Rep-1352

Hi All !
I have developed a report in which i have used only Arial Narrow font. when I have changed the text of one margin label and run it again it gives error message like :-
REP-1352: The fonts specified for this report cannot be found for the character set specified by NLS_LANG.
then to remove this problem, I have changed NLS_LANG parameter(windows registry) to
1. NLS_LANG=American_America.AR8MSWIN1256
2. NLS_LANG=American_America.WE8ISO8859P1
but no one is work..Please give the solution
I am using windows/2000 and Oracle9iDS.
Regards,
Neeraj

Hi Neeraj,
There are couple of fixes went in 6.0.8.17.0 & 6.0.8.20.0. So apply the latest patch available in Metalink if it is 6i.
If you are using 9iAS/iDS, then please apply the 9.0.2.2 patchset. To download the patch goto Metalink <http://metalink.oracle.com/metalink/plsql/ml2_gui.startup> and search for Patch# 2842923.
This Patchset is for iAS and iDS.
Hope this helps.
Thanks,
Vinod.

Similar Messages

Error rep-1352

Problem :
REP-1352: The fonts specified for this report cannot be found for the character set specified by NLS_LANG.
Secene :
I am getting this runtime error after 3 years of usage only in a particular client. (This report works fine with other clients ).
Server Oracle8 Release 8.0.5.0.0 running on Win NT and reports version is 3.0.5.8.0
I have tried re-installing the client side and re-compiled the reports. There was no change in the report.
help is appricaited.

Check this post of Oracle related to font aliasing
http://download-east.oracle.com/docs/cd/B10464_05/bi.904/b13673/pbr_font.htm
Marcos

REP-1352 when running web reports in character mode on linux server

Hi
After migration from 6i to 10g we have problems when we run reports in character mode on a linux (Red Hat Enterprise 4) application server (10.1.2.0.2).
The error REP-1352 occurs with any NLS_LANG or report's font setup. Original report's font is Courier New (Occidental) and NLS_LANG=FRENCH_FRANCE.WE8ISO8859P1.
I created a new simple report in character mode with font Courier New and it is generated successfully.
Witch migration step could I apply to avoid this error ?
Thanks in advance.

I didn't precise that reports failed to be executed with desformat=delimited but succeded with desformat=pdf.
Why Reports server on linux is unable to generate a full text report but can generate a pdf report ?

Getting error REP-1352: The fonts specified for this report cannot be found

Dear Friends,
I'm getting the following error when I run my reports on Application Server installed in Solaris 9.
REP-1352: The fonts specified for this report cannot be found for the character set specified by NLS_LANG.
I searched internet and found the reason for the issue i.e., as follows.
REP-1352: The fonts specified for this report cannot be found for the character set specified by NLS_LANG.
Cause: The NLS_LANG environment variable specifies a character set for which no font is available.
Action: You may choose a font that exists in the character set specified by NLS_LANG. Alternatively, you may use the Font Alias file to force an available font to be used instead of the one specified in the report.
I cannot change the font for each & every report as there are more than 100 reports. HOW CAN I USE THE FONT ALIAS FILE? It is very Urgent, please solve my problem.
Please help me ASAP.
Thanking you.
With Kind Regards,
Senthil Alagu .P.

Check this post of Oracle related to font aliasing
http://download-east.oracle.com/docs/cd/B10464_05/bi.904/b13673/pbr_font.htm
Marcos

REP-1352: The fonts specified for this report cannot be found for the char

We have migrated all our character reports to oracle 10g - sun solaris machines.
Now, these reports give us an error....
REP-1352: The fonts specified for this report cannot be found for the character set specified by NLS_LANG
Does anyone have suggestions.
desformat - DELIMITED
mode - character
Thanks

Hi,
Did you check this DocId:203781.1. I think it will help you problem.
Moreover does your X-server or vnc server on HP work fine.
In the past with HP version 11.0 there was always problem with HP x-server. just check that your x-server is runinig will ex. x-clock.
Cheers,
Hamdy

REP-1352 while editing the margins

hi,
I am using Reports 6i and developed a report and it's running ok.
When I tried to increase the margins, it is giving the following error.
REP-1352 The font specified for this report can not be found for the character set specified by NLS_LANG
I installed patch10. What could be the problem.
Please help
Murthy
Sometimes I get this error when I adjust the margins

Murthy,
Please apply patch 12 and try , your issue would get solved mostly
Thanks
The Oracle Reports team

