REP-1401, FATAL PL/SQL ERROR ....
HI,
I am trying to open a text file in oracle reports in one of the fomula column and it gives me the REP-1401 error. The syntax is as below. Is there any idea why its behaving so ? "UPC_Folder" and "UPCFile" are the two user parameters, that I am passing correctly. I mean valid folder and file name. But still I am getting error. Please help
function CF_1Formula return Char is
Upc_File Text_Io.File_Type;
UpcFiles Varchar2(500);
Begin
UPCFILES := CHR(39)||:UPC_Folder||'\'||:UpcFile||CHR(39);
Upc_File := TEXT_IO.FOPEN(UPCFILES,'R');
return('Done');
End;
Hi Feroz,
A typical problem is that you are opening the file multiple times without closing it. If your formula is executed multiple times, then the second FOPEN without a FCLOSE will cause this error. This would happen if your formula is inside a query group. If you add some logic to only open the file once, or else if you close it each time it is called (not very efficient, but it works), then the error should go away.
regards,
Stewart
Similar Messages
-
REP-1401: Fatal PL/SQL error occurred. ORA-01403: no data found
Hi guys,
I am getting error 'REP-1401: Fatal PL/SQL error occurred. ORA-01403: no data found ' when run the report
and i m also use formula column in my report.
can any body help me why it's coming.
following code is used in formula column plz check and verify:
function CF_3Formula return Char is
T1 VARCHAR2(100);
begin
SELECT
VAT_REG_NO INTO T1
FROM
JA_IN_HR_ORGANIZATION_UNITS JIHOU,
HR_LOCATIONS HL--,
--MTL_TXN_REQUEST_HEADERS MTLH
WHERE
JIHOU.ORGANIZATION_ID=HL.INVENTORY_ORGANIZATION_ID AND
JIHOU.LOCATION_ID=HL.LOCATION_ID AND
--Jihou.ORGANIZATION_ID = Mtlh.Organization_Id AND
-- Hl.INVENTORY_ORGANIZATION_ID =Mtlh.Organization_Id AND
-- MTLH.ATTRIBUTE10=SUBSTR(HL.LOCATION_CODE,1,3) AND
SUBSTR(HL.LOCATION_CODE,1,3)= :TO_ORG1 ;
RETURN (T1);
end;
plz help me out.Hi;
What is EBS version? Is it custom report or not?
See below which is mention similar errors
Autoinvoice Error: ORA-1403: no data found [ID 1209403.1]
APXIIMPT - Payable Open Interface Import Fails on "REP-1401: 'cf_source_nameformula': Fatal PL/SQL error occurred. ORA-01403: no data found" [ID 222058.1]
Regard
Helios -
Iam getting the error REP-1401: '': Fatal PL/SQL error occurred. when i
When i run the report to generate xml file in report builder the following error messages are displayed.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1401: '': Fatal PL/SQL error occurred.
pls help me.Its urgent
Regards,
KranthiHi;
What is EBS version? Is it custom report or not?
See below which is mention similar errors
Autoinvoice Error: ORA-1403: no data found [ID 1209403.1]
APXIIMPT - Payable Open Interface Import Fails on "REP-1401: 'cf_source_nameformula': Fatal PL/SQL error occurred. ORA-01403: no data found" [ID 222058.1]
Regard
Helios -
REP-1401 Fatal PL/SQL error occur ORA-06502 numeric or value error
Hi,
I am getting following error in reports 6i
REP-1401 Fatal PL/SQL error occur ORA-06502 numeric or value error.
I have added a formula column based on other formula column
function CF_1FORMULA0005 return varchar2 is
CF_CREDIT varchar2(38);
begin
:CF_CREDIT:= :D_CARRY_F_CR+:D_HD_SUM_REP_CR;
RETURN (:CF_CREDIT);
end;
Oracle Standard formula coulmn:
function D_CARRY_F_DRFormula return VARCHAR2 is
l_dr VARCHAR2(38);
l_dr_disp VARCHAR2(38);
begin
SRW.REFERENCE(:C_FUNC_CURRENCY);
SRW.REFERENCE(:C_CARRY_F_DR);
if (:C_CARRY_F_DR = 0) THEN
ax_globe_package.g_dr_cf := TRUE;
--l_dr:= '0.00';
l_dr_disp := '0.00';
l_dr := ax_currency_pkg.display_char(:C_FUNC_CURRENCY,l_dr_disp,38);
else
-- return(ax_currency_pkg.display_char(:C_FUNC_CURRENCY,:C_CARRY_F_DR,ax_page_pkg.f_maxlength));
-- Bug2239881. Setting the carried forward totals.
