Repair permissions - always the same ones need repairing (Shockwave)

Each time I do a Repair Permissions after doing an installation (in this case Security 008 update for Intel on my MBP) the same permissions always are repaired and ONLY these. Here's the report I always get:
Permissions differ on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences, should be -rwxrwxr-x , they are -rw-rw-r--
Owner and group corrected on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences
Permissions corrected on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences
Does this seem logical? correct?
I know they are repaired since when I go to do the next installation and begin by Repairing Permissions, nothing needs repairing. Yet I know that after another installation the Shockwave permission differences will rear their heads again.
I do know tht Shockwave is an Adobe thing and I believe it is needed for Quicktime. Could there be something wrong with my Shockwave - or is this typical of Adobe products?
Thanks,
Mrs H

Mrs H wrote:
Each time I do a Repair Permissions after doing an installation (in this case Security 008 update for Intel on my MBP) the same permissions always are repaired and ONLY these. Here's the report I always get:
Permissions differ on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences, should be -rwxrwxr-x , they are -rw-rw-r--
Owner and group corrected on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences
Permissions corrected on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences
Does this seem logical? correct?
I know they are repaired since when I go to do the next installation and begin by Repairing Permissions, nothing needs repairing. Yet I know that after another installation the Shockwave permission differences will rear their heads again.
I do know tht Shockwave is an Adobe thing and I believe it is needed for Quicktime. Could there be something wrong with my Shockwave - or is this typical of Adobe products?
Thanks,
Mrs H
So, I have now updated the Security Update 008 on the G4 and guess what, the same Shockwave Repair permission issue. It DID NOT appear when I repaired permissions before and after the other updates (Java, QuickTime, Migration DVDCD..., etc) But Shockwave repairs did appear after Security 008.
I found this link to another thread here on Security 008 and Shockwave. http://discussions.apple.com/thread.jspa?messageID=8699716&#8699716
...but, I don't know if this is my problem.
In any case, I just have to update iTunes (only on G4) and Safari (on all my Macs) and then I'm good to go - or at least good to go and figure out what is wrong with Shockwave!
Oh one more update to do - a casual remark I made in reply to another poster has led me to learn that I can update my Appleworks 6 and get it to work in X. Hurrah!
Mrs H

Similar Messages

Repair Permissions: Always the same problem

Every time I run Disk Utility, I get the same 3 problems! Is this normal? Why can't Disk Utility repair this?
Verify permissions for “Macintosh HD”
Determining correct file permissions.
Permissions differ on ./Applications/iTunes.app/Contents/Frameworks/InternetUtilities.bundle/Contents /MacOS/InternetUtilities, should be -rw-rw-r-- , they are -rwxrwxr-x
Permissions differ on ./Library/Application Support/Macromedia/Shockwave 10/Shockwave 10 Preferences, should be -rwxrwxr-x , they are -rw-rw-r--
Permissions differ on ./usr/libexec/dumpemacs, should be -r-xr-xr-x , they are -r-sr-xr-x
Permissions verification complete
The privileges have been verified or repaired on the selected volume

Restart your computer after repairing permissions.
If you are still getting those errors after restarting, then I suggest that you boot from your System Install DVD. From the Utility Menu run the repair disk/permissions option.
Repairing permissions from the Tiger/Leopard DVD
Boot up from your Tiger or Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
If Disk First aid is able to complete the repair now click on the "Repair permissions" button.
Once this process has been completed restart your computer.

Have 3 sites on line and need to update them but each time i click on the site icon it opens always the same one... and i cannot access the other 2....

Have 3 sites on line and need to update them but each time i click on the site icon it opens always the same one... and i cannot access the other 2....

In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
You can download an already compiled version with this link: iWeb Switch Domain.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

When i try to send a photo with i photo the program sends always the same one, what can i do?

When i try to send a photo by iphoto share, the programm always sends the same one. Why? What can i do?

What version of iPhoto?
For iPhoto '11 IMHO the best solution is to set Mail as your email client in the iPhoto preferences
LN

TableModelEvent is always the same - one cell or entire table changed

Why does JUTableModel fire always the same event, if you change a single cell, or entire table structure changes.
Event always looks like this:
first row: 0
last row: 2147483647
type: 0
column: -1
source class: oracle.jbo.uicli.jui.JUTableBinding$JUTableModel
I need to distinguish between a single cell change and entire table structure change.

