REP-1804 report error 10g
I am attempting to run a delimited report through a form but throws error REP-1804 (not valid printer definition file). DESFORMAT is set to delimited but surely i dont need to have a delimited.prt file, not sure there is such a thing. Also when running direct from report builder delimited report is produce with no problems without a delimited.prt being present.
My question is why does it check for a .prt file when calling via form(command line) but NOT when running direct from report builder (10g).
For reference, report system parameters are DESFORMAT=delimited DESNAME=c:\xxx.dat DESTYPE=file MODE=character, calling from form (i.e.command line) parameters are p_location=ftp://xxxx:[email protected]/billingvatsummary.dat userid=xxxxx@xxx p_end_date=31-MAR-2005 paramform=NO username=xxxxx jobname=D:\xxxx\reports\FTS_xxxxx job_id=-1 p_start_date=01-JAN-2005 desname=ftp://xxxx:[email protected]/billingvatsummary.dat p_valid_pms="('xxxxxxx')" authid=ANONYMOUS destype=file destination=D:\xxxx\xml\ftp_pnd.xml report=D:\xxxx\reports\xxxxx distribute=yes background=yes expiredays=0 p_report_type=P desformat=delimited
Any help/suggestions gratefully recieved
Dave
I am attempting to run a delimited report through a form but throws error REP-1804 (not valid printer definition file). DESFORMAT is set to delimited but surely i dont need to have a delimited.prt file, not sure there is such a thing. Also when running direct from report builder delimited report is produce with no problems without a delimited.prt being present.
My question is why does it check for a .prt file when calling via form(command line) but NOT when running direct from report builder (10g).
For reference, report system parameters are DESFORMAT=delimited DESNAME=c:\xxx.dat DESTYPE=file MODE=character, calling from form (i.e.command line) parameters are p_location=ftp://xxxx:[email protected]/billingvatsummary.dat userid=xxxxx@xxx p_end_date=31-MAR-2005 paramform=NO username=xxxxx jobname=D:\xxxx\reports\FTS_xxxxx job_id=-1 p_start_date=01-JAN-2005 desname=ftp://xxxx:[email protected]/billingvatsummary.dat p_valid_pms="('xxxxxxx')" authid=ANONYMOUS destype=file destination=D:\xxxx\xml\ftp_pnd.xml report=D:\xxxx\reports\xxxxx distribute=yes background=yes expiredays=0 p_report_type=P desformat=delimited
Any help/suggestions gratefully recieved
Dave
Similar Messages
-
Report Error when running 10G Report
i am running 10G oracle forms and reports and i am calling reports through 10G forms using web.show_document(url,_blank);
but the follwing error is printed on the new opened web page
REP-51002: Bind to Reports Server mtmreports failed
what is its reason ?
plz help.
thanksEnsure that reports server mtmreports is up
pls read this (in end there are trouble shooting tips)
[ Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i ]
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
--------------------------------------------------------------------------------- -
Postscript report fail - REP-3000: Internal error starting Oracle toolkit
Hi,
I am receiving the error REP-3000: Internal error starting Oracle Toolkit when I am running a conc. program with postscript as output. I changed Active Users program and tested it. It failed.
Metalink says DISPLAY issue. I ran the concurrent program - "Prints environment variable values" giving DISPLAY as variable. I received a value. like <hostname>:0.0
What could be the issue?
Release - 11.5.10.2
OS -Linux
Apache, Forms on 1 Node, Concurrent Manager on the second one.
Database - 10g R2 on Unix.
Thanks
Cherrish Vaidiyan
Edited by: Cherrish on Aug 19, 2010 5:01 PMHi Hussein,
Please find the complete concurrent program log:
Application Object Library: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
FNDSCURS module: Active Users
Current system time is 19-AUG-2010 15:34:33
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.WE8ISO8859P1
REP-3000: Internal error starting Oracle Toolkit.
REP-3000: Internal error starting Oracle Toolkit.
Report Builder: Release 6.0.8.28.0 - Production on Thu Aug 19 15:34:33 2010
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 73686471.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 19-AUG-2010 15:34:46
I will check the old forums too.
Thanks -
Hi,
I'm getting the below error for reports.
The report terminated with error:
REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document. REP-0110: File test2. cannot be opened. .
