Repair permission Boot Camp HD partition

Hello
I have ran into a problem with the partition. I did not see a thread on this so thought I would start one exclusively on this problem.
I have repaired permissions via the install disk, but cannot partition the drive. I have also updated Firmware on my MacBook, using osx10.4.6.
There are no other emulation type programs running on my Mac that allowed the use of xp previously. Any help appreaciated.
thanks

Thanks for the replies.
The firmware has been updated via the firmware link above. However I am still unable to partition the drive, even at the default size of 5gig. I have over 50 gig available to play with.
Has anyone been forced to do a reinstall of OsX to get Boot camp to work? And did you have any problems after?

Similar Messages

  • How to separately backup the Boot Camp drivers partition from Leopard DVD?

    I used Disk Utility and my only (and expensive) DVD+R DL disc to make a backup copy of my Leopard DVD, and it worked perfectly to install Leopard on my MacBook Pro.
    However, that was before I learned that the Boot Camp drivers was now on a separate, PC-only partition on the DVD. So while my backup copy works great to install Leopard, I have no backup of the Boot Camp driver CD.
    I tried several tricks, including booting into Windows Vista and using PowerISO to attempt to make an ISO image of the Boot Camp driver partition (shows up as 400 MB or so). However, the ISO image generated is a whopping 7.6 GB, same size as the full Leopard DVD. I then tried to take that back into the Mac OS side, but it was "unmountable". Toast 8 was able to make an image of the full DVD that (I'd presume, as did previous versions of Toast) would contain both partitions of an ISO-9660 volume, but when I mounted that disk image with Toast 8, I didn't get the two-mounted-volume like I'd normally expect to see.
    I'd really like to know how to backup this volume - I demo this system regularly on my MacBook for clients, and I don't want to have to keep using my nice, pristine Leopard DVD when I have to do my weekly re-install. Any thoughts on how to get a simple extraction of the actual volume used for the Boot Camp drivers?
    Thanks much for the time,
    MBJ

    Hi Stefan,
    Thanks for taking the time to reply to my question! Although I think your steps will "work", per se (and I will try them out as soon as I can), I'm something of a purist in regards to my backups and so this method seems a little hackish as opposed to a process that actually images the volume in question (I'm also curious from a technical perspective, as the Boot Camp Assistant Beta used to allow for a dedicated MacintoshDrivers disc to be burned from it—I liked that method better, to be honest).
    Thanks again! I'll keep checking back here for other comments, and will let you know how the method you suggested works out.
    Best wishes,
    MBJ

  • Repartition a Boot Camp Windows partition

    I am trying to restore an Acronis 10 image backup on a Boot Camp Win partition. Acronis does not see the Win partition. I tried Partition Manager 8 to repartition inside the Win partition but PM says it cannot see the drive letters, though its small tools software seem to be ok with that. Has anyone tried to restore an image of another drive on a Boot Camp Win partition ?
    Thanks !
    Andrei

    You may want to post your question in the Boot Camp forums:
    http://discussions.apple.com/category.jspa?categoryID=237

  • Does Boot Camp Assistant Partition It in GUID or MBR?

    Hi. Does Boot Camp Assistant partition using GUID or MBR? Does it initially format it with FAT32, leave it blank or format it with NTFS for the Windows installer to be able to detect it? How's the Windows installer able to see the Boot Camp partition made by the Assistant? Thank you in advance. Gbu.

    Microsoft recommends GPT for 2TB and larger volumes.
    MBR can't boot from a volume larger than 1.9TB.
    Windows 7 can see GPT just find, but not HFS+, and AppleHFS and MNT are buggy.
    Disk Utility can create a drive that uses MBR.
    GPT has support for sub-tables and for Master Boot Record.
    Apple's implementation of MBR might be on the weak side.
    Windows 7 wants to actually have and boot from the 100MB system partition.
    Apple, Intel, Microsoft, Sun etc are members of EFI Group and Unified EFI is supported on Windows Vista SP1 64-bit and later 64-bit versions, but Apple's is more proprietary and differs, but is the sole reason really for Apple's excluding and including which Macs are "supported" (which really isn't true) running Windows 64-bit (Vista/7) - that they have to have EFI64 or UEFI 2.x.
    The external drive is likely something else, as you could format a drive to GPT and NTFS and have it work fine.
    The best way to 'clean' a drive of all partition tables and volumes is with Windows and something like WD Lifeguard or similar tool.
    As for hybrid, while some Macs can now boot by default to 64-bit kernel mode, I prefer the "from the ground up" of Windows 7 64-bit which still supports and runs 32-bit apps, but of course mandates 64-bit drivers in places.
    Your Apple disks not only have GPT, but have to have other partitions like EFI (128MB) after any HFS partition. GPT does have an MBR - see the Apple tech note #2166.
    Windows and GPT FAQ
    http://www.microsoft.com/whdc/device/storage/GPT_FAQ.mspx
    *Secrets of GPT* http://developer.apple.com/library/mac/#technotes/tn2006/tn2166.html
    Table 1: GPT Summary
    Block Description
    0 Protective MBR
    1 Partition Table Header (primary)
    2 through 2+b-1 Partition Entry Array (primary)
    2+b through n-2-b partition data
    n-2-b+1 through n-2 Partition Entry Array (backup)
    n-1 Partition Table Header (backup)
    The protective MBR is an MBR that defines a single partition entry that covers the entire area of the disk used by GPT structures and partitions. It is designed to prevent GPT-unaware programs from accidentally modifying a GPT disk. A GPT-unaware program sees the GPT disk as an MBR disk with a single, unknown partition. In a way, this is like the HFS wrapper around an HFS Plus disk.