Garbage displayed while running the report in browser using report server

We are facing problem in displaying the Arabic text from the Report Server.
We have Digital Server running Tru64 4.0f unix. We have two similiar servers, both are
clustered. We have Report Server(6i) running in one machine and the Database(8.1.7) running
in the other.
When we tried the reports having only English text it is working fine. We need Arabic text
also in the report. The Arabic text are coming as ?????? . We tried setting the NLS_LANG
environment to AMERICAN_AMERICA.AR8MSWIN1256 and changed the Tk2Motif.rgb to take this
character set. Then we get the error REP 1352 - The font is not supported by the NLS_LANG.
Then we tried the various NLS_LANG environment AMERICAN_AMERICA.AR8ISO8859P6, ARABIC_SAUDI
ARABIA.AR8MSWIN1256 and ARABIC_SAUDI ARABIA.AR8ISO8859P6, in all the cases the report is
just hanging. If We unset the NLS_LANG and the Tk2Motif.rgb the english part of the reports
are coming alright, still the arabic is coming ??????.
null

hello,
where does it display the ???????s. it seems that the client, you are using to display the output does not have the right font-sets installed.
regards,
the oracle reports team

Report Layout modification problem

Hi!!! Friends,
I have developed a report in Report 6i on version 6.0.8.11.3 and tried to open and modify it on version 6.0.8.18.3. In that case if I move the edit margin of the report a bit then after running the report I am getting the following error
Error :-
REP - 1352 The fonts specified for this report cannot be found for the character set specified by NLS_LANG.
Could any one help me to get rid of this problem?
Thanks in advance.
Regards,
Sanjeev

Pls try this (Assuming this is Solaris OS)
Cause may be that NLS_LANG might not be matching with the entry in Tk2Motif.rgb (Pls search for this file in $OH)
Change Tk2Motif*fontMapCs entry to reflect correct character set.
If NLS_LANG is WE8ISO8859P15, then the entry
should be:
Tk2Motif*fontMapCs: iso8859-15=WE8ISO8859P15
Thanks
Ratheesh

Output to line printer (132 x 66)

I need to print statement to a Line Printer (such as Epson LQ-1600K) on preprinted form.
Should I use character mode?
I've tried to setup a character mode report as described in
Daily BI Views
(except output chr(14) to printer)
The layout of printout is as follows
- 132C x 66R
- 14 7/8 x 11 inches (paper)
However, the layout scale is 124 x 52. I can place more than 132 characters on each line. And, my printer definition file is as follows:
--- starts ----
printer "dflt"
height 66
width 132
after page control(L)
return control(M)
linefeed control(J)
---- ends ----
Is there anything I missed? Please help! Thanks!

And, error message "REP-1352: The fonts specified for this report cannot be found
for the character set specified by NLS_LANG" was prompted. The fonts will be automatically set to "r_control" other than "courier new".
report font : courier new
NLS_LANG : AMERICAN_AMERICA.US7ASCII
Please help.

Pasta configuration

Hi all ,
I am creating a clone for our production system to the test . After all the post cloining steps I am getting the below error while runinig any pdf report while text reports are ok:
===========================================================
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AR8MSWIN1256
Pasta: error: Error reading config file
REP-1352: The fonts specified for this report cannot be found for the character set specified by NLS_LANG.
============================================================
to diagnose the problem I tryied to check the $FND_TOP/resource/pasta.cfg file .
All seems OK to me .
The fonts are in the correct location . ie
============================
displayfontpath=<FND_TOP>/<APPLRSC>/ADUO.ttf
displayfontpath=<FND_TOP>/<APPLRSC>/LBANWTJ.ttf
displayfontpath=<FND_TOP>/<APPLRSC>/ADUOJ.ttf
displayfontpath=<FND_TOP>/<APPLRSC>/ALBANWTK.ttf
displayfontpath=<FND_TOP>/<APPLRSC>/ADUOK.ttf
displayfontpath=<FND_TOP>/<APPLRSC>/ALBANWTS.ttf
==============================
The file is an exact copy from production and all is working in production
The Display is set to the test and is working fine .
can anyone help please

Hi;
Please check below and see its helpful for your issue:
REP-1352 Running a Web Report using AR8MSWIN125 character set [ID 176675.1]
How to use Arabic Windows Character Set AR8MSIWN1256 with UNIX and Motif [ID 207948.1]
After Applying Changes in Oracle Reports Configuration Files, Unexpected Errors Are Generated (Config Files Become Corrupted) [ID 604664.1]
Set up the Report Server to use new AFM files but still getting Rep-1352 [ID 334873.1]
Regard
Helios

Reports errror

Hi,
Our reports are erroring out with the following error:
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AR8ISO8859P6
Pasta: error: Error reading config file
REP-1352: The fonts specified for this report cannot be found for the character set specified by NLS_LANG.
Please suggest
Regards
Bilal

Hi,
Please see the suggested solutions in these docs.
Set up the Report Server to use new AFM files but still getting Rep-1352 [ID 334873.1]
How to use Arabic Windows Character Set AR8MSIWN1256 with UNIX and Motif [ID 207948.1]
Thanks,
Hussein

