REP-56071:Security check failed with error message:No privilege to do oper

Hi
I get the following error when I try to see the job status (..../rwservlet/showjobs?)
REP-56071: Security check failed with error message: No privilege to do the operation
I also get the following error on running any report on this server:
REP-110: Unable to open file 'Test.rdf'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file 'Test.rdf'.
Anyone seen the same issue before?

Fugured it out - had issues with reportserver.conf file.
_*                                                                                                                                                                                                   

Similar Messages

  • REP-56071: Security check failed with error message: Error code30009 - Gene

    REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
    Hello,
    I am also receiving the above error - these reports are deployed on our Portal - to which all registered SSO users should have access to.
    one more thing...
    We obtain the error only when execute under some "load", example: 15 reports running simultaneously.
    Tx,
    Diego.

    I am also facing this problem - I've deployed the reports on the Portal and authenticated users can access the reports.
    The problem is that when any authenticated user tries to access the report, on his very first access this error is shown.
    REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
    But after the user click on the Personalize link of the portlet and specify the parameters values(which are empty initially) then report runs fine.
    Plz let me know the solution as no user will like to see this error message for the first time he opens the report.
    Regards.

  • REP-56071: Security check failed with error message

    Hi!
    We have an Oracle 9iAS R2 v9.0.2.2 installation on Linux (Red Hat Advanced Server 2.1). We have installed PatchSet 2703110, 2581587 and 2842923.
    Oracle9i Reports version is: 9.0.2.2.0
    iAS and Infrastructure are on separate hosts.
    Trying to run Reports demo test.jsp or test.rdf we get the following message:
    javax.servlet.jsp.JspException: REP-56071: Security check failed with error message: Error code30001 - Cannot access the server:rep_dkipcias
    In package:wwv_rw_usr function:security_check
    Command line is: server=rep_dkipcias report=/repdemo/examples/Tools/test.jsp rundate="29-MAY-03 09:05:01"
    Found on Metalink the following Note: 216847.1
    This recommends to comment out the security and destination tags in ORACLE_MIDDLETIER_HOME/report/conf/<repserver>.conf file
    After commenting them out reports works fine.
    BUT
    at the end of the note there is a note which states that "Commenting out the security tag removes the integration of the reports server and portal."
    We need reports integration with Portal. We need SSO as well.
    Could you give any workaround for this problem?
    PS.: I have red Note:213171.1, Note:216118.1, http://otn.oracle.com/products/reports/htdocs/getstart/whitepapers/securing9i.pdf and BUG:2645629
    None of them gave any solution for the problem
    Thanks in advance,
    Andras Weintrauth

    Hi Jeff,
    Q(1): Yes.
    (Report Name and Servers tab)
    Report Server: REP_DKIPCIAS
    Oracle Reports File Name: test.jsp
    Execute: as JSP
    (Other tabs)
    Default values. Unchanged.
    Q(2): (Acces Tab of Report Component)
    Publish to Portal = checked
    Inherit Privileges from Portal DB Provider = checked
    (Acces Tab of Report Server Component)
    Inherit Privileges from Portal DB Provider = checked
    (SSO User)
    The user I try to run the report with has the following group assignments:
    Privilege Group
    PORTAL_ADMINISTRATORS
    PORTAL_DEVELOPERS
    DBA
    PORTLET_PUBLISHERS
    Additional Info:
    To be more specific: The mentioned security check failure exists outside of Portal as well. Eg. when we try to run the default portal test examples (test.jsp, test.rdf) from the iAS home page Demonstartions tab.
    Thank You in advance,
    Andras

  • Security API failed with error 60008

    HI, I have been tryng to wrap some files (or something like that) but when I select the files it comes up with an error box saying "security API failed with error 60008" can anyone help me fix this or tell me what it is?

    Launch Disk Utility and run Repair Permissions on the startup volume. Try whatever you were doing again. If there's no change, continue as follows.
    Triple-click the line below to select it:
    /private/tmp
    Right-click or control-click the highlighted line and select
    Services ▹ Show Info
    from the contextual menu.* An Info dialog should open.
    Does the dialog show "You can read and write" in the Sharing & Permissions section?
    In the General section, is the box labeled Locked checked?
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

  • Installing OS4 - restore fails with error message 1014 - 3GS unusable

    I tried to install OS4 on my 3GS iPhone. Process reported that a restore and update were required. The restore failed with error message 1014. This has rendered the phone unusable. Any help for me since Apple technicians from India weren't able to help.

