REP-1849 HELP! Reports 6i runtime error message REP-1849

Running Reports runtime 6 on Windows 2000 server.
Printing to either printer from Notebook, prints OK.
Printing to network HP LaserJet 8150 PL 6, all is OK
Printing to network HP LaserJet 5Si MX this happens:
The end of the trace log:
13:45:11 APP ... ) Group G_1
13:45:11 APP ... ( Group G_2 Local Break:
2 Global Break: 2
13:45:11 APP ... ) Group G_2
13:45:11 APP .. ) Repeating Frame R_2
13:45:11 APP . ) Frame M_2_GRPFR
13:45:11 APP ) Frame
13:45:13 ERR REP-1849: Failed while printing.
This error message is not detailed so that the problem can be
figured out. I assume it is a driver problem....
Any help Please? Project is stopped dead for this portion...
Thank you in advance..
Les Briesemeister

We have set the DESFORMAT variable to DFLT but we are getting the same error. When we click in Choose Printer in rw60bld we get the error REP-3002 (Error initializing printer. Please make sure a printer is installed) and when we try to run the command: rwrun60 we get the error:REP-0713: Invalid printer name 'fuenla" specified by parameter where fuenla is the name of the printer.
Thank you very much in advance

Similar Messages

SSRS 2008 Created Commssion Report, now getting error message when I run this ( need Help)

in SSRS 2008 2 years ago created Commission with sub reports added, it was working fine, some how started to get error
message when we entered some invoice # see below screen shot of error message
but same time if I enter different invoice # it process the report without any error message , donot understand the problem
what's causing this issue, I have looked each sub report,
can some one suggest any idea,
I have spent hrs to figure it out, no luck so far.
thanks in advance
see the 2nd screen shot with report process
any help will be greatly appreciated

Hi Wendy
thanks for your reply
I tried creating new report , I have 1 main report and 3 sub report on this
on main report when I enter some invoice# and accountnum data shows up with no problem,
but same time if I enter different invoice# and accountnum , there is no data return on same query, I have checked my query so many times, donot understand this issue, what's causing this problem, since all the data pulling from same tables, why its
not pulling for some invoices,
other strange thing , I created this report , year ago, there was no problem until now,
all of the sudden this problem just shows up,'
I am not that expert in sql , can I really use advise
see below by query , if you can tell me what's wrong with my query I will be really greatfull I have spend so much time to figure it out, but so far no luck
SELECT        VENDTRANS.DATAAREAID, SALESTABLE.SALESID, VENDTRANS.VOUCHER, SALESTABLE.SALESTYPE, SALESTABLE.SALESSTATUS, VENDTRANS.TRANSDATE,
                         CUSTINVOICEJOUR.INVOICEAMOUNT, VENDTRANS.INVOICE, VENDTRANS.PAYMMODE, VENDTRANS.ACCOUNTNUM, VENDTRANS.TRANSTYPE,
                         VENDTRANS.LASTSETTLEVOUCHER, VENDTRANS.TXT, CUSTINVOICEJOUR.INVOICEACCOUNT, CUSTINVOICEJOUR.INVOICINGNAME,
                         VENDTRANS.LASTSETTLEDATE, LEDGERJOURNALTRANS.ACCOUNTTYPE, LEDGERJOURNALTRANS.AMOUNTCURCREDIT, LEDGERJOURNALTRANS.LINENUM,
                         CUSTINVOICETRANS.INVOICEDATE
FROM            SALESTABLE INNER JOIN
                         CUSTINVOICETRANS ON SALESTABLE.DATAAREAID = CUSTINVOICETRANS.DATAAREAID AND SALESTABLE.SALESID = CUSTINVOICETRANS.SALESID
INNER JOIN
                         CUSTINVOICEJOUR ON CUSTINVOICETRANS.INVOICEID = CUSTINVOICEJOUR.INVOICEID AND CUSTINVOICETRANS.SALESID = CUSTINVOICEJOUR.SALESID
AND
                         CUSTINVOICETRANS.INVOICEDATE = CUSTINVOICEJOUR.INVOICEDATE INNER JOIN
                         VENDTRANS ON CUSTINVOICETRANS.INVOICEID = VENDTRANS.INVOICE AND CUSTINVOICETRANS.DATAAREAID = VENDTRANS.DATAAREAID
AND
                         CUSTINVOICEJOUR.DATAAREAID = VENDTRANS.DATAAREAID AND CUSTINVOICEJOUR.INVOICEDATE = VENDTRANS.TRANSDATE INNER JOIN
                         LEDGERJOURNALTRANS ON VENDTRANS.DATAAREAID = LEDGERJOURNALTRANS.DATAAREAID AND
                         VENDTRANS.ACCOUNTNUM = LEDGERJOURNALTRANS.ACCOUNTNUM AND CUSTINVOICETRANS.LINENUM = LEDGERJOURNALTRANS.LINENUM AND
                         VENDTRANS.INVOICE = LEDGERJOURNALTRANS.INVOICE AND VENDTRANS.VOUCHER = LEDGERJOURNALTRANS.VOUCHER AND
                         VENDTRANS.PAYMMODE = LEDGERJOURNALTRANS.PAYMMODE AND VENDTRANS.TRANSDATE = LEDGERJOURNALTRANS.TRANSDATE
WHERE        (VENDTRANS.DATAAREAID = N'AR1') AND (SALESTABLE.SALESTYPE = 3) AND (SALESTABLE.SALESSTATUS = 3) AND (VENDTRANS.ACCOUNTNUM = @Accountnum)
                         AND (VENDTRANS.INVOICE = @Invoice) AND (LEDGERJOURNALTRANS.ACCOUNTTYPE = 2)

