REP 110 & REP 0110 .calling reports from Form 10g(10.1.2.0.2)

Hi All,
We are migrating form from Oracle form 6i to Oracle 10g(10.1.2.0.2). I am calling reports from forms
using Web.Show_Docment(). When we run reports in report builder 10g it works fine.
But when we try to run reports from Forms 10g it throws error which is given below.
We want to run reports from UNIX. After using this url to submit report we get error REP 110 and REP 0110
URL
http://GEM:7777/reports/rwservlet?server=rep_server&report=/u01/forms/QA_Forms10g/GEMREP.rdf+DESTYPE=CACHE+DESFORMAT=HTML+p_user_id=XYZ+p_client=2
ERROR
REP-110: File '/u01/forms/QA_Forms10g/GEMREP.rdf DESTYPE=CACHE DESFORMAT=HTML p_user_id=XYZ p_client=2' not found.
REP-0110: Unable to open file '/u01/forms/QA_Forms10g/GEMREP.rdf DESTYPE=CACHE DESFORMAT=HTML p_user_id=XYZ p_client=2'.
I will really appreciate your help.
Thanks
Sandy

Hello,
You are mixing 2 separators in the URL : & and +
Use only one separator in the URL :
Example :
http://GEM:7777/reports/rwservlet?server=rep_server+report=/u01/forms/QA_Forms10g/GEMREP.rdf+DESTYPE=CACHE+DESFORMAT=HTML+p_user_id=XYZ+p_client=2
Regards

Similar Messages

Call report from form 10g (10.1.2.0.2)

hi
i using win 2003 and db 10g and dev10g ( 10.1.2.0.2)
and i want to call report from my form as following code :
DECLARE
dir varchar2(200);
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
dir:=co$win.get_current_directory ;
repid := find_report_object('CGNV$OFG_REPORT');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,dir||'\rep.jsp');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,runtime);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'HTML');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'rws');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=yes');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' --or rep_status is null
THEN
WEB.SHOW_DOCUMENT('http://hamid:8889/reports/rwservlet/getjobid'||
substr(v_rep, instr(v_rep,'_',-1)+1)||'?server=rws','_blank');
ELSE
message(ER_RP);
END IF;
END;
but i get error :
frm-41213: unable to connect to the report server rws
plz help me

hi
i using win 2003 and db 10g and dev10g ( 10.1.2.0.2)
and i want to call report from my form as following code :
DECLARE
dir varchar2(200);
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
dir:=co$win.get_current_directory ;
repid := find_report_object('CGNV$OFG_REPORT');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_FILENAME,dir||'\rep.jsp');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,runtime);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'HTML');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'rws');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=yes');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' --or rep_status is null
THEN
WEB.SHOW_DOCUMENT('http://hamid:8889/reports/rwservlet/getjobid'||
substr(v_rep, instr(v_rep,'_',-1)+1)||'?server=rws','_blank');
ELSE
message(ER_RP);
END IF;
END;
but i get error :
frm-41213: unable to connect to the report server rws
plz help me

Default file location when calling report from Forms 10G

I've tried this in the reports forum, but it applies equally to forms I guess..
Hi,
I've managed to put together a routine for running a report from a 10G Form. In 6i I specified a "relative path" to my report name as follows:-
"Run_Product(REPORTS, '..\Reports\myreportname', SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id, NULL); "
In 10G I would like to just specify the report name, rather than the full file path. Can I specify a relative file path - or alternatively can I set the default report location in a configuration file?
At the moment I'm having to specify something like:
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,
'c:\oracle\systemname\reports\myreportname.RDF');
I would like to just have:
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,
'myreportname.RDF');
Many thanks,
Keith.

Do you run your application on an application server?
If so you should use the REPORTS_PATH environment variable (in windows registry entry).
Alternatively you could use an environmentid in the reports.conf-file:
<server version="10.1.2.0.2">
<environment id="YOURID">
<envVariable name="REPORTS_PATH" value="C:\......"/>
</environment>
You call the report with the parameter &envid=YOURID in the URL.

Calling reports from forms 10g

Hi,
I have proc reports that are called from the forms.
These proc reports run with host command on the server.
But since now it is AS,so i need to search for the way os taht when client run form through URL,
the text file that proc generated should be visible at client side.
I installed webutil and changed host with client_host but nothing happens.
I am on linux.
Do you have any idea?
Thanks

you can use web.show_document . look for it in Forms help or search this forum.

How to hide URL when calling Reports from Forms 10g.