Thanks for getting back at this.
Unfortunately I get a 0, when I try to reproduce your solution. Of course, I am using the German version, but it should be the right formula.
When I leave out the $-signs in the search array I get a 0. See second picture.
Am I doing it wrong?
Lukas

I lose half my saved usernames everytime Firefox closes and they are always the same ones!

The saved usernames that disappear are all of the "https" type.
Firefox is not even asking me if I want to save the username and password.

Do you mean names and passwords in the Password Manager or do you mean that you are no longer logged on to (remembered by) websites after closing and restarting Firefox?<br />
If the latter happens then you have a problem with cookies that are not kept or the file that stores the cookies is corrupted.
* Websites remembering you and automatically log you in is stored in a cookie.
* You need an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep that cookie, especially for secure websites and if you let cookies expire when Firefox closes
* Make sure that you do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
* http://kb.mozillazine.org/Websites_report_cookies_are_disabled
* http://kb.mozillazine.org/Password_Manager

Repair permissions always via install dvd?

Seems that always when I repair permissions (I do it once a week and with every major install) there are the same permissions that are "wrong" every time. And the list seems to get longer.
I always repair just by starting Disk Utility and repairing - without booting from the install dvd. Is that wrong? Should I really do the repair permissions always from the dvd? (Like the app seems to suggest.)
Is there any use doing the task just from the active system or is it really useless?
Please tell me the "most pro way of cleaning up my system".
And as former PC Windows user - why is there no "Find disk errors" type of app? Does Repair Permissions repair disk errors as well?
Thanks for advice!

Hello-
I don't claim to be a 'tech expert' but my understandings seem to work for me. If I'm wrong, I'd be just as interested in other opinions as yourself, so FWIW;
Seems that always when I repair permissions (I do it
once a week and with every major install) there are
the same permissions that are "wrong" every time. And
the list seems to get longer.
The list you see doesn't mean that anything was wrong, just set to something other than what the original permissions called for. If there is a problem you will usually get a red listing indicating a failure of some sort. Although the value of arbitrarily repairing once a week if no OS/app installs or upgrades is questioned by many, the consenus opinion seems to be "it can't hurt".
I always repair just by starting Disk Utility and
repairing - without booting from the install dvd. Is
that wrong? Should I really do the repair permissions
always from the dvd? (Like the app seems to
suggest.)
As I understand it, you are doing the right thing. Some rather knowledgeable folks actually say this is the 'better' way because your version of the OS has most likely been updated to something newer than what's on the Install CD. IOW, you should Repair Disk Permissions based on the same OS version you are repairing.
Please tell me the "most pro way of cleaning up my
system".
There really isn't that much that needs to be done other than following the suggested 'proactive' approach pertaining to perm. repair, standard cache maintenance (if you run your system 24/7 it's automatic, or you can run the routines manually if your comfortable with Terminal. Otherwise, a utility like OnyX -free- is readily available.)
As long as you aren't constantly downloading, installing & removing every piece of junk you can get your mouse on you should be OK.
And as former PC Windows user - why is there no "Find
disk errors" type of app? Does Repair Permissions
repair disk errors as well?
Repair Perms doesn't, but the OS does a much better job than Windows, which needs such a utility because it creates the errors in the first place. Disk Utility does include a Repair Disk function which requires starting up from a different boot disk, but it doesn't need to be used as a matter of 'routine' maintenance.
In the event you do run into problems, these Discussions are one of the most invaluable resources available to you. Don't hesitate to ask & you'll get some excellent advice & guidance on any situation you may encounter. Just wait for considered responses before taking any response at face value.
Regards |:>)

Repair permissions Error: The underlying task reported failure on exit, ever since time machine system restore

Recently had to restore system 10.5.8 Leopard startup volume using Time machine. After many hours of migrating additional important databases that were recovered from failing startup drive, everything seemed to be back up and running smoothly on a new WD 1tb Black drive. Right before I run timemachine again to backup the new revised seemingly stable startup volume, I choose to repair disk permissions using disk utility. Repair permissions failed with this error, The underlying task reported faliure on exit. I tried using the OS X DVD to repair permissions, Diskwarrior, Onyx, none are able to reapair the disk permissions. Although everything seems perfect I would imagine that the system will fail eventually. It's strange that I had no problems repairing disk permissions in the past on this particular system that was the most recent backup. What should I do ?