  • Boot Camp wont Partition- Worried about reinstalling Leopard from backup

    Hello, I have been unable to create a partition through Boot Camp on my HD so that I can install Windows 7. I keep getting the error message: Cannot be partitioned because some of the files cannot be removed. I have ran Disk Utility and verified and repaired permissions, as well as verify and repair disk. I also ran disk utility via booting from the Leopard install disk. I have Onyx and ran all maintenance/cleaning options. So after researching it seems that the only solution is to backup with Time Machine, reinstall the OS and restore from the backup. If I do this, what is going to happen to all of my 3rd party applications/settings? Will the time machine backup save EVERYTHING and bring my MBP back to its identical state before the reinstallation, or will I have to reinstall all of my 3rd party applications (logic studio, Reason, Ableton Live, etc..)???
    Thanks for the help!

    Try iDefrag (www.coriolis-systems.com/iDefrag.php). I was having the same issue and before backing up and restoring I tried defragging the drive (first time ever). It comes with a utility to create a boot disk and after running its process I was able to create a new partition through Boot Camp.
    Back up your data first just in case anyway. I had no problems at all but you never know what might happen.
    Hope this helps.

  • Boot camp stuck partitioning

    I am having quite a panic attack here. I wanted to partition my 2tb hard drive in the second bay to have windows on it. I obviously did this using boot camp. I followed the steps as I had done it before and ended up partitioning 101gb for Windows. The progress bar went very quickly until about 1/3 of the way and just stopped. The animation is still there, but the bar itself it not moving at all. It has been almost 2 hours now and I am seriously considering cancelling the partition by just quitting boot camp. I have a few serious questions however:
    1) Am I being too hasty? Should a partition of this size take longer than this on a 2tb hard drive? If so then I will wait.
    2) If not, will quitting the Boot Camp application during the partition delete everything on my drive or will it just remove the 101gb that it was trying to partition?
    3) If it does just remove the 101gb, how would I go about getting this space back without erasing my whole drive? I have many files that I would like to keep.
    4) Also, if I leave Boot Camp running on this screen for a few days, will it damage the drive?
    That is was my screen looks like except the blue bar has an animation, the program is not completely frozen, it just is not progressing!
    I really need some help fast, thank you.

    Juts solved my own problem! If this happens to you, its so simple to filx.
    1) Quit boot camp, nothing will happen. You will lose that space temporarily though.
    2) Open Disk Utility
    3) Select your desired drive and on the first tab, click "Repair Disk". It should take about 30 seconds and all my space is back! No files were deleted and everything is back to normal.

  • Is it possible to use Boot Camp to partition an external hard drive so there is a OSX partition and a Windows partiton?  I want to use the external drive for backup only, NOT to load Windows and NOT to use as a boot drive.

    I have partitioned the internal hard drive and am running Lion and Win7 Pro on my iMac i5 2.7GHz with 16GB RAM.  Can I use Boot Camp to create a Windows partition on an OSX external hard drive to use for backing up both systems to the same HDD?  I do NOT want to install OSX Lion or Windows 7 Professional on the external drive.  I do NOT want to boot either system from the external drive.  The 3TB external drive is for backup only.

    Use NTFS for Windows and buy Paragon NTFS for OS X
    You can also try Paragon HFS for Windows
    As long as you are using for data and backups, you can leave the drive as GPT too.
    I would recommend strongly to always have a 2nd bootable Mac OS drive, only need 30GB partition. System maintenance. Though LIon Recovery Mode finally makes it less but not totally unneeded.
    And yes you can use Windows to create a partition.
    Boot Camp is too broad. Do you want or mean BC Assistant? not needed but probably possible.
    MBR has trouble with 3TB drives.