When checked Environment using url 'http://host:port/reports/rwservlet/showenv?server=your_repserver_name"
found below
==================================================
Reports Servlet Environment Variables 11.1.1.4.0
Security Mode Non-secure
HTTP Environment Variables 11.1.1.4.0
SERVER_NAME 09.14.4.41
SERVER_PORT 8888
SCRIPT_NAME /rwservlet
SERVER_PROTOCOL HTTP/1.1
SERVER_SOFTWARE undefined
GATEWAY_INTERFACE undefined
SERVER_PORT_SECURE undefined
ACCEPT image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
REQUEST_METHOD GET
REMOTE_HOST test-wam-app
REMOTE_ADDR 09.14.4.41
REMOTE_USER undefined
AUTH_TYPE undefined
PATH_INFO showenv
QUERY_STRING server=RptSvr_test-wam-app_wamtest
PATH_TRANSLATED undefined
CONTENT_LENGTH undefined
CONTENT_TYPE undefined
AUTHORIZATION undefined
USER-AGENT Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.2; Trident/6.0; .NET4.0E; .NET4.0C; .NET CLR 3.5.30729; .NET CLR 2.0.50727; .NET CLR 3.0.30729; InfoPath.3; MS-RTC LM 8)
REMOTE_IDENT undefined
REFERER undefined
Oracle Reports Services - Servlet Environment Variables Select to jump to the top of the page Return to Top
KeyMapFile /u03/apptest/FMW_11.1.1/user_projects/domains/WamTest/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/cgicmd.dat
DBAUTH /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwdbauth.htm
SYSAUTH /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwsysauth.htm
server rep_wls_reports_test-wam-app_wamtest1
DIAGNOSTIC yes
ERRORTEMPLATE /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwerror.htm
SERVER_IN_PROCESS yes
COOKIEEXPIRE 30
ENCRYPTIONKEY reports9i
DIAGHEADTAGS undefined
DIAGBODYTAGS undefined
HELPURL undefined
RELOAD_KEYMAP undefined
IMAGEURL http://09.14.4.41:8888/reports/rwservlet
SINGLESIGNON no
Oracle Reports Services - Server and Engine Environment Variables Select to jump to the top of the page Return to Top
PATH /u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/java/jdk1.6.0_23/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin
DISPLAY
LD_LIBRARY_PATH /u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/../lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/opmn/lib:/u01/wamtest/FMW_11.1.1/apphome/lib
ORACLE_HOME /u01/wamtest/FMW_11.1.1/apphome
TNS_ADMIN /u01/wamtest/FMW_11.1.1/instance1/config
NLS_LANG AMERICAN_AMERICA.WE8ISO8859P1
USER_NLS_LANG
RW /u01/wamtest/FMW_11.1.1/apphome/reports
REPORTS_PATH /u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:/u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:
REPORTS_TMP /tmp
REPORTS_TAGLIB_URI /WEB-INF/lib/reports_tld.jar
java.class.path /u01/wamtest/FMW_11.1.1/apphome/reports/jlib/rwrun.jar
sourceDir
tempDir
useDataCache
ignoreDataParameter
=========================================================================
ORACLE_HOME is on mount point u03, checked config.properties but no mention of mount point /u01.
Dont know from where /u01 came. Could you please help me re configuring the env pointing to /u03.
Reports server is up though without any issues.
Regards,
DjayEnsure that the report name is correct. Also ensure that the report exist in REPORTS_PATH environment variable. Otherwise run the report including the reports path.
E.g.
report=<reports directory>/test2.rdf -
Reports error REP-0069,REP-57054,REP-300
hi,
I am getting below error while running the report.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: Parallel query is not supported on temporary LOBs
SELECT DP.DES ==> CRIPTION AS "DEPARTMENT",
Plz suggest.
Tks,
Shubhen1 Please always write complete English words as opposed to IM-speak as 'Plz'. We are not teenagers.
2 Do not dump all error messgaes in the Database General forum. This is an Oracle Reports message and does not belong in this forum.
3 All error messages can be looked up in the online documentation.
This error message is self-explanatory.
Sybrand Bakker
Senior Oracle DBA -
Error REP-0300: ORACLE error occurred while running Custom Report
Hi Team.
We are facing a very strange issue here.
We have an env , where all the custom reports are failing .Whereas the concerned env is a clone of the Production instance . There is one more instacne which is also a clone of the prod, over there these reports are working fine .
