REP-1814 Error
Friends,
I'm working on a report to generate a delimited file. I've designed a report with one field. Each row of the SQL output is concatenated as a string and printed out.
Issue is : when the length of the string goes over 80 columns it puts it on a new line.
The report needs to print each row of SQL output as a single line ignoring the width. I've tried changing the report width, Horizontal Elasticity to variable. In application I've Style set to Dynamic Portrait (col=2050 and row=66)
Any ideas pls share.
T
Hello,
Do you execute the Reports in MODE=BITMAP or MODE=CHARACTER ?
If you use the MODE=CHARACTER, check the prt file :
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/files/printing/prt_a_packaged_printer_def.htm
Regards
Similar Messages
-
Hi,
Can someone tell me why I am getting this error while runing a report?. the error message is REP-1814: Report cannot be formatted. Object 'vertically' can never fit within 'B_272'.
I don't have any object called 'Vertically' in my report. B_272 is just a text field.
Thanks alot
Kavita.never mind, I figured out that the 'print object on' property of the frame above the current frame is causing this error.
-Kavita. -
Information truncated after résolving the REP-1814 error
Hi,
At first time I had this message REP-1814 Object vertically can never fit within F_Remarque that i could résolve by making all the field in this group Expand vertically as well as the Group itself and no page protection at any frame.
But the problem i have now tha this item should appear in two pages, but it's truncated to appear only in the first page.
The Higher frame was set in properties to print on First Page, and when i put it to All Pages
in order to have all the information displayed, the error REP-1814 Object vertically can never fit within F_Remarque appears again.
I will really appreciate your suggestions.
ThanksI finally found the solution, i just had to put th property 'Print object on ' to 'First page' for the item f_remarque and all the frames of higher hierachy.
Thank for all.
Edited by: manzana on Apr 4, 2011 2:10 PM -
I know that this had to do with allowing room but I cannot seem to find where the problem is.
REP-1814 Object vertically can never fit within R_G_FULL_CPT
I've made all the field in this group Expand vertically as well as the Group itself and I still get the error. Where else can I look? Every singled field and group is either set to Expand or Variable. Thanks for your help or ideas.Nevermind. I figured it out. I just started removing elements from the report until it ran. I narrowed it down.
Turns out that the group R_G_FULL_CPT was set in properties to print on All Pages. When I changed it to First Page, it worked. I'm not completely sure why, but it works. -
Generating delimited file from a report in reports 6i gives error rep-1814
Hi all,
We are using reports 6i.
We have a report from which we are trying to generate a delimited file.
We are encounterign the error REP-1814 The object vertically can never fit.
After looking into forums we came to know that there is something like DELIMITED_HDR should be set to NO..
Also we observe dthat this is done using th following command
set_report_object_property('exp039r', null,
' DELIMITER=tab' ||
'DELIMITED_HDR=no');
We tried doing that but, it is not working. Is there anything we should do to get it work.
Thanks and Regards,
HimaSee in Forms Forum
generating delimited file from a report in reports 6i gives error rep-1814 -
Error Rep-1814??? Urgent!
Hi Everybody,
I am facing a strange error.
REP-1814: Report cannot be formatted. Object '<object name>' can never fit within '<location>'.
A report is run using different databases it work fines in all cases but in one case it prints more than first 200 pages & then gives the above error and the error keeps on moving to other fields when one field is edited
Plz helpThe first thing you should do is make sure that you're on the latest patch set.
If this doesn't resolve the problem then there's a note on Metalink that may help. Search for rep-1814 and you should find it - unfortunately tracking this down is likely to be a long process, especially if it's only reproducing after 200 pages. You may want to look at the data that's being returned at this point and see if that offers any clues.
Regards,
Danny -
REP-1814 when running delimited over web
Hi,
I have a report that runs fine over the web when:
Destination Format is HTML
Destination Format is PDF
Destination Format is delimited with headers turned on.
As soon as I use the flag delimited_hdr=no (which of course is what I want), I get error:
REP-1814: Report cannot be formatted. Object 'vertically' can never fit within 'F_Q1_TARIFF_AREA'.
Any thoughts as to why I only get this error when trying to run the report with delimited_hdr=no and suggestions to a resolution.
Thanks.
Darren.
nullI didn't precise that reports failed to be executed with desformat=delimited but succeded with desformat=pdf.
