REP-1814 error message

Hi,
Can someone tell me why I am getting this error while runing a report?. the error message is REP-1814: Report cannot be formatted. Object 'vertically' can never fit within 'B_272'.
I don't have any object called 'Vertically' in my report. B_272 is just a text field.
Thanks alot
Kavita.

never mind, I figured out that the 'print object on' property of the frame above the current frame is causing this error.
-Kavita.

Similar Messages

REP-1920 Error Message

Our project has reports that fail with the following error message:
REP-1920: Character mode runtime incompatible with
DESFORMAT of PDF, HTML, HTMLCSS, or RTF.
It is not always the same reports that receive the above message, it appears to be random in nature. Indeed, the vast majority of time these reports run with no errors at all. All of a sudden, out of the blue, certain reports (no pattern, it could be any of our reports) will fail with the REP-1920 error message.
To make matters worse, NONE of our reports are in CHARACTER mode. All have an initial value of DEFAULT (i.e. BITMAP). Now we do have one report that generates a CHARACTER report dynamically, by passing a paramter at runtime, but that report (the .rdf) has a DEFAULT mode as well, and is run off of a different report server than all the other reports.
I have scoured the NET and have not found anything that can tell me why we are receiving these error messages. Anybody?
Note: We are running Report Server 6i Patch 10 (6.0.8.19.0) on a Windows 2000 box. Dev Tools are Patch 10 as well.
Thanks
James Walters

Hi James,
We have never heard of this issue before. We can undeerstand the REP error if there is some contradiction in Report request between deformat and the mode. But since you told this happens once in a while, that too randomly, it seems, wrong message is being displayed. I suggest you get in contact with Oracle support on this issue. This need to be looked into.
Thanks,
Rohit

Information truncated after résolving the REP-1814 error

Hi,
At first time I had this message REP-1814 Object vertically can never fit within F_Remarque that i could résolve by making all the field in this group Expand vertically as well as the Group itself and no page protection at any frame.
But the problem i have now tha this item should appear in two pages, but it's truncated to appear only in the first page.
The Higher frame was set in properties to print on First Page, and when i put it to All Pages
in order to have all the information displayed, the error REP-1814 Object vertically can never fit within F_Remarque appears again.
I will really appreciate your suggestions.
Thanks

I finally found the solution, i just had to put th property 'Print object on ' to 'First page' for the item f_remarque and all the frames of higher hierachy.
Thank for all.
Edited by: manzana on Apr 4, 2011 2:10 PM

REP-3000 Error Message

I have install Web Reports Server 6i on Solaris 2.8 x_86 platform and i hav configure its above documentation. I can start it under OAS 4.0.7 web listener. Then, if i want to create the test report on the web, i receive an error message:
REP-3000: Internal error starting Oracle Toolkit.
Tell me please, what can i do.

You may be right. But in this case i don't know another plase, there nls-support (*.nlb) files are may be installd. In my $ORACLE_HOME there are no directory, naming like datad2k. I think, that Developer 2k use nls-support files from base nls directory, because i install if after RDBMS, but after installation of Developer 2k in the list of installed products i so, that it content the 8.0.6 NLS-Support Files and Libraris. I in the firm belief that it is not RDBMS files, becouse the version of RDBMS is 8.0.5.
It meens, that the cause of REP-3000 error is other. If you know some more about it, tell me please.
null

Another REP-1814 error

I know that this had to do with allowing room but I cannot seem to find where the problem is.
REP-1814 Object vertically can never fit within R_G_FULL_CPT
I've made all the field in this group Expand vertically as well as the Group itself and I still get the error. Where else can I look? Every singled field and group is either set to Expand or Variable. Thanks for your help or ideas.

Nevermind. I figured it out. I just started removing elements from the report until it ran. I narrowed it down.
Turns out that the group R_G_FULL_CPT was set in properties to print on All Pages. When I changed it to First Page, it worked. I'm not completely sure why, but it works.

