REP-1212: Object is not fully enclosed by its enclosing object 'Body'

I have a report with a lot of information...and i still need to put stuff below the end line. This has to be possible! the end line is at 9, and i cant go put a frame below it? Please, help!

To my knowledge there should be a master frame that contains everything else. I'm assuming you used the wizard to setup your layout thus far. Make sure your new frame is within the master frame. Also, you'll need to be careful that the fields in your new frame repeat at the right level. The one thing that has annoyed me with report builder, is even though one object looks like it is inside of another, it may not always be the case. Try Expanding your master frame if your having problems with that so that you get your new frame created clearly within its borders. Then collapse the master frame back down to an appropriate size. Good luck.

Similar Messages

  • REP-1212: Object 'Body' is not fully enclosed by its enclosing object 'p_in

    I got this error when I add more columns to an EBS standard oracle report.
    REP-1212: Object 'Body' is not fully enclosed by its enclosing object 'p_in_invoice_type_high'.
    but, p_in_invoice_type_high is a user parameter.
    what can I do for this?

    Hi,
    You can take the following actions to correct this error:
    Case 1: Move or resize the object so that it does not extend outside the page boundary. Alternatively, increase the page size in the Report Property Inspector.
    Case 2: Using Arrange--\>Send to Back, Arrange--\>Bring to Front, Arrange--\>Move Backward, and Arrange--\>Move Forward, arrange your repeating frames such that, in terms of layers, the following is true: repeating frames are below repeating frames that they contain and down repeating frames are below across repeating frames.

  • Aging 7 Buckets Report ARXAGMW  error REP-1212 Object Body is not enclosed

    Hi
    I am customising standard AR Aging 7 buckets report by account(ARXAGMW).
    I just need to add 2 fields,That i have added successfully.
    But the report output format is not printing properly.
    I mean if there are 4 columns custname,custno,endcustname,endcustno.
    it is printing the output as
    custname custno endcustname endcustno
    abc communications inc 1234 abc communicatio 1234
    xyz communications inc 5678 pqr communicatio 9657
    but i want to print with full name(endcustname) as how it is printing for custname.
    So itried to increase the report width to 300 and try to run the report,but i am getting the error.
    I tried with standard report also by increasing the width but same error.
    Could anyone please tell me when we increase report width what else i should change.
    The error is
    REP-1212: Object 'Body' is not fully enclosed by its enclosing object 'P_REPORTING_ENTITY_NAME'.
    Thanks,
    Malla

    Hi,
    "Not allowing" means? Do you get any error?
    Is this the same style used by this concurrent program? I assume that the report type is text.
    If the report type is bitmap, size the page size in the "Execution Options" field as "PAGESIZE= <width>x<height>" and submit the report again.
    Note: 297522.1 - How to investigate printing issues and work towards its resolution ?
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=297522.1
    Regards,
    Hussein

  • REP-1212: Object 'Body' is not fully enclosed by its

    I get this error when I run a report. Where can I get explaination for these error id like (REP-1212).
    Thanks
    null

    I had the same error with Landscape orientation report. But when I go to design, Tools, Preferances, Runtime setting and specify Page Width and Heigth like 11 and 8.5 then my report is working.
    I'd like to figure out how I can save this setting. Every time I close the report and run it again I have to put these setting.If somebody know, please, help.

  • REP-1212 Object Body  is not fully enclosed by its enclosing object

    HI
    I have created new report, after finishing layout module i have started run this report. at that moment
    i am getting error.
    pl help me
    Regs
    Dhanalakshmi

    Hi,
    Go to Object Navigator --&gt; layout Model --&gt; property palette of Header/Main section and change the width and height values according to ur requirement.
    Regards
    Kiran

  • REP-1212: Object 'R_MASTER' is not fully enclosed by its enclosing object '

    hi 2 all
    My report is running properly in report builder 10g , but when i call from Oracle Application R12 then
    following error message display.
    REP-1212: Object 'R_MASTER' is not fully enclosed by its enclosing object 'Body'.
    i also check all repearting fram in enlarge view, no object is overlap .
    Kindly help me to reslove this issue .
    Thanks
    zulqarnain

