REP-52266: The in-process Reports Server rep_mictest failed to start.oracle
Dear All
I am facing the problem while calling report from Application server . When i checked the trace log file i got the below message .
Exception 50139() Cant delete file E:\Mid\reports\server\<servername>.dat
Can any one help me to come out from this problem
Thanks
jack
Hi Jack
Metalink id ID 429950.1,will provide u solutons
Change the Reports Server configuration so that minEngine is set to a value less than or equal to initEngine and maxEngine
Make the changes in ur rep_mictest.conf file location /$ORACLE_HOME/reports/conf(Take the backup of original report server.conf file)
In my case the min Engine and InitEngine are set as follows
<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="4" maxEngine="6" minEngine="3" engLife="50" maxIdle="30" callbackTimeOut="90000">
Once you make the above changes,Bounce the report server
Regards
Fabian
Similar Messages
-
Hi,
I have installed oracle forms and reports 11gR2 on Windows 7 Professional 64bit (and configured in development mode), the forms are working fine but when i run a report i get this message
REP-52266: The in-process Reports Server rep_adminserver_ikit_asinst_1 failed to start.oracle.reports.RWException: IDL:oracle/reports/RWException:1.0I was trying to add a new destination:
<destination class="oracle.reports.server.DesMail" destype="mail"/>
I couldn't make it work , so I commented my changes.
In fact, I should have gone back to a backup file , as weblogic seemed to have changed the file itself!! (attributes of the xml tags were in different order, and more things ...) but just undoing what I have done did the trick.
This file seems to be quite picky, I left this tag uncommented
</pluginParam>
and the same REP-5226 error happened. -
REP-52266: The in-process Reports Server rep_myhostname failed to start
Hi Everyone,
My name is John and I've a small 10g report configuration issue which I would like to share and, hopefully, some of you might already have come across it and able to assist and guide me through it.
First, I've installed Oracle Developer Suite 10g 10.1.2.0.2 together with Report Builder 10.1.2.0.2 and Oracle Forms Developer 10.1.2.0.2 onto a 32bit Window 2000 Professional machine.
I've tried to run the following URL which test for the servlet connectivity and it returns fine with all the valid reports servlet commands page.
http://myhostname:8889/reports/rwservlet
However, as I've tried to run the 'test.rdf' report using the following link:
http://myhostname:8889/reports/rwservlet?destype=cache&desformat=PDF&report=test.rdf&userid=user/pass@host
And it returns the following error on the browser:
REP-52266: The in-process Reports Server rep_myhostname failed to start.oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
Then I set trace option on in the myhostname.conf file and restart the OC4J instance. And the trace file has the following results:
*[2009/2/18 11:21:31:687] Info 56021 (EngineManager:spawnEngine): Engine rwURLEng-0 has been launched*
*[2009/2/18 11:21:31:687] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Initial*
*[2009/2/18 11:21:31:687] Debug 50103 (JobStore:writePersistFile): Purge persistent file*
*[2009/2/18 11:21:31:717] Debug 50103 (JobStore:writePersistFile): Purge persistent file done*
*[2009/2/18 11:21:51:766] Warning 50103 (EngineManager:registerEngine): REP-55103: API URLEngine:getEngineEnvs not applicable to URL engine*
*[2009/2/18 11:21:51:766] Info 56026 (EngineManager:registerEngine): Reports Server started up engine rwURLEng-0*
*[2009/2/18 11:21:51:856] Debug 50103 (EngineManager:updateEngineState): Engine rwURLEng-0 status is 1*
*[2009/2/18 11:21:51:856] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Ready*
*[2009/2/18 11:23:1:687] Info 56106 (EngineManager:manage): Engine rwEng-0 is destroyed due to timeout*
*[2009/2/18 11:23:1:687] Exception 56097 (): Engine rwEng-0 callback timeout*
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
* at oracle.reports.utility.Utility.newRWException(Utility.java:756)*
* at oracle.reports.server.EngineManager.manage(EngineManager.java:291)*
* at oracle.reports.server.IdleThread.run(IdleThread.java:88)*
*[2009/2/18 11:23:1:707] Debug 50103 (ServerPacketReceiver:handlePacket): Got a request packet*
*[2009/2/18 11:23:1:717] Info 56029 (EngineManager:shutdownEngine): Shutting down engine rwURLEng-0*
*[2009/2/18 11:23:1:717] State 56004 (EngineInfo:setState): Engine rwURLEng-0 state is: Shutdown*
*[2009/2/18 11:23:1:727] Info 56047 (EngineManager:remove): Reports Server shut down engine rwURLEng-0*
*[2009/2/18 11:23:5:813] Info 50103 (ServerPacketHandler:stop): Multicastmanager stopped successfully*
*[2009/2/18 11:23:5:813] Info 50002 (RWServer:shutdown): Server is shutting down*
*[2009/2/18 11:23:5:813] Info 50103 (RWServer:startServer): Notify thread to exit*
*[2009/2/18 11:23:5:843] Info 50103 (RWServer:startServer): RWServer thread exits*
*[2009/2/18 11:23:5:843] Exception 56097 (): Engine rwEng-0 callback timeout*
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
* at oracle.reports.utility.Utility.newRWException(Utility.java:756)*
* at oracle.reports.server.EngineManager.manage(EngineManager.java:291)*
* at oracle.reports.server.IdleThread.run(IdleThread.java:88)*
I've not changed any of the report's related configuration files and the java version of the machine is 1.4.2_06. I do not know whether I need to apply a patch for this particular Developer Suite version or is there something which I've not done in terms of post-installation tasks. Thank you for your time and effort. Any feedback is much appreciated as I've been spending a number of days to solve this problem. Thank you and have a nice day.
