REP-1920 Error Message
Our project has reports that fail with the following error message:
REP-1920: Character mode runtime incompatible with
DESFORMAT of PDF, HTML, HTMLCSS, or RTF.
It is not always the same reports that receive the above message, it appears to be random in nature. Indeed, the vast majority of time these reports run with no errors at all. All of a sudden, out of the blue, certain reports (no pattern, it could be any of our reports) will fail with the REP-1920 error message.
To make matters worse, NONE of our reports are in CHARACTER mode. All have an initial value of DEFAULT (i.e. BITMAP). Now we do have one report that generates a CHARACTER report dynamically, by passing a paramter at runtime, but that report (the .rdf) has a DEFAULT mode as well, and is run off of a different report server than all the other reports.
I have scoured the NET and have not found anything that can tell me why we are receiving these error messages. Anybody?
Note: We are running Report Server 6i Patch 10 (6.0.8.19.0) on a Windows 2000 box. Dev Tools are Patch 10 as well.
Thanks
James Walters
Hi James,
We have never heard of this issue before. We can undeerstand the REP error if there is some contradiction in Report request between deformat and the mode. But since you told this happens once in a while, that too randomly, it seems, wrong message is being displayed. I suggest you get in contact with Oracle support on this issue. This need to be looked into.
Thanks,
Rohit
Similar Messages
-
Hi,
Can someone tell me why I am getting this error while runing a report?. the error message is REP-1814: Report cannot be formatted. Object 'vertically' can never fit within 'B_272'.
I don't have any object called 'Vertically' in my report. B_272 is just a text field.
Thanks alot
Kavita.never mind, I figured out that the 'print object on' property of the frame above the current frame is causing this error.
-Kavita. -
I have install Web Reports Server 6i on Solaris 2.8 x_86 platform and i hav configure its above documentation. I can start it under OAS 4.0.7 web listener. Then, if i want to create the test report on the web, i receive an error message:
REP-3000: Internal error starting Oracle Toolkit.
Tell me please, what can i do.You may be right. But in this case i don't know another plase, there nls-support (*.nlb) files are may be installd. In my $ORACLE_HOME there are no directory, naming like datad2k. I think, that Developer 2k use nls-support files from base nls directory, because i install if after RDBMS, but after installation of Developer 2k in the list of installed products i so, that it content the 8.0.6 NLS-Support Files and Libraris. I in the firm belief that it is not RDBMS files, becouse the version of RDBMS is 8.0.5.
It meens, that the cause of REP-3000 error is other. If you know some more about it, tell me please.
null -
I am trying to move a database column value into a placeholder to manipulate later. I get the following error: REP-1276 'Placeholder<name> references one or more non-formula columns'.
Here is the script:
function PH_F_UNB_OBLIGFormula return Number is
begin
:ph_f_unb_oblig := :unb_oblig;
return(:ph_f_unb_oblig);
end;
nullfist of all, inside placeholder object is not allow to insert code, only save values from any function or formula, please test with formula column
I hope, it could be useful for you.
null -
Rep=2103 error message in oracle 10g
Hi After migrating from 6i to 10g I am getting the following msg when I try to generate a report:
rep-2103: column 'cf_street_address' : pl/sql formula returned invalid value or no value
I have the following code in my function:
function CF_street_addressFormula return VARCHAR2 is
begin
return(:address_line_1||' '||:address_line_2||' '||:address_line_3||' '||:address_line_4);
end;
Please help.I'm using Reports 9.0.4.0.19 and I recreated the scenario without any issues. I'm just wondering what would happen if you wrapped the :address_lines in nvl's in case 10g cares.
return(nvl(:address_line_1,' ')||' '||nvl(:address_line_2,' ')||' '||nvl(:address_line_3,' ')||' '||nvl(:address_line_4,' '));
Sorry, I could reproduce the problem.
-mike -
Imported image error - REP-6106: Error in XML Report Definition
I created a report with an image using Insert/Image. I've tried bmp, gif, jpg. The reports works fine so I save it. When I reopen this file, I get the REP-6106 error message "Invalid element 'image' in content of 'repeatingFrame'. expected elements [comments, geometryinfo...etc.....]".
Any ideas?