I have checked all the thread here about this error, but could not get the required information .
We are on RHEL 5 on Linux 64 bit server.
Could you please guide me , how to figure out whats the difference between these cloned instances .
We have an Sr with Oracle Support but its progressing very slowly.
Error trail from log file
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_FROM_DATE='2013/08/01 00:00:00'
P_TO_DATE='2013/08/10 00:00:00'
P_PROJECT_ORG='ALL'
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.AL32UTF8
Enter Password:
REP-0300: ORACLE error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: ORACLE error occurred.
Report Builder: Release 10.1.2.3.0 - Production on Thu Nov 28 07:41:22 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Thanks .Please confirm that you have the patches mentioned in (Doc ID 1368715.1) applied.
I understand this is a cloned instance, but this error is intermittent and having the patches applied should clear our doubts.
Thanks,
Hussein -
REP-1425 report formula DO_SQL error putting value into column
Hi all
I have opened a report 2.5 in Oracle9i Reports Developer and, it converted ok. However, when I run the report (paper layout), the message
rep-1425 report formula DO_SQL error putting value
into column. Column may not be referenced by parameter
triggers
appears. There are several report level formula columns and corresponding placeholder columns that are the cause of this error. The formula has the following :
SRW.DO_SQL('SELECT RPAD(''DAILY TABLE AUDIT REPORT'',60,''.'')||TO_CHAR(SYSDATE,''DD-MON-YYYY'') INTO :REPORT_TIT FROM DUAL');
COMMIT;
RETURN('');
I can't work out what this error message really means as the column, report_tit is a placeholder column and, the formula column is not a parameter trigger!! The report_tit placeholder is used as a source for a layout field. I noticed that the layout field is defined as a placeholder column in the converted report but in the reports 2.5 version, it is defined as a layout field.
I can do a work around by replacing the SRW.DO_SQL statement with a normal PL/SQL SELECT statement. However, I wonder if anyone else has had the same problem and, if anyone can help provide an answer as to what this error really means and, also, how I can retain the SRW.DO_SQL statement and/or an alternative work around to the one that I have described.
Thanks.
Therese Hughes
Forest Products CommisionHi again
The firewall proved to be the problem after all! The firewall set in Reports config-files is not used for WebServices, it has to be set within the stub:
Properties prop = System.getProperties();
prop.put("http.proxyHost","yourProxyServer");
prop.put("http.proxyPort","youProxyServerPort");
I inserted this in my java-code and after some problems (see below), restarting Report Builder turned the trick, the report works now.
Cheers
Tino
Here there mail I set up before I found that restarting Report Builder helped:
Thanks for your answer, putting in the proxy-settings actually helped some - the same error message is
popping up, but instantly and not after 10 seconds like before:
My proxy lines look like this, I also tried "http://proxy.ch.oracle.com", but "proxy.ch.oracle.com" proved to
be the correct syntax:
public Float getRate(String country1, String country2) throws Exception
Float returnVal = null;
Properties prop = System.getProperties();
prop.put("http.proxyHost","proxy.ch.oracle.com");
prop.put("http.proxyPort","8080");
URL endpointURL = new URL(endpoint);
Call call = new Call();
I tested the new proxy-entries by disabling the proxy preference in JDeveloper, so I could verify the added
proxy-lines in the code work - they do. If I change the proxy to some incorrect value like
"proxyy.ch.oracle.com", they fail.
After unsuccessfully trying recompile and re-import of Java classes, I rebuild the report from scratch and
stumbled over the same problem. Now the question is, whether I'm still doing something wrong with the
proxy or whether there is another problem after passing the firewall....
------------------------------------------------------------------------------------------------------------- -
Adobe Reader error with PDF reports created using AS Reports Server 10g
Hi,
Recently when trying to run reports in our system (which uses Oracle Application Server Forms & Reports Services 10g - 10.1.2.0.2), sometimes when we try to run a report in PDF format the following happens:
1. A new window appears as expected
2. This window hangs/appears to try to load for a couple of minutes
3. Eventually an Adobe Reader error message appears saying the following:
*"There is a problem With Adobe Acrobat/Reader. Please exit Adobe Acrobat/Reader and try again".*
I have noticed that this problem only seems to occur when the client has Adobe Reader 9.3 installed (8.2 works fine).