    Please see (How to investigate printing issues and work towards its resolution ? [ID 297522.1]) -- Search for "REP-1212" error.
    REP-1212
    https://forums.oracle.com/forums/search.jspa?threadID=&q=REP-1212&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • REP-1212: Object  is not full enclosed by its eclosing object body

    hi am in oracle report 11gR2 am geting this error when running my report REP-1212: Object  is not full enclosed by its eclosing object body

    Inol,
    Even I have the same error. My report width doesnt exceeds the vertical border. But as my report is a bigger(2 page report), vertically expanded into the 2nd page.
    I tried putting a main frame which holds 2 pages. Didn't worked.
    Tried putting a Main frame which holds 2 pages and each page with another frames which holds the objects of the respective pages. Didn't worked.
    I jus put 2 frames per page which holds objects of their page respectively. Didn't worked.

  • REP-1212

    Hi friends,
    I have a report APXINHIS.rdf which resides on our Linux Application Server. I want to revise it so I copy it
    to my Windows XP. Both reports builder versions are the same 6.0.8.28. At first I just want to check how the output
    looks as it is without revision, so I just recompile it and run. But I got error :
    REP-1212: Object 'Body' is not fully enclosed by its enclosing object
    Is there an automatic conversion made by the client report builder that changed the source code? It is really
    depressing and disappointing to see errors when you did not do anothing to it.
    Please help....
    Thanks a lot

    Hello Samantha,
    I have often said: "Oracle Reports is the biggest hinderance to my productivity.".
    With that being said, take a look at the report layout overall - use the <ctrl>- (control minus) to look at it from a "50,000 foot view". You should see where something has strayed outside the boundries of your page. Just squeeze them back in and this error should go away.
    Good luck,
    Don.
    You can reward this reply by marking it as either Helpful or Correct :)

  • Rep-1813:object r_supp_name too large to fix in matrix cell.

    hi all,
    im getting an issue while running orale report.
    i used layout model as matrix.
    im getting error as:
    rep-1813:object r_supp_name too large to fix in matrix cell.
    r_supp_name is repeating frame of supplier_name field.
    i had already set maximum number of records but still my issue not solved.
    im unable to rectify it anyone please help me.
    thanks,

    Dear,
    I am facing the same problem my question is that you resolve your issue about REP-1813 or still pending if solved kindly share with us.
    Regards,
    K.J.J.C

  • Inboun IDOC status 52--Application document not fully posted

    Hi,
    In Inbound IDOC, the status code is 52 ---> Application document is not fully posted(satus of the inbound idoc is in yello colour). I want to reprocess this idoc in BD87 t.code in order to convert the yellow colour to green colour. Before reprocessing the IDOC, i need to rectify the problem and then reprocess the idoc in bd87. am i correct? if yes, what i need to do to solve the error --->application document not fully posted. Please guide me friends.
    Thanks in advance.
    Regards,
    Sri

    I am attaching how we documented the process in our troubleshooting guide.  Graphics were not pasted.
    21.3       Manually run IDOCs reported as 52.
    It is possible that IDOCs are found in status 52 for the daily updates.   In principle IDOCs 52 can not be re-proceeed, but there is a way to push the appropriate data from a source system, e.g. ERP.    Following is the process.
    21.3.1     You find IDOCs in status 52 in WE02.
    21.3.1     Open table EDIDS.
    Perform 2 searches for parameter STAPA2 and STAPA1 in status 52 and download the entries for each column to an MS Excel file.
    21.3.2     Adjust the MS Excel file.
    The strings STAPA2 and STAPA1 have to be truncated and separated into 3 different fields for processing:  First 2 characters are the Plan Number, next 2 the Object Type, and next 8 the Object Number.
    21.3.3     Manually process the entries via transaction PFAL from the source system, e.g. ERP.
    The entries must be processed in the following order sorting by Object Name:
    u2022     STAPA2s first, then STAPA1s.  
    u2022     Each organized by O, S, P, C, and CP.
    21.3.3.1     Running individually for each entry.
    By running PFAL with the individual entries:  Plan number, Object Type, Object Number,  Update mode,  Target Logical System name  ... the respective IDOC will be passed to target system for processing.
    21.3.3.2     If there are many entries for processing.
    If there are many STAPA2 and STAPA1 for processing.
    u2022     Create a text file like the one below with the entries as mentioned above.
    u2022     Logon into the source system and make sure CATTs are allowed..
    u2022     Via SCAT, create a CATT that emulates the execution of PFAL entering Plan number, Object Type, Object Number, Update mode,  Target Logical System name  ... the respective IDOCs will be passed to the target system for processing.
    . Create the text file with the entries.
    .  Execute the CATT ... the respective IDOCs will be passed to target system for processing.