Why Reports server on linux is unable to generate a full text report but can generate a pdf report ? -
REP-1814: Report cannot be formatted. Object 'vertically' can never fit
Hi,
Iam using report server 9.0.2. I have a typical problem. I have developed the report which works fine on the windows environment. But when same report is executed on AIX machine it is giving the problem
REP-1814: Report cannot be formatted. Object 'vertically' can never fit
within 'F_17'.
What could be the problem? Do we need to change the setting or layout as per the environment specific?
can any one help out in solving this problem plz
it very urgent.
thanks
KalyanI had this issue too, and finally discovered the problem. In my situation it had nothing to do with the vertical size of the field. The problem was with the proximity of the offending field to its enclosing frame. Not its vertical proximity, as the error message would have you believe, but its horizontal proximity.
The magic number seems to be 5 spaces (I'm refering to a 'space' as pressing the arrow key when the field is selected) to away from the enclosing frame. I played with it, and when the field was only 4 spaces or closer to the frame, I got the "Object 'vertically' can never fit ... " error again. Again, not 5 spaces vertically away from the frame, but 5 spaces horizontally away from the frame. Hope this helps.
Nate -
I have a report, generated with Oracle Reports 6i, that when I generate it and view it in the previewer, it is generated without any problems and I am able to see the report.
When I tried to save it by going to File -> Generate to File -> PDF, I am getting the error message REP-1814: Report Cannot be formatted. Object 'vertically' can never fit within 'B_1'.
Does anyone have an idea of what's going on? Thanks.Hi Mihn,
Thanks for your reply.
Actually, I was just able to solve this issue. All I did was to add a printer to the user's desktop. After doing that, the user can now save the report as any format she wants. -
Report 6i/Webdb -Not able to display the report in the browser - rep- 3002 error.
Would someone tell what I missed, I have set up the following:
1) a report using report builder on NT
2) my database is in Unix
3) my report server is started in NT
4) I run webdb listener for the following code: http://myweb.com/cgi/rwcgi60.exe?server=repserver+report=myreport+userid=usid/pw/connect_string+destype=cache+desformat=html. Then, I receive this message:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Report Job has terminated with error.
Reports Server Replies:
REP-3002: Error initializing printer. Please make sure a printer is installed.
Why is it thinking I want to use the printer whereas I want to display the report in the browser?. Any help would be appreciated.
nullIt sounds like that your Web CGI did not configure right. To test if your CGI configuration is correct, type:
http://hostname:port/cgi-bin/rwcgi60exe?
If you get a help screen, then you should be able to bring up your report.
Regards,
Xiaoling -
REP-770 Error while executing the report.
Hi,
I am trying to run a report in Application Server 10g. I am executing this report from a form.
When I try to run the report using the 'rdf', I get the error
"Terminated with error: <br>REP-770: There exist uncompiled program unit(s). REP-1247: Report contains uncompiled PL/SQL."
But if I run the report as 'rep' then the report works fine. Now after this if I run the report as 'rdf', it works fine again.
Just to summarise - The problem occurs if I first try to run the report as rdf. But the problem disappears if I run the report as rep first before running it as rdf.
Could someone help me solve this issue.
Thanks
ArunaHi Aruna,
I can see 2 bugs logged on Reports 9.0.4.1 (that means 10g patch 1) that report a similar problem:
BUG 4050488 - JSP REPORTS CONTAINING REF CURSOR ASKS FOR COMPILATION EVERYTIME WITH WEB LAOUT
and
BUG 4040844 - REF CURSOR QUERY REP-737 ORA-1247 RUNNING ON LINUX
Another bug reported on 10g has been fixed in upcoming Reports version 10.1.2:
BUG 3324576 - SRW.APPLY_DEFINITION IN PGM UNIT FAILS USING .REP FILE WITH REP-1457 ERROR
They are published bugs. See if you are hitting the same issue. Though I don't think that these bugs reported REP-1247 only the FIRST time you run the report.
Secondly, when I said "compile on the same platform on which you are going to run", I meant this - if you are going to run the report on OracleAS installed on Win 2000, you must compile the report in Reports Builder on Win 2000. Similarly, if you are going to run the report on OracleAS installed on Linux, you must compile the report in Reports Builder on Linux, before running it.
Navneet. -
Reports Builder Error - REP 1070 Error while opening or saving document
Hi,
I tried opening an rdf file in Reports Builder 10g and 6i. I get the REP 1070 error.