IF (:P_GLOBAL_ATTR_CAT = 'JE.GR.GLXSTBKS.BOOKS' AND ax_globe_package.g_dr_cf = FALSE) THEN
ax_globe_package.g_dr_cf := TRUE;
ax_globe_package.g_dr_total := :C_CARRY_F_DR;
END IF;
srw.message(999,'G_DR_TOTAL = ' || ax_globe_package.g_dr_total );
l_dr := ax_currency_pkg.display_char(:C_FUNC_CURRENCY,to_char(ax_globe_package.g_dr_total),38);
/*select to_number(l_dr, '999G999G999G999G990D00')
into l_dr_disp
from dual;
end if;
srw.message(999,'l_dr = ' || l_dr );
return l_dr;
--return ltrim(to_char(l_dr_disp,'999G999G999G999G990D00','nls_numeric_characters=,.'));
end;
both formula column return types are character.Please help me ASAP.
Thanks,
sriharsha.Hi,
First of all: when you should use concatenation operator (||) instead of plus sign when working with strings. So, instead of
:CF_CREDIT:= :D_CARRY_F_CR+:D_HD_SUM_REP_CR; you should use
:CF_CREDIT:= :D_CARRY_F_CR||:D_HD_SUM_REP_CR; If :D_CARRY_F_CR and :D_HD_SUM_REP_CR are both numbers then consider to use to_char function before you assign value to :CF_CREDIT.
I wonder, why your CF's returns varchar's if they operates on numbers?
regards
kikolus
Edited by: kikolus on 2012-11-30 08:03 -
Rep-1401 : Fatal PL/SQL error occured
Hi,
I am using report builder 6.0 and recently came across a error while running the report. Rep-1401:<formula name> : Fatal Pl/SQL error occured.
I created a formula column in the report. In that i have three local variable.
f_val number := 0;
s_val number := 0;
t_val number := 0;
t_val := f_val/s_val ; --> this gives the above fatal error.
t_val := (f_val + 1)/s_val; --> this gives the above fatal error
t_val := f_val/(s_val + 1); ---> no error
if i change the value of s_val
s_val := 1;
t_val := f_val/(s_val - 1) ; ----> this gives the above fatal error.
Can anyone help me to solve this problem or is it report builder bug.
Please help me, as i desperately need help.
ThanksThe best way to handle this is to just add an exception handler that handles a zero divide.
EX:
function...blah
var3:=var/var2...
EXCEPTION
when zero_divide then
var3:= 0;Zero Divide is a built-in exception to handle cases just like this - so if you run into it, you can set it to whatever you want -
REP -1401 Fatal PL/SQL error occurred.
Hi All,
In my rdf report i have a formula column with the following code in it..
function CF_PO_NumberFormula return Char is
cursor cur_pending_po
is
select distinct pll.po_header_id
from
PO_LINE_LOCATIONS_ALL pll,
po_lines_all pla
where 1=1
and pll.po_line_id=pla.po_line_id
and pll.org_id=pla.org_id
and pll.org_id=5050
and pla.item_id=:inventory_item_id
and (pll.quantity-pll.quantity_received)>0
AND EXISTS(SELECT 1 FROM PO_HEADERS_ALL PHA
WHERE PLL.PO_HEADER_ID=PHA.PO_HEADER_ID
AND PHA.APPROVED_FLAG='Y'
AND PHA.CLOSED_CODE IS NULL)
order by pll.po_header_id;
po_num varchar2(4000);
begin
po_num:=null;
for rec_cur_pending_po in cur_pending_po
loop
select segment1||','||po_num into po_num
from
po_headers_all
where 1=1
and po_header_id=rec_cur_pending_po.po_header_id;
end loop;
return rtrim(po_num,',');
exception
when others then
po_num :=null ;
return po_num;
end;
when i am running the report, it is getting errored out..following is the log file message...