    Anyone got this fixed, I also have the same problem. I got an error during update, then the iPhone went into Recovery Mode and iTunes says it has to be restored and updated, but the restore has taken over 15 hours know and Applecare told me to wait or come to an applestore... I'm on holiday in Europe and I have a 12 hour fligth in a few days back to the US...

  • _Media creation failed with error message: 'The system cannot find the path specified.'

    SCCM 2012 R2 CU2 all latest patches.
    I attempted to create a task sequence media and I get the error in the screenshot below. I have deleted and recreated the operating system,boot image, driver pack and task sequence. The usb media is 16GB and the task sequence size is 3004MB.
    I only see the error in CreateTSMedia.log as below. How do you fix this?
    <![LOG[Beginning media generation]LOG]!><time="12:37:44.522+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:418">
    <![LOG[Partition activated]LOG]!><time="12:37:47.720+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="diskvolume.cpp:849">
    <![LOG[Finished formatting volume F:\]LOG]!><time="12:37:55.723+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="imagewriter.cpp:772">
    <![LOG[Assigning staging directory to F:\]LOG]!><time="12:37:55.724+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="imagewriter.cpp:1122">
    <![LOG[===========================================]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:476">
    <![LOG[  Beginning pass to compute volume layout]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:479">
    <![LOG[===========================================]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:487">
    <![LOG[Setting up new volume]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:1297">
    <![LOG[WriteVolumeId()]LOG]!><time="12:37:56.257+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:1038">
    <![LOG[Failed to create media (0x80070003)]LOG]!><time="12:38:04.925+240" date="06-17-2014" component="CreateTsMedia" context="" type="3" thread="4668" file="createtsmedia.cpp:345">
    <![LOG[CreateTsMedia failed with error 0x80070003, details='']LOG]!><time="12:38:04.925+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="createtsmedia.cpp:355">
    <![LOG[MediaGenerator::~MediaGenerator()]LOG]!><time="12:38:04.925+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4668" file="mediagenerator.cpp:396">
    <![LOG[Media creation process that was started from Admin Console completed.
    ]LOG]!><time="12:38:05.182+240" date="06-17-2014" component="CreateTsMedia" context="" type="1" thread="4772" file="createmedia.cpp:1065">
    <![LOG[CreateMedia.exe finished with error code 80070003]LOG]!><time="12:38:05.182+240" date="06-17-2014" component="CreateTsMedia" context="" type="2" thread="4772" file="createmedia.cpp:1123">

    Hi,
    Error code 0x80070003 = "The system cannot find the path specified."
    Have you checked the log file smsAdminUI.log? Maybe it can give us some clues.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Trying to assign Security Baseline fails with error 24001

    We are trying to assign the Sample Security baseline updates to a cluster group in VMM.
    We have followed the steps here
    http://technet.microsoft.com/en-us/library/gg675110.aspx
    But the job to assign the baseline fails with the following:-
    Error 24001
    Update server operation failed with error: The specified item could not be found in the database.
    We are running VMM 2012R2 V 3.2.7510.0 on Windows Server 2012R2

    Remove wsus from VMM and add it again.
    This will fix the problem. Otherwise I Think cleaning SQL of missing update fixes the problem.

  • Programmatically generated emails sometime failed with error "Message included an invalid address".

    Hi, 
    I am facing a strange problem. I would appreciate if someone can help me. 
    Our application sends emails periodically (every 30 minutes). Initially emails send out correct but then the emails stop with error message "Message included an invalid address" after some time. 
    FYI, the devices are using MDS/BES connection. Contect protection is enable. etc. 
    Below is the code used to send emails:
    Message message = new Message();
    Address toAdd = new Address(emailTo, emailTo);
    Address toAdds[] = new Address[1];
    toAdds[0] = toAdd;
    message.addRecipients(Message.RecipientType.TO, toAdds);
    message.setSubject(subject);
    message.setContent(messageData);
    net.rim.blackberry.api.mail.Transport.send(message);
    Thanks for your time. 
    Sali

    I enabled the contect protection on my test device and then after few emails the emails show red cross when device was locked with the same error.
    So I believe the email does not go out when the content protection is enable and deice is locked. 
    Any idea to fix our email process?

