REP-1212: Object 'R_MASTER' is not fully enclosed by its enclosing object '

hi 2 all
My report is running properly in report builder 10g , but when i call from Oracle Application R12 then
following error message display.
REP-1212: Object 'R_MASTER' is not fully enclosed by its enclosing object 'Body'.
i also check all repearting fram in enlarge view, no object is overlap .
Kindly help me to reslove this issue .
Thanks
zulqarnain

Please see (How to investigate printing issues and work towards its resolution ? [ID 297522.1]) -- Search for "REP-1212" error.
REP-1212
https://forums.oracle.com/forums/search.jspa?threadID=&q=REP-1212&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Similar Messages

  • REP-1212: Object 'Body' is not fully enclosed by its enclosing object 'p_in

    I got this error when I add more columns to an EBS standard oracle report.
    REP-1212: Object 'Body' is not fully enclosed by its enclosing object 'p_in_invoice_type_high'.
    but, p_in_invoice_type_high is a user parameter.
    what can I do for this?

    Hi,
    You can take the following actions to correct this error:
    Case 1: Move or resize the object so that it does not extend outside the page boundary. Alternatively, increase the page size in the Report Property Inspector.
    Case 2: Using Arrange--\>Send to Back, Arrange--\>Bring to Front, Arrange--\>Move Backward, and Arrange--\>Move Forward, arrange your repeating frames such that, in terms of layers, the following is true: repeating frames are below repeating frames that they contain and down repeating frames are below across repeating frames.

  • REP-1212: Object  is not full enclosed by its eclosing object body

    hi am in oracle report 11gR2 am geting this error when running my report REP-1212: Object  is not full enclosed by its eclosing object body

    Inol,
    Even I have the same error. My report width doesnt exceeds the vertical border. But as my report is a bigger(2 page report), vertically expanded into the 2nd page.
    I tried putting a main frame which holds 2 pages. Didn't worked.
    Tried putting a Main frame which holds 2 pages and each page with another frames which holds the objects of the respective pages. Didn't worked.
    I jus put 2 frames per page which holds objects of their page respectively. Didn't worked.

  • REP-1212: Object 'Body' is not fully enclosed by its

    I get this error when I run a report. Where can I get explaination for these error id like (REP-1212).
    Thanks
    null

    I had the same error with Landscape orientation report. But when I go to design, Tools, Preferances, Runtime setting and specify Page Width and Heigth like 11 and 8.5 then my report is working.
    I'd like to figure out how I can save this setting. Every time I close the report and run it again I have to put these setting.If somebody know, please, help.

  • REP-1212: Object is not fully enclosed by its enclosing object 'Body'

    I have a report with a lot of information...and i still need to put stuff below the end line. This has to be possible! the end line is at 9, and i cant go put a frame below it? Please, help!

    To my knowledge there should be a master frame that contains everything else. I'm assuming you used the wizard to setup your layout thus far. Make sure your new frame is within the master frame. Also, you'll need to be careful that the fields in your new frame repeat at the right level. The one thing that has annoyed me with report builder, is even though one object looks like it is inside of another, it may not always be the case. Try Expanding your master frame if your having problems with that so that you get your new frame created clearly within its borders. Then collapse the master frame back down to an appropriate size. Good luck.

  • REP-1212 Object Body  is not fully enclosed by its enclosing object

    HI
    I have created new report, after finishing layout module i have started run this report. at that moment
    i am getting error.
    pl help me
    Regs
    Dhanalakshmi

    Hi,
    Go to Object Navigator --> layout Model --> property palette of Header/Main section and change the width and height values according to ur requirement.
    Regards
    Kiran

  • Object scaling does not seem to work correctly with objects containing Bezier curves

