Repair broken Oracle cluster on Win 2000

I have an Oracle cluster (8.1.7. with OFS) running in a Windows 2000 AS environment. There are two nodes and -luckey me- it is on a test network.
A while ago I tried to install OEM in order to be able to configure a OMS.
I performed the install on the inactive node without stopping the Oracle (cluster)services (stupid, stupid....) and broke it off when it hung at the end.
From that moment on this node is no longer available for failover in the cluster. This operation seems to have affected this node's Oracle home. Later on I performed a de-install but this did'nt help.
Now I wonder:
is it possible to repair this 'broken' cluster and if so what would be the procedure to follow?
Thanks in advance,
Georges

At last I solved the problem myself.
On both nodes I desinstalled all Oracle products (Server, Fail Safe..) and later installed them again (first Oracle EE on both nodes, then OFS on both nodes).
Mind that all the fysical files for my databases were still available on SAN disks!
With the ORADIM utility I created services for my two databases on one node.
I recreated the Oracle clustergroup and added the necessary disk resources etc with Cluster administrator (Win2000).
I started Fail Safe Manager and added (one by one) my databases as standalone resources to the Oracle group and went through the verification process without warning.
Now everything is working fine again...

Similar Messages

Connecting to Oracle 8i in Win 2000

Hi All,
When i try to connect forms6i with the DB[Oracle 8i] in Win 2000 I get an error stating TNS could not resolve service name. The error number is ORA-12154.
Thanx
null

Hi "User", seems you have the same problem
like all that do their first-time install :-)
Forms uses a different Oracle_HOME (required by setup), and hence does not "see" the "settings" of the normal client.
Try the following:
- Set up a connection with NET80-Tools
- Test with SQL*PLUS
- Copy "tnsnames.ora" from the Client-81-Home
to the forms-Home, e.g.
cd ORACLE/FORMS/NET80/ADMIN
copy ORACLE/ORA81/NETWORK/ADMIN/tnsnames.ora
Of course, you'll have to check for YOUR
directory names...this is just a samples, resp. mthe setup of a machiche I configured yesterday. HTH.
/M.
null

What i need to have to run oracle 10g on win 2000 server.

hi,
I want to install oracle 10g on win 2000 server,what should I need to do to install oracle 10g.
thanks Alok kumar

Hi...
Try check http://tahiti.oracle.com
There are complete documentation and also installation guide for Windows where pre-requisites are included.

Weblogic 6.1 with Oracle 9i on Win-2000

Hi
Is there a driver that is compatible for Weblogic 6.1 and Oracle 9i(9.0) on Windows
2000 environment? I tried the classes12.zip from oracle home\sid\jdbc\... but
the error I get is "No suitable Driver found"..when the Connection Pool starts.
Please suggest the right way...
Thanks
Ankur
Principal Consultant
Keane Inc.
603-682-7035

Ankur,
Not yet, but expected soon. Please download the one from oracle's site.
Ankur Sinha wrote:
Hi
Is there a driver that is compatible for Weblogic 6.1 and Oracle 9i(9.0) on Windows
2000 environment? I tried the classes12.zip from oracle home\sid\jdbc\... but
the error I get is "No suitable Driver found"..when the Connection Pool starts.
Please suggest the right way...
Thanks
Ankur
Principal Consultant
Keane Inc.
603-682-7035

Oracle 10g problem on win 2000 server!!

Hi,
I have installed oracle 10g on win 2000 server with service pack 4 to my home machine but the problem I am facing is that when I start my db on the system my system gets slow it consumes most of the Ram.I alter few SGA parameters in init.ora file but the problem continues to be effect me.I need to get around that problem asap hope you guys help me as u did in past....
thanks a lot...

Hi,
It's 128MB should i expand it? or what abt oracle 9i if i uninstall of oralce 10g.act I was earlier using oralce 9i.I would like to know that all the commands which used to support to oracle 9i will it support completly to 10g.
thanks a lot..