Hi ,
When end user runs a report through a form then report output is displayed and following type of URL is also generated on address bar of browser: http://server:7778/reports/rwservlet/getjobid22243?server=rep_servername_appsrv
Can we hide this URL so that the user cant change the JOB_ID and get access to other previous reports.
Thanks & Regards,
NL

Actually, there are several options including the one already offered above. Here are a few more:
1. If you are using 10.1.2.3 and a newer JRE on the client (e.g. 1.6.0_10 or newer), you could use java script to open the report. This will not be a perfect solution because it may not work if using a non-IE browser or if java scripting is disabled. Refer to MyOracleSupport Article 265863.1 for more information.
EXAMPLE:
WEB.SHOW_DOCUMENT ('javascript:void(window.open("http://www.oracle.com","","location=no,toolbar=no,menubar=no,"));self.close()','_blank');Replace the url in the above example with the call to your report.
2. Set the age of the cache to a very short value so that it is only available long enough to be viewed by the user who created it. In other words, when setting the reports properties in your Forms code, include the Reports "others" parameter with TOLERANCE=1
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'TOLERANCE=1');This will cause the cache (on the server) to live for only one minute then be deleted. Refer to the Report Deployment Guide for more information.
3. Upgrade to Fusion Middleware (Forms/Reports) 11. In version 11, the Reports jobid can be randomized. See section 18.8.2 of the Reports 11 Deployment Guide
http://download.oracle.com/docs/cd/E14571_01/bi.1111/b32121/toc.htm

URGENT: Calling Reports from Forms (10g)

Hi,
I've tried to understand a pdf file on this subject, but I still can't do what I want.
I need to create a button on a form that, When pressed, calls a report.
Could someone help me showing some code??
Thanks!!

Tiago,
there's a good Whitepaper at http://www.oracle.com/technology/products/forms/pdf/frm9isrw9i.pdf.
Also the papers http://www.oracle.com/technology/products/forms/pdf/10g/frmwebshowdoc_rep.pdf
and
http://www.oracle.com/technology/products/forms/pdf/10g/frmrepparamform.pdf
could be interesting for you.
regards
Rainer

Getting rep-3002 when calling report from form on web

i am getting rep-3002 when i call report from a form on web environment. Report is in character mode. It is coming proper if i change it to bitmap. but my requirement is of character mode. pl. give some solution.

Hello,
If you are running in WinNT/2000 environment, the NT/2000 user which runs the Report Server service must have a printer defined. In the control panel, look at the properties for the Report Server to see what user it runs as. Log in as that user and make sure a default printer is defined.
Regards,
The Oracle Reports Team --skw

Calling Report from Form Error ORA-06508

Dear all,
I want migrate from Fom6i to Oracle Developer Suite 10g (10.1).
Folder Form = C:\APLIORA\IRS\FORM
Folder Report = C:\APLIORA\IRS\REPORT
I have modified file DEFAULT.ENV
FORMS_PATH=C:\APLIORA\IRS\FORM;C:\APLIORA\IRS\REPORT
i do not have problem call a form from form.
but when i call report from form show error ORA-06508 : PL/SQL : could not find program unit being called ; -6508
my procedure is
PROCEDURE Call_Report IS
     list_id ParamList;
BEGIN
list_id := Get_Parameter_List('input_params');
IF NOT Id_Null(list_id) THEN
Destroy_Parameter_List(list_id);
END IF;
list_id := Create_Parameter_List('input_params');
Add_Parameter(list_id,'MAXIMIZE',TEXT_PARAMETER,'YES');
Add_Parameter(list_id,'ORACLE_SHUTDOWN',TEXT_PARAMETER,'YES');
RP2RRO.RP2RRO_RUN_PRODUCT(REPORTS,'TESTREPORT.REP',SYNCHRONOUS,RUNTIME,FILESYSTEM,list_id,null);
END ;
Do I miss something ?
Can any one help ?
Thanks