Thanks,
AlbertThis is a bug, I have filed bug 2546295 to track this.
Thanks for finding this.
-Shaun -
Cannot boot my MacBook Pro. Tryed CMD+R, reinstall OS, error message :damaged HD. When trying to repait it says it's OK. Yesterday HD wasn't even half full when I turned it off, now it says it's full.
What may have happened is an error and a kernel panic, filling up the logfiles.
What I recommend is first to find a way to backup your data without booting the hard drive directly if it isn't already backed up, and then get Alsoft Disk Warrior to repair the hard drive. You'll probably want an external drive from http://www.macsales.com/
And you'll want to go into Hard drive -> Library -> Logs, System -> Library -> Logs, and Users -> yourname -> Library -> Logs to remove whatever you find there.
If after booting it fills up again, start by removing all startup items in your System Preferences for your user, and rebooting in safe mode with the shift key held down. If the hard drive is over 85% full after removing the logfiles, you may want to look at what were the last applications you installed.
Peer2peer software if installed can be as bad as a virus, because it enables others to access your computer. Insecure wireless networks are just as bad, if they are WEP or no encryption and someone is within 1500 feet of your computer.
If no such software is installed, your RAM probably has failed. Run the hardware test that came with your computer, by booting with the 'D' key.
If nothing shows up there, it can still be the RAM. Especially if you've seen any 4 language screens telling you to restart.
Here's more on kernel panics:
http://www.macmaps.com/kernelpanic.html* -
REP-56071: Security check failed with error message: Error code30009 - Gene
REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
Hello,
I am also receiving the above error - these reports are deployed on our Portal - to which all registered SSO users should have access to.
one more thing...
We obtain the error only when execute under some "load", example: 15 reports running simultaneously.
Tx,
Diego.I am also facing this problem - I've deployed the reports on the Portal and authenticated users can access the reports.
The problem is that when any authenticated user tries to access the report, on his very first access this error is shown.
REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
But after the user click on the Personalize link of the portlet and specify the parameters values(which are empty initially) then report runs fine.
Plz let me know the solution as no user will like to see this error message for the first time he opens the report.
Regards. -
Hello:
I am very much a novice with Final Cut. I am trying to import some video files from my desktop but keep getting an error message that says, "File error 1 file recognized, 0 access denied, 1 unknown". The file type is .mov, 35MB, 1920 x 1080, Codec MPEG-2 video linear PCM timecode, color profile HD (1+1+1). Can someone help? Thanks, PaulYou can't import MPEG-2 files directly to FCP X.
Can you play this file in Quicktime Player? If so, then you can use the free program MPEG Streamclip to convert this to Quicktime. Use the ProRes codec. -
REP-1849 HELP! Reports 6i runtime error message REP-1849
Running Reports runtime 6 on Windows 2000 server.
Printing to either printer from Notebook, prints OK.
Printing to network HP LaserJet 8150 PL 6, all is OK
Printing to network HP LaserJet 5Si MX this happens:
The end of the trace log:
13:45:11 APP ... ) Group G_1
13:45:11 APP ... ( Group G_2 Local Break:
2 Global Break: 2
13:45:11 APP ... ) Group G_2
13:45:11 APP .. ) Repeating Frame R_2
13:45:11 APP . ) Frame M_2_GRPFR
13:45:11 APP ) Frame
13:45:13 ERR REP-1849: Failed while printing.
This error message is not detailed so that the problem can be
figured out. I assume it is a driver problem....
Any help Please? Project is stopped dead for this portion...
Thank you in advance..
Les BriesemeisterWe have set the DESFORMAT variable to DFLT but we are getting the same error. When we click in Choose Printer in rw60bld we get the error REP-3002 (Error initializing printer. Please make sure a printer is installed) and when we try to run the command: rwrun60 we get the error:REP-0713: Invalid printer name 'fuenla" specified by parameter where fuenla is the name of the printer.
Thank you very much in advance -
Hi,
I got a error message in Report 6i:
REP-0606: unable to read link file 'I:\0\ABC.JPG'. check link file format.
How do I check the link file format?
Thanks.
JunHi Jun,
This error doesn't come for all JPGs.
