created in the 6i version. So, i thought that the file in which he is trying to make changes it is in 6i as backup and the file which he is using to run the application it is the separate one.
And i know if the file is running in the application it can not be corrupted but why i mentioned about the corruption i explained above.
-Ammad

Similar Messages

  • I/O error trying to open old AW files

    I have hundreds of old Appleworks files from an older version (5.0) and when I try to open them with my new Intel based iMac using Appleworks 6.2.9 it says
    " An I/O error occurred".
    All I'm trying to do is open the file - not print or anything else. I can't figure it out.
    Need help.
    Larry
    imac   Mac OS X (10.4.8)  

    Yvan Koenig has said he has some AppleWorks 5 files fail to open in AppleWorks 6 with the I/O error. I've never had a problem opening any AppleWorks 5 files whether they were created on a Mac or PC.
    Are you sure that some of these files aren't ClarisWorks 4 or earlier files? AppleWorks 6.2.9 (the current version) can't open all ClarisWorks 4 or earlier files & gives an I/O error. There doesn't appear to be a way to predict which files will cause problems. I've had it happen & not happen with all AppleWorks file types. These files can be opened by any other version of AppleWorks 6.
    I'm not clear if it's one file or all of the files you can't open. If it's just one or a few, I'd think there is some corruption in the file. If it's a lot (more than half) & you're sure they are AppleWorks 5 files, some basic troubleshooting might help.
    First step, delete the AppleWorks 6 preferences as they may be corrupt, particularly the translator cache. See my user tip, AppleWorks has stopped working correctly, for more info.
    Did you move these files from one Mac to another using a USB flash drive or other removable device? If the device is PC-formatted, some information in the files may have been lost in the transfer. Another user tip addresses this problem - AppleWorks 6 won't open my AW 5 files.
    I'd be willing to take a look at two or three of these problem files for you & see if I can figure out where the problem is. E-mail them to me with a subject line of "I/O errors." Just click my name in blue next to this post. My public e-mail address is in the biography section.

  • Error trying to open source media - Compressor 1.2.1

    I have a problem with a movie that have been sent to me. I seem unable to add it to a batch in Compressor or in Final Cut Pro 4.5 HD for the that matter.I'm using QuickTime 7.0.3 adn Mac OS X 10.4.3
    When ever I had it to Compressor I get this error:
    "Alert: Error trying to open source media file"
    http://www.saruken.com/temp/Compressor-Error.jpg
    And when I import it into Final Cut I get this error:
    "File Error: 1 file(s) recognized, 0 access denied, 1 unknown."
    http://www.saruken.com/temp/FCP-error.jpg
    The settings for the offending movie are:
    Format: H.264, 640x480, Millions, AAC, Stereo (L R), 22.050kHz
    FPS: 29.97
    Data Rate: 90 kbytes/sec
    Key Frame: Every 300 Frames
    The only difference between my test, which works fine, and this file is the frame rate (mine is at 25fps) and the number of audio channels (my test was in mono).
    The file I was sent was encoded in Compressor, not sure which one - but I think it might be version 2.
    The strange thing is it opens in QuickTime fine. I've tried exporting from QuickTime Pro as another h.264 with mono sound with no joy. I've tried saving a reference of the movie to see if that works, again no joy.
    The only way I can get Compressor to accept the file is by transcoding it to another codec, like Soreson 3. Then FCP and Compressor are happy.
    What I can't work out is why the h.264 file I made is fine (and any file I still make as well), and the one I was sent is not. I'm also having the same problem with an h.264 file I downloaded from Apple QuickTime Trailers, and an another I found on the web.
    Updates that have been done recently incase they might have caused the problem are 10.4.3 and installing Motion 2 Trail (since removed), which wanted to update Pro Application Support (this might be the problem?).
    Any help greatly apprieated
    Hami

    I just tried the offending movie file on my Powerbook, it has never seen Motion 2 or those Pro Application Support updates - and it gets the same error.
    Very odd indeed - any ideas?
    thanks in advance
    Hami

  • I have design standard with creative cloud, I have installed this on 2 computers, my office and home which I was told was allowed, I have just tried to open an indesign file from the office at home and and error message said that this was created with a n

    I have design standard with creative cloud, I have installed this on 2 computers, my office and home which I was told was allowed, I have just tried to open an indesign file from the office at home and and error message said that this was created with a newer version? they are the same versions and both are up to date, I was asked this morning to put in my adobe id email and password to connect to CC which I have never been asked to do before, can anyone help?

    what's your home version (click help>about) and was that just a warning so you were able to open the file?