"Importer reported a generic error" message while importing ProRes 422 clip

Hi all. I am getting an "Importer reported a generic error" message when I try to import a ProRes 422, linear PCM clip into Premiere Pro CS6. I have imported other ProRes 422 clips in previous projects without a problem, although those clips did not have the linear PCM codec included. I have tried to solve the problem using advice on other forum threads. Changing the file name did not work. Removing underscores in the file name did not work either. Copying the file and pasting to a different folder before re-importing did not work either. The file DOES open in AE, but I am getting the error message without fail when I try to import into Premiere. Any thoughts on how to remedy the situation? FYI - I am still running version 6.0.0 of Premiere. Thanks for your help!

Try going to Help | Deactivate in Pr. Close Pr. Reboot. Launch Pr and activate if requested. That procedure has helped some users restore missing codecs and presets, maybe it'll help your Dynamic Link.
Jeff

Persistent but Inconsistent iTunes Runtime Error Message...

A while ago, I started getting a runtime error message when I'd open iTunes.
"Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\Program Files\iTunes\iTunes.exe
This application has requested the Runtime to terminate in an unusual way."
The odd thing is sometimes it doesn't happen. Or, if it does, I found by opening the application a few times I'd be able to get back into iTunes without the error message popping up.
I am running Windows XP with service pack 2 which is up to date.
Additionally, I have Norton System Works which scans the hard drive once a week and cleans up files.
Is there a simple and painless way I solve this problem?
Can anyone help?

followed the excellent instructions from turingtest2, london, uk message of 1-31-2014. everything is working perfectly. .

REP-56071: Security check failed with error message: Error code30009 - Gene

REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
Hello,
I am also receiving the above error - these reports are deployed on our Portal - to which all registered SSO users should have access to.
one more thing...
We obtain the error only when execute under some "load", example: 15 reports running simultaneously.
Tx,
Diego.

I am also facing this problem - I've deployed the reports on the Portal and authenticated users can access the reports.
The problem is that when any authenticated user tries to access the report, on his very first access this error is shown.
REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
But after the user click on the Personalize link of the portlet and specify the parameters values(which are empty initially) then report runs fine.
Plz let me know the solution as no user will like to see this error message for the first time he opens the report.
Regards.

