Repair Permissions: Slow or Not Working?

Is the Repair Permissions function in Leopard NOT working, or just incredibly slow (and progress not showing properly)? Some would report that it IS working, but takes a long time, sometimes even a few hours. Any experiences?

"I'm having trouble with Parallels".
My new MBPC2D with OSX.5 worked fine, until I ran Parallel with Bootcamp partition. OSX.5 won't start anymore, since it is in an indefinite start up loop, before ever getting to a blue screen. Starting on XP works fine, as does an OSX.5 back-up on a FW disk.
So I did a complete re-install. As before everything worked fine until Parallels and Bootcamp. Same miserable result. What to do? Permissions repair does not complete while running the book hot.
I bought the new book for running OSX and XP at reasonable speed in the first place!

Similar Messages

1415 fnw printer wireless connection extremely slow or not working with OS X, works with windows

The wireless connection to the printer is either extremely slow or not working at all on OS X Yosemite. It shows up in the list of printers in Bonjour in Safari, and I can connect to parts of the web interface if I wait a very long time. However, I cannot add the printer as a new printer in System Preferences even though the printer shows up.
I have upgraded to the latest firmware. The WiFi indicator on the printer is on, "green", and it has a reserved IP showing up in my router (ComCast). It seems that Windows machines can printer to the printer wirelessly without a problem.
Any help appreciated.
Stephen
This question was solved.
View Solution.

Hello @sscotti,
I would like to assist you today with installing your wireless HP LaserJet Pro CM1415fnw Color Multifunction Printer on your Mac OS X 10.10 Computer. Now you indicate in your post that this printer works fine with Windows computers, and you are able to 'see' the Bonjour printer on your Mac. Therefore, the issue that you are experiencing is not network related. Rather, I do believe that you are experiencing a driver conflict on your Mac OS X 10.10 computer. Can I please have you run the steps below to resolve this issue.
Step 1: Uninstall Drivers and Software:
First, I'm going to have you 'clean up' your Mac OS X 10.10 computer to verify that any trace of your Laserjet printer is gone so we have a nice clean slate to work with. Please click here and when the website opens select the drop down for 'Mac OS X v10.6, OS X v10.7, OS X v10.8, and OS X v10.9' as the steps are the same for Mac OS X 10.10. Run the appropriate uninstall steps for the method in which you originally tried to install your printer: Apple Updates, or the HP Driver download.
Once the uninstall is complete, please proceed to the next step.
Step 2: Verify and Repair your Disk Permissions on the Mac:
Open Macintosh HD and go to Applications
Go to the Utilities Folder
Open the Disk Utility
Select the Hard Drive volume you are using (usually on the left)
Select Verify Disk Permissions
Once that process is done, select Repair Disk Permissions
Step 3: Check for Apple Updates:
Go to Apple
Select System Preferences
Select Software Update
Click Update Now
Install your available updates
Restart your computer
Step 4: Reinstall your Software and Drivers:
Please click here to download the appropriate Mac OS X 10.10 drivers for your HP Laserjet printer.
Once the website opens select the 'download' button on the top left
Once the download has completed, please follow the onscreen steps to reinstall your printer.
Once the reinstall is complete, test the print and scan functions to ensure that your printer is functioning as per normal.
Please respond to this post with the result of your troubleshooting. Should you still be experiencing issues there are additional steps I can have you run through. I look forward to hearing from you. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

I am using laptop hitting and slow system not working

i am using laptop hitting and slow system not working and very late opan file browser every think . plez help me

Hi,
Shut down the notebook. Tap away at the esc key as you start the notebook to enter the Start-up Menu. Select the Bios option ( usually f10 ) and under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory. Post back with the details of any error messages.
Note: If the option to run these tests is not available in the Bios Menu, use the f2 diagnostic menu instead.
Can you also post back with the following details.
1. The full Model No. and Product No. of your notebook - see Here for a guide on locating this information.
2. The full version of the operating system you are using ( ie Windows 7 64bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

My macbook is back from repairs. It is not working with my apple led cinema display. It was working prior to the repairs on the laptop. Is there a setting I don't know about that might have been changed?

My macbook pro is just back from repairs. It is not working with my apple led cinema display. I have followed the directions in the cinema display manual. am I missing something?