  • I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read"

    I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read". I am able to open pdf files in IE and other programs.

    I am encountering the same problem -- though with .qfx files from my bank. This worked fine in Firefox 31 ESR, but since upgrading to Firefox 33.0, I get the "<name>.qfx.part could not be saved, because the source file could not be read" when I attempt to download. (I should add that downloading PDF statements from the same site works fine, and that the qfx downloads work fine in IE and Chrome.)
    I tried safe mode, it is still broken. Tried v34 beta, no luck. I reverted to version 31, it works again.
    I guess I will stick with the older version until a solution is found...or just use an alternate browser to download my financial data.

  • I get an error when trying to open certain PDF files in Lion on Mac.

    I am having trouble opening CERTAIN .PDF files on my MacBook Pro. I am running Lion. The file is attached to a Gmail message as a standard .PDF file.
    This is my error:
    "File "XX" cannot be opened. It may be damaged or use a file format Preview does not recognize."
    I have also downloaded Adobe X reader to see if the compatibility issue is just with Preview. I get an error that the file is "damaged" and cannot be recovered. Meanwhile, the file downloads/opens just fine on Windows XP Office and iOS (on my iPad). So I am thinking that it must be some sort of compatibility issue with Lion.
    So far, other .PDF files open on my MB Pro. I haven't tried all of my saved .PDF files, but I did try a couple.
    Anybody have any suggestions? There seems to be an error with this particular file opening in Lion, but not with the same file opening on another operating system.

    The issue mysteriously resolved itself. I shut down the computer, and the next day I booted back up and tried to open the same file, and everything was OK. Very bizarre, since I had opened it previously on this same MacBook. Anyway, anyone have any insight into what happened?

  • I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file typ

    I shoot with a Canon 7D, have Windows 7 installed on my computer, Adobe CS4 (Bridge & Photoshop). I'm trying to open the CR2 files in Bridge to adjust them before I open them up in Photoshop, but it's giving me an error code saying it's the wrong file type. I downloaded the latest updates for Adobe Raw as well as the DNG converter, however I don't want to have to convert to DNG before opening in Bridge. Please let me know what I can do to open the CR2 files directly in Bridge CS4, thank you!

    Make sure you have the right version...
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications

  • I get error 23132 when trying to open a M4v file

    I use to be able to play m4v files on both iTunes and Quick Time 7. Suddenly, after upgrading iTunes, I get error 23132 when trying to open a M4v file. How do I fix it to view the files on QuickTime?

    There is software you installed to work with your company's cloud service, update it or talk to the developer.
    If it's Apple's software,  then run through this list of fixes.
    ..Step by Step to fix your Mac

  • I´m trying to open an excel file in numbers not being successful. The error msg is unexpectedly error using plugin SFCompatibility can you help me?

    I´m trying to open an excel file in numbers not being successful. The error msg is unexpectedly error using plugin SFCompatibility can you help me? Already changed the extension of the excel document to xlsx an now gives an unknown import error.

    In Excel have you tried saving directly to xls (not xlsx) and opening the xls in Numbers?
    If you have a complicated workbook in Excel that uses lots of Excel's advanced features, Numbers may not be able to handle the import.  It does pretty well on basic things, though.
    If you're just trying to get data into Numbers, then often copy-paste from Excel is easier than trying to open xls files.
    SG

  • PLEASE HELP i get error:The operation couldn't be completed. (com.apple.installer.pagecontroller error -1.) when trying to open a .pkg file downloaded from microsoft store. they said it needs to be dmg but how?

    i get error:The operation couldn’t be completed. (com.apple.installer.pagecontroller error -1.) when trying to open a .pkg file downloaded from microsoft store. they said it needs to be .dmg file but how?

    Student_245,
    are you certain that you’ve completely downloaded the .pkg file — that the download didn’t end prematurely?

