REP-3002 Error
Hi,
I have a character mode report. I wants to generate a ascii formatted file. Using 'Postscript' option, i could able to generated this file, if the machine has printer driver. If the machine don't have the printer driver, its throwing REP-3002 error. Is there any workaround way to generate ps report without printer drivers.
Thanks,
Saravanan.
Hi Srivas,
Actually i'm trying with the option you specified. Like below i'm sending the request to the report server.
http://tbau01:7888/dev60cgi/rwcgi60?key10&server=Rep60_tbau01_dev40&destype=file&desformat=dflt&desname=/app/dev40/gemini/reports/test.txt&report=RpBatchMeterDetailsSmCsepAscii.RDF
but i'm getting the Rep-3002 error.
Could pl let me know whats the wrong in it? or it still expecting the printer driver?
Thanks
Saravanan.
Similar Messages
-
Report 6i/Webdb -Not able to display the report in the browser - rep- 3002 error.
Would someone tell what I missed, I have set up the following:
1) a report using report builder on NT
2) my database is in Unix
3) my report server is started in NT
4) I run webdb listener for the following code: http://myweb.com/cgi/rwcgi60.exe?server=repserver+report=myreport+userid=usid/pw/connect_string+destype=cache+desformat=html. Then, I receive this message:
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - Report Job has terminated with error.
Reports Server Replies:
REP-3002: Error initializing printer. Please make sure a printer is installed.
Why is it thinking I want to use the printer whereas I want to display the report in the browser?. Any help would be appreciated.
nullIt sounds like that your Web CGI did not configure right. To test if your CGI configuration is correct, type:
http://hostname:port/cgi-bin/rwcgi60exe?
If you get a help screen, then you should be able to bring up your report.
Regards,
Xiaoling -
REP-3002: Error initializing printer
Hello,
This is my configuraton:
Computer 1 : nt4, sp3, installed: Oracledatabase 7.3.4
Computer 2 : nt4, sp3, installed: Oracle WebDb, forms 6i, formserver 6i and reports 6i.
Services WebDb and Listener are running.
I've connected an HP LaserJet III to the parallel port of computer 2. In the printer
control panel of NT4, this printer is set as the 'default' printer.
'myform.fmx' is a simple form.
The code consists only of a 'when-button-pressed' trigger as follows:
declare
pl paramlist;Ln varchar(15) :='Elsa';
BEGIN
pl :=get_parameter_list(Ln);
if not id_null(pl) then destroy_parameter_list(pl);end if;
pl :=create_parameter_list('Elsa');
add_parameter(pl,'DESTYPE', text_parameter,'PRINTER');
run_product(REPORTS,'C:\ORANT\REPORT60\myrep.rep',1,BATCH,FILESYSTEM,pl);
destroy_parameter_list(pl);
END;
'myrep.rep' is a simple report, consisting of:
select user from dual;
generated by the wizard.
When I run the form in preview for the web in formbuilder 6i, then it works very well,
it prints my report.
But when I run it from the cgi 'ifcgi60.exe' by the command
start -> programs -> oracle forms 6i -> run a form on the web
it returns
http://pent2.easyware.be/dev60cgi/ifcgi60.exe?
form=myform.fmx&userid=&otherparams=useSDI=yes&
lookAndFeel=generic&colorScheme=teal
then the error returned in the webbrowser is
'REP-3002: Error initializing printer. Please make sure a printer is installed.'
if parameter 'DESTYPE' is set to 'SCREEN' then it works very well, I can print by clicking the print icon.
Please can someone help me.
Best Regards,
Carl Willems.
[email protected]<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by aapmens ():
Hello,
This is my configuraton:
Computer 1 : nt4, sp3, installed: Oracledatabase 7.3.4
Computer 2 : nt4, sp3, installed: Oracle WebDb, forms 6i 6.0.8.8.0, formserver 6i and reports 6i 6.0.8.8.3.
Services WebDb and Listener are running.
I've connected an HP LaserJet III to the parallel port of computer 2. In the printer
control panel of NT4, this printer is set as the 'default' printer.
'myform.fmx' is a simple form.
The code consists only of a 'when-button-pressed' trigger as follows:
declare
pl paramlist;Ln varchar(15) :='Elsa';
BEGIN
pl :=get_parameter_list(Ln);
if not id_null(pl) then destroy_parameter_list(pl);end if;
pl :=create_parameter_list('Elsa');
add_parameter(pl,'DESTYPE', text_parameter,'PRINTER');
run_product(REPORTS,'C:\ORANT\REPORT60\myrep.rep',1,BATCH,FILESYSTEM,pl);
destroy_parameter_list(pl);
END;
'myrep.rep' is a simple report, consisting of:
select user from dual;
generated by the wizard.