Hi,
Thank you for your replay.
The problem have solved.
This my step :
1. Install Windows XP SP2 and Form 10.1.2.0.2 on new pc.
2. Install Jinit version 1.3.1.28.
3. Create report server
3. Compile form, report and pll
4. call report from from with this procedure :
PROCEDURE Call_Report (vFILENAME varchar2) IS
report_id                Report_Object;
ReportServerJob VARCHAR2(100);
vc_rep_status      VARCHAR2(100);
repsvr                          varchar2(21) := 'myserv';
userid                         VARCHAR2(100);
pass                          VARCHAR2(100);
Host                    VARCHAR2(100);
BEGIN
userid          := Get_Application_Property(USERNAME) ;
pass          := Get_Application_Property(PASSWORD) ;
Host          := Get_Application_Property(CONNECT_STRING) ;
report_id:= find_report_object('REPORT');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME,vFILENAME||'.jsp');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,repsvr);
ReportServerJob:=run_report_object(report_id);
vc_rep_status := REPORT_OBJECT_STATUS(ReportServerJob);
WHILE vc_rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED', null)
LOOP
vc_rep_status:=REPORT_OBJECT_STATUS(ReportServerJob);
END LOOP;
IF vc_rep_status='FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet?report='||vFILENAME||'.jsp'||'&userid='||userid||'/'||pass||'@'||Host||'&destype=CACHE&desformat=PDF&paramform=yes','_blank');
ELSE
message ('Report failed with error message '|| vc_rep_status);
END IF;
END;
Ok, but i have another strange error. I will post new thread.
Thank you and regards
Teguh S

Calling Report From Form To Many Destinations

Hi
I am calling reports from forms using SET_REPORT_OBJECT_PROPERTY and then run_report_object.
I dont know the destination until runtime of the report which is ok as I can pass this in via my procedure, but if that destination is many ie mail and file what is the best way to distribute the report?
I could call my procedure for each destination but that seems a bit unefficient since the report would be created many times, is there another way?

what about adding a drop-down-list near your report-button where you can choose the destination?
when you click the report-button you simply read the value selected in the drop-down-list and send it to your reports-server too.

Problem in running oracle report from form 10g Version 10.1.2.0.2

Hi All,
I am facing problem while running the report from forms 10g getting FRM-41219
For this i am using the following procedure :
PROCEDURE RUN_REPORT IS
L_RUN_TEXT VARCHAR2 (2000);
L_USRID VARCHAR2 (100);
L_PASSWD VARCHAR2 (100);
L_DESNAME VARCHAR2 (100);
FILE_OUT_PUT VARCHAR2(200);
REP_STATUS VARCHAR2(20);
REP_NAME VARCHAR2(50);
PL_ID PARAMLIST;
REP_URL VARCHAR2(2000);
V_REP VARCHAR2(200);
BEGIN
display_me('RUN_REPORT');
-- CALL THE FOLLOWING FUNCTION, IN WHICH USER CAN WRITE HIS OWN CODE.
-- THE PROCEDURE CAN BE MADE LOCAL TO THE SPECIFIC FORM AND WRITE THE CODE.
-- IT SHOULD RETURN 'Y', IF YOU WANT TO PROCEED WITH THIS RUN_REPORT
-- PROCEDURE.
IF NVL (RUN_REPORT1, 'Y') = 'N' THEN
RETURN;
END IF;
COMMIT_FORM;
IF (GET_APPLICATION_PROPERTY (OPERATING_SYSTEM)) = 'UNIX' THEN
L_DESNAME := 'LP';
ELSE
L_DESNAME := NAME_IN ('REPORT_TITLE.F_FILE_NAME');
display_me(L_DESNAME);
END IF ;
/* SETTING THE REPORT OBJECT PROPERTIES */
/* G_PRAM1 IS THE NAME OF REPORT ****/
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_SERVER,'172.18.76.34');
SET_REPORT_OBJECT_PROPERTY('REPOBJ',REPORT_FILENAME,:GLOBAL.G_PARAM1||'.REP');
display_me(':GLOBAL.G_PARAM1 '||:GLOBAL.G_PARAM1);
PL_ID := GET_PARAMETER_LIST ('REP_PARA');
IF NOT ID_NULL (PL_ID) THEN
DESTROY_PARAMETER_LIST ('REP_PARA');
END IF;
PL_ID := CREATE_PARAMETER_LIST('REP_PARA');
ADD_PARAMETER (PL_ID, 'DESTYPE' , TEXT_PARAMETER, NAME_IN ('REPORT_TITLE.RAG_DESTINATION') );
ADD_PARAMETER (PL_ID, 'DESNAME' , TEXT_PARAMETER, L_DESNAME);
ADD_PARAMETER (PL_ID, 'COPIES' , TEXT_PARAMETER, NAME_IN ('REPORT_TITLE.F_NO_COPY') );
ADD_PARAMETER (PL_ID, 'ORIENTATION', TEXT_PARAMETER, 'LANDSCAPE');
ADD_PARAMETER (PL_ID, 'MODE' , TEXT_PARAMETER, 'BITMAP');
ADD_PARAMETER (PL_ID, 'PARAMFORM' , TEXT_PARAMETER, 'NO');
ADD_PARAMETER (PL_ID, 'PARAM' , TEXT_PARAMETER, NAME_IN ('IBP_REPORT_PARAMETER.F_REP_SEQ') );
ADD_PARAMETER (PL_ID, 'P_COMP_CODE' ,TEXT_PARAMETER,:GLOBAL.G_COMP_CODE);
display_me(':GLOBAL.G_COMP_CODE '||:GLOBAL.G_COMP_CODE);
REP_NAME := :GLOBAL.G_PARAM1||'.REP';
display_me('REP_NAME'||REP_NAME);
V_REP := RUN_REPORT_OBJECT('REPOBJ');
display_me('V_REP '||V_REP);
REP_STATUS := REPORT_OBJECT_STATUS(V_REP);
display_me('REP_STATUS'||REP_STATUS);
WHILE REP_STATUS IN ('RUNNING','OPENING_REPORT','ENQUEUED')LOOP
REP_STATUS := REPORT_OBJECT_STATUS(V_REP);
END LOOP;
IF REP_STATUS = 'FINISHED' THEN
REP_URL:='/REPORTS/RWSERVLET/GETJOBID'||SUBSTR(V_REP,INSTR(V_REP,'_',-1)+1)||'?'||'SERVER=172.18.76.34';
display_me('REP_URL '||REP_URL);
WEB.SHOW_DOCUMENT(REP_URL,'_BLANK');
ELSE
MESSAGE('ERROR WHEN RUNNING REPORT');
END IF;
END;
Which is called on a button , can any body share there idea to help out
Warm Regards
Ashutosh

