Repair mode in iTunes

Hi all,
For some reason iTunes gives me a pop-up that my iPod photo has been flagged for repair mode and the only way to use it (in combination with iTunes) is to comply with the request.
However after doing so (losing all my music on the iPod) and having followed the steps by the letter (plugging the thing into the wall socked etc etc) the same error appears.
I also own an iPod mini but this one gets the exact same pop-up in iTunes...
Does anybody have any idea why iTunes is forcing the iPods to be repaired??? And better yet does anybody have a solution as I can no longer update then.
p.s. the iPod mini, I did not repair and it is working fine. The iPod photo works fine (but simply is empty now)
THANKS!!!

Does it say "recovery mode" rather than repair mode?
If so, that can sometimes be caused by a Windows drive letter confusion. For troubleshooting advice on that possibility, see the following document:
"iTunes has detected an iPod in recovery mode - Use iTunes to restore"

Similar Messages

  • HT201442 my phone was in the middle of updating its software and then suddenly switched off and ive tried to reset it but the itunes symbol appears, I've tried to connect it to itunes but it says it needs to be restored as it is on repair mode.

    My Iphone4S was in the middle of updating its latest software then suddenly it switched off, it hasnt turned on since and I've tried to reset it but only the apple sign appears then the plug into ittnes symbol. I've tried to plug it into itunes but it says my phone is on repair mode which is why it needs to be restored first in order to connect to itunes. I have also then tried to restore it but the error sign appears.

    http://support.apple.com/kb/HT1808

  • I factory restored my iphone and now it is stuck in repair mode. i cannot connect to itunes to restore as i get error "itunes cannot find disk"

    i restored my iphone4 to factory settings because it was running slow and some apps werent working. My phone is now stuck in repair mode and is continually rebooting itself. I know the usual solution would be to restore via itunes but itunes will not allow me to do anything as i get the error "itunes cannot find disk"

    Place your phone in DFU mode (search Google) and restore

  • Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel...

    I have done all the steps that I could find, and I am still having this issue...can someone help me please?
    Here is the diagnostics test I just ran as well. Not sure why it wont read my ipod either.
    Microsoft Windows Vista Home Basic Edition Service Pack 2 (Build 6002)
    Dell Inc. Inspiron 1525
    iTunes 11.1.5.5
    QuickTime not available
    FairPlay 2.5.16
    Apple Application Support 3.0.1
    iPod Updater Library 11.1f5
    CD Driver Not Available
    CD Driver DLL Not Available
    Apple Mobile Device 7.1.1.3
    Apple Mobile Device Driver 1.62.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 00D5BEA809F38F28
    Current user is an administrator.
    The current local date and time is 2014-04-05 12:39:11.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    Intel Corporation, Mobile Intel(R) 965 Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {F45D6408-EDE8-4F4F-8BDF-AE815F918114}
    Description:            Dell Wireless 1505 Draft 802.11n WLAN Mini-Card
    IP Address:             192.168.0.16
    Subnet Mask:          255.255.255.0
    Default Gateway:    192.168.0.1
    DHCP Enabled:      Yes
    DHCP Server:         192.168.0.1
    Lease Obtained:     Sat Apr 05 12:21:08 2014
    Lease Expires:       Sat Apr 05 13:21:08 2014
    DNS Servers:         68.105.28.12
                                    68.105.29.12
                                    68.105.28.11
    Adapter Name:        {8F15FB4D-2EE6-4690-A8E7-82ACBF7A4F1E}
    Description:            Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller
    IP Address:             0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:      Yes
    DHCP Server:        
    Lease Obtained:     Wed Dec 31 17:00:00 1969
    Lease Expires:       Wed Dec 31 17:00:00 1969
    DNS Servers:        
    Active Connection: LAN Connection
    Connected:             Yes
    Online:                    Yes
    Using Modem:        No
    Using LAN:             Yes
    Using Proxy:           No
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2014-04-05 12:38:45.
    **** CD/DVD Drive Tests ****
    LowerFilters: PxHelp20 (2.0.0.0),
    No drivers in UpperFilters.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
    **** Device Connectivity Tests ****
    iPodService 11.1.5.5 is currently running.
    iTunesHelper 11.1.5.5 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) ICH8 Family USB Universal Host Controller - 2830. Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2831. Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2832. Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2834. Device is working properly.
    Intel(R) ICH8 Family USB Universal Host Controller - 2835. Device is working properly.
    Intel(R) ICH8 Family USB2 Enhanced Host Controller - 2836. Device is working properly.
    Intel(R) ICH8 Family USB2 Enhanced Host Controller - 283A. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    RICOH OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
    Most Recent Devices Not Currently Connected:
    iPod touch (4th generation) running firmware version 6.0.1
    Serial Number:       CCQH8BRSDT77
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    CD Driver Not Available
    CD Driver DLL Not Available
    With that one, I'd start with solution 3 from the following document:
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install

  • Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode?

    Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.

    Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
    iTunes for Windows: How to turn off Compatibility Mode

  • Getting error message that states itunesexe has been set to run in compatibilty mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it .How do i turn off compatibility mode?

    recieved error message that states" itunes exe has been set to run in compatibility mode for an older versions of windows for best results turn off compatibility mode for itunes before you open it. How do i access compatibility mode and turn it off ? Believe i have Windows 7.

    Try the following document, only be sure that none of the boxes in the compatibility tab are checked (not just the compatibility mode box itself): 
    iTunes for Windows: How to turn off Compatibility Mode

  • HT201210 When I updated my iphone 5 to ios 7, it will not allow me to sync to my itunes on my pc. I get a message that says, "A required iTunes component is not installed. Please repair or reinstall iTunes. (-45019)". I am using Windows 8 and dont know ho

    Yesterday I updated my iPhone 5 to IOS 7. Today I try to sync up itunes and downloaded the updated version. When I open it up I get the message, " A required iTunes componentis not installed, please repair or reinstall iTunes. (-45019). I am using Windows 8 and have no clue how to fix this.