Invoices Payables Open Interface Import Error REP-1419: 'beforereport': PL/

I am having the following error when I try to import the invoces from the interface tables. I've search for the problem but and tried various solutions but they did not solve the problem or did not apply.
Can someone help??
APXIIMPT module: Payables Open Interface Import
Current system time is 22-SEP-2006 22:31:13
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_source='CI'
p_batch_name='INITIAL'
p_purge_flag='N'
p_trace_switch='N'
p_debug_switch='N'
p_summary_flag='N'
p_commit_batch_size='1000'
p_user_id='1115'
p_login_id='337907'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.WE8ISO8859P1
MSG-01104: (Before Report) Modified file
MSG-00000: p_purge_flag :N
MSG-00000: c_nls_yes :Yes
MSG-00000: c_nls_no :No
MSG-00000: p_summary_flag :N
MSG-00000: p_nls_summary :No
MSG-00000: p_nls_purge :No
REP-1419: 'beforereport': PL/SQL program aborted.
Report Builder: Release 6.0.8.25.0 - Production on Fri Sep 22 22:31:14 2006
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 577860.
Review your concurrent request log and/or report output file for more detailed information.

I get the following error message: "Invalid Liability Liability account is invalid". I've tried both populating the ACCTS_PAY_CODE_COMBINATION_ID field and leaving it null. Some googling also said mentioned that particular error message may be misleading.
And yes, I'm passing the correct code from the lookup_type. The only difference is that for the one that works, I'm using an Oracle seeded source lookup. However, in the lookups screen I can't see where there are any special configuration.
I should also mention that the invoices will be imported from an external system, and there will be no PO attached to the invoice. I'm not sure if this info is relevent though.
I've done some researching and thinking and maybe there is some kind of profile option I need to set but I haven't been able to find it yet.
Also, I can't find the AP_ERRORS_GT table or any other closely named ones.
Edited by: Sean Ong on 15/08/2012 01:27

Rep-1401: formula name : Fatal Pl/SQL error occured

Hi,
I am using report builder 6.0 and recently came across a error while running the report. Rep-1401:<formula name> : Fatal Pl/SQL error occured.
I created a formula column in the report. In that i have three local variable.
f_val number := 0;
s_val number := 0;
t_val number := 0;
t_val := f_val/s_val ; --> this gives the above fatal error.
t_val := (f_val + 1)/s_val; --> this gives the above fatal error
t_val := f_val/(s_val + 1); ---> no error
if i change the value of s_val
s_val := 1;
t_val := f_val/(s_val - 1) ; ----> this gives the above fatal error.
Can anyone help me to solve this problem or is it report builder bug.
Please help me, as i desperately need help.
Thanks

Thanks for ur reply.
I used nvl too, but the same error occurred.
For the information in my question I by mistake typed
t_val := (f_val + 1)/s_val; --> this gives the above fatal error.
but when the value of f_val = zero and s_val is zero why it gives fatal error when i divide, i used nvl on both the variable while dividing but still got the same error.
but if s_val is greater than zero then no error occurs.
please help me, I feel it is a bug.

Rep-1401 : Fatal PL/SQL error occured

Hi,
I am using report builder 6.0 and recently came across a error while running the report. Rep-1401:<formula name> : Fatal Pl/SQL error occured.
I created a formula column in the report. In that i have three local variable.
f_val number := 0;
s_val number := 0;
t_val number := 0;
t_val := f_val/s_val ; --> this gives the above fatal error.
t_val := (f_val + 1)/s_val; --> this gives the above fatal error
t_val := f_val/(s_val + 1); ---> no error
if i change the value of s_val
s_val := 1;
t_val := f_val/(s_val - 1) ; ----> this gives the above fatal error.
Can anyone help me to solve this problem or is it report builder bug.
Please help me, as i desperately need help.
Thanks

The best way to handle this is to just add an exception handler that handles a zero divide.
EX:
function...blah
var3:=var/var2...
EXCEPTION
when zero_divide then
var3:= 0;Zero Divide is a built-in exception to handle cases just like this - so if you run into it, you can set it to whatever you want

REP-56055 exceedign maxconnections

Hi ,
i m getting error REP 56055 while running a report form a in a browser output format pdf
I searched on many forums and i have made the changes like
1. repserver.conf : maxconnect :3000 idletimeout :40
2. reports/dtd/rwserver.conf : EngineResponsetimeout :5
i restarted the reports services after that but still the REP 56055 is coming
pls help me for the solution

The change is not to be made in DTD (rwserverconf.dtd).
It has to be made in $OH/reports/conf/server_name.conf
Thanks
Ratheesh
[    All Docs     ]
http://otn.oracle.com/documentation/reports.html
[     Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[   Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[   Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
---------------------------------------------------------------------------------

Rep-1352

Similar Messages

Maybe you are looking for