You can try the following :
1) Use an Image Editor/Converter to save the file.
In this case, use some Image Editor, and SAVE the file AS the same/or different filename. This should mostly resolve your problem.
2)Load image into OLE item.
Thanks,
Vinod -
REP-56071:Security check failed with error message:No privilege to do oper
Hi
I get the following error when I try to see the job status (..../rwservlet/showjobs?)
REP-56071: Security check failed with error message: No privilege to do the operation
I also get the following error on running any report on this server:
REP-110: Unable to open file 'Test.rdf'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file 'Test.rdf'.
Anyone seen the same issue before?Fugured it out - had issues with reportserver.conf file.
_* -
REP-56071: Security check failed with error message
Hi!
We have an Oracle 9iAS R2 v9.0.2.2 installation on Linux (Red Hat Advanced Server 2.1). We have installed PatchSet 2703110, 2581587 and 2842923.
Oracle9i Reports version is: 9.0.2.2.0
iAS and Infrastructure are on separate hosts.
Trying to run Reports demo test.jsp or test.rdf we get the following message:
javax.servlet.jsp.JspException: REP-56071: Security check failed with error message: Error code30001 - Cannot access the server:rep_dkipcias
In package:wwv_rw_usr function:security_check
Command line is: server=rep_dkipcias report=/repdemo/examples/Tools/test.jsp rundate="29-MAY-03 09:05:01"
Found on Metalink the following Note: 216847.1
This recommends to comment out the security and destination tags in ORACLE_MIDDLETIER_HOME/report/conf/<repserver>.conf file
After commenting them out reports works fine.
BUT
at the end of the note there is a note which states that "Commenting out the security tag removes the integration of the reports server and portal."
We need reports integration with Portal. We need SSO as well.
Could you give any workaround for this problem?
PS.: I have red Note:213171.1, Note:216118.1, http://otn.oracle.com/products/reports/htdocs/getstart/whitepapers/securing9i.pdf and BUG:2645629
None of them gave any solution for the problem
Thanks in advance,
Andras WeintrauthHi Jeff,
Q(1): Yes.
(Report Name and Servers tab)
Report Server: REP_DKIPCIAS
Oracle Reports File Name: test.jsp
Execute: as JSP
(Other tabs)
Default values. Unchanged.
Q(2): (Acces Tab of Report Component)
Publish to Portal = checked
Inherit Privileges from Portal DB Provider = checked
(Acces Tab of Report Server Component)
Inherit Privileges from Portal DB Provider = checked
(SSO User)
The user I try to run the report with has the following group assignments:
Privilege Group
PORTAL_ADMINISTRATORS
PORTAL_DEVELOPERS
DBA
PORTLET_PUBLISHERS
Additional Info:
To be more specific: The mentioned security check failure exists outside of Portal as well. Eg. when we try to run the default portal test examples (test.jsp, test.rdf) from the iAS home page Demonstartions tab.
Thank You in advance,
Andras -
Using 4.0.2, strange error message when trying to created a webi rep
Hi all
I'm getting the error message Protocol message end-group tag did not match expected tag. (WIS 00000) while trying to create a webi report using a unx (Designer Information Design tool)
full error test below
This unx is using a 7.1 BW cube, and from the unx toll all looks to be ok
com.businessobjects.sdk.core.server.CommunicationException$UnexpectedServerException: Protocol message end-group tag did not match expected tag.