Starting weblogic cluster and admin server on Win 2000 platform

Hi! Here's my problem scenario:
I'm running my WLS 8.1 application as WLS cluster on Win 2000 platform. I have
3 replicated WLS servers in my cluster and of course one WLS server as admin server
(4 WLS servers all together). I'm starting my WLS application using Win services
which behind a scene call win 2000 comand interpreter batch-file to start the
servers. Currently I have 4 different win 2000 services each calling different
batch-files to start a WLS server (4 all together). Here's my question:
Is there any way to start my cluster (3 managed WLS servers) and WLS admin server
from single win 2000 command file (using single win 2000 service). Using win 2000
AT-command interpreter command I can start executables and command(s) and command-files
at background at specific date and time, but I want to start my WLS application
on every win 2000 platform boot, is there any way to achieve this ???
Best Regards!
Jami

hi,
Thanks for stepping up!
But I wasn't using any clustering or loadbalancing.
Just a simple Admin server, Managed server set up.
256 Meg, Pentium box running Win 2000 premium edition.
I tried tweeking around the heap size too.... coz' the operations were slogging
like anything...
Bal
"Raja Mukherjee" <[email protected]> wrote:
It seems like network issue....do you have Windows Clustering/Load Balancing
service turned on by any chance? I would also use netmon to see the traffic
between the ips....
..raja
"Bala" <[email protected]> wrote in message
news:3b3a6c00$[email protected]..
hi,
I am looking at a strange behaviour with WLS6.0SP1 installed on WINDOWS2000 Premium.
I brought up the Admin server and a Managed server. After a while theAdmin Server
is compeletely
losing the control of the managed server (for no reason).
when I tried monitoring the managed server from the console, I couldnot
access
the manager server
and the status down (red ball). I tried restarting the Admin Server
in the discover mode - NO LUCK.
But when I restart the Managed server and go to the Web Based Admin
Console and refresh, it worked. But I dont think we should be doingthat
in a
production environment.
Did anybody come across such a problem before ???
Is this a problem with Win 2000 ???
coz' it never happened with NT workstation
thanks in advance

Installing Oracle 8.1.7 with PS on Win 2000 cluster

Sorry for bad English.
I'm have problem. I have Oracle 8.1.7 with PS. I need setup Oracle with Parallel Server on cluster with Windows 2000 AS, but during setup Oracle no found cluster. In documentation talk about need Operation System Depend layer from vendor OS.
What me do? Where take OSD? Where reason?

Hi Satish,
You need to install "Oracle Data Provider for .NET" on the target machine, and it needs to be the same version as the one you used to build the assemblies.
Christian Shay
Oracle

Oracle 8.1.6 On Win'2000 Server 5.00.2195 SP1

I tryed to Installed Oracle 8.1.6 On Win'2000 Server 5.00.2195 (Stardard Edition) SP1....The Moment I clicked on Oracle Universal Installers mail page "Install" the page closes down and the next page never comes...
Please Help !!!!!

Hi,
I don't have a suggestion, but I can say that I am running fine with the exact same configuration. Win2k server, sp2 and Oracle 8.1.6.

Problem installing Oracle 9i database entreprise edition on win 2000 server

Hi,
I am trying to install the oracle 9i database 2.0(release2) on Win 2000 server and get this error message.
"Couldn't connect to the server - Please check the network and that server daemons are running. (Socket error 10061).
Could somebody help...........
Thanks in advance.
Maya

hi,
try to install service pack for windows 2000 and try.

Oracle 9.2.0.3 or 9.2.0.4 on Win 2000

In the OTN downloads page, I see that I can download the database for version 9.2.0.1 (Standard Edition), for Win 2000.
I have been informed that the Developer Suite for 9i, with the 9.2.0.6.0 patch, is certified to run with database 9.2.0.3 or 9.2.0.4.
My question: Is database 9.2.0.3 (or 9.2.0.4) also available as an OTN download? If so, how can I access it?
Alternately: Does anyone have reliable information as to whether Developer Suite 9i (with patch 9.2.0.6.0) can also run against database 9.2.0.1? (All on Win 2000).
I am stressing the patch 9.2.0.6.0 issue, as I am told that prior to this patch, there were problems with setting up the Repository (needed for working with Designer).
Thanks in advance for any information on this.
Eliram Braudo

Nope. There is no Database 9.2.0.3 for Win 32-bit (cd-pack/full release).
There is Database 9.2.0.1 (full release) and Patch Sets that brings it up to 9.2.0.3 (or .4 or .2). Patch Sets are, as I know, only available from Metalink with a valid support contract.
Note that AS and DS are 9.*0*.2. (confusing, yeah!)
Here on OTN we can find:
Oracle9i Designer Release 9.0.2.6.0 - a full, patch release for Oracle9i Designer
(You must install this over your Oracle9i DS installation)
Note the difference - patchset is for Designer/Repository 9i as part of DS, not the whole DS product stack (latest patchset for Forms & Reports is 9.0.2.3 I think). Patching Oracle (except for DB) is messy as always I guess ;)
I would guess that Oracle Support recommends to have DS patchset 9.0.2.2 installed also...
And cert info includes a requirement for at least 9.2.0.3 (DB) so I guess you have smoe patching to look forward to ;-D
Hth
Fredrik