Arguments
P_ORGANIZATION_ID='5100'
P_FROM_DATE='2009/08/31 13:30:00'
P_TO_DATE='2009/09/02 13:30:00'
APPLLCSP Environment Variable set to :
XML_REPORTS_XENVIRONMENT is :
/app/oapps/11.5.5/opm7ora2/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to: /app/oapps/11.5.5/opm7ora2/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
AMERICAN_AMERICA.UTF8
REP-1401: 'cf_po_numberformula': Fatal PL/SQL error occurred.
Report Builder: Release 6.0.8.27.0 - Production on Thu Sep 10 11:38:18 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 25343374.
Review your concurrent request log and/or report output file for more detailed information.
Can Anyone help me on this..I would suggest the best place to start is with some diagnostics - first of all in the exception handler. Try
SRW.MESSAGE(999,'PO number formula failed - '||sqlerrm);
This will give you more information as to the exact error which occurred.
Also, I hope you have tested the query separately before putting it in the report! - may be an obvious one, but it is possible that you may have a data size problem on the po_num variable. Do you know how many rows the cursor will return?
This should give you somewhere to start.
Edited by: mike_p on Sep 11, 2009 2:09 PM
Edited by: mike_p on Sep 11, 2009 2:10 PM -
REP-1401: FATAL PL/SQL ERROR OCCUARED
I make below in function in report builder,give me fatal pl/sql error
i can`t handle it please any tips
function CF_PERF_COMENTFormula return Number is
V_VALUE_COMMENT_EMP VARCHAR2(2000);
V_VALUE_PERF_ID_EMP NUMBER(15);
V_VALUE_PERF_NAME_EMP VARCHAR2(80);
V_VALUE_COMMENT VARCHAR2(2000);
V_VALUE_PERF_ID NUMBER(15);
V_VALUE_PERF_NAME VARCHAR2(80);
begin
V_VALUE_COMMENT_EMP := 'N/A';
V_VALUE_PERF_ID_EMP := 1001;
V_VALUE_PERF_NAME_EMP := 'N/A';
V_VALUE_COMMENT := 'N/A';
V_VALUE_PERF_ID := 2002;
V_VALUE_PERF_NAME := 'N/A';
IF :PERSON_ID_C = :OWNING_PERSON THEN
SELECT pp1.comments,
pp1.performance_level_id
INTO
V_VALUE_COMMENT_EMP,
V_VALUE_PERF_ID_EMP
FROM per_performance_ratings pp1, per_objectives po
WHERE po.objective_id = :objective_id
AND pp1.objective_id = po.objective_id
AND PP1.PERSON_ID = :PERSON_ID_C
AND pp1.person_id != -1;
SELECT NVL(NAME,'N/A')
INTO
V_VALUE_PERF_NAME_EMP
FROM PER_RATING_LEVELS
WHERE
RATING_LEVEL_ID = V_VALUE_PERF_ID_EMP;
:CP_VALUE_COMMENT_EMP := V_VALUE_COMMENT_EMP;
:CP_VALUE_PERF_NAME_EMP := V_VALUE_PERF_NAME_EMP;
ELSE
SELECT NVL(pp1.comments,'N/A'),
NVL(pp1.performance_level_id,'1002')
INTO
V_VALUE_COMMENT,
V_VALUE_PERF_ID
FROM per_performance_ratings pp1, per_objectives po
WHERE po.objective_id = :objective_id
AND pp1.objective_id = po.objective_id
AND PP1.PERSON_ID != :PERSON_ID_C
AND pp1.person_id != -1;
SELECT NVL(NAME,'N/A')
INTO
V_VALUE_PERF_NAME
FROM PER_RATING_LEVELS
WHERE
RATING_LEVEL_ID = V_VALUE_PERF_ID;
:CP_VALUE_COMMENT := V_VALUE_COMMENT;
:CP_VALUE_PERF_NAME := V_VALUE_PERF_NAME;
END IF;
RETURN 0;
end;Did you try whatever i suggested? What happened? Because sometimes it is behaving like this in my report builder then i just close the report builder and reopening it. It will work.