Has anyone else encountered this problem? Is there a known workaround or is this a known issue?
Many thanks,
ChrisDoes anyone have any ideas on this or has anyone encountered the same problem?
thanks -
Output required in MS Excel from Reports Oracle 10g error with built in pac
Hi All,
Our requirement is to get matrix report output in MS Excel. For that i found a report online. However, im having issues with Built-in Package OLE2.obj_type.
Below is the report log file:
******* Custom: Version : UNKNOWN
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XX_MATRIX_REPORT module: XX_MATRIX_REPORT
Current system time is 10-AUG-2012 17:23:17
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Enter Password:
REP-0736: There exist uncompiled program unit(s).
REP-0736: There exist uncompiled program unit(s).
REP-1247: Report contains uncompiled PL/SQL.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1247: There exist uncompiled program unit(s).
REP-1247: Report contains uncompiled PL/SQL.
Report Builder: Release 10.1.2.3.0 - Production on Fri Aug 10 17:23:19 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 11242010.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Output file size:
0
Finished executing request completion options.
Concurrent request completed
Current system time is 10-AUG-2012 17:23:20
Please Help!!!After Report:
function AfterReport return boolean is
begin
RPT2XLS.release_memory;
srw.user_exit('FND SRWEXIT');
srw.message(101,'After Report');
return (TRUE);
end;
RPT2XLS package body:
PACKAGE BODY RPT2XLS IS
TYPE ExcelCell IS RECORD(RowNo binary_integer,
ColNo binary_integer,
Val varchar2(2000),
FontName varchar2(20),
FontSize binary_integer,
FontStyle binary_integer,
FontColor binary_integer,
BgrColor binary_integer,
Format varchar2(60),
Align xlHAlign
TYPE ExcelCells IS TABLE OF ExcelCell;
Cell ExcelCells := ExcelCells();
CurrentRow binary_integer := 1;
PROCEDURE new_line IS
BEGIN
CurrentRow := CurrentRow + 1;
END;
PROCEDURE put_cell(ColNo binary_integer, CellValue in varchar2,
FontName in varchar2 DEFAULT null,
FontSize in binary_integer DEFAULT null,
FontStyle in binary_integer DEFAULT null,
FontColor in binary_integer DEFAULT null,
BgrColor in binary_integer DEFAULT null,
Format in varchar2 DEFAULT null,
Align in xlHAlign DEFAULT null
) IS
BEGIN
Cell.Extend;
Cell(Cell.Last).RowNo := CurrentRow;
Cell(Cell.Last).ColNo := ColNo;
Cell(Cell.Last).Val := CellValue;
Cell(Cell.Last).FontName := FontName;
Cell(Cell.Last).FontSize := FontSize;
Cell(Cell.Last).FontStyle := FontStyle;
Cell(Cell.Last).FontColor := FontColor;
Cell(Cell.Last).BgrColor := BgrColor;
Cell(Cell.Last).Format := Format;
Cell(Cell.Last).Align := Align;
END;
PROCEDURE run IS
Application OLE2.OBJ_TYPE;
Workbooks OLE2.OBJ_TYPE;
Workbook OLE2.OBJ_TYPE;
Worksheets OLE2.OBJ_TYPE;
Worksheet OLE2.OBJ_TYPE;
WorkCell OLE2.OBJ_TYPE;
WorkColumn OLE2.OBJ_TYPE;
WorkFont OLE2.OBJ_TYPE;
WorkInterior OLE2.OBJ_TYPE;
ArgList OLE2.LIST_TYPE;
BEGIN
Application := OLE2.create_obj('Excel.Application');
OLE2.set_property(Application, 'Visible', 1);
Workbooks := OLE2.get_obj_property(Application, 'Workbooks');
Workbook := OLE2.invoke_obj(WorkBooks, 'Add');
Worksheets := OLE2.get_obj_property(Workbook, 'Worksheets');
Worksheet := OLE2.get_obj_property(Application, 'ActiveSheet');
for i in Cell.First .. Cell.Last
loop
if Cell(i).Val is not null then
ArgList := OLE2.create_arglist;
OLE2.add_arg(ArgList, Cell(i).RowNo);
ole2.add_arg(ArgList, Cell(i).ColNo);
WorkCell := OLE2.get_obj_property(Worksheet, 'Cells', ArgList);
ole2.destroy_arglist(ArgList);
ole2.set_property(WorkCell, 'Value', Cell(i).Val);
ole2.set_property(WorkCell, 'NumberFormat', Cell(i).Format);
if Cell(i).Align is not null then
ole2.set_property(WorkCell, 'HorizontalAlignment', Cell(i).Align);
end if;
WorkFont := OLE2.get_obj_property(WorkCell, 'Font');