Take a look at the Displays preference panel to see if everything is ok, particularly the resolution and refresh rate. Displays will probably try to put the panel for the ACD on the ACD where you won't see it. So click "Gather Windows" to get the ACD panel on to your macbook.
One more thing, make sure you fully seated the mini displayport plug. They can be sneaky little devils in that they need to be fully pushed in.

ITunes download is extremely slow or not working, am I the only one experiencing this, iTunes download is extremely slow or not working, am I the only one experiencing this

iTunes download is extremely slow or not working, am I the only one experiencing this, iTunes download is extremely slow or not working, am I the only one experiencing this?

I do not have a solution, just the same complaint. ***! ! I just used the iTunes store 2 weeks ago and now, after reviewing everything they asked for including ID/Pass/ Account Info etc. I can't even get into the store. I have tried asking at the Mac store and it has all been to no avail. I was perfectly happy with iTunes before all of this ********... seriously what is the issue with iTunes? They ask me to upload a new version (with no system specs anywhere that I can find on the page) and then say it can't utilized because of system inadequacy. It is exceedingly frustrating.

Repair permissions slow

Trying to rebuild permissions with Snow Leopard on 2Ghz Intel Core2 duo Imac. Starts off with an estimated time of 28 minutes, but never progresses. Am booting from Snow Leopard master install disc. Is the process that slow? It hasn't been that slow with previous OS.

There's no need to boot from the installer unless you wish to repair the drive. I would advise this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If it's slow then it may be because there are problems. Leave it be until it finishes or throws an error message.

Repairing permissions (Error msg. not understood)

Good evening,
So far my erase all/install of Leopard has gone smoothly on my 2Ghz Duo macbook, however I recently went in to Disk Utility to repair permissions and this popped up after it completed. (As a side note, repairing the permissions didn't take nearly as long on Tiger, not did it cause the fan to go into overdrive?)
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
What does this mean, and is it a a possible problem? I don't understand.
Thanks in advance

There are a couple of other threads about this already. Search discussions using these words: Permissions Warning
You'll see a bunch of threads about the same thing.
Basically, I think I remember something being mentioned about Apple Script. Incidentally, I had the same problem.

Command "service-policy input policy-name permit-any" will not work

Hi all,
have a SG500 with latest Firmware, but this command will not work.
service-policy input QoS_01 permit-any
i get this error message:
% Wrong number of parameters or invalid range, size or characters entered
without the option "permit-any or deny-any" the command is successfully.
What is the reason?
It is important, directly to specify this options. Otherwise to lose the access to the switch.
Regards
Stefan

Hi Tom,
i have a ACL / ACE and create a QoS "policy table" put the "policy class map" (with class mappings) in it.
And now i will bind this QoS policy to a Ethernet port.
cli tutorial example say:
Use the service-policy Interface Configuration (Ethernet, Port-channel) mode command to bind a policy map to a port/port-channel. Use the no form of this command to detach a policy map from an interface.
This command is only available in QoS advanced mode.
Syntax
service-policy input policy-map-name default-action [permit-any | deny-any]
no service-policy input
Example:
witchxxxxxx(config-if)# service-policy input policy1 permit-any
A cisco support open a ticket for me.
-Stefan

Verifying and repairing in Snow Leopard not working

Hi everyone.
I have a white MacBook (3,1) running Snow Leopard, Mac OS X 10.6.8. My computer was running extremely slowly so I opened the Disk Utility to try to repair it. Disk Utility told me I needed to run my Snow Leopard installation disk and verify disk permissions from there. I did so, and even though the estimated time said 27 minutes, it ran overnight, generated a long list of broken permissions, and nothing else happened. I rebooted and now I could select "Repair Disk Permissions", so I did so, and again, the estimated time was 25 minutes but nothing happened.
From browsing the support community I see that this is a known issue with Snow Leopard. What can I do to verify and repair permissions so I can then verify and repair my disk? I would appreciate any information whatsoever.
Thanks,
Christine

Try it this way:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Repair Permissions - "Info does not esist"

Just curious - Whenever I run Repair Permissions, the first line of the resulting log says "parent directory ./Users/Shared/SC Info does not exist". What is this telling me? The computer seems to be running just fine, and no other problem areas show up on the log. Thanks for the help.
iBook G4 Mac OS X (10.4.4)

