REP-1849: Failed while printing : Problem while printing on network printer

I am getting this error message while printing the report on Network Printer.
"REP-1849: Failed while printing"
Reports Server is not installed on my machine.
On shared printer, it has no problems.
Platform is Win2000. Report Builder 6.0.8.11.3
Plz help !
Thanks in advance !

Try the following if your printer is a network printer
1. Add Printers - select Local Printer
2. In the Add Printer wizard, select "create a new port" option and select "TCP/IP" as type
3. Write the IP address of the network printer in the "Add standard TCP/IP Printer Port wizard". The port name becomes IP_<ip addr>. Click Next.
4. Select the printer and printer type in "Add Printer" wizard.
5. Select a driver and Write a printer name. This completes the setup. Use this printer name to print from Oracle reports.
Hope this helps..
Yogesh
I am getting this error message while printing the report on Network Printer.
"REP-1849: Failed while printing"
Reports Server is not installed on my machine.
On shared printer, it has no problems.
Platform is Win2000. Report Builder 6.0.8.11.3
Plz help !
Thanks in advance !

Similar Messages

Xerox workcentre 7225 print driver fails while searching for networked printer

HelloJoe,Thanks - So I took those steps and the printer is created as a local printer using a TCP/IP port with the proper IP address for that printer. It appears I can get to its property pages. But when I try to print, the job goes to the queue and it just hangs eventually timing out and it shows error for printing that document... I can ping the IP adddress from the PC and it returns pings. ?

This unit is working fine from several other PCs, WIN 7 and WIN XP, in the building. Installing on a WIN7 64 bit PC. During the installation it starts to look for the networked printer and stops, posting the message - [ Xerox windows common installer has stopped ] , then installer just hangs. I have uninstalled and tried the following versions with the same error - Date: 2 Jun, 2014Version: 5.351.8.0.0Size: 17.7 MBFormat: EXEand tried Global Print driver Date: 15 Dec, 2014Version: 5.404.8.0Format: WWW NOTE - I even tried a manual driver installation which appears to work but the printer fails to print - returning a print error and cancels the job. Help,Jim

Problem generating report ouput to a file -REP0069 REP57054 REP 1849

hi,
I am working with oracle reports builder (9i). i hv created some reports.While trying to get the report in a file(.txt) by using "File->generate to file" ,i am not able to generate...
i get error msgs as shown below...
rep 0069 - internal error whil generating report
REP-57054: In-proccess job terminated.
rep 1849 - Failed while printing
this poblem occurs only with the newly created reports(today n yesterday)...my old reports are running correctly....tats i am able to generate to file...Pls help me in this regard...
Thanks in advance...

Thank you for the reply. I'm trying to download the patch, but I can't seem to find it. I assume this is a patch for the Reports Developer, correct? I did a search on bug 2490826 in Metalink and I haven't been able to find it. If you have the number of the patch you're referring to, please let me know.
Thank You,
Adina

REP-1849 HELP! Reports 6i runtime error message REP-1849

Running Reports runtime 6 on Windows 2000 server.
Printing to either printer from Notebook, prints OK.
Printing to network HP LaserJet 8150 PL 6, all is OK
Printing to network HP LaserJet 5Si MX this happens:
The end of the trace log:
13:45:11 APP ... ) Group G_1
13:45:11 APP ... ( Group G_2 Local Break:
2 Global Break: 2
13:45:11 APP ... ) Group G_2
13:45:11 APP .. ) Repeating Frame R_2
13:45:11 APP . ) Frame M_2_GRPFR
13:45:11 APP ) Frame
13:45:13 ERR REP-1849: Failed while printing.
This error message is not detailed so that the problem can be
figured out. I assume it is a driver problem....
Any help Please? Project is stopped dead for this portion...
Thank you in advance..
Les Briesemeister

We have set the DESFORMAT variable to DFLT but we are getting the same error. When we click in Choose Printer in rw60bld we get the error REP-3002 (Error initializing printer. Please make sure a printer is installed) and when we try to run the command: rwrun60 we get the error:REP-0713: Invalid printer name 'fuenla" specified by parameter where fuenla is the name of the printer.
Thank you very much in advance

My Acrobat 8 Pro is failing to print to a pdf from multiple software. I get an error message that a repair fixes but only for a little while. Pretty soon the trial version of 9 that I installed pops up telling me it has expired but it would take me to a

My Acrobat 8 Pro is failing to print to a pdf from multiple software. I get an error message that a repair fixes but only for a little while. Pretty soon the trial version of 9 that I installed pops up telling me it has expired but it would take me to a way to buy a valid serial number and then 8 stops working again. I’d be happy if the 8 I paid for worked right or I could get 9 for a small cost but I cannot afford $450 or $20/month. I need a permanent solution that I should be already paid for with 8 pro.