WorkInterior := ole2.Get_Obj_Property(WorkCell, 'Interior');
if Cell(i).FontName is not null then
OLE2.set_property(WorkFont, 'Name', Cell(i).FontName);
end if;
if Cell(i).FontSize is not null then
OLE2.set_property(WorkFont, 'Size', Cell(i).FontSize);
end if;
if mod(Cell(i).FontStyle, 2) = 1 then
OLE2.set_property(WorkFont, 'Bold', 1);
end if;
if mod(Cell(i).FontStyle, 4) > 2 then
OLE2.set_property(WorkFont, 'Italic', 1);
end if;
if mod(Cell(i).FontStyle, 8) > 4 then
OLE2.set_property(WorkFont, 'Underline', 2);
end if;
if Cell(i).FontColor is not null then
OLE2.set_property(WorkFont, 'ColorIndex', Cell(i).FontColor);
end if;
if Cell(i).BgrColor is not null then
OLE2.set_property(WorkInterior, 'ColorIndex', Cell(i).BgrColor);
end if;
OLE2.release_obj(WorkInterior);
OLE2.release_obj(WorkFont);
OLE2.release_obj(WorkCell);
end if;
end loop;
ArgList := ole2.create_arglist;
ole2.add_arg(ArgList, 'A:Z');
WorkColumn := ole2.Get_Obj_Property(WorkSheet, 'Columns', ArgList);
ole2.destroy_arglist(ArgList);
ole2.invoke(WorkColumn, 'AutoFit');
OLE2.release_obj(WorkColumn);
OLE2.release_obj(Worksheet);
OLE2.release_obj(Worksheets);
OLE2.release_obj(Workbook);
OLE2.release_obj(Workbooks);
OLE2.release_obj(Application);
END;
PROCEDURE release_memory IS
BEGIN
Cell := ExcelCells();
SYS.DBMS_SESSION.free_unused_user_memory;
END;
END;
We are getting the error in log file Report contains uncompiled PL/SQL.
due to ole2.obj_type... -
Reports Error Page 10g NullPointerException
We have created a JSP report that produces Excel output via method outlined in the example given in the HowTo:
http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/excel/index.html
The JSP runs fine under 9.0.2 iAS but when we moved the report to a 10g AS we get the following error:
Reports Error Page
Mon May 24 11:50:26 BST 2004
java.lang.NullPointerException
java.lang.NullPointerException
at com.evermind.server.http.EvermindBodyContent.setCharacterEncoding(EvermindBodyContent.java:458)
at com.evermind.server.http.EvermindPageContext.pushBody(EvermindPageContext.java:630)
at oracle.jsp.runtime.OracleJspRuntime.pushBodyIfNeeded(OracleJspRuntime.java:1385)
at examples.test._test1._jspService(_test1.java:55)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:349)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:604)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
Any ideas what could be causing the report to fail and ways to make the report run under 10g As?Try adding charset to the content type
e.g:
<%@ page contentType="application/vnd.ms-excel;charset=ISO-8859-1" %>
- Vinayak -
Hi Gurus
We have created a custom oracle report and concurrent program and when we ran the concurrent program it is error out with below error
Enter Password:
REP-0004: Warning: Unable to open user preference file.
REP-0300: ORACLE error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-300: ORACLE error occurred.
Can any one help us
Thanks in advance.
KumarPlease see
REP-0004 Warning - Unable to Open User Preference File. (Doc ID 26014.1)
ApPsMaStI
sharing is Caring -
"Rep-0999 Unimplemented Error" while converting a report to PDF format...
i have developed a number of complex reports with several queries and formula objects, all running successfully and converting to other formats accuratelly.
i have report of Accounts Receivables, a complex one, running near about 10 queries and 7 formula column database functions to calculate values for each row return, this report works accuratelly and converts to other formats easily but takes full 60 to 70 seconds to run the report.
management asked me to enhance the performace of this report,
i had worked out and reduce the number of queries and formula columsn to one single query with 5 nested(union queries) queries. execution times reduces to 3 to 5 seconds with accuracy.