at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:144)
at com.businessobjects.sdk.core.exception.ExceptionBuilder.make(ExceptionBuilder.java:101)
at com.businessobjects.sdk.core.server.common.CommonRequestHandler.afterProcessing(CommonRequestHandler.java:127)
at com.businessobjects.sdk.core.server.internal.AbstractServer.processIt(AbstractServer.java:178)
at com.businessobjects.sdk.core.server.internal.AbstractServer.process(AbstractServer.java:133)
at com.businessobjects.sdk.core.server.internal.InstanceServer.process(InstanceServer.java:94)
at com.sap.sl.sdk.services.util.ServerRequestProcessor.processServerRequest(ServerRequestProcessor.java:49)
at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.processDataProviderCommand(DataProviderServiceImpl.java:419)
at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.processDataProviderCommand(DataProviderServiceImpl.java:431)
at com.sap.sl.sdk.dataprovider.service.DataProviderServiceImpl.run(DataProviderServiceImpl.java:192)
at com.sap.sl.sdk.workspace.service.WorkspaceServiceImpl.run(WorkspaceServiceImpl.java:346)
at com.sap.webi.ui.tasks.workflows.RunWorkspaceTask.doIt(RunWorkspaceTask.java:74)
at com.sap.webi.ui.tasks.workflows.RunWorkspaceTask.doIt(RunWorkspaceTask.java:11)
at com.sap.webi.toolkit.ui.tasks.WebITask.doInBackground(WebITask.java:113)
at javax.swing.SwingWorker$1.call(Unknown Source)
at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
at java.util.concurrent.FutureTask.run(Unknown Source)
at javax.swing.SwingWorker.run(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: com.businessobjects.sdk.core.server.ServerException: Protocol message end-group tag did not match expected tag.
at com.businessobjects.sdk.core.server.common.CommonRequestHandler.newServerException(CommonRequestHandler.java:260)
at com.businessobjects.sdk.core.server.common.CommonRequestHandler.createAllServerExceptions(CommonRequestHandler.java:238)
at com.businessobjects.sdk.core.server.common.CommonRequestHandler.afterProcessing(CommonRequestHandler.java:121)
... 18 moreYou can still create universe, just not UNX universe.
If you have upgraded Bi4.0 to Sp01 or SP02 - in IDT it will not let you do that.
As for docs :
/people/ingo.hilgefort/blog/2011/03/24/sap-integration-update-9--should-you-start-with-sap-businessobjects-40-or-wait-for-41
http://smartdirectory.sap.corp:3080/Assets/asset.epx?id=519f2955-0b47-4a0f-81d1-84e8e5303e5e
http://www.asugnews.com/2011/02/22/sap-businessobjects-bw-integration-to-get-easier-in-bi-4-0/
https://cw.sdn.sap.com/cw/servlet/JiveServlet/download/139619-38-87308/SDN%20-%20Best%
/people/ingo.hilgefort/blog/2011/02/10/sap-integration-update-part-5--web-intelligence-40-connecting-to-bex-queries -
Unable to render video in PSCS4 - Error Messages- QT DLL Issue??
I started this thread in the Adobe Forums for PhotshopCS4, but the consensus there was that my issue is a QuickTime issue, perhaps with a DLL and iTunes. I have included a few of those suggestions at the end of the post. I have tried uninstalling QT Pro, cleaning and reinstalling with no improvement. I have not removed iTunes and reinstalled.
`````````````````
I am unable to render video it seems in Photoshop CS4 Extended. Despite having the latest QuickTime Pro installed and all updates to Vista 32 bit and to CS4 Design Premium, I get the following error message:
"The procedure entry point CFCreateApplicationRepositoryPath could not be located in the data link library CoreFoundation.dll"
This happens when, for example, I load 100 medium resolution JPEGs as an image sequence and choose File >Export > Render Video.
If I OK through the error a couple of times I get a screen with output options, but usually some are greyed out. When I CAN put in QuickTime settings and choose export I get the following error:
"Could not complete the Render Video Command because of a program error."
When I have opened a support case with Adobe it has regularly been closed after being told to get QuickTime 7.2 or higher. GGGrrrr. I have QT 7.6.5 Pro installed.
Any help much appreciated....I do have Premiere Elements 7 installed as well FYI.
Thanks! System Info below:
Adobe Photoshop Version: 11.0.1 (11.0.1x20090218 [20090218.r.523 2009/02/18:02:00:00 cutoff; r branch])
Operating System: Windows Vista 32-bit
Version: 6.0 Service Pack 2
System architecture: Intel CPU Family:6, Model:15, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 4
Processor speed: 2400 MHz
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce 9500 GT/PCI/SSE2
OpenGL Drawing: Enabled.