After multiple repair procedures with reboot in AA8 I was eventually able to restore the printing to pdf function from various software. However I have again lost my Acrobat tab in Outlook 2007. I need that back, but today an even bigger problem arose. AA8 has stopped printing to fax. It faxes a blank page. The only fax printing option is “Microsoft Shared Fax Driver”. My fax software is “Windows Fax and Scan” and it was working fine just a couple weeks ago. My OS is Windows 7 Professional.
I have tried doing the updates you referred to but I get error messages like these:
“No qualifying products found to apply this update, or update has been already applied”
or
“The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing , or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch.”

Printer problem Canon MP170 "Failed to print document" error

I have a Canon PIXMA MP 170 printer connected to the airport express via USB.
I get the error failed to print document
I pinged the IP address and it is okay. I used Bonjour and Windows to configure printer and both do not work.
I can connect to my sterio with itunes to listen to music.
I asssume it must be with my printer driver are there any solutions for this problem?
Thank you.

Possibilities:
1. Your Acrobat and OS are not compatible (you did not indicate either). It may be you had an install that was working marginally and the update from MS did it in.
2. AcroTray is not running. Try printing to the Adobe PDF printer with the print-to-file selected. Then open the file in Distiller to create the PDF. If that works, check for AcroTray in the tasks list.
3. Do a Repair of Acrobat. Sometimes the windows updates seems to cause problems and a repair is needed.

Struts redeploy problem: failed while destroying filter

I've deployed a webapp with struts2 on weblogic 8.1/java 1.4.1_02 from a war file. It works fine, but when I make a redeploy it throws an exception with the following two stack traces. The NoClassDefFoundError seems strange to me, because the two jars struts2-core.jar and backpost-util-concurrent.jar (for retrotranslation of struts2) contain the classes correctly.
Thanks for any help.
<Failed while destroying filter: struts2.java.lang.NoClassDefFoundError: org/apache/struts2/util/ObjectFactoryDestroyable
at org.apache.struts2.dispatcher.Dispatcher.cleanup(Dispatcher.java:260)
at org.apache.struts2.dispatcher.FilterDispatcher.destroy(FilterDispatcher.java:221)
at weblogic.servlet.internal.WebAppServletContext$FilterDestroyAction.run(WebAppServletContext.java:6394)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.destroyFilters(WebAppServletContext.java:5786)
at weblogic.servlet.internal.WebAppServletContext.destroy(WebAppServletContext.java:5682)
at weblogic.servlet.internal.ServletContextManager.removeContext(ServletContextManager.java:188)
at weblogic.servlet.internal.HttpServer.unloadWebApp(HttpServer.java:740)
at weblogic.servlet.internal.WebAppModule.destroyContexts(WebAppModule.java:767)
at weblogic.servlet.internal.WebAppModule.rollback(WebAppModule.java:745)
at weblogic.j2ee.J2EEApplicationContainer.rollbackModule(J2EEApplicationContainer.java:3057)
at weblogic.j2ee.J2EEApplicationContainer.rectifyClassLoaders(J2EEApplicationContainer.java:1429)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1176)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1031)
at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2602)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2552)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2474)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:798)
at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:507)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:465)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
>
<Failed while destroying filter: struts2.java.lang.NoClassDefFoundError: edu/emory/mathcs/backport/java/util/Arrays
at edu.emory.mathcs.backport.java.util.concurrent.CopyOnWriteArrayList.toArray(CopyOnWriteArrayList.java:99)
at edu.emory.mathcs.backport.java.util.concurrent.CopyOnWriteArrayList.<init>(CopyOnWriteArrayList.java:35)
at com.opensymphony.xwork2.config.ConfigurationManager.setConfigurationProviders(ConfigurationManager.java:100)
at com.opensymphony.xwork2.config.ConfigurationManager.destroyConfiguration(ConfigurationManager.java:141)
at org.apache.struts2.dispatcher.Dispatcher.cleanup(Dispatcher.java:283)
at org.apache.struts2.dispatcher.FilterDispatcher.destroy(FilterDispatcher.java:221)
at weblogic.servlet.internal.WebAppServletContext$FilterDestroyAction.run(WebAppServletContext.java:6394)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.destroyFilters(WebAppServletContext.java:5786)
at weblogic.servlet.internal.WebAppServletContext.destroy(WebAppServletContext.java:5682)
at weblogic.servlet.internal.ServletContextManager.removeContext(ServletContextManager.java:188)
at weblogic.servlet.internal.HttpServer.unloadWebApp(HttpServer.java:740)
at weblogic.servlet.internal.WebAppModule.destroyContexts(WebAppModule.java:767)
at weblogic.servlet.internal.WebAppModule.rollback(WebAppModule.java:745)
at weblogic.j2ee.J2EEApplicationContainer.rollbackModule(J2EEApplicationContainer.java:3057)
at weblogic.j2ee.J2EEApplicationContainer.rectifyClassLoaders(J2EEApplicationContainer.java:1429)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1176)
at weblogic.j2ee.J2EEApplicationContainer.prepare(J2EEApplicationContainer.java:1031)
at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer(SlaveDeployer.java:2602)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer(SlaveDeployer.java:2552)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare(SlaveDeployer.java:2474)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(SlaveDeployer.java:798)
at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(SlaveDeployer.java:507)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(SlaveDeployer.java:465)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(SlaveCallbackHandler.java:25)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
>