Yes, I have replace the userid with scott/tiger@orcl with i6menu/i6menu@vbs and also replace the OAS server's name as you have suggested.
declare
REP_URL varchar2(2000);
begin
REP_URL:= '/reports/rwservlet?userid=i6menu/i6menu@vbs&report=testrep_10g.rdf&desformat=pdf&destype=cache&paramform=no';
WEB.SHOW_DOCUMENT(REP_URL,'_BLANK');
end;
I had the 2nd code also but both r not working on my machine ......... !!
I have made the following setting on my machine:
1. Registry -> HKEY_LOCAL_MACHINE -> SOFTWARE-> ORACLE-> KEY_DevSuiteHome1->FORMS_PATH ->
Values is : D:\vision_soft\VSS\exe
2. Registry -> HKEY_LOCAL_MACHINE -> SOFTWARE-> ORACLE-> KEY_DevSuiteHome1->REPORTS_PATH ->
Values is : D:\vision_soft\VSS\exe
3. Entry made in the DevSuiteHome_1\forms\server ->default.env
FORMS_PATH=D:\vision_soft\VSS\exe
4. Entry made in the DevSuiteHome_1\reports\confr ->rwservlet.properties
#SERVER= rep10
As my forms is working well & but the report are not able to call.
Could you please let me know is there is any other mandatory setting required for the report 10g.
Regards,
Ashutosh

Call report under form 10g

how I call report under form 10g from Push Button trigger without haveing Oracle Application Server ? is there any way to do so ?
Thanks

You use the run_report_object. See the help file for information on how to use it.
By the way, you must use the Application Server to use Forms. It's an integral part of Forms.

Calling reports from forms...i have 10 days left to find a solution please!

here is the scenario
i connect to a oracle 9i server from home. i use winxp and 9i Developer to create database applications. when i need to run forms i have to start an OCJ4 Instance, i have a problem though....
i need to run a report from a form and have tried the following methods:
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
BEGIN
repid := find_report_object('rptRequest');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, RUNTIME);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, SCREEN);
v_rep := RUN_REPORT_OBJECT(repid);*/
END;
this results in REP-0503 "You did not specify the name of a report"
i have also tried:
WEB.SHOW_DOCUMENT('http://localhost:8888/reports/server=repSRV&report=rptRequest.rdf&desformat=pdf&userid=user/pass@ORASERV&paramform=no');
but this display page cannot be found.
Where is the report server i should be pointing to?
thanks for your help

Michael,
the default Reports Services is started by a request to the Reports Servlet "rwservlet". To run Reports from Forms I suggest to install the Reports Services as a separate process that can be controlled by a Windows Service
iDS Home\bin rwserver -install <Reports Services name you want to use>
This creates a Windows Service for you that starts/stope the Reports Server. In Forms you use set_report_object_property() built-in to set the Repors services name to teh one specifie when installing the Reports Services process. Alternatively you can set the name in teh Report node property palette.
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, SCREEN);
This is not a valid option when running a report on Reports Services. Try destype CACHE and set the desformat to either HTML, HTMLCSS or PDF.
Read http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf and 10 days no longer should be a problem.
Frank