-
Rep: Fatal pl/sql error Occured
Hi All
I have created one formula display chassis number based on Process(line_code).
When compile time its no error , but if i have pass parameter running time its generate the report error
Rep-0069: Internal error
Rep-57054 : In-Process job terminate
Rep-1401 : " Fatal Pl/SQL error occurred.
Below i have posted my Formula column what i written
function CF_Chassis_numFormula return varChar2 is
l_chassis_num varchar2(300);
begin
if :line_code like 'CHASSIS%' then
select chassis_num into l_chassis_num from xxtc_chassis_dtls_v where CHS_SCH_NUM = :schedule_number;
elsif :line_code like 'SPOT%' then
BEgin
select chassis_num into l_chassis_num from xxtc_chassis_dtls_v where to_char(SPT_SCH_NUM) = to_char(:schedule_number);
Exception
when others then
Return null;
end;
elsif :line_code like 'METAL%' then
select chassis_num into l_chassis_num from xxtc_chassis_dtls_v where MTL_SCH_NUM = :schedule_number;
elsif :line_code like 'TRIM%' then
select chassis_num into l_chassis_num from xxtc_chassis_dtls_v where TRM_SCH_NUM = :schedule_number;
elsif :line_code like 'PAINT%' then
select chassis_num into l_chassis_num from xxtc_chassis_dtls_v where PNT_SCH_NUM = to_char(:schedule_number);
elsif :line_code like 'FREC%' then
select chassis_num into l_chassis_num from xxtc_chassis_dtls_v where FREC_SCH_NUM = :schedule_number;
elsif :line_code like 'N100%' then
select chassis_num into l_chassis_num from xxtc_chassis_dtls_v where N101_SCH_NUM = :schedule_number;
elsif :line_code like 'PDIC%' then
Begin
select chassis_num into l_chassis_num from xxtc_chassis_dtls_v where to_char(PDIC_SCH_NUM) = to_char(:schedule_number);
Exception
when others then
Return null;
end;
else
l_chassis_num :='';
end if;
return l_chassis_num;
end;
Can please help to fix that bug
Regards
Sanjay
Edited by: 993525 on May 30, 2013 9:32 AMPlease post the details of the application release, database version and OS.
Please enable trace/debug and see if you get more details about the error.
Thanks,
Hussein -
Rep-1401: formula name : Fatal Pl/SQL error occured
Hi,
I am using report builder 6.0 and recently came across a error while running the report. Rep-1401:<formula name> : Fatal Pl/SQL error occured.
I created a formula column in the report. In that i have three local variable.
f_val number := 0;
s_val number := 0;
t_val number := 0;
t_val := f_val/s_val ; --> this gives the above fatal error.
t_val := (f_val + 1)/s_val; --> this gives the above fatal error
t_val := f_val/(s_val + 1); ---> no error
if i change the value of s_val
s_val := 1;
t_val := f_val/(s_val - 1) ; ----> this gives the above fatal error.
Can anyone help me to solve this problem or is it report builder bug.
Please help me, as i desperately need help.
ThanksThanks for ur reply.
I used nvl too, but the same error occurred.
For the information in my question I by mistake typed
t_val := (f_val + 1)/s_val; --> this gives the above fatal error.
but when the value of f_val = zero and s_val is zero why it gives fatal error when i divide, i used nvl on both the variable while dividing but still got the same error.
but if s_val is greater than zero then no error occurs.
please help me, I feel it is a bug. -
hi,
my report is giving error REP-1401:'cf_1formula': Fatal PL/SQL error occured,
ORA-01403: no data found
There are two table emp1 and emp2 created from employees table from HR schema
I have deleted some records from table emp2 where department id is 110
main query is
select employee_id, first_name, department_id from emp1
now i created a foumula column
function CF_1Formula return Number is
dept number;
begin
select department_id into dept from emp2 where employee_id = :employee_id;
return(dept);
end;
the above error is given when report is run. i tried
exception
when_no_data_found then
dept:=000
but problem is not solved
i want to disply any number in this foumula column if the record is not foundM. Khurram Khurshid wrote:
exception
when_no_data_found then
dept:=000try this code in formula
function CF_1Formula return Number is
dept number;
begin
select department_id into dept from emp2 where employee_id = :employee_id;
if dept is not null then
return(dept);
else
return 0;
end if;
end; Hope this will help you...