Hi, R.G.
Well, this could lead to long and tedious UNIX tutorial. The bottom line is that you need not be concerned about this message when you run Repair Permissions from Terminal.
The info you posted is a directory listing. It basically says that the Users > Shared > SC Info folder (directory in UNIX parlance) contains a file called SC Info.sdb. The data from the ls command you issued provides details about the ownership, permissions, size, etc of that folder (line ending in "."), its enclosing folder (line ending in ".." — the Shared folder), and the file(s) contained in the SC Info folder (line ending in "SC Info.sidb").
The data in the first four columns is explained in Figure 2 of "Troubleshooting permissions issues in Mac OS X", though one also needs to read the earlier part of that document to understand what columns 1, 3, and 4 are about.
The rest of the columns are explained in the section entitled "The Long Format" of man (UNIX manual) page for the ls (list directory contents) command.
If you open the Macintosh HD > Users > Shared folder in Finder, you won't see SC Info folder because the "Invisible" file system attribute for that folder has been enabled in order to hide it.
If I execute the same ls command I provided to you earlier (ls -al /Users/Shared/SC\ Info/), I see:<pre>total 0
drwxrwxrwx 3 drsmoke wheel 102 May 26 2004 .
drwxrwxrwt 31 root wheel 1054 Mar 17 05:56 ..
-rw-rw-rw- 1 drsmoke wheel 0 May 26 2004 SC Info.sidb</pre>The zero (0) highlighted in red in my output indicates the file SC Info.sidb is zero bytes in size. This is because no content (songs, etc.) has been purchased from the iTMS on this computer. That file on your Mac has a non-zero size since you've purchased songs or other content from iTMS.
None of the Apple Developer documents address the specific purpose of the SC Info.sidb. In investigating this file, and comparing it with the same file on some other Macs, it was found that this file's size is non-zero if one has purchased content from iTMS and a little more digging led to the understanding that this contains descriptor keys, perhaps related to authorizing a Mac to play purchased music.
If you really want to get into the UNIX command line, check out the UNIX-related books I recommend in my "Learning About Mac OS X" FAQ. Terminal is powerful and is especially useful in exploring the underpinnings of Mac OS X, accessing facilities that have yet to be exposed in the GUI (Graphical User Interface), as well as troubleshooting. One should study on it a bit since, if used incorrectly, certain Terminal commands can erase your hard drive or otherwise render one's system unusable.
I hope the info above explains this better.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

IMac- crashed in Safari then reboot is flaky (slow and not working) :(

Daughter was running Safari and screen locked up. Mouse would move but nothing else worked.
Couldn't call up force quite, menus not working, nothing.
Hold power button to shut it off. Waited a few minutes then powered back up.
Took a long time (+10 minutes) to get to login screen.
Didn't work right. Click a name and it would beachball. Sometimes, it would drop to the password but red dots pop up on screen and it locked up.
Disconneccted everything but keyboard.
Same, same, same.
Started in Single User and ran applejack auto restart.
Same thing.
Ran applejack AUTO restart.
Same thing.
Ran Apple Hardware test. Passed.
Reset PRAM and PMU/SMU.
If I let it go, it might make it to the login screen but no further. Most of the time it gets to the blue screen (after gray Apple) then beachballs.
Plugged in FW drive with 10.5.8 and hold option and the selection screen comes up real quick but after I select external (or internal or DVD), takes a long time to get there.
System DVD works but takes while to boot.
Internal or external take a long time then doesn't make it all the way.
If I hold Shift (safe boot), it takes a while (~5 minutes) but it does get thru and works okay.
External drive has not been updated for a few months so the OS on it
Disk utility on both drives is fine.
SMART status on internal is fine.
Disk Warrior is fine.
Apple Hardware test is fine.
Battery on motherboard? Nothing seems to have been reset.

4 bad capacitors!!!
And this was a replacement MB (bad USB port) installed by Apple ~June '08 ...
The MB serial number is just above the covered serial numbers in the G5 repair extension.
Doubt Apple will do anything for me at this point.
It works in safe boot.
Guess it's time for a new 'puter.
I'll get some capacitors and change them out, see if I can get it working correctly and use it for iTunes in the living room.
I wanted to change the heat sink compund (it always ran right at 160 degrees when doing anything) but was waiting from an excuse to take it apart.