  • LSMW Error - You have not fully maintained the descriptions

    Hi Experts,
    I was trying to Extend the materials to plant by using Direct input menthod where prog - RMDATIND.
    When I execute final step i.e "Start Direct Input Program" I faced with an error " You have not fully maintained the descriptions".
    I know this error with regards to Language Key and Description.
    I executed Display converted data under structure BMMH5, where Language key is blank.
    Kindly guide me why this language key is not captured, and also how to default the Language key as EN.
    Thanks nd Regards,
    Laxmi.........

    LSMW u2013 Legacy System Migration Workbench
    1.        Maintain object attributes
    2.        Maintain source structures
    3.        Maintain source fields
    4.        Maintain structure relations
    5.        Maintain field mapping and conversion rules
    6.        Maintain fixed values, translations, user-defined routines
    7.        Specify files
    8.        Assign files
    9.        Read data
    10.     Display read data
    11.     Convert data
    12.     Display converted data
    13.     Create batch input session
    14.     Run Batch Input session

  • In combobox 'g' is getting cut off, 'g' is not fully visible

    Hi Flex people,
    I am facing problem in combobox, I have the items : 'moon' , 'manager' , 'marketing' in the combobox.
    The text 'moon' is fully visible, but the in text 'manager' , 'g' is cut off, means character 'g' is not fully visible.
    Please give solution to how to make the 'g' to visible in  the selected item of combobox.
    Please find the attached snapshot, that will give clear idea.
    Thanks,
    Sushant

    Try this component:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:ComboBox xmlns:mx="http://www.adobe.com/2006/mxml" creationComplete="init();" updateComplete="adjustComboDropDownWidth();"
        buttonMode="true">
        <mx:Script>
        <![CDATA[
            import mx.controls.List;
             private var _selectedValue:String;
             private var _selectedLable:String;
             private var bSelectedValueSet:Boolean = false;
             private var bDataProviderSet:Boolean = false;
             [Bindable]
                private var myDropdownFactory:ClassFactory;   
             // Override committ, this may be called repeatedly
             override protected function commitProperties():void
                // invoke ComboBox version
                super.commitProperties();
                // If value set and have dataProvider
                if (bSelectedValueSet && bDataProviderSet)
                   // Set flag to false so code won't be called until selectedValue is set again
                   bSelectedValueSet=false;
                   // Loop through dataProvider
                   for (var i:int=0;i<this.dataProvider.length;i++)
                      // Get this item's data
                      var item:String = this.dataProvider[i].data;
                      // Check if is selectedValue
                      if(item == _selectedValue)
                         // Yes, set selectedIndex
                         this.selectedIndex = i;
                         break;
             // Trap dataProvider being set
             override public function set dataProvider(o:Object):void
                // invoke ComboBox version
                super.dataProvider = o;
                // This may get called before dataProvider is set, so make sure not null and has entries
                if (o!=null && o.length)
                   // Got it, set flag
                   bDataProviderSet = true;
             // set for selectedValue
             public function set selectedValue(s:String):void
                // Set flag
                bSelectedValueSet = true;
                // Save value
                _selectedValue = s;
                // Invalidate to force commit
                invalidateProperties();
              * @author       : Prashant Shelke.
              * @date         : 17/10/07
              * @method name : init()
              * @i/p params  : -
              * @return            : void
              * @description : To show tool-tip on line items objects of combobox.
              public function init():void
                    myDropdownFactory         = new ClassFactory(List);
                    myDropdownFactory.properties = {showDataTips:true, dataTipFunction:myDataTipFunction}
                    this.dropdownFactory    = myDropdownFactory;
                 private function myDataTipFunction(value:Object):String
                    return (value.label);
               * @author       : Prashant Shelke.
              * @date         : 17/10/07
              * @method name : adjustComboDropDownWidth()
              * @i/p params  : ComboBox
              * @return         : Number
              * @description : computes dropdown width according to what dataprovider provided to it.
              private function adjustComboDropDownWidth():void
                      this.dropdownWidth    = calculateCustomPreferredSizeFromData();                  
              * @author       : Prashant Shelke.
              * @date         : 16/10/07
              * @method name : calculateCustomPreferredSizeFromData()
              * @i/p params  : -
              * @return            : Number
              * @description : computes dropdown width according to what dataprovider provided to it.
              public function calculateCustomPreferredSizeFromData():Number
                    var dropDownWidth:Number    = this.calculatePreferredSizeFromData(this.dataProvider.length).width+14;
                    if(dropDownWidth > this.width)
                        return dropDownWidth;
                    else
                        return this.width;
          ]]>
       </mx:Script>
    </mx:ComboBox>