RUNTIME ERROR MESSAGE R6034

Hello, I'I've just tried taking the latest itunes update, and it failed now I get runtime error message R6034. Would you please help me!!
Thank you!

followed the excellent instructions from turingtest2, london, uk message of 1-31-2014. everything is working perfectly. .

Runtime Error Messages

In CS3 when I hit Browse I am kept from entering Bridge by a runtime error message. How do I correct for this?

My advise to you is checking Post-xxx triggers. Maybe there are some settings of values there. I had the same problem in my form with tabpages. I had to change Post-Record trigger:
BEGIN
**** this was added
IF :SYSTEM.Record_Status='INSERT' THEN
settings
END IF;
END;
Without this testing " IF :SYSTEM.Record_Status='INSERT' THEN
" though I had done nothing messages were the same as yours. Forms created a new record when navigating to new block on the second tabpage ...
I hope this will help you
Helena

REP-56071:Security check failed with error message:No privilege to do oper

Hi
I get the following error when I try to see the job status (..../rwservlet/showjobs?)
REP-56071: Security check failed with error message: No privilege to do the operation
I also get the following error on running any report on this server:
REP-110: Unable to open file 'Test.rdf'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file 'Test.rdf'.
Anyone seen the same issue before?

Fugured it out - had issues with reportserver.conf file.
_*

REP-56071: Security check failed with error message

Hi!
We have an Oracle 9iAS R2 v9.0.2.2 installation on Linux (Red Hat Advanced Server 2.1). We have installed PatchSet 2703110, 2581587 and 2842923.
Oracle9i Reports version is: 9.0.2.2.0
iAS and Infrastructure are on separate hosts.
Trying to run Reports demo test.jsp or test.rdf we get the following message:
javax.servlet.jsp.JspException: REP-56071: Security check failed with error message: Error code30001 - Cannot access the server:rep_dkipcias
In package:wwv_rw_usr function:security_check
Command line is: server=rep_dkipcias report=/repdemo/examples/Tools/test.jsp rundate="29-MAY-03 09:05:01"
Found on Metalink the following Note: 216847.1
This recommends to comment out the security and destination tags in ORACLE_MIDDLETIER_HOME/report/conf/<repserver>.conf file
After commenting them out reports works fine.
BUT
at the end of the note there is a note which states that "Commenting out the security tag removes the integration of the reports server and portal."
We need reports integration with Portal. We need SSO as well.
Could you give any workaround for this problem?
PS.: I have red Note:213171.1, Note:216118.1, http://otn.oracle.com/products/reports/htdocs/getstart/whitepapers/securing9i.pdf and BUG:2645629
None of them gave any solution for the problem
Thanks in advance,
Andras Weintrauth

Hi Jeff,
Q(1): Yes.
(Report Name and Servers tab)
Report Server: REP_DKIPCIAS
Oracle Reports File Name: test.jsp
Execute: as JSP
(Other tabs)
Default values. Unchanged.
Q(2): (Acces Tab of Report Component)
Publish to Portal = checked
Inherit Privileges from Portal DB Provider = checked
(Acces Tab of Report Server Component)
Inherit Privileges from Portal DB Provider = checked
(SSO User)
The user I try to run the report with has the following group assignments:
Privilege Group
PORTAL_ADMINISTRATORS
PORTAL_DEVELOPERS
DBA
PORTLET_PUBLISHERS
Additional Info:
To be more specific: The mentioned security check failure exists outside of Portal as well. Eg. when we try to run the default portal test examples (test.jsp, test.rdf) from the iAS home page Demonstartions tab.
Thank You in advance,
Andras

Stock variance report Crashes with error code REP-56048

SR : 6990718.992
gtcr : http://qmon.oraclecorp.com/qmon3/quickpicks.pl?t=t&q=6990718.992
Problem Statement : When the user is trying to generate report for Stock variance report from Oracle Retail Merchandising System the report crashes with error code REP-56048.
The steps to reproduce are specific to Oracle Retail Merchandising system application and hence I have not mentioned here.
The REP-56048 error seems to be generic. Could you please advise me on this issue.
Thanks & Regards,
Sameer

You can review the following Oracle Metalink Document;
Comprehensive REP-56048 Troubleshooting and Overview Guide: Doc ID: Note:285281.1
https://metalink.oracle.com/metalink/plsql/f?p=130:14:88153902823984055::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,285281.1,1,1,1,helvetica
Hope it would be useful.
Adith

Just did the iTunes update that iTunes said was available now iTunes won't open, keep getting Runtime Error message. R6034 An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.