  • Copying Boot Camp Vista partition to new hard drive

    This is OS X Lion using Boot Camp version 4.0.4 with Vista on a separate hard drive. I want to move it from an 80Gb drive to a 1Tb. Looking for the quick and cheap way of copying the bootcamp partition to the new drive because it's the same Mac Pro so only the drive size will be different. Google searches has me using two software to copy the Apple bootcamp and Winclone to copy Vista.
    Isn't there a simpler way without purchasing software I will only use once? I'd rather just reinstall Vista and the other software manually than pay anything over $20 to do it.
    Any advice is appreciated.

    My apologies. I didn't make myself clear. I followed the proper procedure and got the error message. I tried the other formatting to see if it would help. All the same results.
    I found a possible solution on another Apple thread. I am going to move the drive to have Vista installed moved to the first stall on my Mac Pro 1.1. It is claimed that this will bypass the issue of GP if do that. Then after installation I can switch them back.
    I will post the results. I had no issue the first two times I did this since using Bootcamp when I first got this Mac Pro over 7 years ago.

  • If I erase and install will it remove my Boot Camp XP partition to?

    Hi I got a new iMac at Xmas, 1st one ever, Im loving it!
    Ive been messing about installing stuff, settings etc, I have set up my Boot Camp partition with X on and its working great. I havent run Time Machine yet as I knew I was going to be "testing" OS X out.
    So what I really think I should do is wipe it all clean, get the OS X updates (v10.5.2 etc) and then do a backup and start afresh.But what will happen to my Boot Camp partition? will this get erased as well?
    If so there is a free app called WinCLone that I could back it up with 1st I suppose, but am unsure if this works well?
    So can someone help please? the only thing I need to backup ff OS X 1st is my iTunes music, as I finally have beenorganising it all with art, tags etc. this will just go onto a USB external HDD i have
    cheers

    I saw you said 32GB for your Boot Camp partition, I presume you formatted in FAT32. If this is the case, Winclone _will not_ work. It only works with NTFS partitions. I have used it before to resize my boot camp partition.
    On a side note for anyone whom is trying to resize or change their file system on their BootCamp partition, your FAT32 partition can be converted to NTFS directly from Windows. This will allow the usage of Winclone (http://www.twocanoes.com/winclone/).
    +1. Click Start, point to *All Programs*, point to Accessories, and then click *Command Prompt*.+
    +2. At the command prompt, type the following, where drive letter is the drive that you want to convert:+
    +*convert drive letter: /fs:ntfs*+
    +For example, type the following command to convert drive E to NTFS:+
    +*convert e: /fs:ntfs*+
    +Note If the operating system is on the drive that you are converting, you will be prompted to schedule the task when you restart the computer because the conversion cannot be completed while the operating system is running. When you are prompted, click YES+
    You can now use Winclone to make an image of the existing partition. Then use BootCamp to delete the existing partition and create a new larger partition.

  • Boot Camp/Windows Partition

    I'm thinking of going the boot camp route so as to run a few of my windows programs and would be grateful for advice from users who have done this. Boot camp assistant seems to say 32Gb as standard for the win partition - has this been found to be reasonable? also it advises to check for firmware updates - could only find one (V 1.1) posted Nov 2006. Presumably Leopard won't need this update? System spec = iMac 2.33Ghz Intel Core 2 Duo - 2Gb 667 DDR2 SDRAM - ATI
    Radeon X1600 256Mb VRAM - 250Gb Serial ATA hard drive running OS X Leopard.

    You may want to post your question in the Boot Camp forums:
    http://discussions.apple.com/category.jspa?categoryID=237

  • Boot camp and partitions

    Hello all,
    I am a bit new with boot camp and I am not sure about the size of patition.
    What do you suggest me for OS X and Windows partition size?
    Thank for advices

    ok, thanks for your advice.
    I would like to ask you something else. I just inmstall my first boot camp with Windiws 7 and it works fine. I also install boot cam driver, and all seams to be fine.
    I also discover that when I reboot from Seven, it start Seven. And when form Windows Seven I got to Control Panel -> Boot camp and I restart on OS X.
    And from OS X I restart my laptop, it starts OS X.
    So If I retart my system, it will restat to the OS it has been restart from.
    My question, when I Start my workstation, how can I do that from one piont it let me choose to which OS I want to start. (Excepted from olding the "option bottom"?