  • Export error from Rep. Object Navigator

    Hi
    I got an error CDI-22582 when I tried to export container or workarea from Rep. Object Navigator. Errlog.err file contains this:
    EXP-00056: ORACLE error 12154 encountered
    ORA-12154: TNS:could not resolve service name
    EXP-00000: Export terminated unsuccessfully
    Everything is OK with my TNS. I can successfully connect to Rep. DB from Designer or Enterprise Manager. I'm using:
    Designer6i v. 6.5.40.20.0 c.4.012
    Thanks.

    Nenad,
    There are various causes to this issue. The most common one is the following:
    When you connect to your repository, you use the TNSNAMES.ORA from the Designer Oracle Home.
    When you export from Designer, it can be (depending on the registry variables EXECUTE_EXPORT) that you use the export executable from another Oracle Home, what means it uses a different TNSNAMES.ORA
    Could you please check if it's the case?
    If it is, make the file tnsnames.ora in both Oracle Homes identical.
    If you have access to MetaLink, I would recommend you to have a look to Note 160378.1: Common causes of CDI-22582 during export/import in Designer 6i and 9i
    Hope this helps,
    Didier.

  • UI not fully updated after transitions (only on Linux)

    After a transition of an object  the UI is not fully updated. One can still see "lines" from the "movement".
    This only happens on Linux (Debian) and not on Windows. Is this a known issue that has been fixed in later Javafx releases ?
    I am still using Java7 because of WinXP support
    Thanks for help

    > Is this a known issue that has been fixed in later Javafx releases ?
    I don't know, try a later JavaFX release and see. 
    If you still have an issue, create a reproducible, minimal, executable test case and log a bug with the test case and your full environment details - full Java version (e.g. 7u75), OS version,  graphics hardware, graphics driver version, etc.
    Using Java 7 is not advised because it will cease to be publicly supported in about month.
    There are many JavaFX bugs which were fixed for Java 8 which will never be fixed for Java 7.
    Supporting Windows XP is not advised as not even Microsoft support that.

  • User Mapping not fully Available Error

    Hi
    while connecting from EP to Sap R/3
    created folder in System Administration and System object as Dedicated
    system name: sapsystem - next - finish
    selected propety category :Connector
    AppHost : 101.110.110.105
    Remote Host : 3
    SAP Client : 800
    SAP SYstem name : global
    SAP SYstem ID : 00
    SAP Server Port : 3200
    System TYpe : SAP_R3
    SAVE
    Property Category : usermanagement
    logon method - UIDPW
    user mapping type - admin,user
    SAVE
    System alias as (sys1)
    User Administration - UserMapping- search
    Administrator in Users - start - edit-
    System alias - sys1
    user - sapuser i.e( R/3 server)
    password - xyzabc
    SAVE
    then raising error Portal Runtime error
    User Mapping not fully Available
    with Exception id
    Regards
    Rakesh

    Hi,
    First you must import sap crptographic toolkit from help.sap.com, following link: http://help.sap.com/saphelp_nw2004s/helpdata/en/04/d246215f1d4f588d1d9c49391acb01/frameset.htm
    Here be careful to follow all the steps, have a look at the link and the subt topic deploying crptographic toolkit.
    Onec you have done that, restart the portal and related services.
    Now it is possible that you might face other new probles or exceptions.
    In that case you might need to update your jce files etc.
    Please refer to the sap note: 796540
    in that case

Maybe you are looking for