Kind Regards,
JohnHi,
Thanks for your reply and here is the output of the rwEng-0.trc file. I could not find anything "interesting" as you mentioned. Please let me know if you find anything missing in there. Also, currently there is only one network printer setup on the machine. Can you please elaborate on the printer bit as I'm unsure of what to troubleshoot. Also, I forgot to inform you that I have a previous version of Developer 2000 Form and Report installed prior to the 10g Developer Suite installation. Does it ring a bell to any other problem? Thank you again for your time and effort. Have a nice day.
Kind Regards,
John
*[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[0]=name=rwEng-0*
*[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[1]=server=rep_myhostname*
*[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[2]=ORACLE_HOME=C:\oracle\ora10g1*
*[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[3]=engineimplclass=oracle.reports.engine.EngineImpl*
*[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[4]=traceopts=trace_all*
*[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[5]=tracefile=C:\oracle\ora10g1\reports\logs\rep_EZRA\rwEng-0.trc*
*[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[6]=tracemode=trace_replace*
*[2009/2/18 11:21:35:773] Debug 50103 (RWEngine:init): args[7]=cacheDir=C:\oracle\ora10g1\reports\cache*
*[2009/2/18 11:21:35:783] Debug 50103 (RWEngine:init): args[8]=server_ior=C:\TEMP\tmp_1440568*
*[2009/2/18 11:21:36:284] Info 50128 (RWEngine:init): orb init succeeded*
*[2009/2/18 11:21:37:45] Info 55007 (EngineImpl:loadLibrary): Load rw.dll succeeded*
*[2009/2/18 11:21:37:45] Debug 50103 (EngineImpl:init): useDataCache = null*
*[2009/2/18 11:21:37:45] Debug 50103 (EngineImpl:init): ignoreDataParameter = null*
*[2009/2/18 11:21:37:75] Debug 50103 (EngineImpl:EngineImpl): start CInitEngine()*
*[2009/2/18 11:21:37:75] Debug 50103 (EngineImpl:EngineImpl): commandline[0] = rw*
*[2009/2/18 11:21:37:75] Debug 50103 (EngineImpl:EngineImpl): commandline[1] = ora_rw20_3tng*
*[2009/2/18 11:21:37:75] Debug 50103 (EngineImpl:EngineImpl): commandline[2] = rep_myhostname*
*[2009/2/18 11:21:37:75] Debug 50103 (EngineImpl:EngineImpl): commandline[3] = C:\oracle\ora10g1\reports\cache*
*[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[4] = null*
*[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[5] = null*
*[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[6] = trace_all*
*[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[7] = C:\oracle\ora10g1\reports\logs\rep_EZRA\rwEng-0.trc*
*[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[8] = trace_replace*
*[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[9] = null*
*[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[10] = null*
*[2009/2/18 11:21:37:85] Debug 50103 (EngineImpl:EngineImpl): commandline[11] = null* -
Reports 11gR2 - The in-process Reports Server failed to start
Hello,
I recently installed the new Forms Reports 11gR2 on an Oracle Linux 5 update 6 64bit. Firstly, I installed the JDK1.6.29 64bit. Then, I installed the Weblogic Server 10.3.5 (jar version). Finally, I installed the Forms Reports 11gR2. After installation I reboot the machine. When it came up I manually started the Weblogic Server (10.3.5), the WLS_Forms, the WLS_Reports and OPMN. Everything looks fine except the in-process reports server.