  • Fiscal Year Change in MM failing with error message

    Hi I am with a company that is using SAP R/3 ECC6 Modules SD MM FI CO with COPA (costing based) for reporting. Our fiscal year runs 1 August to 31 July. I am a FICO support analyst, currently also filling in for SDMM until we complete recruitment of a new person in that post.
    In MM when trying to open the new period/close the old, we are getting the error message 'The specified year 2009 is not the current calendar year.' the detailed log says 'incorrect period in control record of CoCo. The current period (month/year is 112008)
    I have:
    1) Maintained our FYV in the IMG and it is set to year independent (tried making it year dependent but that didn't solve the problem)
    2)Set the apppropriate periods with correct year shift and texts
    3) Assigned the CoCode to the FYV
    4) Checked that the proper variant for posting periods are set.
    5) Set the Global parameters for the CoCode
    Financial postings work fine and there seems to be no problem with the FYV there, and everything worked Ok last year (our first with SAP since Go Live).
    I have searched the relevant sections in my SAP Press config manuals for FI and MM and done a search on Google but there must be something I am missing.
    Can anyone suggest a solution, please.
    Thanks in advance
    David

    Thanks anyway, Vijay, but OB52 is for changing Fiscal periods. That table is set correctly, the financial postings wouldn't be working if it wasn't.
    I hadn't checked OMSY, Syed, thank you for that suggestion. There are no entries in any of the fields for Year or FYr.  I am willing to make entries here to try it if there is a good reason but why would it have worked all through FY2008 without any entry in these fields but fail now in the new FY? The period change worked without problem for the past 12 months, isn't this the same as most SAP fields i.e. if you enter nothing then it is open for everything, in this case all years?
    I am using MMPV to try to open the new period but it is there that I am getting the error messages.
    Edited by: David Crossley on Aug 11, 2008 1:00 PM

  • Instance health check failing with errors

    Hi
    One of the instance showing " Agent connection is Instance is unavailable". How ever it is collecting and showing instance performance when I go to Performance pane.
    When I check in emagent.trc file it is saying either agent/instance are running with different user than ORACLE or group not DBA.
    Actually, in my case both are same.. l mean Oracle:dba.
    I have bounce many times agent but no luck.
    Your valuble comments helps greatly.
    Here is error message
    Target TARGET_NAME_INST1
    Type Database Instance
    Metric Health Check
    Collection Timestamp Jul 16, 2007 10:45:28 AM
    Error Type Collection Failure
    Message Instance Health Check initialization failed due to one of the following causes: the owner of the EM agent process is not same as the owner of the Oracle instance processes; the owner of the EM agent process is not part of the dba group; or the database version is not 10g (10.1.0.2) and above.
    ________________________________________________________________

    Use metalink - its your friend...
    Symptoms
    Caution:
    The scope of this note is limited to Agents 10.2.x monitoring Oracle Databases running on HP-UX.
    By default, the Agent 10.2.x is collecting the Healthcheck metric every 15 seconds. This metric basically gives an indication whether the monitored database is up and running.
    On some circumstances, the Healthcheck metric cannot be collected. This results in such entries being added every 15 seconds to the $AGENT_HOME/sysman/log/emagent.trc log file:
    2007-05-09 09:21:36 Thread-81 ERROR fetchlets.healthCheck: Error: process context is not initialized
    2007-05-09 09:21:36 Thread-81 ERROR engine: [oracle_database,EMI10104_rmtdchp4,health_check] : nmeegd_GetMetricData failed : Instance Health Check initialization failed due to one of the following causes: the owner of the EM agent process is not same as the owner of the Oracle instance processes; the owner of the EM agent process is not part of the dba group; or the database version is not 10g (10.1.0.2) and above.
    2007-05-09 09:21:36 Thread-81 WARN collector: <nmecmc.c> Error exit. Error message: Instance Health Check initialization failed due to one of the following causes: the owner of the EM agent process is not same as the owner of the Oracle instance processes; the owner of the EM agent process is not part of the dba group; or the database version is not 10g (10.1.0.2) and above.
    or
    Solution
    There are several steps to solve this problem:
    1. If the Agent Release is 10.2.0.1 or 10.2.0.2, upgrade the Agent to 10.2.0.3 and follow the steps below.
    2. For HP-UX 10.2.0.3 Agent, here are the instructions to fix the problem while keeping the Healthcheck metric enabled. This section takes place in the Agent Oracle Home.
    2.1. Download Patch 5854190 from Metalink.
    2.2. Setup the Agent environment and shutdown the Agent by doing:

  • Scheduling a Deski report fails with error message: "Failed to get property

    Hi,
    We have created few Desktop Intelligence report. Now when these report are schedules to be refreshed weekly (on Sunday), it fails with the following error message:
    "Failed to Get Property"
    Have tried to refresh the reports manually in Full Client too but the report fails there too.
    Have checked for the connection information. The servers are up and running.
    Have tried to re-create the connection and even tried to re-import and export the Universe.
    If we rename the report and save it and export, it works fine. Can not try this workaround as have more that 500 reports.
    Please suggest.
    regards,

    Hi Maria,
    usually the message "Failed to Get Property" is followed by an item name such as SI_FILE, or SI_VARIABLE, or SI_USE_ORIGINALDS, and so on.
    Could you please specify as much information coming from the error message as you can?
    Furthermore, is this issue happening with any Desktop Intelligence reports you schedule?
    Are the reports using the same Universe?
    Which DB are you using?
    Regards,
    Samanta F.