Repair permissions always reports a bunch of stuff. Ignore it if it says it completed successfully.
Also note that is it usually a waste of time (except maybe after a system upgrade).

HT204053 I need to change my i cloud e-mail address to the same one I set up when I purchased my apple account I just created an I cloud address and when Ijust read the set up for I cloud it says I should use the same e-mail address that I started with H

I did not know that when I created a e-mail address that I was suppose to use the same one that I created when I first signed up with Apple I phone. I want to change my e-mail address to the one I first had How can I change it? I do not need two e-mail accounts It should have read that when you are setting up an e-mail address use the one that you first signed up with. Not after you go through all the set ups for I cloud it tells you at the end to use your account that you first started with. Can you please help me I am new at this and I still can not set up on my computer with my phone to I cloud so if I had my phone stollen I can find it I also have and I pad to set up yet It is 3 days and I still can not set it up
Thank You and Hoplefully I can change my e-mail address so I can have everything on one account

If you selected open a new Apple ID account, go back a step and enter use existing Apple ID.
You will have to set up a separate iCloud account or your iPads will mirror each other.

Our granddaughter has a ipod. She's getting a iphone and a mini idpad. what is the best way to set them up. Does she need a new apple id and password or would she use the same one she has for her ipod

our granddaughter has a ipod. She's getting a iphone and a mini idpad. what is the best way to set them up. Does she need a new apple id and password or would she use the same one she has for her ipod

Just use the same one on all devices.

Do I need to buy a new printer, dedicated for my Mac or can I use the same one we use for our PCs?

Do I need to buy a new printer, dedicated for my Mac or can I use the same one we use for our PCs?

Hello stacksofamber and welcome to Apple Support Communities,
You should be able to find a Mac OSX driver for that printer. Did you check with the manufacturer/'s website?

II can't reset my APPLEID password because it doesn't recognize my APPLEID!!! I have always had the same one!

I can't reset my APPLEID password because it doesn't recognize my APPLEID!!! I have always had the same one!

Your Apple ID
    1. Forgot Apple ID
    2. Apple ID - Apple Support
    3. Manage your Apple ID primary, rescue, alternate, and notification email addresses - Apple Support

HI ALL SINCE TWO DAYS I AM DOWNLOADING VIBER BUT I AM NOT HAVING MY ACCESS CODE AND EVERY TIME I DELETE THE APPLICATION AND DOWNLOADING IT AGAIN BUT ALWAYS THE SAME RESULT PLEASE I NEED YOUR HELP FOR THE ACCESS CODE.MY PHONE NUMBER IS 0022996969896.THANKS

HI ALL SINCE TWO DAYS I AM DOWNLOADING VIBER BUT I AM NOT HAVING MY ACCESS CODE AND EVERY TIME I DELETE THE APPLICATION AND DOWNLOADING IT AGAIN BUT ALWAYS THE SAME RESULT PLEASE I NEED YOUR HELP FOR THE ACCESS CODE.MY PHONE NUMBER IS 0022996969896.THANKS IN ADVANCE

try this website this should help you http://helpme.viber.com/index.php?/Knowledgebase/List/Index/1/iphone

Do you have to 'Repair Permissions', on the ipad?

Do you have to 'Repair Permissions', on the ipad?
and… if YES - how do you do it?
if NO - why not?
Thank you.

There is no such option for the iPad as there is for a computer because the iPad uses a stripped-down version of Mac OS X.
(69160)

Good afternoon, I would like some information I have an ipod nano 6th generation and has the same one-year warranty is only 2 months of use, and it fell down and broke the glass of the display, I called technical assistance in Brazil and informed me that

Good afternoon, I would like some information I have an ipod nano 6th generation and has the same one-year warranty is only 2 months of use, and it fell down and broke the glass of the display, I called technical assistance in Brazil and informed me that Brazil has no repair services for Apple, which was the basis of its price change in the exchange is not worth half the value of the product.
I wonder how I do to change this device without the expense of 50% for the same product is in warranty?
Thanks in advance.

yes agree, plus a multinational seeing a product and has no technical assistance to do the maintenance then it's no use I buy a new product if it is damaged I will always be because it has no prejudice in this maintenance.
sorry but even more products coming from China to Brazil in technical assistance.

Repair permissions - always the same ones need repairing (Shockwave)

Similar Messages

Maybe you are looking for