Error while checking the status of Oracle Cluster ware

Hi
I was trying to install the database using dbca after setting up the grid and database software on LINUX x86-64 RHEL 5.7 machine. The database software version is 11.2.0.3. It throwing the error regarding the connectivity of clusterware. So I checked the status of clusterware.
-bash-3.2$ ./crsctl stat res -t
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4000: Command Status failed, or completed with errors.
-bash-3.2$
But when I ran below one:
-bash-3.2$ ./crsctl stat res -t -init
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.asm
1 ONLINE ONLINE sfv9699 Started
ora.cluster_interconnect.haip
1 ONLINE ONLINE sfv9699
ora.crf
1 ONLINE ONLINE sfv9699
ora.crsd
1 ONLINE OFFLINE
ora.cssd
1 ONLINE ONLINE sfv9699
ora.cssdmonitor
1 ONLINE ONLINE sfv9699
ora.ctssd
1 ONLINE ONLINE sfv9699 OBSERVER
ora.diskmon
1 OFFLINE OFFLINE
ora.drivers.acfs
1 ONLINE ONLINE sfv9699
ora.evmd
1 ONLINE INTERMEDIATE sfv9699
ora.gipcd
1 ONLINE ONLINE sfv9699
ora.gpnpd
1 ONLINE ONLINE sfv9699
ora.mdnsd
1 ONLINE ONLINE sfv9699
So i saw that the crsd having some issue. I checked the alert log and crsd log. Below are the output.
Alert <server_name>.log
2012-10-20 15:37:51.408
[ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
2012-10-20 15:37:52.968
[crsd(5188)]CRS-1013:The OCR location in an ASM disk group is inaccessible. Details in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
2012-10-20 15:37:52.984
[crsd(5188)]CRS-0804:Cluster Ready Service aborted due to Oracle Cluster Registry error [PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
]. Details at (:CRSD00111:) in /oracle2/app/11.2.0/grid/log/sfv9699/crsd/crsd.log.
2012-10-20 15:37:53.471
[ohasd(3694)]CRS-2765:Resource 'ora.crsd' has failed on server 'sfv9699'.
2012-10-20 15:37:53.472
[ohasd(3694)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
CRSD.log
2012-10-20 15:37:52.456: [ CRSMAIN][3563381328] Checking the OCR device
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Sync-up with OCR
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Connecting to the CSS Daemon
2012-10-20 15:37:52.457: [ CRSMAIN][3563381328] Getting local node number
2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
[   CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
2012-10-20 15:37:52.897: [ OCRASM][3563381328]proprasmo: Error in open/create file in dg [DATA]
[ OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
2012-10-20 15:37:52.898: [ OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: The ASM instance is down
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: Failed to open [+DATA]. Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
2012-10-20 15:37:52.968: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
2012-10-20 15:37:52.969: [    GIPC][3563381328] gipcCheckInitialization: possible incompatible non-threaded init from [prom.c : 690], original from [clsss.c : 5326]
2012-10-20 15:37:52.975: [ default][3563381328]clsvactversion:4: Retrieving Active Version from local storage.
2012-10-20 15:37:52.978: [ CSSCLNT][3563381328]clssgsgrppubdata: group (ocr_SFV9699-cluster) not found
2012-10-20 15:37:52.978: [ OCRRAW][3563381328]proprio_repairconf: Failed to retrieve the group public data. CSS ret code [20]
2012-10-20 15:37:52.981: [ OCRRAW][3563381328]proprioo: Failed to auto repair the OCR configuration.
2012-10-20 15:37:52.981: [ OCRRAW][3563381328]proprinit: Could not open raw device
2012-10-20 15:37:52.981: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
2012-10-20 15:37:52.983: [ OCRAPI][3563381328]a_init:16!: Backend init unsuccessful : [26]
2012-10-20 15:37:52.984: [ CRSOCR][3563381328] OCR context init failure. Error: PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.984: [ CRSMAIN][3563381328] Created alert : (:CRSD00111:) : Could not init OCR, error: PROC-26: Error while accessing the physical storage
ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.984: [    CRSD][3563381328][PANIC] CRSD exiting: Could not init OCR, code: 26
2012-10-20 15:37:52.984: [    CRSD][3563381328] Done.
=======================
I see in the above log that saying ASM instance is down and failed to open +DATA .
But the asm instance up and running
SQL> select instance_name,status from v$instance;
INSTANCE_NAME STATUS
+ASM1            STARTED
And we havent created any disk named DATA before the installation. We have created only below two disks
SQL> select name,header_status from v$asm_disk;
NAME HEADER_STATUS
ASM_DATA MEMBER
FLASH_RECOVERY MEMBER
But I am seeing a diskgroup in the v$asm_diskgroup which we havent created.
SQL> select name,state from v$asm_diskgroup;
NAME STATE
DATA MOUNTED
Ya this is a second time installtion. In the first installtion we created the asmdisk as DATA. But later everything (RAW device ) was formatted and this new disks has been created and installtion again started
[root@SFV9699 bin]# oracleasm listdisks
ASM_DATA
FLASH_RECOVERY
Seems like its trying to read the old disk DATA.
we have done asmscanning too with oracleasm scan disks. but no use.
Where I can remove the old entry of DATA disk.
It would be a great if a quick response get.
Thanks
SHIYAS M