  • DST Check Failed With Error Code: 0TW460-6HN79Q-MFPX1A-60RD03 Pdt Name: HP Pavilion g6

    My laptop's screen is flickering so I ran the HP Diagnostics. The laptop failed the DST check with an error code. Need to know what this product code means.
    Details:
    Pdt Name: HP Pavilion g6
    OS: Win 8.1
    Error Code for DST Check Fail:  0TW460-6HN79Q-MFPX1A-60RD03
    Thanks,
    Ravi

    DST fail=  the hard drive is dead or dying and will need to be replaced. If you are still in warranty HP will send a replacement. If not a retail laptop SATA hard drive can be used. Just be sure to get one of at least equal capacity as the original in order to use Recovery Discs. It can be larger, but not smaller capacity.For instance if you have a 500GB hdd you could use a 750GB hdd but not a 320GB hdd.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Windows 10 upgrade fails with error message "we couldn't update the system reserved partition"

    HP and Microsoft both indicated my notebook was ready for upgrade to Windows 10, but when I tried to do the upgrade it failed - repeatedly - with the error message from Microsoft that "we couldn't update the system reserved partition." What to do?

    The system reserved partition serves a purpose.  If it is deleted, then the OS will not boot back up.  In which case you are toast.ON THIS PAGE, it tells what the partition is used for.-The Boot Manager and Boot Configuration Data : When your computer boots, the Windows Boot Manager starts up and reads the boot data from the Boot Configuration Data (BCD) Store. Your computer boots the boot loader off the System Reserved partition, and it boots Windows from your system drive. I advise that you not do what CanhThanh is instructing

  • Essbase LCM export on non-foundation machine fails with error message EPMLC

    Running an lcm utility command line export on a non- foundation machine fails with an error message:
    EPMLCM-30043: Unable to load the plugin class com.hyperion.essbase.lcm.ESBLCMPlugin
    bare in mind that:
    - other exports like planning and foundation metadata exports run succesfull on this non-foundation machine
    - running an essbase export from the foundation user interface succeeds too.
    What files can be missing or other issue can cause this?
    Detlev

    release transfer should work by steps what have you followed only requirement is to have create the similar namespace in the target software component first and then do the release transfer.
    one thing just try unchecking the target SWCV (original objects option at down it should work then)
    1.To release objectse from one SCV to another you need to follow the following procedure.
    Login to Integration Repository.
    Click on Tools -> Release Transfer. You can select the source & target interface or select individual objects if you want..
    If you need further clarifications do let us know.
    2.you may not have authorization to use Release Transfer so i would suggest use copyobject option to copy from one SWCV1 to SWCV2. right click on source select cop option change the SWCV
    Select the namespace under your SWCV. Go to Tools->Release Transfer.
    It will transfer all the objects under this namespace to the specified SWCV.
    For reference plese see the following documents:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/e8/e8573ba5f13048be50532fc3fcea9c/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/18/23078bdbd241f08efb3e36cf10c9d0/frameset.htm
    Or else you can select individual objects under the namespace and right click on the object and select Copy Object. You will get a dialog box where you can select the new location where you want to copy this object.

  • Project Server 2010 - Update Scheduled Queue job failed with error message" Error no 131- AssignmentAlreadyExists"

    Hello,
    When I tried to update the schedule of the project , the job failed with the error message " AssignmentAlreadyExists". I further looked into the ULS logs but it wasn't that helpful.
    This is the message I found in ULS logs "type = UpdateScheduledProject failed at Message 5 and is blocking the correlation Errors: AssignmentAlreadyExists,Leaving Monitored Scope (FillTypedDataSet -- MSP_WEB_SP_QRY_ReadTimeSheetAssignmentsAndCustomFieldData).
    Execution Time=398.730006187937"
    Pplease help me to understand the root cause of this problem.
    I have verified all the assignments in the plan and I did not find any duplicates.
    Thanks in advance.
    Sesha

    This issue might need detailed troubleshooting, I would suggest you raise a support case with Microsoft.
    Cheers! Happy troubleshooting !!! Dinesh S. Rai - MSFT Enterprise Project Management Please click Mark As Answer; if a post solves your problem or Vote As Helpful if a post has been useful to you. This can be beneficial to other community members reading
    the thread.

Maybe you are looking for