Disk permissions and Internet not working

I am have problems with:
1. Disk utility - run repair permissions and then states "Permissions repair complete". Run verify permissions and some of the same problems come back saying they are now this. This is after running them over and over again and doing nothing else on computer.
2. Problems connecting to internet. Wiring setup has not changed. Can't connect to (Example: www.google.com) using Safari, Firefox or Chrome, but can access iTunes Store and App Store with no problems.
I can't figure out what to do, any suggestions would be great.
John

jodmcc1,
Ignore the permissions thing, this is normal, you can repair constantly and it will always come up with something, so do not be concerened with that.
Here are some things to read on connecting:
http://support.apple.com/kb/HT1714?viewlocale=en_US
http://support.apple.com/kb/PH6731
http://support.apple.com/kb/PH6731

Repairing permissions from disc -not

Just to put it out there I own 4 mac's currently and have been using them for 10 years and I'm pretty stumped right now. I updated to 10.4.5, decided to repair permissions from disc and I boot up (from a 10.4.x disc probably like 10.4.2 or 3) and I get a diagram of a mouse with an arrow pointing at it showing that it needs batteries! I've never seen this before and I don't use an external mouse so what the heck is this? I read that you're not supposed to use install discs to repair permissions after you upgrade beyond that version. Never heard that before but that's fine. I can't even boot up beyond this mouse diagram thing to repair the disc. Is it the PB or what? Beyond that if you aren't supposed to use a boot disc, how do you repair permissions? Using disc utility in "utilities" doesn't do everything. Maybe someone can straighten me out here.
I've upgraded to 10.4.4 on my dual 2.5 ghz and use the same tiger install disc and or update disc (I have both) and have no problem.
thanks in advance
powerbook 1.67 high rez 15" Mac OS X (10.4.5) 2 gigs ram

thanks for the reply, my understanding is that repairing from disc doesn't get everything, that you need to boot from a dvd or external disc.
any idea why my PB wont boot from either disc? what if I wanted to reinstall, I cant even do that!!
thanks

When I open a pdf in Acrobat pro 8.3 it immediately closes and the program does too. Repairing the installation did not work?

hen i

Hi Stephen,
What version of MS Office are you using?
Are you facing the issue similar to that mentioned here: Acrobat/Reader: Attach to Email button not working for PDFs referenced from long URLs
Open Acrobat. Use the click-path Edit - Preferences - select the Category "Email Accounts". In the dialog there is the "Add Account" drop-down. Select "Add Other". The "Add Webmail Account" dialog presents. You'll fill out the dialog's fields with Outlook.com settings. (don't forget the "Advance Settings" button)
From a look-see on the web it appears that the following are the needed settings. BUT, you'll be wanting to validate.
The Outlook.com SMTP server settings for sending outgoing messages from an email program on desktop, cell phone or mobile device are:
• Outlook.com SMTP server address: smtp.live.com
• Outlook.com SMTP user name: Your full Outlook.com email address (not an alias)
• Outlook.com SMTP password': Your Outlook.com password
• Outlook.com SMTP port: 587
• Outlook.com SMTP TLS/SSL encryption required: yes
For incoming messages from an Outlook.com account to an email program using POP, use the Windows Live Hotmail POP3 server settings.
The Outlook.com POP server settings for downloading new incoming messages to email program, cell phone or mobile device are:
• Outlook.com POP server address: pop3.live.com
• Outlook.com POP user name: Your full Outlook.com email address (not an alias)
• Outlook.com POP password: Your Outlook.com password
• Outlook.com POP port: 995
• Outlook.com POP TLS/SSL encryption required: yes
Regards,
Rave