Kindly suggest a solution for this.
Thanks,
AnandHi,
Edit the system registry and assign REPORTS_PATH then your problem will be cleared. -
REP-3002: Error initializing printer
Hello,
This is my configuraton:
Computer 1 : nt4, sp3, installed: Oracledatabase 7.3.4
Computer 2 : nt4, sp3, installed: Oracle WebDb, forms 6i, formserver 6i and reports 6i.
Services WebDb and Listener are running.
I've connected an HP LaserJet III to the parallel port of computer 2. In the printer
control panel of NT4, this printer is set as the 'default' printer.
'myform.fmx' is a simple form.
The code consists only of a 'when-button-pressed' trigger as follows:
declare
pl paramlist;Ln varchar(15) :='Elsa';
BEGIN
pl :=get_parameter_list(Ln);
if not id_null(pl) then destroy_parameter_list(pl);end if;
pl :=create_parameter_list('Elsa');
add_parameter(pl,'DESTYPE', text_parameter,'PRINTER');
run_product(REPORTS,'C:\ORANT\REPORT60\myrep.rep',1,BATCH,FILESYSTEM,pl);
destroy_parameter_list(pl);
END;
'myrep.rep' is a simple report, consisting of:
select user from dual;
generated by the wizard.
When I run the form in preview for the web in formbuilder 6i, then it works very well,
it prints my report.
But when I run it from the cgi 'ifcgi60.exe' by the command
start -> programs -> oracle forms 6i -> run a form on the web
it returns
http://pent2.easyware.be/dev60cgi/ifcgi60.exe?
form=myform.fmx&userid=&otherparams=useSDI=yes&
lookAndFeel=generic&colorScheme=teal
then the error returned in the webbrowser is
'REP-3002: Error initializing printer. Please make sure a printer is installed.'
if parameter 'DESTYPE' is set to 'SCREEN' then it works very well, I can print by clicking the print icon.
Please can someone help me.
Best Regards,
Carl Willems.
[email protected]<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by aapmens ():
Hello,
This is my configuraton:
Computer 1 : nt4, sp3, installed: Oracledatabase 7.3.4
Computer 2 : nt4, sp3, installed: Oracle WebDb, forms 6i 6.0.8.8.0, formserver 6i and reports 6i 6.0.8.8.3.
Services WebDb and Listener are running.
I've connected an HP LaserJet III to the parallel port of computer 2. In the printer
control panel of NT4, this printer is set as the 'default' printer.
'myform.fmx' is a simple form.
The code consists only of a 'when-button-pressed' trigger as follows:
declare
pl paramlist;Ln varchar(15) :='Elsa';
BEGIN
pl :=get_parameter_list(Ln);
if not id_null(pl) then destroy_parameter_list(pl);end if;
pl :=create_parameter_list('Elsa');
add_parameter(pl,'DESTYPE', text_parameter,'PRINTER');
run_product(REPORTS,'C:\ORANT\REPORT60\myrep.rep',1,BATCH,FILESYSTEM,pl);
destroy_parameter_list(pl);
END;
'myrep.rep' is a simple report, consisting of:
select user from dual;
generated by the wizard.
When I run the form in preview for the web in formbuilder 6i, then it works very well,
it prints my report.
But when I run it from the cgi 'ifcgi60.exe' by the command
start -> programs -> oracle forms 6i -> run a form on the web
it returns
http://pent2.easyware.be/dev60cgi/ifcgi60.exe?
form=myform.fmx&userid=&otherparams=useSDI=yes&
lookAndFeel=generic&colorScheme=teal
then the error returned in the webbrowser is
'REP-3002: Error initializing printer. Please make sure a printer is installed.'
if parameter 'DESTYPE' is set to 'SCREEN' then it works very well, I can print by clicking the print icon.
Please can someone help me.
Best Regards,
Carl Willems.
[email protected]<HR></BLOCKQUOTE>
null -
Parameter Form not calling the Main report - Gives REP-0110, REP-1070, REP-0110 error
I am using run_report_object to call a report in which the user has to input some paramters. I have followed the instructions as in the Oracle White paper document on Forms/Reports integration.
The paramter report does come up but when I hit the submit button, I get an error
REP-0110: Unable to open file 'rclug005'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file 'rclug005
I've checked the privileges and everything's fine on that front. Also, I can get to open the report with the web.show document built-in with paramform setting = No.