If someone response is helpful or correct please, mark is accordingly. -
REP-1401 'beforereport' Fatal PL/SQL error occurred. ORA 00000 normal.
Hi,
I am running the report Journals - General (132 char)- file name GLRGNJ.rdf from
Oracle Report Builder 6.0.8.11.3.
I have commented all the (srw.user_exit) in the Before Report trigger but i still
get the message:
REP-1401 'beforereport' Fatal PL/SQL error occurred. ORA 00000 normal,
successful completion.
Can anyone suggest a solution please?
Thanks,
FarisDear sir, i am created one formula column in Reports6i and the following error has come. Could u please find out a solution. Thanks in advance.
my function is below
function CF_Branch_NameFormula return Char is
lc_branch_name varchar2(100);
begin
SELECT rtrim(substr(FVT.DESCRIPTION
,instr(FVT.DESCRIPTION,'-',1)+1
,100)) INTO lc_branch_name
FROM FND_FLEX_VALUES FFV, FND_FLEX_VALUES_TL FVT
WHERE FFV.flex_value_Set_id = 1007956
AND FFV.FLEX_VALUE_ID = FVT.FLEX_VALUE_ID
AND FFV.FLEX_VALUE = FVT.FLEX_VALUE_MEANING
AND FVT.DESCRIPTION <> 'xxx'
and rownum<=1
AND SUBSTR(FVT.FLEX_VALUE_MEANING,3,2) = :P_BRANCH;
return (lc_branch_name);
end; -
Hi Team,
I am running one conc programme.
After running I am getting below error. I checked the issue on metalink and other, seems that it is an size related issue. I have increased the size of formula columns and placeholdder too.
But still getting issue.
My requirement is to get comma seperated values using SQL query itself. Neither i wanted to create layout of the report , since it is a XML publisher report and nor I am including it on RTF template.
I want the CF_10 formula column to be populated with comma seperated values.
MSG-00187: From Date 01-Sep-2014
REP-1401: 'cf_10formula': Fatal PL/SQL error occurred.
ORA-06502: PL/SQL: numeric or value error
And Here is my code for CF_10
function CF_10Formula return Number is
begin
SELECT NVL(TO_CHAR(sum(Amount),'99,99,99,999'),0) into :CP_5 --NVL(ROUND(sum(Amount)),0) into :CP_5
-- xxhw_Coll_cat(category) "Intercat Catg"
FROM hhxw_Region_col_v
WHERE Category IN ('Intercompany - CATV')
AND trunc(gl_date) BETWEEN TO_DATE(:P_FROM_DATE, 'DD/MM/RRRR') AND TO_DATE(:P_TO_DATE, 'DD/MM/RRRR');
RETURN ROUND(:CP_5);
end;
Anyone please suggest me.
Regards,
SachinHi,
1)Why are you selecting the value into a report item? Select into a local variable and return that
RETURN :CP_5 --> This one!!
2)And you should avoid applying functions to DB columns in where clauses wherever possible, so oracle can use indexes on them if applicable:
AND gl_date >= To_date(:P_FROM_DATE, 'DD/MM/RRRR')
AND gl_date < To_date( :P_TO_DATE, 'DD/MM/RRRR') + 1;
I think you are taking 2 column in the Layout CF_10 and CP_5 right? if so, then use below Query.
FUNCTION cf_10formula
RETURN NUMBER
IS
v_amount NUMBER:null;
IS
BEGIN
BEGIN
SELECT nvl(round(SUM(amount)), 0)
INTO v_amount --> Retruns the value for CF_10 column
FROM hhxw_region_col_v
WHERE category IN ( 'Intercompany - CATV' )
AND gl_date >= to_date(:P_FROM_DATE, 'DD/MM/RRRR')
AND gl_date < to_date( :P_TO_DATE, 'DD/MM/RRRR') + 1;
:CP_5 := nvl(trunc(v_amount),0); --> Retruns the value for CP_5 column
EXCEPTION
WHEN OTHERS THEN
v_amount := 0;
srw.message(1003,'Error in Getting :' ||p_from_date);
END;
END;
And
If you've got a number function returning into a number field then all you should need to do to make the comma appear is to change the number format mask in field.