I had similar problem a while ago. The remedy I had at that time is placing the jar files containing the classes in the "global" classpath to BEA servers, not just put them in the directories that only available for one particular web application. It's a working solution. I am sure there's other way to fix it. My guess is that the security manager for individual applications is setup more strictly. However, I haven't really been able to verify that.

CrystalReport - Getting "The Report Application Server failed" while export

Hi Experts,
I am using Crystal Reports 2008 in my ASP.NET application to generate reports. Everythings works fine in the development environment. When I deploy it on my Windows Server 2003 system, I get an error "The Report Application Server failed" while exporting the report from the report control. But, the report assuch is working fine even in the production environement. I experience this issue only while exporting to excel or anyother format.
Do I need to configure anything or any settings needs to be turned on in the .rpt files!!
Appreciate any help to get this issue resolved.
TIA,
Prem

First a confirmation. When you say; "...exporting the report from the report control...", you mean the printer button on the viewer?
Questions;
What version of .NET?
What Crystal Reports Service Pack are you on?
How was the CR runtime installed on the server?\
Can you print the report OK?
Are you using sessions?
Ludek

HP 1300 printer fails to print certain PDF documents with OSX 10.7.5.

HP 1300 printer fails to print certain PDF documents with OSX 10.7.5.

I solved this through the phone call help ( which cost me $25 ...) - there was some name colusion in the printer name - the rep basicallt uninstalled everything, did hard resent to all devices - printer, router and Mac, then installed the printer again under new name , seems to solve the problem .

Adobe Acrobat Pro failed to print pdf file

I downloaded adobe acrobat pro and started the 30 trial version just a few minutes ago.
I could open files through adobe acrobat and convert word files to pdf, but when i tried converting a publisher file it could not go through. An error popped up which read "Adobe PDF printer failed to print pdf file".
The publisher file I am hoping to convert to pdf is a 21 page panorama article. It contains lots of images and a variety of font types.
I do not know other alternatives for solving this issue.
Your help will be very much appreciated.
Thank you!
Erik

It seems to be that Adobe Acrobat virtual printer is not properly installed on your PC or you are not selecting Adobe PDF printer to print PDF document. Checkout the below screen shot to see proper printer.
After trying this if you have same problem you may trt some other virtual printer that easily convert or print any file as PDF, you may checkout here.