I am guessing something's wrong with the html constructed in the parameter form which is,
<form method=post action="http://myserver/dev60cgi/RWCGI60.EXE?">
<input name="hidden_run_parameters" type=hidden value="server=myserver &report=rclug005&destype=Cache&desformat=html&userid=uid/pwd@test">
In the Report Before Form trigger, I've copied the foll. html code from the Oracle White paper,
vc_parameter_form :=
'<html><body bgclor="ffffff"><form method=post action="'||:p_action||'">'||
'<input name="hidden_run_parameters" type=hidden
value= "'||vc_hidden_runtime_values||'">'||'<center><p>
<table border=0 cellspacing=0 cellpadding=0><tr><td>
<input type=submit></td><td> width=15
<td><input type=reset></td></tr></table><p><hr></p>';
I've set the :p_action parameter to a value of http://myserver/dev60cgi/RWCGI60.EXE?
Also, In the end of the report before form trigger I added this
srw.set_before_form_html(srw.text_escape, vc_parameter_form);
Any help/tips is appreciated & Thanks.Thanks Danny,
I am building the variable exactly as in the White paper in the "before form" trigger using exactly the same values give there.
vc_hidden_runtime_values := 'server='||:p_servername||'&report='||vc_report_name||'.rep&destype='||:destype||'&desformat='||:desformat||'&userid='||:p_userinfo;
My report has some extra parameters too it expects. So do I have to include the names of those parameters too in the string above?
For example, in my report a user parameter is named 'print_date', which I do see and populate with value in the parameter form, then do I have to build that in the vc_hidden_runtime_values string above.
I am using Report 6.0.8.11.3 on 9iAS. -
Hi Folks, hi Oracle,
we have some serious problems here with Oracle Reports 6i Patch 6 which is running under Red Hat HA (Red Hat 6.2.2 High Aviability Server 1.0, based on Zoot)
Because HA installs without X i have installed all needed X-packes to get a X11 system, and it runs fine.
Then i set up request for a reports from the console i get the following message:
[oracle@webserver1-do bin]$ ./rwcli60 REPORT=xxxx.rdf USERID=xxxxx/xxxxx@xxxx SERVER=xxxxx DESTYPE=SYSOUT DESFORMAT=PDF benu_id=x masszeile=xxx
REP-0177: Error while running in remote server
REP-3000: Internal error starting Oracle Toolkit.
REP-3000: Internal error starting Oracle Toolkit.
If i change the DISPLAY to a faked adress, i become the 111-errors (cant connect to X11-Socket), so i think the repserver connects to X but have some other problems with X.
If i change DISPLAY to an another Linux-Server with fully installed X11 & KDE, the report runs fine.
And all the same if the call the report over apache.
I have read the Bug-Info about Bug 1108326, but i have the same, if i change the format to HTML.
Any suggestions?
H.-C.G|rsoy
nullhello,
be aware, that you have to set the display in the environtment of the server (meaning the startup-script of the server).
regards,
the oracle reports team
Maybe you are looking for
-
Hiya , ive had my Gorgious white macbook for 6 months now ... this week i am getting the caseing replaced due to the staining problem , . i was wondering could i ask for the caseing to be replaced as black not white ? ... would be usefull if they cou
-
how can i open a downloaded mp4 file that is zipped? Witch will not open. And, Convert that mp4 to play on my iMac with Maverick osx ? I there an app or apps i need to buy ?
-
Hi Folks: I am trying to connect to the database and keep getting a 500 internal server error. here is the setup Database server -- mysql 4.1 (linux) on a gentoo linux server -- IP 192.168.0.10 -- srvdb-01 Webserver - Apache2 + PHP 5 on Gentoo Linux
-
Buying a new iphone with a contract and using current 3g sim card for it.
I have the iphone 3g and recently my screen got cracked. Is it possible to just buy another iphone from a Apple store and put my sim card into the new phone? I'm not too sure if they allow you to just buy the phone without the whole contract thingie.
-
Adobe Muse Bildlaufeffekte willkürlich, nicht nachvollziehbar
Mein Problem mit Adobe Muse ist folgendes: Ich möchte 5 Zeilen Text mit dem Bildlauf (Bewegung und Deckkraft) animieren das Zeile für Zeile eingeblendet wird, an die vorhergesehene Position rückt und bei voller Deckkraft stehen bleibt. jetzt sieht da