    I created a closed object that had a Bezier curve as part of it's definition. I wanted to scale it by 110% and then use this second enlarged object to create a sort of a background underneath the first object to create a sort of a shadow effect. But rather than the second object being uniformly larger than the first it intersects the original object in ways that don't make sense to me.
    Is there an easier/differnt way to create an effect like this? I can do it but have to manually adjust a lot of points in the new object so that they create a uniformly larger version of the original object but it's a lot of effort for something that works fine for normal polygons with straight lines (e.g. a star with 5 points).
    Thanks for any suggestions or ideas.
    -Bubba
    ps - i've attached an image of what I get with this technique of creating two examples of two objects one a 110% scale version of the other. The first star shows the effect I'm trying to get and the second shows the problem (the red border does not surround the black object uniformly around the perimeter)

    Bubba,
    Referring to post #16 (trying to get it more right from the start than in post #15),
    the scaling will be symmetric with parallel segments if the original object is rotationally symmetric and reflectionally symmetric about two orthogonal axes, and that is also the case.
    The scaling of the object in post #16 is in fact symmetric because corresponding segments of original and scaled object have the same distance all the way round.
    The five star in the OP is rotationally symmetric but only reflectionally symmetric about one axis, so the segments are parallel, but the scaling is not symmetric because there different distances between corresponding segments, even though you were actually satisfied with it:
    The first star shows the effect I'm trying to get and the second shows the problem
    This could be mended by scaling from the centroid.
    If you need to have the same distance between all the segments of original and scaled object, with scaling you are restricted to objects where all segments start and end at the same distance from the centroid, as in regular polygons (including the square), regular stars, and the circle (with its curved segments). Objects with curved segments derived from regular polygons and stars will have varying distances and non parallellism within each segment.

  • Aging 7 Buckets Report ARXAGMW  error REP-1212 Object Body is not enclosed

    Hi
    I am customising standard AR Aging 7 buckets report by account(ARXAGMW).
    I just need to add 2 fields,That i have added successfully.
    But the report output format is not printing properly.
    I mean if there are 4 columns custname,custno,endcustname,endcustno.
    it is printing the output as
    custname custno endcustname endcustno
    abc communications inc 1234 abc communicatio 1234
    xyz communications inc 5678 pqr communicatio 9657
    but i want to print with full name(endcustname) as how it is printing for custname.
    So itried to increase the report width to 300 and try to run the report,but i am getting the error.
    I tried with standard report also by increasing the width but same error.
    Could anyone please tell me when we increase report width what else i should change.
    The error is
    REP-1212: Object 'Body' is not fully enclosed by its enclosing object 'P_REPORTING_ENTITY_NAME'.
    Thanks,
    Malla

    Hi,
    "Not allowing" means? Do you get any error?
    Is this the same style used by this concurrent program? I assume that the report type is text.
    If the report type is bitmap, size the page size in the "Execution Options" field as "PAGESIZE= <width>x<height>" and submit the report again.
    Note: 297522.1 - How to investigate printing issues and work towards its resolution ?
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=297522.1
    Regards,
    Hussein

  • REP-1212

    Hi friends,
    I have a report APXINHIS.rdf which resides on our Linux Application Server. I want to revise it so I copy it
    to my Windows XP. Both reports builder versions are the same 6.0.8.28. At first I just want to check how the output
    looks as it is without revision, so I just recompile it and run. But I got error :
    REP-1212: Object 'Body' is not fully enclosed by its enclosing object
    Is there an automatic conversion made by the client report builder that changed the source code? It is really
    depressing and disappointing to see errors when you did not do anothing to it.
    Please help....
    Thanks a lot

    Hello Samantha,
    I have often said: "Oracle Reports is the biggest hinderance to my productivity.".
    With that being said, take a look at the report layout overall - use the <ctrl>- (control minus) to look at it from a "50,000 foot view". You should see where something has strayed outside the boundries of your page. Just squeeze them back in and this error should go away.
    Good luck,
    Don.
    You can reward this reply by marking it as either Helpful or Correct :)

  • Connection Object Delta Load not happening

    Hi Gurus,
                 I am doing integration between ISU and CRM 5.0. I have achieved integration both sides for BP , Contract Account. I have also done initial load for Connection Objects using object 'SI_CONNOBJ'. We are able to see IBase getting created for the Connection Objects but when I change the data in a particular Connection Object it is  not trigerring Delta Load for the Object.
                Please help me for the same.