I can access the page (http://apps8.orasys.gr:8888/reports/rwservlet) without any problems but when I try to access the showjobs (http://apps8.orasys.gr:8888/reports/rwservlet/showjobs?)
I get this message “REP-52266: The in-process Reports Server rep_wls_reports_apps8_asinst_1 failed to start.oracle.reports.RWException: IDL:oracle/reports/RWException:1.0”
The status of the In-process Reports Server is down. When I try to start it, it fails. This is what I get in the log files:
#SEARCH_CRITERIA
# START_TIME: 2011-11-15T09:36:20.036+02:00
# END_TIME: 2011-11-15T10:36:20.036+02:00
# MESSAGE_TYPES:INCIDENT_ERROR, ERROR, UNKNOWN
#SELECTED_TARGETS_LIST
# /Farm_ClassicDomain/ClassicDomain/WLS_REPORTS/reports(11.1.2):oracle_repapp
[2011-11-15T10:06:53.414+02:00] [WLS_REPORTS] [INCIDENT_ERROR] [REP-50125] [oracle.reports.server] [host: apps8.orasys.gr] [nwaddr: 212.205.62.203] [tid: Thread-34] [userId: <anonymous>] [ecid: 004gS5sBFOS0RtdePdaQPP00017Y00000O,1:27964] [probKey: 33] [APP: reports#11.1.2] [URI: /reports/rwservlet/showjobs] REP-50125 : java.lang.StringIndexOutOfBoundsException: String index out of range: -1 [[
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(String.java:1937)
at oracle.reports.server.LDAPManager.createDirContext(LDAPManager.java:260)
at oracle.reports.server.LDAPManager.createOIDContext(LDAPManager.java:176)
at oracle.reports.server.RWSecurity.start(RWSecurity.java:122)
at oracle.reports.server.SecurityHelper.start(SecurityHelper.java:107)
at oracle.reports.server.RWServer.startServer(RWServer.java:985)
at oracle.reports.server.RWServer.run(RWServer.java:358)
at java.lang.Thread.run(Thread.java:662)
[2011-11-15T10:07:02.729+02:00] [WLS_REPORTS] [INCIDENT_ERROR] [] [oracle.reports.servlet] [host: apps8.orasys.gr] [nwaddr: 212.205.62.203] [tid: [ACTIVE].ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <anonymous>] [ecid: 004gS5sBFOS0RtdePdaQPP00017Y00000O,0:1:0x5f5e102] [probKey: 34] [APP: reports#11.1.2] [URI: /reports/rwservlet/showjobs] ServerManager:getServer Bind to Reports Server rep_wls_reports_apps8_asinst_1 failed.
[2011-11-15T10:36:05.110+02:00] [WLS_REPORTS] [INCIDENT_ERROR] [REP-50125] [oracle.reports.server] [host: apps8.orasys.gr] [nwaddr: 212.205.62.203] [tid: Thread-68] [userId: weblogic] [ecid: 9abaf3e65885e557:23d03fee:133a635b091:-8000-0000000000000296,0] [probKey: 35] [APP: reports#11.1.2] REP-50125 : java.lang.StringIndexOutOfBoundsException: String index out of range: -1 [[
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(String.java:1937)
at oracle.reports.server.LDAPManager.createDirContext(LDAPManager.java:260)
at oracle.reports.server.LDAPManager.createOIDContext(LDAPManager.java:176)
at oracle.reports.server.RWSecurity.start(RWSecurity.java:122)
at oracle.reports.server.SecurityHelper.start(SecurityHelper.java:107)
at oracle.reports.server.RWServer.startServer(RWServer.java:985)
at oracle.reports.server.RWServer.run(RWServer.java:358)
at java.lang.Thread.run(Thread.java:662)
[2011-11-15T10:36:11.798+02:00] [WLS_REPORTS] [INCIDENT_ERROR] [] [oracle.reports.servlet] [host: apps8.orasys.gr] [nwaddr: 212.205.62.203] [tid: [ACTIVE].ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 9abaf3e65885e557:23d03fee:133a635b091:-8000-0000000000000296,1:27966] [probKey: 36] [APP: reports#11.1.2] ServerManager:getServer Bind to Reports Server rep_wls_reports_apps8_asinst_1 failed.