The permission looks fine. If it was permission issue then y it is trying to read the DATA disk which I havent created this time at all ( But created in the first installation).
2012-10-20 15:37:52.459: [ CRSMAIN][3563381328] Initializing OCR
[ CLWAL][3563381328]clsw_Initialize: OLR initlevel [70000]
2012-10-20 15:37:52.897: [ OCRASM][3563381328]proprasmo: *Error in open/create file in dg [DATA]*[ OCRASM][3563381328]SLOS : SLOS: cat=7, opn=kgfoAl06, dep=27140, loc=kgfokge
2012-10-20 15:37:52.898: [ OCRASM][3563381328]ASM Error Stack : ORA-27140: attach to post/wait facility failed
ORA-27300: OS system dependent operation:invalid_egid failed with status: 1
ORA-27301: OS failure message: Operation not permitted
ORA-27302: failure occurred at: skgpwinit6
ORA-27303: additional information: startup egid = 1000 (oinstall), current egid = 10002 (dba)
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: kgfoCheckMount returned [7]
2012-10-20 15:37:52.967: [ OCRASM][3563381328]proprasmo: The ASM instance is down
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: *Failed to open [+DATA].* Returned proprasmo() with [26]. Marking location as UNAVAILABLE.
2012-10-20 15:37:52.968: [ OCRRAW][3563381328]proprioo: No OCR/OLR devices are usable
2012-10-20 15:37:52.968: [ OCRASM][3563381328]proprasmcl: asmhandle is NULL
The only disks created are
[root@SFV9699 dev]# oracleasm listdisks
ASM_DATA
FLASH_RECOVERY
And these disks are showing part of that group also.. Not quite sure how this happened..
what abt dropping this group.. will anything work.

9i installation problem on a Win 2000 P4 PC

Hi,
Although I am new to Oracle, with the help of documentation I successfully managed to install it on a Window 2000 PC without any major problems except for the one described below.
The problem is this:
When the PC was part of a campus domain (e.g., claflin.edu) I got "end-of-file on communication channel" and "internal error. hostdef extension doesn't exist" errors repeatedly many times during installation but I didn't get any when the PC was taken off the network and added to a workgroup.
Is there something I need to do to make it work on a network? Has anyone seen this same behavior on Win 2000 or is it something unique in my case?
By the way, I am also running the personal web server (PWS) in the same PC.
Any help will be greatly appreciated.
Thanks
Kuha M.

Hi Eric,
Ther should not be any problem in stalling NWDS SP9. Your case the problem may be
1)Insufficient Disk Space
2)Outdated vesrion of JDK
3) you might not have been downloded full fledged NWDS SP9 installer.
4)May be while installing NWDS it is not able to locate JDK in Directory.
if you check all these, i hope it will work!!!.
Regards,
RK

Error while installing Oracle Cluster Ready Services Release 1 (10.1.0.2)