    Hi Aishuman,,
    Please check for the following entry in R/3 table TBE31:
    EVENT    IBSSICON
    LAND
    APPLK    BC-MID
    FUNCT    ECRM_CONTRACT_COLLECT_DATA
    which brings the delta change to CRM.
    Also,in CRM txn:R3AC1,check for the filter setting for object SI_CONNOBJ.
    Also,in R/3 table CRMRFCPAR ,make sure that for object SI_CONNOBJ(or *) for consumser CRM(or *),value of DISCARDDAT is not set to X.If set to X,would prevent delta change to flow to CRM.
    Also,check for the queue registration in txn:SMQR.If your queue is de-registered or lock is set,then entry will not be processed in CRM.
    Hope this helps!
    Regards,
    Shanthala Kudva.

  • How can I create a object for a note?

    Hi experts,
        I need to apply the note 501905 but when I try in the SNOTE transacction I receive this error:
    Object REPS Z_MRM_DELETE_PP does not exist; create it
    Diagnosis
    The SAP Note that you want to implement contains changes to an object that does not yet exist in your system.
    SAP Notes contain only changes to objects that already exist. This means that the the system cannot automatically create new objects during the implementation of this SAP Note.
    Procedure
    1. Cancel the SAP Note implementationl.
    2. Create an empty object REPS Z_MRM_DELETE_PP with the corresponding object editor.
    3. Restart the SAP Note implementation.
    How can I create that Object??
    Thanks for the help!

    Hi Carlos,
    It says that you have to create a new program with a name Z_MRM_DELETE_PP.
    Once you create and activate the program you can execute the SAP Note.
    All this processure will be written in the SAP Note.
    Please Go through the Note using below:
    Step1: Use T.code SNOTE.
    Step2: Use menu GOTO --> NOTE BROWSER. Provide the Note no and EXECUTE.
    Step3: Double click on the displayed line.
    Here you will get the information to do before implementing the note.
    Go through all the documentation, and once you did all the development given in the note then you can implement the note.
    Regards,
    Sreekanth.

  • ORA-34492: Analytic workspace object __XML_GET_FULLTOAW_NAME does not exist

    Hi,
    We are experiencing the following error when trying to retrieve data from the OLAP layer in our front-end:
    ORA-34492: Analytic workspace object __XML_GET_FULLTOAW_NAME does not exist.
    to be more specific, the following happens:
    We are using the Oracle OLAP Java api's to query the analytical workspace. We create a Source object that contains the joins we want. This source is prepared and committed via the TransactionProvider class. Via the DataProvider we then create an SQLCursorManager and generate the SQL and execute it via JDBC.
    We were able to execute it without problems on an XP development platform. When switching to another platform that we use, it gives the following error messages:
    (platform with the error is Linux x86-64; more version info further down)
    Caused by: java.sql.SQLException: ORA-34492: Analytic workspace object __XML_GET_FULLTOAW_NAME does not exist.
    ORA-06512: at "SYS.OLAPIMPL_T", line 23
    ORA-06512: at "SYS.OLAPIMPL_T", line 17
    ORA-06512: at line 4
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:305)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:272)
    at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:626)
    at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:113)
    at oracle.jdbc.driver.T4CStatement.execute_for_describe(T4CStatement.java:352)
    at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:894)
    at oracle.jdbc.driver.T4CStatement.execute_maybe_describe(T4CStatement.java:384)
    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:984)
    at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1124)
    Platform/version info that produces the error:
    Linux x86-64
    Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
    PL/SQL Release 10.2.0.3.0 - Production
    CORE     10.2.0.3.0     Production
    TNS for Linux: Version 10.2.0.3.0 - Production
    NLSRTL Version 10.2.0.3.0 - Production
    OLAP A patch for 10.2.0.3 is applied.
    Platform where this works without problems:
    Windows XP
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
    PL/SQL Release 10.2.0.1.0 - Production
    CORE 10.2.0.1.0 Production
    TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - Production
    Any info on resolving this issue is greatly appreciated!
    Thanks,
    Ed