When I run the form in preview for the web in formbuilder 6i, then it works very well,
it prints my report.
But when I run it from the cgi 'ifcgi60.exe' by the command
start -> programs -> oracle forms 6i -> run a form on the web
it returns
http://pent2.easyware.be/dev60cgi/ifcgi60.exe?
form=myform.fmx&userid=&otherparams=useSDI=yes&
lookAndFeel=generic&colorScheme=teal
then the error returned in the webbrowser is
'REP-3002: Error initializing printer. Please make sure a printer is installed.'
if parameter 'DESTYPE' is set to 'SCREEN' then it works very well, I can print by clicking the print icon.
Please can someone help me.
Best Regards,
Carl Willems.
[email protected]<HR></BLOCKQUOTE>
null -
Batch PDF Reports raising error REP-3002: Error initializing printer.
We are running Reports 6.0 in Windows NT 4.0. When run manually the PDF reports are able to see the PostScript Print Driver and generates PDF output. We have a batch job on the NT that gets kicked off from the Mainframe via XPATH, which spawns multiple report processes as needed to run the PDF reports. We get the error "REP-3002: Error initializing printer." under this scenario.
Any help to resolve this will be appreciated.
Thanks,
BabuHi,
i've changed to use RUN_REPORT_OBJECT as your advice and followed the instructions in "Oracle Reports Remote Printing Utility - An Oracle Technical White Paper December 2000". i tested orarrp by created the HTML file follow the steps in page 5 of the paper, it worked.
then i modified existed form, set report object property like this :
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE, FILE);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESNAME,'test.rrpa');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,'Rep60_NTSERVER2');
note : i'm not sure that i set the right value for REPORT_SERVER property, i got this value from TNSNAMES.ORA file.
then call the report with this statement :
:GLOBAL.ReportHandle := RUN_REPORT_OBJECT(report_id);
it showed the same error message :
"REP-3002 Error initializing printer. Please make sure a printer is installed."
i think i set something wrong, but i don't know where. could you help me ?
Hunsa -
HELP REP-3002: Error initializing printer on Oracle 6i
We have moved several applications Windows 2008 Standard Server and setup it up as published application on xenapp but every time a user trys to print it get initializing error.
How is this resolved ?Please post the details of the application release, database version and OS.
Have you used the TEMPLATE.fmb file to create this form?
We have moved several applications Windows 2008 Standard Server and setup it up as published application on xenapp but every time a user trys to print it get initializing error.
How is this resolved ?Please see these docs.
All Requests End In Error With REP-3002: Error Initializing Printer [ID 365267.1]
ERR REP-3002: Error Initializing Printer. Please Make Sure A Printer Is Installed [ID 951929.1]
Rep-3002: Error Initializing Printer. Please Make Sure A Printer Is Installed [ID 1083435.1]
Trouble Shooting Guide for REP-3002 [ID 203167.1]
Thanks,
Hussein -
REP-3002 error initialising printer on Unix
Hello
Has anybody got REP-3002 on Unix. I am running my character based report to generate text based output on Solaris. No matter what I do - configure the ui[rint.txt file - Set up default printer for the account running Oracle reports. I still keep getting this error.
I have successfully done this on NT but it doesnt work on Unix.
Any suggestions specific for Unix?
AmitAmit,
A couple of things to check:
-Make sure the printer specified in the uiprint.txt file is enabled at the operating system level. A quick way to test
this is to try to print any file from the command line to this printer using lp. If you can print using lp and get the
output on the printer, then the printer is enabled at the OS level.
-Oracle Reports must be able to open and read the uiprint.txt file
-The user running the report must have operating system level read permissions on the uiprint.txt file.
- Unix operating systems have an open file limit. It may be possible that Oracle Reports cannot open the
uiprint.txt file because of the open file limit.
Regards,
The Oracle Reports Team -
Error REP-3002 when call report from WebForm
Hi,
i run form (6.0) on Form Server (IAS9i) to call report (6.0) to print receipt on local printer using RUN_PRODUCT command (PARAMFORM=NO, DESTYPE=PRINTER) and got Error Message "REP-3002 Error initializing printer. Please make sure a printer is installed." but on Client-Server it's OK.
the objective is just want to direct print report to printer (do not show parameter form)
anyone know how to solve this problem ?
Hunsa
nullHi,
i've changed to use RUN_REPORT_OBJECT as your advice and followed the instructions in "Oracle Reports Remote Printing Utility - An Oracle Technical White Paper December 2000". i tested orarrp by created the HTML file follow the steps in page 5 of the paper, it worked.
then i modified existed form, set report object property like this :
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESTYPE, FILE);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_DESNAME,'test.rrpa');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,'Rep60_NTSERVER2');
note : i'm not sure that i set the right value for REPORT_SERVER property, i got this value from TNSNAMES.ORA file.
then call the report with this statement :
:GLOBAL.ReportHandle := RUN_REPORT_OBJECT(report_id);
it showed the same error message :
"REP-3002 Error initializing printer. Please make sure a printer is installed."
i think i set something wrong, but i don't know where. could you help me ?