REP-1276 ERROR MESSAGE

I am trying to move a database column value into a placeholder to manipulate later. I get the following error: REP-1276 'Placeholder<name> references one or more non-formula columns'.
Here is the script:
function PH_F_UNB_OBLIGFormula return Number is
begin
:ph_f_unb_oblig := :unb_oblig;
return(:ph_f_unb_oblig);
end;
null

fist of all, inside placeholder object is not allow to insert code, only save values from any function or formula, please test with formula column
I hope, it could be useful for you.
null

Rep=2103 error message in oracle 10g

Hi After migrating from 6i to 10g I am getting the following msg when I try to generate a report:
rep-2103: column 'cf_street_address' : pl/sql formula returned invalid value or no value
I have the following code in my function:
function CF_street_addressFormula return VARCHAR2 is
begin
return(:address_line_1||' '||:address_line_2||' '||:address_line_3||' '||:address_line_4);
end;
Please help.

I'm using Reports 9.0.4.0.19 and I recreated the scenario without any issues. I'm just wondering what would happen if you wrapped the :address_lines in nvl's in case 10g cares.
return(nvl(:address_line_1,' ')||' '||nvl(:address_line_2,' ')||' '||nvl(:address_line_3,' ')||' '||nvl(:address_line_4,' '));
Sorry, I could reproduce the problem.
-mike

REP-1814 Error

Friends,
I'm working on a report to generate a delimited file. I've designed a report with one field. Each row of the SQL output is concatenated as a string and printed out.
Issue is : when the length of the string goes over 80 columns it puts it on a new line.
The report needs to print each row of SQL output as a single line ignoring the width. I've tried changing the report width, Horizontal Elasticity to variable. In application I've Style set to Dynamic Portrait (col=2050 and row=66)
Any ideas pls share.
T

Hello,
Do you execute the Reports in MODE=BITMAP or MODE=CHARACTER ?
If you use the MODE=CHARACTER, check the prt file :
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/files/printing/prt_a_packaged_printer_def.htm
Regards

Imported image error - REP-6106: Error in XML Report Definition

I created a report with an image using Insert/Image. I've tried bmp, gif, jpg. The reports works fine so I save it. When I reopen this file, I get the REP-6106 error message "Invalid element 'image' in content of 'repeatingFrame'. expected elements [comments, geometryinfo...etc.....]".
Any ideas?
Thanks,
Albert

This is a bug, I have filed bug 2546295 to track this.
Thanks for finding this.
-Shaun

Cannot boot my MacBook Pro. Tryed CMD+R, reinstall OS, error message :damaged HD. When trying to repait it says it's OK. Yesterday HD wasn't even half full when I turned it off, now it says it's full.

Cannot boot my MacBook Pro. Tryed CMD+R, reinstall OS, error message :damaged HD. When trying to repait it says it's OK. Yesterday HD wasn't even half full when I turned it off, now it says it's full.

What may have happened is an error and a kernel panic, filling up the logfiles.
What I recommend is first to find a way to backup your data without booting the hard drive directly if it isn't already backed up, and then get Alsoft Disk Warrior to repair the hard drive.    You'll probably want an external drive from http://www.macsales.com/
And you'll want to go into Hard drive -> Library -> Logs, System -> Library -> Logs, and Users -> yourname -> Library -> Logs to remove whatever you find there.
If after booting it fills up again, start by removing all startup items in your System Preferences for your user, and rebooting in safe mode with the shift key held down. If the hard drive is over 85% full after removing the logfiles, you may want to look at what were the last applications you installed.
Peer2peer software if installed can be as bad as a virus, because it enables others to access your computer. Insecure wireless networks are just as bad, if they are WEP or no encryption and someone is within 1500 feet of your computer.
If no such software is installed, your RAM probably has failed.    Run the hardware test that came with your computer, by booting with the 'D' key.
If nothing shows up there, it can still be the RAM.   Especially if you've seen any 4 language screens telling you to restart.
Here's more on kernel panics:
http://www.macmaps.com/kernelpanic.html*