#MESSAGE_COUNT: 4
Please help. I really need to evaluate version in order to move to it as soon as possible.
Thank you in advance,
EvrisHi Evris,
REP-50125 : java.lang.StringIndexOutOfBoundsException: String index out of range: -1
Follow the below metalink id
Start Report Server Failed, Javalang String Indexoutof Boundexception Rep-50125 [ID 372362.1]
Hope this will be helpful,
Regards,
Fabian -
PFRD 11.1.1.4 - How to stop the In-process Reports Server
I'm running an "out-of-the-box" PFRD 11.1.1.4 installation in Windows XP SP3.
According with documentation:
http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_strt006.htm#BEHDJFHD
To directly start or stop the in-process Reports Server using a URL, enter the following in your Web browser:
http://machine_name:port/reports/rwservlet/startserver
http://machine_name:port/reports/rwservlet/stopserver
startserver works.
stopserver returns:
REP-50171 : Authentication failed.
Tried
http://machine_name:port/reports/rwservlet/stopserver?authid=weblogic/passwd
same error.
Commented the line:
<!--security class="oracle.reports.server.RWJAZNSecurity" id="rwJaznSec"/-->
in rwserver.conf.
Same error.
The only uncomented elements in "rwservlet.properties" (original configuration) are
<server>rep_wls_reports_pfurtado-lap_asinst_1</server>
<singlesignon>no</singlesignon>
<inprocess>yes</inprocess>
Did any of you managed to stop "in-process" reports server using the reports servlet?
What credentials did you use?
Thanks & Best Regards
PauloThanks RZ!
The line you mentioned was already as you described.
According with the documentation:
[Starting and Stopping Reports Server|http://docs.oracle.com/cd/E17904_01/bi.1111/b32121/pbr_strt001.htm#i1005629]
If Reports Server is running as an in-process server through the Reports Servlet, issue the following URL:
http://your_host_name:port_number/reports/rwservlet/stopserver?authid=admin user/admin password
Note:
authid is Reports Server's administration user name and password. In Oracle Reports 11g Release 1 (11.1.1), the default security is based on standards-based Java EE security model through Oracle Platform Security Services. For a non-secure Reports Server, this user is defined in the identifier element.
I added the identifier element to rwserver.conf and restarted WLS_REPORTS, but after this the in-process reports server failed to start with the usual generic exception.
I finally found the missing step in:
How To Secure Showjobs Web Command In A Non Secured Reports Server In Oracle Report 11g? (Doc ID 1242614.1)
The thing is that the identifier element has to be placed in the right location inside rwserver.conf:
The needed change is:
FROM
<queue maxQueueSize="1000"/>
<pluginParam name="mailServer" value="%MAILSERVER_NAME%"/>
TO
<queue maxQueueSize="1000"/>
<identifier encrypted="no">....type here your user/password....</identifier>
<pluginParam name="mailServer" value="%MAILSERVER_NAME%"/>
So although using the default non-secure reports server, the identifier element has to be present in rwserver.conf for rwservlet/stopserver to work as described above.
Otherwise the needed authentication will fail as described.
Regards
Paulo -
Reports Server Servoce failed to Start
Hi
We installed Reports6i recently and we are not able to start the reports service . It gives an error message . Any one has any idea?
The Oracle Reports Server [Rep60_HDIIS1] service terminated with service-specific error 181.
Thanks
Smita_t<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Smita_T:
Where do I find server log files and config files. I checked the TNSNAMES.ora file and I don't know about Protal Security where do I check that?
Thanks
Smita<HR></BLOCKQUOTE>
Smita,
I am experiencing the same error (181) and am awaiting some response from Oracle !
I think the config files mentioned are '\oracle\806\conf\6iserver.conf' which is used to define various Aliases etc, '\oracle\isuites\apache\apache\conf\httpd.conf' which configures the Apache listener.
I think one of the log file(s) is \oracle\806\report60\server\[your report server name].txt - although this does not contain a great deal of information !
When I get more info from Oracle I will let you know !
Regards,
Calum.
null -
REP-51002: Bind to Reports Server "test_srv" failed & REP-52266
Hi folks,
I'm trying to run reports on my machine localy, but when I run my report I always obtain this error:
REP-51002: Bind to Reports Server "test_srv" failed
I searched for this answer, but nothing worked for me.