Hi all,
I am trying for RAC 10gR1 (10.1.0.2) using two machines with Windows 2000 Server. For this I need to install Oracle Cluster Ready Services Release 1 (10.1.0.2).
Machine details are as follows:-
Node 1:
Computer Name:     RAC1
Windows 2000 IP Configuration
Ethernet adapter Local Area Connection 2: (Used for Public Interface)
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.1.65
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection: (Used for Private Interface between the two nodes)
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 10.10.10.11
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Node 2:
     Computer Name:     RAC2
Windows 2000 IP Configuration
Ethernet adapter Local Area Connection 2: (Used for Public Interface)
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 192.168.1.181
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
Ethernet adapter Local Area Connection: (Used for Private Interface between the two nodes)
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 10.10.10.12
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
I have made following entries in Hosts file of both the machines:-
192.168.1.65     RAC1
192.168.1.181     RAC2
10.10.10.11     RAC01-PRIV
10.10.10.12     RAC02-PRIV
192.168.1.201     RAC01-VIP
192.168.1.202     RAC02-VIP
I have completed all the pre-installation steps, i.e. configuring the disk for storage, and both the machine are communicating each other through there Private and Public interfaces. Now the problem appears when I am installing Oracle Cluster Ready Services, at the end of Installation following message appears and the auto configuration steps fails.
================================================================================================================
Output generated from configuration assistant "Oracle Cluster Ready Services Configuration Assistant":
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: rac1 rac01-priv rac1
node 2: rac2 rac02-priv rac2
Creating OCR keys for user 'administrator', privgrp ''..
Operation successful.
Now formatting voting device: \\.\votedsk
Successful in setting block0 for voting disk.
Format complete.
Step 1: checking status of CRS cluster
Step 2: configuring OCR repository
Step 3: configuring safe mode for CRS stack
Step 4: Starting up CRS stack on all nodes
RAC1 service OracleCSService in improper PENDING state, err(997)
RAC2 service OracleCSService in improper PENDING state, err(997)
Configuration assistant "Oracle Cluster Ready Services Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Notification Server Configuration Assistant":
Configuration assistant "Oracle Notification Server Configuration Assistant" failed
================================================================================================================
Output generated from configuration assistant "Oracle Private Interconnect Configuration Assistant":
PRIF-10: failed to initialize the cluster registry
Configuration assistant "Oracle Private Interconnect Configuration Assistant" failed
===============================================================
I would be highly obliged if any one tell me why it is happing like this and what could be the possible remedy.
Waiting for the respone.
With Regards
Dinesh
[email protected]

Hi user478171,
I have the same problem with two nodes in Windows 2003 with RAC 10g R2, but I don't have idea to solve.
Please advice me
Thanks advances
regards,
IvanR

Enterprise Manager Console does not start on Win 2000 Pro

I have installed Oracle 9i Release 2 Enterprise Manager on Win 2000 Professional. But the Enterprise Manager console does not start. Also the EM Configuration Assistant does not start.
I have installed many times, but it is never successfull.
I was installing Enterprise Edition -> General Purpose database.
Tried the following from command prompt:
oemapp.bat I get this message : "Usage: oemapp <application_name>"
oemapp consoleI get : "bad command or file name"
oemapp console oem.loginmode=standaloneI get : "bad command or file name"
Is there any post installation configurations that need to be done?
When I read thru the oemapp.bat, "Usage: oemapp <application_name>" was under the jreSetup module.
Under C:\Program Files\Oracle\jre I have the folders with following Names(versions) 1.1.8 and 1.3.1.
In the environment variable also I have C:\Program Files\Oracle\jre\1.1.8\bin and C:\Program Files\Oracle\jre\1.3.1\bin
Could some one help me with this.
Thanks,
Aruna

Marcus,
Is your machine connected to a Novell network? If so, edit the oemapp.bat file and change every reference of Windows_NT to WINNT. The issue is Novell does not set the Windows_NT variable, and uses the WINNT variable instead.
Jim

SAP R/3 4.7 INSTALLATION ON WIN-2000 ADVANCED SERVER.

Hello!
IS THERE ANYONE WHO CAN HELP ME?????????
Dear, plz. Give me the steps for sap r/3 installation on win 2000 advanced server.
I am not having password for sap community market place.
So, iam not able to get the steps for installation I AM HAVING THE FOLLOWING CD'S
1) SAP 4.7 GUI
2) JAVA
3) SAP KERNEL
4) ORACLE 9.2.1- 3 CD'S
5) SAP EXPORT- 7 CD'S
Plz. Help me in this.plz.mail me on my ID- [email protected]
Thanks & regards,
Sandeep Chaudhary
m-09312406060
0129-3260483,4120483

how come you have the cds and no access to sapnet? strange....
basically these are the steps:
-> install win 2k server
-> check for all hardware and software requirements (needed for sap installation)
-> install oracle server 9.2 and the appropriate patchset (being 9.2.0.8 at the time) and the interim patches (opatch)
-> install sap central instance using sapinst (you will be asked for the different cds such as java, kernel etc.)
-> install sap database instnace using sapinst (you will be asked for the different cds such as java, kernel etc.)
-> apply post-installation steps
but: without the installation guide and the relevant sapnotes it will be difficult to succeed....get access to sapnet asap!
GreetZ, AH

Repair broken Oracle cluster on Win 2000

Similar Messages

Maybe you are looking for