Hunsa -
REP: 3002 & 19200 - Character base report on n-tier application.
Dear friends
We are using ORACLE 8i as database server, IIS as Web server,
Front-end
is -Forms 6i and Reports 6i. We have developed Reports both in
character
and Bitmap as per client's requirement. Bitmap reports are
working fine
in 2- tier as well as in 3- tier application.
Character base reports are working fine in 2-tier application
but in
3-tier it shows “ REP: 3002: ERROR INITIALIZING PRINTER. PLEASE
MAKE
SURE PRINTER IS INSTALLED” We have tried and communicated with
local
ORACLE for quite some time, but the solution is not found till
date. (We
have tried with DESFOMAT and other parameters)
Is there any other way so that we can generate the output in
character
mode from 3-tier (without converting to bitmap) as this is a
specific
requirement of our client. (As within the premises they are
using 2-tier
and from remote place they will be using 3-tier application
through
web.)
Could any one please help us in this matter? Pl. consider this
as a
urgent.
Thanks in advance.Yu may want to use a dictionary which has a built in hash table for the key. See code below for starting point
List<string> input = new List<string>() { "abc", "abd", "def", "ghi" };
Dictionary<string, List<string>> dict = input.AsEnumerable()
.GroupBy(x => x.Substring(0,1), y => y)
.ToDictionary(x => x.Key, y => y.ToList());
jdweng -
REP-3002 in Reports 6i in Solaris 10
Hi all,
My report server 6i is running in Solaris machine 5.10, we installed a printer on the same mechine. When we try to run rwbld60 and we click in Choose printer, we are getting the following message:
REP-3002: Error initializing printer. Please make sure a printer is installed.
We have added the configuration of our printer in $ORACLE_HOME/guicommon60/tk60/admin/uiprint.txt, we have set read and write permission to the uiprint.txt file.
How we could resolve this problem?
ThanksWe have set the DESFORMAT variable to DFLT but we are getting the same error. When we click in Choose Printer in rw60bld we get the error REP-3002 (Error initializing printer. Please make sure a printer is installed) and when we try to run the command: rwrun60 we get the error:REP-0713: Invalid printer name 'fuenla" specified by parameter where fuenla is the name of the printer.
Thank you very much in advance -
3002- Error initializing printer on Linux
hi,
I have problem above, when I select File -> Choose Printer in Report Builder 6i.
My /etc/printcap is here:
#printcap file containing the currently set up printers:
#This file is written using APS library functions, developed by Corel Corporation:
#The APS library functions reconize only the following options::
#af, br, cf, df, fc, ff, fo, fs, gf, hl, ic, if, lf, lo, lp, mx nd, nf:
#nf, of, pc, pl, pw, px, py, rf, rg, rm, rp, rs, rw, sb, sc, sd, sf, sh, st, tf, tr, vf:
#Be careful about add/modify the unconfigured mnemonic for a printer in this file:
lp|truck:\
:if=/var/spool/lpd/truck/filter:\
:lp=/dev/null:\
:sd=/var/spool/lpd/truck:\
:sh:\
:mx#0:
lp-line|typewriter:\
:if=/var/spool/lpd/typewriter/filter:\
:lp=/dev/lp0:\
:sd=/var/spool/lpd/typewriter:\
:sh:\
:mx#0:
And my uiprint.txt has these two entries:
#-- Not A Printer:ASCII:1:Configure your uiprint.txt file:none
#--1op221a:ASCII:1:Configure your uiprint.txt file:default.ppd:
# Not A Printer:ASCII:1:Configure your uiprint.txt file:none
lp-line:ASCII:1:Line printer:none
lp:Pos1tScript:1:PostScript printer:default.ppd
Any idea?
thanks,
Radek'
nullPlease post the details of the application release, database version and OS.
Have you used the TEMPLATE.fmb file to create this form?
We have moved several applications Windows 2008 Standard Server and setup it up as published application on xenapp but every time a user trys to print it get initializing error.
How is this resolved ?Please see these docs.
All Requests End In Error With REP-3002: Error Initializing Printer [ID 365267.1]
ERR REP-3002: Error Initializing Printer. Please Make Sure A Printer Is Installed [ID 951929.1]
Rep-3002: Error Initializing Printer. Please Make Sure A Printer Is Installed [ID 1083435.1]
Trouble Shooting Guide for REP-3002 [ID 203167.1]
Thanks,
Hussein -
Rep-3002 with DESTYPE=file
Hello,
I have two entries in my CGIcmd.dat file. The entries are pretty much identical, they just go to two different report servers, running on the same machine. Both specify destype=file desname=report.lis, and run the same report. One of them works fine, the other is throwing a Rep-3002.