Video Card: NVIDIA GeForce 9500 GT
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Driver: nvd3dum.dll,nvwgf2um.dll,nvwgf2um.dll
Driver Version: 8.17.11.9562
Built-in memory: 3070 MB
Free memory: 1180 MB
Memory available to Photoshop: 1632 MB
Memory used by Photoshop: 80 %
Image cache levels: 4
Serial number: removed
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS4\
Temporary file path: C:\Users\Phil\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 289.2G, 122.5G free
E:\, 298.1G, 50.0G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS4\Plug-ins\
Additional Plug-ins folder: not set
Was your QT properly installed with correct privileges? As Mr. Cox said, it seems there is an issue with your QT install. also, in the QT system control panle, enable the Allow Encoding using Legacy CoDecs option. this often fixes the weirdest issues (as it also catches a number of other legacy calls to QT components)...
Mylenium
Thanks guys- the QT install SEEMS fine....? I will try allowing legacy CODECs and if that doesnt ehlp I will totally uninstall QT Pro, clean the registry, reboot and install QT from the top. Will let you know how I get on with this.
Phil
I have enabled using legacy CODECs and restarted, same error message.
I have completely uninstalled QuickTime(Pro), run CCleaner to clear files and the registry...I have then rebooted, reinstalled Quicktime(Pro) 7.6.5, rebooted. I get the very same error message at that time.
Any further suggestions appreciated.
All the google searches point directly at Apple like Chris pointed out. I noticed that there were a lot of Apple product hits but the most standing out was itunes. Did you happen to install itunes software (or some other Apple product) and maybe itunes over-wrote the .DLL? Other then that thought I don't have any other input.
I agree this is an issue with an Apple DLL. The error you're getting suggests that the wrong version of the DLL is being used. It means that the thing that is rendering the video is expecting the CoreFoundation DLL to have a particular function called CFCreateRepositoryPath but it's not there.
What could be happening is that there are multiple instances of this DLL on the computer and the PATH is leading to the wrong one.
You might search your entire hard-drive and find where the CoreFoundation DLL exists and what version each is. If there is only one version, then perhaps your version of QuickTime is actually too new. Photoshop 11.0.1 came out a long time ago, and the version of QuickTime referred to in the support-ticket-closure response is also pretty old, so maybe the newest QuickTime is using a newer version of the DLL that Photoshop knows how to deal with.
Searching my system for CoreFoundation. there is one smaller version of the DLL in Apple Application Support dated in November and then several larger ones in directories dealing with mobile phones like the iPhone, which I don't have one of, dated a few months earlier.
I'm guessing the iPhone stuff came with iTunes, which I do have installed, though I don't really use it.
Thanks for looking, really hoping for some help here."The procedure entry point CFCreateApplicationRepositoryPath could not be located in the data link library CoreFoundation.dll"
Thanks for all the detailed information, pw. It's very helpful.
Okay, the most recent versions of QuickTime require a fully functional Apple Application Support in order to run properly. You're getting a problem with one of the Apple Application Support dlls. So the best thing to do first would be to uninstall both Apple Application Support and QuickTime, and then reinstalling QuickTime (which should reinstall a fresh version of Apple Application Support).
There's 7/Vista 32-bit instructions for doing that in the following post:
http://discussions.apple.com/thread.jspa?messageID=10760492�
Maybe you are looking for
-
Error while adding customize component to palette.
hi I am trying to add customizeJList to my palette in netbaens but its showing ,No java Beans found under selected Nodes. public class GenericList extends JScrollPane { private Vector dv = new Vector(); private Vector v_idvals = new Vector(); private
-
Once you put your ITunes into an external hard drive, will ITunes Match still work? MIne isn't loading. What a drag!
-
Calendar entries not showing in Oulook 2010 any more, after crash when moving entry
I've been using the calendar synch option in Outlook 2010 for quite a while. One day, I tried to drag a calendar entry to another date (something I've done multiple times before). Instead of moving the calendar entry, suddenly no entries are shown. I
-
Code to populate CALMONTH/Year to MAY 2007.... APR 20006.
hi Abap Gurus, Can some body help me to get code.My requirement is display previous 12 months with format "First three Chars of Month" space year.I have code for one month. But i need code to display 11 months at a time.If i enter <b>01.2007 the res
-
I was trying to install Discoverer 3i on Windows 2000 server, in the middle it hang-up and I have to restart the system. After restarting no Network services starts then I restart with last good known configuration. Now every thing is OK except IE. C