  • If am trying to open Indesign cs4 files am getting error plugins required

    i have Adobe Indesign cs4, If am trying to open Indesign cs4 files am getting error plugins required, following plugins are required SCOTCH ROLES.RPLN, SANGAM SERVICER - MAPPER.RPLN, OTICAL KERING.RPLN etc
    After pressing ok again am getting error

    Go to Help > Configure Plugins... and make sure those listed in the first screen are listed and have a checkmark next to them to indicate they are active. That may fix the dictionary problem as well.
    You may also need to reset the prefs. See Replace Your Preferences

  • Error trying to open a chm:

    After a MICROSOFT HTML Help compile, with no errors, when
    trying to open the chm file get: Cannot open the file:mk:@MSITStore
    <followed by the full path> . The file also does not work in
    the application. Tried the currently posted forum suggestion re
    this error being about the "path being too long" - a shorter path
    did not help. This seemed to occur spontaneously. It worked one
    day, and after another compile it did not work. Tried Microsoft
    Support page article 312456 re replacing and registering hhctrl.ocx
    file. Any help would be greatly appreciated.
    Thanks in advance. Joe

    So it looks like something got damaged in that one particular
    project. It claims to compile without error, but perhaps it is
    compiling a truncated version. What kind of file size does the .chm
    have? Is it normal or is it smaller? When you open it do you get
    the Nav pane? Can you click on any topic in the TOC and get it to
    open?
    I ask this because I have seen the compiler stop without
    warning if there is an error in the syntax of the .hhp file. This
    sometimes results in a short file, missing a lot of topics, but
    otherwise "correct" in the eyes of the compiler.
    John

  • Custom Oracle Report errored with Enter Password:  REP-0004: Warning: Unable to open user preference file. REP-0300: ORACLE error occurred. REP-0069: Internal error REP-57054: In-process job terminated:Terminated with error:  REP-300: ORACLE error occurre

    Hi Gurus
    We have created a custom oracle report and concurrent program and when we ran the concurrent program it is error out with below error
    Enter Password:
    REP-0004: Warning: Unable to open user preference file.
    REP-0300: ORACLE error occurred.
    REP-0069: Internal error
    REP-57054: In-process job terminated:Terminated with error:
    REP-300: ORACLE error occurred.
    Can any one help us
    Thanks in advance.
    Kumar

    Please see
    REP-0004 Warning - Unable to Open User Preference File. (Doc ID 26014.1)
    ApPsMaStI
    sharing is Caring

  • I tried to open an Audacity file. I got the following error message: "Warning there is very little free disc space left on this volume. Please select another temporary directory in your preferences. How do I select another temporary directory?

    I tried to open an Audacity file. I got the following error message: "Warning there is very little free disc space left on this volume. Please select another temporary directory in your preferences. How do I select another temporary directory?

    Audacity > Preferences > Directories.  You will probably need to use an external drive as it sounds like you Mac's drive is getting too full???

  • Error trying to open the book.

    When I go to open a new book with Blurb application in InDesign I get a message that says: Error trying to open the book. What can I do about it?

    It's the InDesign CC. I have a MacBook Pro. When I try to open a new book on the application Blurb I get a message saying the InDesign can't open it.

Maybe you are looking for

  • Table Required for Delivered Qty field in Sales Order

    Hi friends I can see confirmed order qty, required qty, quantity committed  in VBEP table. But if you see in sales order Schedule Lines you'll see one more field named as Delivered Quantity. I am not able to find this Delivered Qty in any of the SD t

  • Adobe 6.0 Pro--PDFs created from multiple PDFs don't have bookmarks from structure?

    I'm working with my company's 6.0 Pro (old, I know, but what we've got is what we've got,) on a Windows 7 machine. I've read online that in 6.0, PDFs created from multiple PDFs, by defaut, should have bookmarks from structure that use the original fi

  • Character Mode printing in XP

    How to print a report in charachter mode in XP. In win 98 m/c it is working properly but on win XP m/c it always print character mode into graphic mode. Please help....

  • RFCs / BAPIs for complex use case - offer and account receivable

    Hello, a scenario for testing purposes requires me to make remote function calls. I found almost everything I need in the IDES system I am accessing. What I am still missing, are RFCs or BAPIs to do the following - after selecting materials to be sol

  • Bursting JDE Report with Report Interconnect

    I have a JDE report that calls another JDE report to build a temporary table of pricing and then returns back to the original report to display the information. The report can be ran for multiple addresses and it breaks on address number in the heade