I tried steps described in thread: REP-51002: Bind to Reports Server <servername> failed
So I did this:
1. I run OC4J
2. In file %ORACLE_HOME%\reports\conf\rwnetwork.conf I commented line with multicast and uncomented namingService part. Now rwnetwork.conf file looks like:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE discoveryService SYSTEM "file:C:\Oracle_10g_R2/reports/dtd/rwnetworkconf.dtd">
<discoveryService>
<!--multicast channel="228.5.6.7" port="14021" timeout="1000" retry="3"/-->
<namingService name="Cos" host="localhost" port="14021"/>
</discoveryService>3. In cmd, in C:\ORACLE_10g_R2\bin>namingservice 14021
Naming Service started sucessfully
4. In cmd:
C:\ORACLE_10g_R2\bin>rwdiag -findAll
Naming service used to locate servers
Naming Server host = localhost
Naming Server port = 14021
(1) test_srv : Type = server : Host = NA
5. I copied my report into: c:\Temp\report_test\szrcomp.rdf
6. I run report from IE browser using url:
http://localhost:8889/reports/rwservlet?report=c:\Temp\report_test\szrcomp.rdf&destype=cache&server=test_srv&desformat=htmlcss&userid=usr/psw@db
I received Error:
REP-51002: Bind to Reports Server test_srv failed
7. http://localhost:8889/reports/rwservlet/getserverinfo
I received Error:
REP-52266: The in-process Reports Server rep_dimopatsep05 failed to start.oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
8. http://localhost:8889/reports/rwservlet/showjobs
The same error as in 7.
Can somebody help me with this problem?
Thanks,
Tomas
sorry for duplicate post in REP-51002: Bind to Reports Server "test_srv" failed & REP-52266
but this section it probably better for my problem.Hello,
You should test first with a "standalone" reports server :
1. Stop the OC4J
2. Start the namingservice
3 Start the reports server :
rwserver server=test_srv
4. test to execute a report :
rwclient server=test_srv report=test destype=cache desformat=html
If the reports server does not start , it will be necessary to activate the trace in
order to get details about the problem :
Edit the file $ORACLE_HOME/reports/conf/<reports server name>.conf
Modify it in order to have a line :
<trace traceOpts="trace_all"/>
restart the reports server
Regards -
In-Process Report Server error
Hi,
I use Oracle Database 10g and Oracle Developer 10g (Forms and Reports)
In Windows 2000 SP4 platform.
I am having difficulties with the OracleAS Reports Service page.
http://localhost:8889/reports/rwservlet
It showed OracleAS Reports Services - Servlet Command Help
Next, I tried to navigate to the following URL
http://localhost:8889/reports/rwservlet/showjobs
Suddenly another window message popup showing an error
The window's title is : javaw.exe - Entry Point Not Found
The procedure entry point kguuseg could not be located in the dynamic link library oraclient10.dll
with only one button "Ok" to click
After I clicked the button, the following error appear in the web browser
REP-52266: The in-process Reports Server rep_<computer_name> failed to start.oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
The same error happens to all commands listed in the Servlet Command Help page.
I also noticed that inside the OC4J command prompt which is running, the following error listed
Not able to load oracle.reports.util.EnvironmentGlobal class
Using oracle.reports.util.Environment class
REP-56105: Engine rwEng-0 died with error:
Is there anybody who has the same problem?
Is there any solution for this problem?
Many thanks,
BuntoroHi,
Problem solved.
I got the solution from another post.
Re: REP-51002: Bind to Reports Server rep failed
Here are the step I did.
Note : Please make backup for the following file : rwnetwork.conf
- In file rwnetwork.conf, remove or commented the following
<multicast channel="228.5.6.7" port="14021" timeout="1000" retry="3"/>
- And then uncommented
<namingService name="Cos" host="%NAMING_HOST%" port="%NAMING_PORT%"/>
- replace the
%NAMING_HOST% with your computer name or specify an IP address
%NAMING_PORT% with 14021
It should look like this :
<namingService name="Cos" host="blahblah" port="14021"/>
- I did not change the : name="Cos", since I do not understand what does it for
- Save you changes.
- Start the OC4J.
- Find the location of : namingservice.bat (on Windows platform)
- execute in the command line : namingservice.bat 14021
- finally start the report in the web browser
Note:
To shutdown the namingservice, use : namingservice.bat 14021 shutdown
Regards.
Buntoro -
OPMN Can't Find In-Process Reports Server
Hi,
OracleAS 10g (9.0.4.2), Middle-tier, BI_Forms installation.
When I attempt to restart the in-process Reports server with Enterprise Manager 10g (9.0.4), I get the following error:
An error occurred while restarting "Reports Server: rep_204".