Just did the iTunes update that iTunes said was available, now iTunes won't open. I just keep getting a Runtime Error message.
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
Is anyone else having this problem?
I tried to re-install and got the following message: iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114)
Does this mean I have now lost everything?

I just had the same error:
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
I went to http://support.apple.com/kb/ht1925 and did a complete removal and reinstallation of iTunes. You MUST follow the directions here exactly...it's more than just iTunes that must be removed, and it MUST be done in the order in which the support article says. I followed the exact instructions, and iTunes is back on my machine (no more C runtime error) and you do NOT lose your music...it's all in my library, as it was before.
Good luck!

How do I resolve the "Mozilla cannot find runtime" error message when I try to start Firefox?

Mozilla Firefox updated to version 36.0. When I click on the Firefox icon to open it I receive the message: "Mozilla cannot find runtime" I receive the same message if I try to open Firefox by selecting "firefox.exe" from within the Program Files. I subsequently uninstall Mozilla Firefox and reinstall it. It will open and run normally right after the re-installation. Then if I close the program and try to re-open it again, I get the same "Mozilla cannot find runtime" error message.
The only way I can get Firefox to open is if I uninstall and re-install it every time I want to open it after the initial re-installation.

''sage68 [[#answer-700841|said]]''
<blockquote>
Hi Adriel,
The "Mozilla cannot find runtime" problem has returned. It occurs in two situations:
1. When Firefox tries to download updates using "updater.exe" (version 36.0.0.5531), which causes my "Norton Internet Security" program to notify me with the message: "Auto-Protect has removed security risk Suspicious.Cloud.9.B" This message is shown every time "updater.exe" activates.
</blockquote>
I also have experienced this during several upgrades, not just the latest. (I am using Windows XP and Norton Security Suite.) Norton identifies c:\program files\mozilla firefox\updated\xul.dll with the Suspicious.Cloud.9.B virus and removes the file. I can set the Norton installation to accept xul.dll but it would make more sense for a Mozilla expert to contact Norton and work out a permanent solution, for all who are facing this problem.

Recent update download upset my entire itunes program. Can't use to sync iphone, ipad, etc nor run any other updates. Get runtime error message, etc...and contact app support team. Says itunes not installed correctly, pls reinstall. tried to no avail.

A recent update download upset my entire itunes program. Unable to use to sync iphone, ipad, etc nor run any other updates. Get runtime error message, Error 7 (windows error 1114) etc...and contact app support team. Says itunes not installed correctly, pls reinstall. tried to no avail.

First try updating to iTunes 11.1.5.5, using an installer downloaded from the Apple website:
http://www.apple.com/itunes/download/
If you still get the errors after that, try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I have windows vista and I'm receiving a runtime error message R6034 after trying to install latest update of itunes. How do I resolve this issue?

I have windows vista and I'm receiving a runtime error message R6034 after trying to install latest update of itunes. How do I resolve this issue?

The best discussion of resolving the issues is found in the user tip: https://discussions.apple.com/docs/DOC-6562

I got request to download latest ITunes to my PC but when I try I get runtime error message R6034

I received a request to download/install the latest ITunes to my PC but when I try to do so I get runtime error message R6034 and download stops. Please advise what needs to be done.
Thanks

See Troubleshooting issues with iTunes for Windows updates.
tt2

REP-1849 HELP! Reports 6i runtime error message REP-1849

Similar Messages

Maybe you are looking for