Report displays correctelly but give an error "Rep-0999 Unimplemented Error" whenver we converts it to pdf or other sources.
While other complex reports were still converting successfully.
Help me out of this problem,.... im hands up at this situation.
byeThank you Piyush!
It really works, you idea and understanding is 100% accurate,
i have lexical variable, to whom i assign two values either "<> 0" or "is not null",
i had omitted the space from "<> 0" and make it "<>0", now it works properly,
only one confussion left, if i pass "is#not#null" from form, how can i can convert it on report to "is not null",
once again thanks a lot -
Reports error REP-0002 Unable to retrieve a string
I am continuing to receive this error in the production database. All I need to do is to recompile the report in the production database and use the new reports runtime.
Does any one know why is this happening and is there any solution for it.
REP-0002: Unable to retrieve a string from the Report Builder message file.
I am using Reports 3.0 and Windows NT.
Thanks in advance for your help.
nullMetalink <Note:1076529.6> extracts
Problem Description
When running a *.REP generated report file you get errors:
REP-00002 Unable to retrieve string from message file
REP-01439 Cannot compile program since this is a runtime report
Running the same report using the *.RDF file is successful.
You are running the report with a stored procedure,
OR you are running against an Oracle instance other than the one developed on,
Or, you recently upgraded your Oracle Server.
Solution Description
1) Check that the user running the report has execute permissions on any stored
SQL procedures called. <Note:1049458.6>
2) Run the report as an .RDF not an .REP , that is remove or rename the .REP
version of the report. <Note:1012546.7>
3) Compile the report against the same instance it is being run against.
<Note:1071209.6> and <Note:1049620.6> -
I am getting report error rep-0736&rep-1247 from concurrent
Hi,
I am running inventory report from concurrent is giving error as rep-0736&rep-1247.That report is giving result in report builder.
Can anybody please tell me.It's urgent.
Thank You,These two errors are just saying that there is uncompiled PL/SQL in the report:
REP-0736: There exist uncompiled program unit(s)
REP-1247: Report contains uncompiled PL/SQL
When you are running your report in Reports Builder are you using the same database connection as when the report is run from the concurrent manager (ie are you logged on as APPS in Reports Builder)?
If not, I would guess that the user you are connected to in Reports Builder has access to a database object you are referencing in PL/SQL that the APPS user does not have access to or refers to by a different name.
If you are connected as APPS, then I would suggest that you do a full recompile in Reports Builder (Program -> Compile -> All) and see if that identifies any errors. -
6i to 10g migration report error.
when i migrated my 6i reports to 10g it doesnt show frames. Please help me.....
Thanks in advance...fasilvadakoot wrote:
no 6i forms and reports to 10g........no 6i forms and reports 10g means ???
Do u test the report at design time from reports developer. What is the output ? Check it at Layout Mode and run Layout view.
Hope this will help you.
Maybe you are looking for
-
Flashing Folder icon with Question Mark
While trying Garage Band, I saved a project 'the long way' so as to open it via the Media Browser. Big mistake. Enter rainbow ball of ****. I tried to force quit because all I was hearing was a grinding away like 'crickets' says my daughter. Could be
-
Server 2012 SMB 3.0 file cluster issues with Streaming media services 2008 R2
So I have a file server setup with the always available feature turned off on this brand new cluster. Everything seems to function normally and I can hit files from the shares no problem. My issue I built a brand new 2008 R2 machine and created an on
-
Approvals for online tax form (w4) and manage payroll payments in SSHR
Can someone throw ideas how to build the approvals in workflow? Oracle did not provide approvals for both the functions W4 and Manage payroll payments(change/modify payment methods)
-
Hi, At present, we create a single enterprise archive (.ear) containing all utility packages (3rd party, framework) (jars) and EJB deployments. Our current .ear file is approximately 14MB. During a recent investigation to resolve a JNI DLL reloading
-
IPhoto's deficiencies: Archiving and streamlining
I feel there are two pressing deficiencies in iPhoto that a future release must address. Both are due to the burgeoning size of my iPhoto library. 1. iPhoto offers to archive photos to CD or DVD, but Apple have clearly indicated Optical media is on i