An error occurred while talking to OPMN. Could not find entity for "rep_204".
However, if I restart the OC4J_BI_Forms component, the in-process Reports server restarts normally.
I removed the <security></security> tags and the "securityId=" from the job tags in the Report server's .conf file per Oracle Note:210224.1. I also changed SINGLESIGNON=YES to SINGLESIGNON=NO in the rwservlet.properties file. No other configuration chages have been made - this is fresh middle-tier install. Our application does not use Single Sign-On (which is enabled by default for Reports servers).
I know in-process Reports servers exist in the OC4J_BI_Forms instance, but is it possible to restart them without restarting OC4J? Or is the inclusion of a "Restart" button on the in-process Reports server's control page just one of those "to be added" features?Hi Evris,
REP-50125 : java.lang.StringIndexOutOfBoundsException: String index out of range: -1
Follow the below metalink id
Start Report Server Failed, Javalang String Indexoutof Boundexception Rep-50125 [ID 372362.1]
Hope this will be helpful,
Regards,
Fabian -
Starting Up In-Process report server.
There's a way to automatically starting up the in-process report server when i start standalone report server from Windows services or simply starting up the in-process report server from Windows command line?
I have created the "beasvc <DOMAIN>_WLS_REPORTS" service but when i reboot my application server i can't run reports until launch the URL:
http://<IP>:<PORT>/reports/rwservlet/showenv
or
http://<IP>:<PORT>/reports/rwservlet/startserver
Thank you
Bye
Edited by: user10834776 on 13-apr-2012 3.11There's a way to automatically starting up the in-process report server when i start standalone report server from Windows services or simply starting up the in-process report server from Windows command line?
I have created the "beasvc <DOMAIN>_WLS_REPORTS" service but when i reboot my application server i can't run reports until launch the URL:
http://<IP>:<PORT>/reports/rwservlet/showenv
or
http://<IP>:<PORT>/reports/rwservlet/startserver
Thank you
Bye
Edited by: user10834776 on 13-apr-2012 3.11 -
How to setup in-process report server 11g on linux for destype=printer
Currently, I'm facing following error when send RDF report directly on printer with destype=printer using run_report_object built-in
REP-50159: The report generated successfully but distribution to destinations failed.
REP-50157: Destination ID TESTREP failed with error An error occurred while sending the file to printer \\hostname\printername. Exit with error code 1..
When i check on report server cache PDF file is generated /wls/asinst_1/reports/cache/\\askit\PRN01F8gFTQkG5v.pdf but job not go to printer as mention in trace rwlpr.trc file output below.
Note: rwlpr.trc file generated by following 268295.1
==============================================================
XAUTHORITY=/tmp/.gdmT93JDW
_=/usr/bin/env
Parameters : -P "\\askit\PRN01F8" -#1 "/wls/asinst_1/reports/cache/\\askit\PRN01F8gFTQkG5v.pdf"
+ '[' '!' 4 -gt 0 ']'
+ '[' -P = -help ']'
++ uname -s
+ '[' Linux = HP-UX ']'
+ PRNCMDS='lpr lp'
+ for CMD in '$PRNCMDS'
++ which lpr
++ grep lpr
+ PRNCMDPATH=/usr/bin/lpr
+ '[' '!' -x /usr/bin/lpr ']'
+ '[' -x /usr/bin/lpr ']'
++ basename /usr/bin/lpr
+ '[' lpr = lpr ']'
++ uname -s
+ '[' Linux = Linux ']'
++ echo -P '"\\askit\PRN01F8"' -#1 '"/wls/asinst_1/reports/cache/\\askit\PRN01F8gFTQkG5v.pdf"'
++ tr -d '"'
+ /usr/bin/lpr -P '\\askit\PRN01F8' -#1 '/wls/asinst_1/reports/cache/\\askit\PRN01F8gFTQkG5v.pdf'
/usr/bin/lpr: The printer or class was not found.
+ exit 1
=============================================================
I didn't do any configuration in Enterprise Manager for Printer Configuration. Is this the reason? Is any thing I missed out?
Environment Setup:
Server Side:
Oracle Linux 5 (No printer is setup)
Oracle Weblogic Server 10.3.6
Oracle FMW Forms and Report 11.1.2
Configure: In-Process Report Server
Client Side:
Window 7
Printer: Default network printer set with client
Best Regards,
FaniHi,
the first thing you need to check is if you are able to print from the OS using the same lpr command that reports is using and using the printer queue being used when you submitted the report request.