Calling report from form. Need PDF output

I am calling a report from a form using RUN_PRODUCT. I need to display the form in PDF format. When the user clicks the button in the form to run the report, acrobat reader should open up and the report displayed there. Please help.
Thanks

Thanks for the response. The first part worked. I am able to get the output in PDF format. In the 2nd part where I want to open acrobat and display the output, I am having some trouble with the code. When I compile, it says
win_api_environment.read_registry must be declared. Is there some package I need to attach?
Also, in the After reports trigger, how do I pass vFile (I am assuming this is the PDF file name)?
Thanks
The first thing you'll want to do is pass parameters to the report IE DESTYPE, DESNAME and DESFORMAT where these could be FILE, 'c:\temp\report' and PDF.
Then, you can try this piece of code I wrote (with some help from other people at Metalink and here) sometime back. Now, I call it from forms, but in your case, you'd have to run it in the after report trigger. Since with RUN_PRODUCT you don't know when the report is finished, if you did it from the form, it wouldn't work correctly.
PROCEDURE OPEN_PDF(vFile IN VARCHAR2)
IS
vcServerApp varchar2(40);
vcServerTag varchar2(600);
vcCommand varchar2(2000);
iArgPos pls_integer;
dummy NUMBER;
BEGIN
-- 1 get the Server App for .PDF files
vcServerApp := win_api_environment.read_registry('HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\.PDF','',true);
-- 2 get the executable
vcServerTag := 'HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\'||
vcServerApp||'\SHELL\OPEN\COMMAND';
vcCommand:= win_api_environment.read_registry(vcServerTag,'',true);
-- 3 Sort out how to specify the Filename
iArgPos:= instr(vcCommand,'%1');
if iArgPos = 0 then --no substitution Var on the command line
vcCommand := vcCommand||' '||vFile;
else
vcCommand := substr(vcCommand,1,(iArgPos-1))||
vFile||substr(vcCommand,(iArgPos+2));
end if;
-- 4 Run using Winexec (or Host if preferred).
win_api_shell.winexec(vcCommand);
EXCEPTION
when no_data_found then
abortt('Acrobat Reader was not found! Please consult with your help desk to install it and try again.','N');
END;
Chad
I am calling a report from a form using RUN_PRODUCT. I need to display the form in PDF format. When the user clicks the button in the form to run the report, acrobat reader should open up and the report displayed there. Please help.
Thanks

Calling report from form in Web environment

Hi,
We are in the process of migrating our C/S appication (developed in Developer2k) to intranet using OAS. My question :
a) Is there any other way to call report from a form other than web.show_document?
b) When a report is called from the report server(using web.show_document), a log-in screen comes up unless the login and password is passed as parameter. Only problem with this is the password shows in the URL. Is there any other way to make the call so that the login & password does not show and the user won't have to login a second time to run the report?
Any reply would be appreciated..Thanks

1. Yes you can use run_product package procedure to call reports on web, Oracle documentation says that run_product command will run in web env.
2. Yes you can hide username & password from user, it depends on which method you are using to call reports, if you are using web cgi then add username & password in file "cgicmd.dat" and "oascmd.dat" for web catridge or in cartridge parameter setting you will find this files in directory "\orant\report60\server\".
Darshan Desai
[email protected]
null

FRM-41219 - Cannot able to call reports from form generated in Designer

Hi
I'm trying to call a report from form whit a button generated in Designer 10.1.2.0.2
But I'm getting error : FRM-41219 Invalid report id
I'm tying with a menu but I'm getting the same error.
Please help me

Note 1056653.6
FRM-41219 Cannot Find Report: Invalid ID
Problem Description:
You are getting error: FRM-41219 Cannot Find Report: Invalid ID
Problem Explanation:
The code is using find_report_object and passing a report name to the function.
The statements are as follows:
DECLARE
repid REPORT_OBJECT;
BEGIN
repid := FIND_REPORT_OBJECT('report1');
END;
Solution Explanation:
The error message frm-41219 is a new error code which corresponds to the
Oracle Developer forms/report integration.
This message essentially means that the report cannot be found. Specifying the
correct name of a report object found in the forms object navigator (not the
actual name of the rdf file) usually resolves the problem.

REP 110 & REP 0110 .calling reports from Form 10g(10.1.2.0.2)

Similar Messages

Maybe you are looking for