From 40000 to 40,000 -
Hi everyone.
Can anyone tell me what is wrong in this code below?
Code:
function NO_DAYSFormula return Number is
begin
IF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
AND :P_TO_DT<:MATURITY_DATE
AND :ACCT_OPN_DT>:P_FR_DT
THEN RETURN (:P_TO_DT-:ACCT_OPN_DT+1);
ELSIF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
AND :P_TO_DT<:MATURITY_DATE
AND :ACCT_OPN_DT<:P_FR_DT
THEN RETURN (:P_FR_DT-:P_TO_DT+1);
ELSIF TO_CHAR(TO_DATE(:P_FR_DT, 'DD-MM-RRRR'), 'RRRR') =TO_CHAR(TO_DATE(:ACCT_OPN_DT, 'DD-MM-RRRR'), 'RRRR')
AND :P_TO_DT>:MATURITY_DATE
AND :ACCT_OPN_DT<:P_FR_DT
THEN RETURN (:P_FR_DT-:MATURITY_DATE+1);
END IF;
END;
It gets compiled successfully but when i run the report, i get 2 errors.
Error 1:
REP-1401: 'no_daysformula':Fatal PL/SQL error occurred.
ora-06503: PL/SQL : Function returned without value.
Error 2:
REP-0619: You cannot run without a layout.
Should i use only 1 return statement?
Can i use as many return statements as i want?
What is the exact mistake? Please let me know.
Thank You.Let me clear you the first thing...
If you get any fatal errors while running the report (e.g., function returned without value,no value etc.,) the report will show
REP-0619: You cannot run without a layout.
So you just correct the function 'no_daysformula' .
First of all you run the report without that formula column.
If it works fine then , Check the return value of your formula column (Your formula column properties --> Return value --> value (It will be DATE as i think so).
As function will always return a single value, Check your formula 'no_daysformula' returns the same.
declare a return variable say for example..
DECLARE
V_DATE DATE;
BEGIN
--YOUR CODE---
RETURN V_DATE := (RETURN VALUE)
END;
Last but not least ... use Else condition to return (NULL or any value ) in your code and check..
If any Problem persists let me know
Regards,
Soofi. -
Rep 1401"desc_thik_widformula" fatal pl/sql error
Hi,
This problem in a currently using report.
the error is:- ' rep 1401"desc_thik_widformula" fatal pl/sql error'
This error occurs when only selecting one of the parameters - name:- :Sub_inventory , Value :- 'Tube Lines'
Last 31st July 2010 it worked fine. Now Having Problem .
When I put any other value to this parameter the report is working fine.
Function def: given Below
function Desc_Thik_widFormula return Char is
x varchar(20);
t varchar(20);
begin
select description into x from xxmmi_item_thickness_v where flex_value = :thick;
return x ;
end;
Please Suggest possible reasons for the problem here?
Thanks in advance.Hi Naseer,
This error occurs when only selecting one of the parameters - name:- :Sub_inventory , Value :- 'Tube Lines'Try executing the below SQL Select statement using the above values from SQL Plus.
select description from xxmmi_item_thickness_v where flex_value = :thick;Check out the value for description, most probably it should be of length more then 20 characters.
Also do check the size for the "Desc_Thik_wid" formula column.
Set the size of the formula column or x variable or both as required.
It's good practice to define variables as follows in PL/SQL:
variable_name table_name.column_name%type; In your case
x xxmmi_item_thickness_v.description%type; Hope this helps.
Best Regards -
REP-1401: 'cf_1formula': Fatal PL/SQL error occurred.
Hi all,
I am using the barcodes example which is on otn.
I am getting the result on the development side which is my local set-up. (windows-2000) and i am using Report Builder 9.0.4.0.21.
I am able to see the barcode.