    Use the instructions here to completely remove/uinstall all iTunes/Apple software and componenets and then start from scratch.
    http://support.apple.com/kb/HT1923
    B-rock

  • HT1212 I have an iphone 3 which has been disabled, I've put it into recovery mode but itunes won't connect to it. I know the password but the device wn't give me the option to add it. What else can I do to enable the device. I can't wipe it from the cloud

    I have an iphone 3G which has been disabled after a child tried to get into it. Itunes will not connect until I have put the passcode in but the device will only enable emergency calls and does not allow a passcode to be put in. I have put it into recovery mode and itunes can't see it. There is currently no SIM card in it and it's not connectng to the wifi so I can't wipe it from the cloud. Any ideas how I can get into it?

    iPhones require a SIM for activation.
    Put the device in DFU mode (google it) and restore via iTunes.

  • My ipod touch is stuck in repair mode how do i fix it?

    my ipod is stuck in repair mode, how do i fix it?

    Hi,
    Tap twice with 3 fingers. Then go to Settings>General and scroll down to Accessibility and turn Zoom off.
    Ben

  • I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work.

    I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work. I then restored my computer to a week ago and tried to download and install the update and this came up again.

    Check out this thread:
    https://discussions.apple.com/thread/3677426?start=0&tstart=0

  • Pls.help my iphone stuck in recovery mode and itunes wont recognize it..i tried the other options that posted here,,,pls tell me what to do..

    pls. help my iPhone stuck in recovery mode and iTunes wont recognize it..i tried the other options that posted here,,,pls tell me what to do..before it was just stuck in an apple logo but when i tried recovery mode to itunes then it stuck..

    Hi awison,
    If your iPhone is not recognized by iTunes on your Windows computer you may want to use the steps in this article to troubleshoot -
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    This may also resolve your recovery mode issue. If it does not, use the steps in this article to resolve it -
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • When I start iTunes I get the following message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)" I have installed the latest version of iTunes but still get this message. Can anyone help.

    When I start iTunes I get the following message. "A required iTunes component is not installed. Please repair or reinstall iTunes (-42404)". I have installed the latest version of iTunes but still get this message. Can anyone help?

    Hello mustangcim243,
    iTunes has various components bundled with it that it requires for general usage. I advise that we completely remove iTunes and all of these related components, verify that they have been removed, then reinstall. To do so, please follow the steps in this article:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Note: it is important to remove the 7 components in order. Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
    If the above does not resolve your issue, I recommend we reset the SC Info folder:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/TS1389
    (See Step 4: Remove the SC Info folder)
    Thanks,
    Matt M.

  • I have a 3gs. I tried to update the ios today. Now my phone is stuck in recovery mode and itunes is not recognizing. I also tried DFU mode, still nothing. I have uninstalled itunes and reinstalled. Help.

    I have a 3gs, and I haven't updated it for a long time because I always have issues when I do. I tried to update the ios today, and it decided to update it to 6.1.3 instead of 7, I didn't think there would be a problem, so I clicked ok. When I came to check on my phone, itunes said there was an error with the update, and my phone was in recovery mode (plug-in sign on the screen). I looked up multiple things to try, I tried putting it in DFU mode, still itunes doesn't see it. The computer also doesn't list it under devices, however when it is plugged in the Apple Mobile Support USB Driver shows up in device manager. I have tried uninstalling itunes and reinstalling, still nothing. I just want to know if there is anything else I can try. Thanks.

    No, it is my phone that I've had since 2009. I just hate updating it because every time I do something goes wrong. So I put it off as long as possible. I am getting a new iphone, but I read that to have your backup transfer to the new phone, it must be a backup from the current ios.

  • I started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?

    started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?

    Any numbers or other details on the mesages given?
    Did you try to connect in recovery mode again? iOS: Unable to update or restore
    In case your network connection timed out, check your security software settings: iTunes for Windows: Troubleshooting security software issues

  • How do I turn 'off' compatibility mode in iTunes.

    How do I turn off compatibility mode in iTunes.

    Try the following document, only be sure that none of the boxes in the compatibility tab are checked (not just the compatibility mode box itself):
    iTunes for Windows: How to turn off Compatibility Mode

Maybe you are looking for

  • How to SaveAS and SaveAs on different volume in TextEdit?

    i am having a bit of a battle with the new features for saving in Lion and while i /sort/ of get it i am not doing very well in TextEdit. wondering if someone wouldn't mind helping me out. i have created a new document and upon running the first Save

  • How to image trace multiple objects at once on Illustrator CC?

    Hello, This may sound like a stupid question, but I am having troubles trying to image trace multiple objects all in one go. I'm currently working on Illustrator CC and I remember this process being a lot easier to do on Illustrator CS5. I have a typ

  • Using Hash in oracle 9i

    can ne body give me an example of using hash with source code I would like to use hash tables for storing passwords, Basically I am looking for a secure way to store users, and passwords Message was edited by: user448429

  • Starting managed servers after rebooting

    Hi: I have been trying to configure my WebLogic environment to start the managed servers in a domain automatically when the machine is rebooted. I have done some testing with Node Manager but, as I understood, Node Manager only restarts a server if i

  • Receiver service not running

    ZEN 4.0.1 server. Regional servers' inventory working, trying to send to our root server. Message in log states Message: 329: The receiver service on the server ZEN1_ZenInvService is currently down. I've tried to start it at the console , but it does