Process chain failing while executing DTP

Hi All,
My process chain is failing while executing DTP.
Error i got is: OBJECTS_OBJREF_NOT_ASSIGNED
Access not possible using 'NULL' object reference.
The dump is occuring in method : GET_FIELD_LIST_INBOUND
TRY.
      CALL METHOD cl_rstran_model=>factory
        EXPORTING
          i_tranid = i_tranid
        RECEIVING
          r_r_model = l_r_model.
    CATCH cx_rstran_exception.
      RAISE EXCEPTION TYPE cx_rs_step_failed
ENDTRY.
From SDN , i am quite sure that its a SAP problem and needs to apply some Note.
Could anyone please tell me, which note i should apply ?
Thanks.

Hi,
check the note note 1081884 it may help you ..
check link ..
/message/2817339#2817339 [original link is broken]
Reagrds,
Shikha
Edited by: Shikha Goel on Oct 10, 2008 6:21 AM

HP Laserjet 6MP fails to print with parallel-to-USB converter cable

I have a LaserJet 6 MP parallel printer which I was using in 10.3.9 with a parallel-to-USB converter cable. The Printer Utility saw it natively as a USB device and it printed just fine most of the time, although it would occasionally fail to print, so I installed a different driver called usbtb 1.0.15, and after that it printed very reliably.
Now I've upgraded to 10.4.9, and the Printer Utility still detects the HP printer natively as a USB device, and I also installed the formerly-reliable usbtb driver again, but the printer now fails to print with either driver. It acts like it's going to, but then it quits.
When I choose Print, all the features of the printer are shown, and I can select which tray to take paper from etc., and the printer dialogue box says "Printing," the activity light on the printer flashes just as it always does when printing is in progress, but then, instead of printing, the activity light stops flashing and the print job disappears from the dialogue box.
Can anyone tell my why this printer is failing to print now, and how I might be able to get it working again?
Thanks,
Tom

Wait a minute! It's only certain Indesign documents that won't print.
All TextEdit docs will print.
I created a few scribbles in Photoshop and they print.
But with InDesign, there is no predicting which documents will print or will not print. On some that will not print, if I remove all but one text box, then they will print. On other documents that do print, if I copy some text off of one that won't print and paste it in, then that one stops printing too.
On some that won't print, if I erase everything on the page and create a new text box and type a few words into it, the page will print. If I revert to the previously saved version, once again the page won't print.
What kind of craziness is this, anyway? It seems random. I can't figure it out.
Even on the documents that won't print, when I try to print them the printer's activity light blinks as though it is just about to print, but then the light goes out without printing.
Anybody got any ideas what this problem is and how to fix it?
All I know is that EVERYTHING printed before I upgraded from 10.3.9 to 10.4.9.
Tom

HP Color LaserJet 1515n fails to print

HP Color LaserJet 1515n fails to print
I had this printer just 13 months, and it has stopped working without giving any kind of error code.
I ran my black down to 1% using override - and then nothing. The printer accepts jobs and appears to do everything up to the point when it should start feeding paper through the printer transport.
I changed the black toner, but it made no difference.
To avoid complex print driver problems I have been using a simple txt file with 'hello world' for testing.
Having reinstalled the drivers.
I have done a very extensive web search, I cannot find any appropriate help.
I took the side off the machine to reveal the electronics, and tested all the connections etc, but cannot find anything obviously wrong.
The transport mechanism seems ok, because the manual feed slot accepts paper and pulls it in, but then goes no further, ie to actually start printing.
The calibration process seems ok, and all the 4 color cartridges seem ok, and the spindles on them obviously turn having marked them to see if any were stuck.
As there is no error code in the log file, I cannot see what is wrong.
Does anybody have any idea what is wrong? Are there and tools that can be used to interrogate the printer further?

Wait a minute! It's only certain Indesign documents that won't print.
All TextEdit docs will print.
I created a few scribbles in Photoshop and they print.
But with InDesign, there is no predicting which documents will print or will not print. On some that will not print, if I remove all but one text box, then they will print. On other documents that do print, if I copy some text off of one that won't print and paste it in, then that one stops printing too.
On some that won't print, if I erase everything on the page and create a new text box and type a few words into it, the page will print. If I revert to the previously saved version, once again the page won't print.
What kind of craziness is this, anyway? It seems random. I can't figure it out.
Even on the documents that won't print, when I try to print them the printer's activity light blinks as though it is just about to print, but then the light goes out without printing.
Anybody got any ideas what this problem is and how to fix it?
All I know is that EVERYTHING printed before I upgraded from 10.3.9 to 10.4.9.
Tom

Why should Adobe Reader fail to print because of settings in the Edit/Preferences?