Try to print any file from command line using lpr and your print queue \\askit\PRN01F8. If this does not work then that needs to be fixed from the OS standpoint before running report to printer.
Hope it helps
Regards, RZ -
How to setup in-process report server 11g on linux for destype=mail
Currently, getting Error when send report as an email attachment destype=mail. Is there any thing missed out during Mail server configuration?
REP-50159: The report generated successfully but distribution to destinations failed.
REP-50152: Destination ID ProfitLoss failed with error An error occurred while sending mail: null..
Call report via Oracle form with destype=mail, desformat=PDF and [email protected]
Log file: rwserver_diagnostic.log
[2012-05-13T17:04:39.273+03:00] [WLS_REPORTS] [INCIDENT_ERROR] [REP-50152] [oracle.reports.server] [tid: 16] [userId: <anonymous>] [ecid: 0000JT6ULwsATOG6yz6iMG1Ffvn4000000,1:18567] [APP: reports#11.1.2] REP-50152 : An error occurred while sending mail: null. [[
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
at oracle.reports.utility.Utility.newRWException(Utility.java:1053)
at oracle.reports.server.MailService.send(MailService.java:588)
at oracle.reports.server.DesMail.sendFile(DesMail.java:186)
at oracle.reports.server.Destination.send(Destination.java:578)
at oracle.reports.server.JobObject.distribute(JobObject.java:2041)
at oracle.reports.server.JobManager.updateJobStatus(JobManager.java:2763)
at oracle.reports.server.EngineCommImpl.updateEngineJobStatus(EngineCommImpl.java:154)
at oracle.reports.server.EngineCommPOA._invoke(EngineCommPOA.java:94)
at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:637)
at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:189)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1682)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1540)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:922)
at com.sun.corba.se.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:181)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:694)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:451)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1213)
at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.performWork(ThreadPoolImpl.java:471)
at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:500
Able to print report via Oracle form with destype=CACHE, desformat=PDF.
Mail Server Parameters are defined.
EM > Reports Application Basic Configuration > Mail Server Parameters
Mail Server, Mail Server Port, Mail Server Username, Mail Server Password Key.
Environment:
Server Side:
Oracle Linux 5
Oracle Weblogic Server 10.3.6
Oracle FMW Forms and Report 11.1.2
Configure: In-Process Report Server
Client Side:
Window 7Now, reported issue is resolved, able to send report when destype=mail
Go to EM > Report Server > Administrator > Advanced Configuration:
Under this section "Reports Pluggable Destinations" add
New Destination Name: mail
Class: oracle.reports.server.DesMail -
why i cant open my report in JDeveloper tools but i can open in report builder ????
this is the error i get ...
Reports Error Page
Fri Oct 18 15:41:54 SGT 2002
javax.servlet.jsp.JspException: REP-51002: Bind to Reports Server reportserver failed
javax.servlet.jsp.JspException: REP-51002: Bind to Reports Server reportserver failed
int oracle.reports.jsp.ReportTag.doStartTag()
ReportTag.java:329
void MyReport.jspService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
MyReport.jsp:4
void oracle.jsp.runtime.HttpJsp.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
HttpJsp.java:119
void oracle.jsp.runtimev2.JspPageTable.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse, java.lang.String)
JspPageTable.java:302
void oracle.jsp.runtimev2.JspServlet.internalService(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
JspServlet.java:407
void oracle.jsp.runtimev2.JspServlet.service(javax.servlet.http.HttpServletRequest, javax.servlet.http.HttpServletResponse)
JspServlet.java:328
void javax.servlet.http.HttpServlet.service(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
HttpServlet.java:336
void com.evermind.server.http.ServletRequestDispatcher.invoke(javax.servlet.ServletRequest, javax.servlet.ServletResponse)
ServletRequestDispatcher.java:684
void com.evermind.server.http.ServletRequestDispatcher.forwardInternal(javax.servlet.ServletRequest, javax.servlet.http.HttpServletResponse)
ServletRequestDispatcher.java:269
boolean com.evermind.server.http.HttpRequestHandler.processRequest(com.evermind.server.ApplicationServerThread, com.evermind.server.http.EvermindHttpServletRequest, com.evermind.server.http.EvermindHttpServletResponse, java.io.InputStream, java.io.OutputStream, boolean)
HttpRequestHandler.java:735
void com.evermind.server.http.HttpRequestHandler.run(java.lang.Thread)
HttpRequestHandler.java:243
void com.evermind.util.ThreadPoolThread.run()
ThreadPoolThread.java:64i still get the same error .. is it i need to set any environment variable or ... any setting ...??