    Hi Keith,
    Yesterday I actually fully rebuilt/redeployed the AW. (I only patched our 10.2.0.3 installation with the OLAP A patch very recently.) Even the AW's tablespace was recreated, just to make sure everything was gone. Redeployment of the OLAP objects from OWB control center went without any problems.
    Let me answer your questions one by one below.
    1) How did you build the AW?
    We use OWB. The only thing I used AWM for is to actually create the AW. Once created, I use OWB to design and deploy. The front-end developers use AWM sometimes for viewing data in the OLAP objects. (I use OWB or AWM for that.)
    2) Can you connect to the AW via AWM, if so can you use the Data Viewer option to view:
    a) each dimension and check you can drill up and down.
    b) each cube
    I have been playing around a bit with the dim's and cubes in the AWM by right-clicking and selecting view data ... (that's the data viewer option?) and encountered no problems.
    3) You are using the OLAP API directly, what sort of application are you building - Java Client, JSP, Applet and are you using BI Beans?
    We are building a JSP type application, but so far only servlet code is being executed as the failure occurs on issuing the query. We are not using BI BEans.
    Thanks for your feedback!
    grts,
    Ed

  • Inboun IDOC status 52--Application document not fully posted

    Hi,
    In Inbound IDOC, the status code is 52 ---> Application document is not fully posted(satus of the inbound idoc is in yello colour). I want to reprocess this idoc in BD87 t.code in order to convert the yellow colour to green colour. Before reprocessing the IDOC, i need to rectify the problem and then reprocess the idoc in bd87. am i correct? if yes, what i need to do to solve the error --->application document not fully posted. Please guide me friends.
    Thanks in advance.
    Regards,
    Sri

    I am attaching how we documented the process in our troubleshooting guide.  Graphics were not pasted.
    21.3       Manually run IDOCs reported as 52.
    It is possible that IDOCs are found in status 52 for the daily updates.   In principle IDOCs 52 can not be re-proceeed, but there is a way to push the appropriate data from a source system, e.g. ERP.    Following is the process.
    21.3.1     You find IDOCs in status 52 in WE02.
    21.3.1     Open table EDIDS.
    Perform 2 searches for parameter STAPA2 and STAPA1 in status 52 and download the entries for each column to an MS Excel file.
    21.3.2     Adjust the MS Excel file.
    The strings STAPA2 and STAPA1 have to be truncated and separated into 3 different fields for processing:  First 2 characters are the Plan Number, next 2 the Object Type, and next 8 the Object Number.
    21.3.3     Manually process the entries via transaction PFAL from the source system, e.g. ERP.
    The entries must be processed in the following order sorting by Object Name:
    u2022     STAPA2s first, then STAPA1s.  
    u2022     Each organized by O, S, P, C, and CP.
    21.3.3.1     Running individually for each entry.
    By running PFAL with the individual entries:  Plan number, Object Type, Object Number,  Update mode,  Target Logical System name  ... the respective IDOC will be passed to target system for processing.
    21.3.3.2     If there are many entries for processing.
    If there are many STAPA2 and STAPA1 for processing.
    u2022     Create a text file like the one below with the entries as mentioned above.
    u2022     Logon into the source system and make sure CATTs are allowed..
    u2022     Via SCAT, create a CATT that emulates the execution of PFAL entering Plan number, Object Type, Object Number, Update mode,  Target Logical System name  ... the respective IDOCs will be passed to the target system for processing.
    . Create the text file with the entries.
    .  Execute the CATT ... the respective IDOCs will be passed to target system for processing.

  • LSMW Error - You have not fully maintained the descriptions

    Hi Experts,
    I was trying to Extend the materials to plant by using Direct input menthod where prog - RMDATIND.
    When I execute final step i.e "Start Direct Input Program" I faced with an error " You have not fully maintained the descriptions".
    I know this error with regards to Language Key and Description.
    I executed Display converted data under structure BMMH5, where Language key is blank.
    Kindly guide me why this language key is not captured, and also how to default the Language key as EN.
    Thanks nd Regards,
    Laxmi.........