REP-3002: Error initializing printer. Please make sure a printer is installed.
Any idea what is going on here and how to correct it?Hello,
If you are executing the Reports on Windows :
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_trouble.htm#BABDHCIG
D.1.11 Printing and Font Errors When Using In-process Server
Regards -
I get an error when i try to take a print option from form 6i
'unable to initialize the printer (REP-3002)'If you have access to metalink, check this note:
Trouble Shooting Guide for REP-3002
Note:203167.1
How to handle this error depends on the OS (Windows? If yes, which version? Unix?)
Werner -
Getting rep-3002 when calling report from form on web
i am getting rep-3002 when i call report from a form on web environment. Report is in character mode. It is coming proper if i change it to bitmap. but my requirement is of character mode. pl. give some solution.
Hello,
If you are running in WinNT/2000 environment, the NT/2000 user which runs the Report Server service must have a printer defined. In the control panel, look at the properties for the Report Server to see what user it runs as. Log in as that user and make sure a default printer is defined.
Regards,
The Oracle Reports Team --skw -
Rep-3002 while calling report from form in character mode on web environment
When I call a report by using run_product from a form , i get rep-3002. my report is in character mode. if i change it to bitmap that works fine. but my requirement is of character mode on web environment.
please help.Hello,
If you are running in WinNT/2000 environment, the NT/2000 user which runs the Report Server service must have a printer defined. In the control panel, look at the properties for the Report Server to see what user it runs as. Log in as that user and make sure a default printer is defined.
Regards,
The Oracle Reports Team --skw -
REP-770 Error while executing the report.
Hi,
I am trying to run a report in Application Server 10g. I am executing this report from a form.
When I try to run the report using the 'rdf', I get the error
"Terminated with error: <br>REP-770: There exist uncompiled program unit(s). REP-1247: Report contains uncompiled PL/SQL."
But if I run the report as 'rep' then the report works fine. Now after this if I run the report as 'rdf', it works fine again.
Just to summarise - The problem occurs if I first try to run the report as rdf. But the problem disappears if I run the report as rep first before running it as rdf.
Could someone help me solve this issue.
Thanks
ArunaHi Aruna,
I can see 2 bugs logged on Reports 9.0.4.1 (that means 10g patch 1) that report a similar problem:
BUG 4050488 - JSP REPORTS CONTAINING REF CURSOR ASKS FOR COMPILATION EVERYTIME WITH WEB LAOUT
and
BUG 4040844 - REF CURSOR QUERY REP-737 ORA-1247 RUNNING ON LINUX
Another bug reported on 10g has been fixed in upcoming Reports version 10.1.2:
BUG 3324576 - SRW.APPLY_DEFINITION IN PGM UNIT FAILS USING .REP FILE WITH REP-1457 ERROR
They are published bugs. See if you are hitting the same issue. Though I don't think that these bugs reported REP-1247 only the FIRST time you run the report.
Secondly, when I said "compile on the same platform on which you are going to run", I meant this - if you are going to run the report on OracleAS installed on Win 2000, you must compile the report in Reports Builder on Win 2000. Similarly, if you are going to run the report on OracleAS installed on Linux, you must compile the report in Reports Builder on Linux, before running it.
Navneet.
Maybe you are looking for
-
Hi All, Can any one help me to tranforming the XML of following type <Details> <Name>AAA</Name> <Number>111</Number> <Subject>S1</Subjec> </Details> <Details> <Name>AAA</Name> <Number>111</Number> <Subject>S2</Subjec> </Details> <Details> <Name>AAA</
-
I am trying to debug a ASP.Net web application within visual studio 2010 using Firefox. I am able to set breakpoints in my C# code and they work but if I set a breakpoint in a javascript file then these do not work when using Firefox. Is there any wa
-
How to deactivate serial numbers PEPE10
I Restored my computer to its factory defaults. when reinstalling PEPE10, Accidentally installed disc 1, I should have installed disc 2 for windows 7 x64bit.The uninstaller tells me to deactivate and remove serial numbers used when installing on my
-
Do we need the equivalent of "labelStyleName" property for Spark FormItem class?
Hi all, I do not find an CSS way to change the colour of Spark FormItem label, the only way is to edit FormItemSkin. The use-case is as follows: I want to empathize via visual means only a few Spark FormItems in a Form.
-
How to uninstall iOS8 & return to iOS7 on iPad2?
My iPad 2 ran just fine under iOS7 but since upgrading to iOS8 (latest updates) it has become sluggish and a few key apps now crash. I tried restoring from a prior save with no luck since the firmware has changed. Any constructive suggestions on ho