login Oracle Database
user name = system
password = manager
services = dbhenry
setting JSP Report
Report Name = MyReport1
Reports Server = reportserver
Parameters = userid=system/manager@dbhenry
the cource code below is my JSP report coding :
<rw:report id="MyReport1" parameters="server=reportserver&userid=system/manager@dbhenry">
<rw:objects id="objects">
<?xml version="1.0" encoding="WINDOWS-1252" ?>
<report name="MyReport1" DTDVersion="9.0.2.0.0">
<xmlSettings xmlTag="MYREPORT1" xmlPrologType="text">
<![CDATA[<?xml version="1.0" encoding="&Encoding"?>]]>
</xmlSettings>
<data>
<dataSource name="Q_1">
<select>
<![CDATA[SELECT ALL HENRY.TEL, HENRY."ADD", HENRY.NAME, HENRY.ID
FROM HENRY ]]>
</select> -
Java Error while executing the excel template in the BIP 10g report server
Hello Gurus,
While we are executing the excel template we are getting the following java error and the report cannot be rendered to user who triggers the report. Where as the same excel template is generating output when user run it against the same data locally.
"oracle.apps.xdo.servlet.scheduler.ProcessingException: [ID:652] Document file to deliver not found : C:\Oracle\bipublisher\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\xdo\tmp\xmlp3307tmp
at oracle.apps.xdo.servlet.scheduler.XDOJob.deliver(XDOJob.java:1172)
at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:495)
at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:520)"
We have tried with designing the .rtf template for this report and we are able to generate the report form the server. Please let us know the cause for this error in the server and way to rectify the exception from the report server.
Thanks,
Kamath."oracle.apps.xdo.servlet.scheduler.ProcessingException: [ID:652] Document file to deliver not found : C:\Oracle\bipublisher\oc4j_bi\j2ee\home\applications\xmlpserver\xmlpserver\xdo\tmp\xmlp3307tmp
imho it's about empty result file
Data are there
may be yes but is some data from all for report itself ?
in other words data can be in output ( in xml ) but report can filters data and so report doesn't have appropriate data to representation ( it's assumption for error )
Data are there, when we are using rtf template, it is generating the output.
if you sure about data for report and on this data report works fine by bip desktop, so no ideas, only SR
btw you can first check my assumption and try to catch "no data found" in template
also you can check data itself, is it well-formed xml -
How to debug a form (servlet) in the Forms and Reports Server
Hi:
I have a new install of an application that ran perfectly on a different host using the Forms and Reports Server.
I have installed the FRS on the new host and it is working fine. I can run the test form.
When I run my actual forms app, I only get a blank screen in the browser and on the status bar it reports "Applet Started'.
Is there a way I can turn on debugging or something so I can see at what point it is failing or why the form is not opening properly?
Any advise would be appreciated.
Many thanks.
BruceThanks for the reply Frank. I have looked all through the Start menu but see no "Configuration and Migration". I assume it's because I only installed the Forms and Reports option, so I only have Forms Services, Reports Services, and the Universal Installer. No big deal - I've already setup tnsnames manually. I just like to use the Net Assistant when I can.
Maybe you are looking for
-
I am trying to save a doc. to a external hard drive and it wont allow me. I says its read only, any ideas on how to correct it?
-
Period open for both the company codes
Hi All, I have a scenario wherein one company code has been made defunct and its marketing activity have been transfered to another company code which hitherto only takes care of manufacturing. The customers of the defunct company code have been ext
-
How to get the number of rows in a report region
Hi all, Is there a way to get the number of rows returned in a report region, without issuing an additional "select count(*) from some_table"? I mean something like the substitution string #ROW_NUM# but for the total rows. Thanks, Pedro.
-
Error "The Connection Failed" in Time Machine, Migration Assistant and Restore From DVD
I am receiving this error when trying to connect to my Time Machine Backup in my Time capsule. I input the proper password to access my Time Capsule and It returns me to the screen with the caption "The connection failed" under the Time Capsule name
-
ADC to DVI adapter how ???
I have PowerMac Pro with Intel chips and ATI Radeon X1900 video graphics card and Apple Cinema Display but dont know how to connected them, Do you know how to convert the Apple ADC display output to DVI inexpensively? I see Apple wants $150 for their