    LSMW u2013 Legacy System Migration Workbench
    1.        Maintain object attributes
    2.        Maintain source structures
    3.        Maintain source fields
    4.        Maintain structure relations
    5.        Maintain field mapping and conversion rules
    6.        Maintain fixed values, translations, user-defined routines
    7.        Specify files
    8.        Assign files
    9.        Read data
    10.     Display read data
    11.     Convert data
    12.     Display converted data
    13.     Create batch input session
    14.     Run Batch Input session

  • In combobox 'g' is getting cut off, 'g' is not fully visible

    Hi Flex people,
    I am facing problem in combobox, I have the items : 'moon' , 'manager' , 'marketing' in the combobox.
    The text 'moon' is fully visible, but the in text 'manager' , 'g' is cut off, means character 'g' is not fully visible.
    Please give solution to how to make the 'g' to visible in  the selected item of combobox.
    Please find the attached snapshot, that will give clear idea.
    Thanks,
    Sushant

    Try this component:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:ComboBox xmlns:mx="http://www.adobe.com/2006/mxml" creationComplete="init();" updateComplete="adjustComboDropDownWidth();"
        buttonMode="true">
        <mx:Script>
        <![CDATA[
            import mx.controls.List;
             private var _selectedValue:String;
             private var _selectedLable:String;
             private var bSelectedValueSet:Boolean = false;
             private var bDataProviderSet:Boolean = false;
             [Bindable]
                private var myDropdownFactory:ClassFactory;   
             // Override committ, this may be called repeatedly
             override protected function commitProperties():void
                // invoke ComboBox version
                super.commitProperties();
                // If value set and have dataProvider
                if (bSelectedValueSet && bDataProviderSet)
                   // Set flag to false so code won't be called until selectedValue is set again
                   bSelectedValueSet=false;
                   // Loop through dataProvider
                   for (var i:int=0;i<this.dataProvider.length;i++)
                      // Get this item's data
                      var item:String = this.dataProvider[i].data;
                      // Check if is selectedValue
                      if(item == _selectedValue)
                         // Yes, set selectedIndex
                         this.selectedIndex = i;
                         break;
             // Trap dataProvider being set
             override public function set dataProvider(o:Object):void
                // invoke ComboBox version
                super.dataProvider = o;
                // This may get called before dataProvider is set, so make sure not null and has entries
                if (o!=null && o.length)
                   // Got it, set flag
                   bDataProviderSet = true;
             // set for selectedValue
             public function set selectedValue(s:String):void
                // Set flag
                bSelectedValueSet = true;
                // Save value
                _selectedValue = s;
                // Invalidate to force commit
                invalidateProperties();
              * @author       : Prashant Shelke.
              * @date         : 17/10/07
              * @method name : init()
              * @i/p params  : -
              * @return            : void
              * @description : To show tool-tip on line items objects of combobox.
              public function init():void
                    myDropdownFactory         = new ClassFactory(List);
                    myDropdownFactory.properties = {showDataTips:true, dataTipFunction:myDataTipFunction}
                    this.dropdownFactory    = myDropdownFactory;
                 private function myDataTipFunction(value:Object):String
                    return (value.label);
               * @author       : Prashant Shelke.
              * @date         : 17/10/07
              * @method name : adjustComboDropDownWidth()
              * @i/p params  : ComboBox
              * @return         : Number
              * @description : computes dropdown width according to what dataprovider provided to it.
              private function adjustComboDropDownWidth():void
                      this.dropdownWidth    = calculateCustomPreferredSizeFromData();                  
              * @author       : Prashant Shelke.
              * @date         : 16/10/07
              * @method name : calculateCustomPreferredSizeFromData()
              * @i/p params  : -
              * @return            : Number
              * @description : computes dropdown width according to what dataprovider provided to it.
              public function calculateCustomPreferredSizeFromData():Number
                    var dropDownWidth:Number    = this.calculatePreferredSizeFromData(this.dataProvider.length).width+14;
                    if(dropDownWidth > this.width)
                        return dropDownWidth;
                    else
                        return this.width;
          ]]>
       </mx:Script>
    </mx:ComboBox>

Maybe you are looking for