AdobeReaderDocumentCouldNotPrint.txt
Glyn Price Tue 17 March 2015
Why should Adobe Reader fail to print because of settings
in the Edit/Preference?
Adobe Reader XI Version 11.0.10
MS Window 7
File > Print > Print
I got the error message:
The document could not be printed
I googled this error message and used the following
solution that worked i.e. it then printed successfully.
Edit > Preferences
Category: Security(Enhancement) 'Enable Protected Mode at Startup'
It was checked, changed it to unchecked.
Category: Documents 'View documents in PDF/Mode'
It was set to 'Only for PDF/A'
Set it to 'Never'
Exited Adobe Reader and restart it. Then it printed.
I had a look on another computer system (Adobe Reader XI Version 11.0.10
and MS Window 7) and on this different computer I could print
without doing the above two changes.
I'm a bit puzzled. Why preferences on one system were not
needed on a different system?

Here is an elaborate method of troubleshooting this problem. There may be a simpler method if anybody wants to suggest one.
There is a general technique that is helpful in this situation. I can't give you complete instructions here, and I haven't tested this with regard to bluetooth devices, but here's the gist of it.
Create a second log-on account for your music projects. Configure it so that when you log in to the new music account, the drivers needed for the Bluetooth devices don't load. You do this in System Preferences: Accounts.
When it's time to do music, log out of your usual account and onto the new one.
When you install drivers for any peripheral, you have the option of installing them "for all users" or only for the user account that is active during the installation.
This governs whether the drivers go in root/library or root/Users/your name/library.
If drivers are in root/library, they will load whenever the Mac is booted up and will run for all users.
But if drivers are loaded in root/Users/your name/library, they will only load if you log in as "your name". If you have a second account called root/Users/music account/, and you log in under that, the drivers in "your name" will not load. Get it?
To get this working right you need to be knowledgeable about moving or deleting files in the /library/ directory and subdirectories, and you need to be careful because you can unwittingly cause some damage if you are not careful.
There is also the root/System/library directory, and in general you should never mess around with anything in there or you might hose your system.
In summary, I would start by using the installer programs for your BlueTooth devices and DE-installing all drivers. Reboot. Log back in as your usual user account. Then RE-install each driver and see if the installer program gives you the OPTION to installl for all users or just for this user. Choose the latter. Then log on to your new Music account and see if the problems go away.

Some text in PDF fails to print -- document originally created with InDesign

Hello. Thanks in advance for your help.
I joined Creative Cloud a few days ago, and dowloaded several CS6 programs -- InDesign, Illustrator, Photoshop and Acrobat XI Pro. My operating system is Windows 7.
I created a simple order form using InDesign, and it prints perfectly directly from the InDesign platform. After creating a PDF by selecting Adobe PDF as the printer, the resulting PDF looks perfect on screen when viewed in Acrobat XI Pro. However, when printing from Acrobat to a paper-and-ink printer, chunks of the text go missing. Two other people who were emailed the PDF of this document have experienced the same problem, with the same chunks of text failing to print.
Since it prints perfectly from InDesign, I am guessing the problem lies somewhere on the Acrobat side of the equation. Since the same problem has occured with several different printers, I am assuming it's not a problem with my particular printer.
I have already tried unchecking the "Rely on system fonts only; do not use document fonts" option in the Adobe PDF printing preferences, and that did not fix it. I didn't expect that was the problem, since the rest of the type prints perfectly.
I would like to attach two PDFs and/or the original InDesign document, but I cannot find an attachment option on the interface for this discussion page. I would be happy to email them to anyone who would like to take a look at them.
As usual, I am working on a deadline and would very much appreciate any help you can give me.
Thank you!

YES! A SOLUTION!
Thanks to an Adobe user who goes by "Test Screen Name" for this solution!
DO NOT print to PDF from InDesign to create a PDF. Instead, use the Export function.
I followed that advice, and it solved the problem. Hope this helps you, JuleeBruce!

REP-1849: Failed while printing : Problem while printing on network printer

Similar Messages

Maybe you are looking for