Generating delimited file from a report in reports 6i gives error rep-1814

Hi all,
We are using reports 6i.
We have a report from which we are trying to generate a delimited file.
We are encounterign the error REP-1814 The object vertically can never fit.
After looking into forums we came to know that there is something like DELIMITED_HDR should be set to NO..
Also we observe dthat this is done using th following command
set_report_object_property('exp039r', null,
' DELIMITER=tab' ||
'DELIMITED_HDR=no');
We tried doing that but, it is not working. Is there anything we should do to get it work.
Thanks and Regards,
Hima

See in Forms Forum
generating delimited file from a report in reports 6i gives error rep-1814

REP-56071: Security check failed with error message: Error code30009 - Gene

REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
Hello,
I am also receiving the above error - these reports are deployed on our Portal - to which all registered SSO users should have access to.
one more thing...
We obtain the error only when execute under some "load", example: 15 reports running simultaneously.
Tx,
Diego.

I am also facing this problem - I've deployed the reports on the Portal and authenticated users can access the reports.
The problem is that when any authenticated user tries to access the report, on his very first access this error is shown.
REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
But after the user click on the Personalize link of the portlet and specify the parameters values(which are empty initially) then report runs fine.
Plz let me know the solution as no user will like to see this error message for the first time he opens the report.
Regards.

Error Rep-1814??? Urgent!

Hi Everybody,
I am facing a strange error.
REP-1814: Report cannot be formatted. Object '<object name>' can never fit within '<location>'.
A report is run using different databases it work fines in all cases but in one case it prints more than first 200 pages & then gives the above error and the error keeps on moving to other fields when one field is edited
Plz help

The first thing you should do is make sure that you're on the latest patch set.
If this doesn't resolve the problem then there's a note on Metalink that may help. Search for rep-1814 and you should find it - unfortunately tracking this down is likely to be a long process, especially if it's only reproducing after 200 pages. You may want to look at the data that's being returned at this point and see if that offers any clues.
Regards,
Danny

REP-1849 HELP! Reports 6i runtime error message REP-1849

Running Reports runtime 6 on Windows 2000 server.
Printing to either printer from Notebook, prints OK.
Printing to network HP LaserJet 8150 PL 6, all is OK
Printing to network HP LaserJet 5Si MX this happens:
The end of the trace log:
13:45:11 APP ... ) Group G_1
13:45:11 APP ... ( Group G_2 Local Break:
2 Global Break: 2
13:45:11 APP ... ) Group G_2
13:45:11 APP .. ) Repeating Frame R_2
13:45:11 APP . ) Frame M_2_GRPFR
13:45:11 APP ) Frame
13:45:13 ERR REP-1849: Failed while printing.
This error message is not detailed so that the problem can be
figured out. I assume it is a driver problem....
Any help Please? Project is stopped dead for this portion...
Thank you in advance..
Les Briesemeister

We have set the DESFORMAT variable to DFLT but we are getting the same error. When we click in Choose Printer in rw60bld we get the error REP-3002 (Error initializing printer. Please make sure a printer is installed) and when we try to run the command: rwrun60 we get the error:REP-0713: Invalid printer name 'fuenla" specified by parameter where fuenla is the name of the printer.
Thank you very much in advance

Error Message: REP-0606

Hi,
I got a error message in Report 6i:
REP-0606: unable to read link file 'I:\0\ABC.JPG'. check link file format.
How do I check the link file format?
Thanks.
Jun

Hi Jun,
This error doesn't come for all JPGs.
You can try the following :
1) Use an Image Editor/Converter to save the file.
In this case, use some Image Editor, and SAVE the file AS the same/or different filename. This should mostly resolve your problem.
2)Load image into OLE item.
Thanks,
Vinod

REP-1814 error message

Similar Messages

Maybe you are looking for