  • How to hide (make invisible) folders in Boot camp windows partition

    I just bought my parents a mac mini core duo and set up boot camp on it. I used FAT32 so the windows partition shows up in OSX as a volume called "NO NAME". I can also see all of the files and system directories in the volume as one would expect. I have 2 questions.
    1. can I rename the "NO NAME" partition from within osx to something more like "WINDOWS" or "XP"? or am I stuck with "NO NAME"?
    2. How Can I hide all of the system files and directories? I don't want other people in the house to be able to see anything on that partition except for 1 directory called "DropBox" (or something like that). This will protect the windows partition from being tampered with, and any files that need to be moved across partitions can just be placed in the "DropBox" folder.
    I would appreciate any help with this.
    thanks,

    Do you have the "Developer" folder on the main level of your hard drive? If not, you can manually install the Developer Tools from the install disk(s) that came with your iBook.
    I would be more than just a little worried about using the Terminal and command line codes to start hiding files & folders on your Mac if you're not already familiar with those tools.
    -Doug

  • Uninstalling Windows via Boot Camp, still partitioning after roughly 1 hour

    Hi,
    This is my first post, but I'm a long time searcher. I usually find what I'm looking for, but in this case I thought best to ask. I hope I follow the correct etiquette!
    So today I thought I would have a go at installing Windows XP via Boot Camp on my MacBook Pro. To cut a long story short, I completely messed it up because I (stupidly) read SP1 instead of SP2 on the CD and essentially it didn't install anything from the boot CD's -- as you would expect.
    So after a quick panic I got back running in OS, and have now just tried to uninstall windows using Boot Camp, following the correct instructions, and after around an hour now it's status is still reading: Partitioning disk.....
    Is this to be expected, or is this wrong? Initially I only partitioned 32Gb for Windows as I didn't really want to do anything with it.
    I have done a few searches and got some mixed answers - ranging from it should be instantaneous, to it could take an hour.
    What should I do next?
    Thanks in advance.

    Well......First, I should say that although I've used Macs for many years I'm not an expert by any means. So, take my advice with caution.
    In some ways it seems like, without a full backup, you are sort of between a rock and a hard place =-( I'm not sure what will happen if you force quit the Boot Camp repartitioning. It might be o.k. and it might bugger up your hard drive and require you to reinstall everything. I'm not sure what effect "ejecting" the Windows partition would have.
    I guess at some point you're just going to have to do something. When I get to a point where I am in a situation like you are I search the Internet for as much information as I can get. If I can't find a specific answer to my problem at least I usually get some idea of what to try. Then I just go ahead and start trying things. When you get into that situation it is much less stressful if you have a complete backup. (It's really worth spending the money to buy an external hard drive and start using Time Machine to make a backup.)
    I know that my answer is not much help. Sorry about that. Maybe someone else will chime in with some more useful information. If they don't I guess that you're just going to have to take a plunge =-(

  • How to migrate Boot Camp Vista Partition to new Mac

    Hi there,
    I've been working with Vista on my iMac 24" (Core2Duo 2,8GHz 2007) using a Boot Camp partition. I'll be migrating to a 27" Quad-Core iMac soon. Does anybody out there know if there's a smooth and simple way to also migrate the Boot Camp Partition without new installing Vista OS and Windows Apps?
    SL 10.6.2 on old and new iMacs. Any info appreciated.

    I figured graphics drivers would be an obstacle...just talked to a friend and got some advice:
    1. When display stays black after installation of Windows 7 64 bit (signal is on Mini-Display port)
    restart from Windows 7 DVD - open command prompt (shift+F10) and delete all ATI Drivers.
    2. Restart Windows 7 with default graphics drivers. Download ATI Desktop drivers, modify using ATI MobilityModder, install modified drivers.
    It works.
    Use of Magic Mouse's multi-touch features in Windows requires Apple's Bluetooth update 1.0 for Windows.

  • Boot Camp Vista-Partition lost in Mac-Partition

    Hi everyone,
    yesterday i reinstalled my leopard due to some issues. After this act i recovert my data using my Time Machine backup device.
    Everything went well so far except one little nasty thing: the icon of my Vista-Partition (created with Boot Camp) was lost. And thats my problem. I can't see my Vista-Partition when i'm in Leopard. Even the Finder doesn't show me the partition.
    The funny thing is, that i can boot into Vista without any problems using the Bootloader. When i'm using Vista, i still have access to the mac-partition. Nothing changed here after the reinstallation.
    Would be nice, if anyone could help me bringing back the Vista-Access into my Leopard.

    I figured graphics drivers would be an obstacle...just talked to a friend and got some advice:
    1. When display stays black after installation of Windows 7 64 bit (signal is on Mini-Display port)
    restart from Windows 7 DVD - open command prompt (shift+F10) and delete all ATI Drivers.
    2. Restart Windows 7 with default graphics drivers. Download ATI Desktop drivers, modify using ATI MobilityModder, install modified drivers.
    It works.
    Use of Magic Mouse's multi-touch features in Windows requires Apple's Bluetooth update 1.0 for Windows.

Maybe you are looking for