If i try the same thing on my deployment side which on my AS(Application server) which on UNIX platform .
I am getting the below error....
REP-1401: 'CF_1FORMULA0031': Fatal PL/SQL error occurred.
ORA-39565: Message 39565 not found; product=RDBMS; facility=ORA
I had gone thru metalinks and i found few docks saying change of width of file_name
I am enclosing the details
the below is the change i did in rep_<server>.conf
<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="1" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="60000" classPath="$ORACLE_HOME/reports/jlib/oraclebarcode.jar">
and i had made an entry in reports.sh as mentioned in one of the docs in metalinks.
and i had changed the width of
myfilename varchar2(20);
to
myfilename varchar2(256);
and CF_1 width to same
The code in
function CF_1FORMULA0031 return Char is
myfilename varchar2(256);
result varchar2(20);
barcodeData VarChar2(50) := :order_ID;
begin
myFileName := srw.create_temporary_filename;
barcodemaker.setBarWidthInch(globals.bcobj, 0.005);
barcodemaker.setBaseCodeData(globals.bcobj,barcodeData);
barcodemaker.setBarCodeType(globals.bcobj,globals.barcode_to_use);
myfilename := barcodeData;
barcodemaker.setFullPath(globals.bcobj, myFileName);
barcodemaker.renderBarCode(globals.bcobj);
return(myfilename);
end;
and i had opened the trace on and my trace says the below....
[2004/4/9 8:10:50:171] Debug 50103 (EngineManager:spawnEngine): Start engine command line = $ORACLE_HOME/bin/rwengine.sh -server -cp $ORACLE_HOME/reports/jlib/oraclebarcode.jar:$ORACLE_HOME/j2ee/home/lib/ojsp.jar:$ORACLE_HOME/reports/jlib/rwrun.jar:$ORACLE_HOME/jlib/zrclient.jar -Xbootclasspath/p:$ORACLE_HOME/vbroker4/lib/vbjboot.jar -Duser.language=en -Duser.region=US -Xmx256M oracle.reports.engine.RWEngine name=rwEng-0 server=rep ORACLE_HOME=/ora10g engineimplclass=oracle.reports.engine.EngineImpl traceopts=trace_all tracefile=$ORACLE_HOME/reports/logs/rep/rwEng-0.trc tracemode=trace_replace cacheDir=$ORACLE_HOME/reports/cache
which means the server is picking the jar files....
can any one tell me what can be the issue......
Advise me at the earliest................
cheers,
ALIHi Aamir,
The problem is that divisor by 0 (zero) is not possible.
So you need to make sure that in your calculation there's no division by zero.
In your case :bugamt is equal to zero then you will get this error.
So just make sure that :bugamt is not equal to zero.
You can do this as follows:
function avggFormula return Number is begin
IF :bugamt != 0 THEN
:cp_1 := (:bugamt-nvl(:totexp,0)/:bugamt)*100 ;
END IF;
return(:cp_1);
end;
Regards
Arif
Maybe you are looking for
-
I've searched to no avail for this problem. Similar posts but none that tell me what to do. I can't add or delete any bookmarks on my iPad 2 running the newest iOS. I know how it's suppose to work, it just isn't working! It started after the major up
-
This has given me a headache…. 11 Months ago I cancelled my bt vision service due to my Freeview signal not been good enough... I received a pre-paid package from BT to send it back, which I did. Fast forward 6 months, I realised I was still being ch
-
InputText and secret="true": do not display stars
Hi, I use ADF ea15. I have two af:inputText. One is secret, the other not. I use component binding for both (CoreInputText objects) because I need to disable these fields on some conditions. When I select an entry in a SelectOneListbox on the same pa
-
About to become a father...
My wife is going to have our baby tomorrow or Friday...She's going to be inducted so the birth is going to somehow advanced. So, I just wanted to share my happiness with all of you -:D You want pictures? You may need to wait for my "reporter" to get
-
Need to make Partner maintanance mandatory in installed base.
Dear CRM Folks, My requirement is..I need to make partner data mandatory at installed base if not maintained system should give error. Currently we can save installed base without Partner data maintained. I have checked all the BADI's given in IMG bu