Problem resetting user permissions- CMD R not working

Hi,
Thanks in advance to those willing to lend some help!
GEAR:
2.53 GZ Core 2 Duo Mini running 10.8.5 All updates done.
I believe I have a current Time Capusle backup at my disposal.
New Macbook Air available to help.
ISSUE:
In the last couple of days I seem to be losing permissions to do things in my user profile which is the admin. Can't dump anything to trash without a password, mail will not open as it doesn't have permission anymore, can't move files around from folder to folder, Excel won't save as it is now read only, Firefox won't open as it thinks there is already an open version...Messages won't sync properly anymore or access address book to bring up peoples names to match the phone numbers... etc..etc.
Research showed the problem is likely user permissions and the cure is resetting. Knowing this has to be done via terminal after a COMMAND R boot into recovery mode I have tried everything to make this happen. No go! Apparently the partition required to boot into recovery never happened during install as the computer insists it is not there. Worse it will not default to internet recovery either. When I hold OPTION and boot I have only the HD visible and no recovery option to choose from.
I have created a 10.8 USB recovery stick (on my mac air) and can boot to that on the mini but there is no terminal option (as far as I can see) to allow me to reset the permissions. I also tried to boot to an old Leopard CD hoping that might work.. nada.
I have done a verify disk and repair disk permissions. All good. The computer works 100% fast and proper if I login under a new user profile so my issue appears not to be hardware related at all.
Given that I can't CMD R into any recovery is there any other way to reset these permissions?
Anyone know what would cause this to happen?
Thanks!!
Dave.

In light of the fact there are other things Etre noted as issues I posted the lot. Sorry it's longer but thought I may lead you in the correct direction.
EtreCheck version: 1.9.13 (49)
Report generated 13 August, 2014 11:05:31 PM EDT
Hardware Information: ?
Mac mini (Late 2009) (Verified)
Mac mini - model: Macmini3,1
1 2.53 GHz Intel Core 2 Duo CPU: 2 cores
8 GB RAM
Video Information: ?
NVIDIA GeForce 9400 - VRAM: 256 MB
Acer H233H 1920 x 1080 @ 60 Hz
Acer H233H 1920 x 1080 @ 60 Hz
System Software: ?
OS X 10.8.5 (12F45) - Uptime: 0 days 1:45:51
Disk Information: ?
ST750LX003-1AC154 disk0 : (750.16 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted>: 209.7 MB
Mac Mini HD (disk0s2) / [Startup]: 749.81 GB (467.41 GB free)
PIONEER DVD-RW DVRTS08
USB Information: ?
LEXAR ImageMate RW022 Reader 15.93 GB
S.M.A.R.T. Status: Verified
disk1s1 (disk1s1) <not mounted>: 209.7 MB
Untitled 1 (disk1s2) /Volumes/Untitled 1: 7.97 GB (7.93 GB free)
Recovery HD (disk1s3) <not mounted>: 650 MB
Apple, Inc. Keyboard Hub
Apple Inc. Apple Keyboard
Apple Computer, Inc. IR Receiver
AKM              AK5370
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper: ?
Anywhere
Kernel Extensions: ?
[loaded] com.iospirit.driver.rbiokithelper (1.7.2) Support
Problem System Launch Agents: ?
[failed] com.apple.CalendarAgent.plist
[failed] com.apple.tccd.plist
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.bombich.ccc.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
Launch Agents: ?
[loaded] com.oracle.java.Java-Updater.plist Support
User Launch Agents: ?
[loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
User Login Items: ?
Dropbox
Internet Plug-ins: ?
Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 Support
FlashPlayer-10.6: Version: 14.0.0.145 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 65 Check version
Flash Player: Version: 14.0.0.145 - SDK 10.6 Outdated! Update
RogersOneNumber_68286: Version: 1.0.68286 - SDK 10.5 Support
QuickTime Plugin: Version: 7.7.1
SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
Silverlight: Version: 5.1.20125.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
Audio Plug-ins: ?
AirPlay: Version: 1.7 - SDK 10.8
iSightAudio: Version: 7.7.1 - SDK 10.8
iTunes Plug-ins: ?
TuneUp Visualizer: Version: (null) Support
Quartz Composer Visualizer: Version: 1.4 - SDK 10.8
User Internet Plug-ins ?
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
3rd Party Preference Panes: ?
Candelair Support
Flash Player Support
Flip4Mac WMV Support
Java Support
MacFUSE Support
Tuxera NTFS Support
Time Machine: ?
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Mac Mini HD: Disk size: 698.32 GB Disk used: 263.01 GB
Destinations:
Data [Network] (Last used)
Total size: 2
Total number of backups: 162
Oldest backup: 2012-01-06 09:53:34 +0000
Last backup: 2014-08-14 02:24:59 +0000
Size of backup disk: Adequate
Backup size 2 > (Disk used 263.01 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
      51% CalendarAgent
      4% WindowServer
      4% syslogd
      3% Dropbox
      1% activitymonitord
Top Processes by Memory: ?
434 MB WebProcess
156 MB PluginProcess
115 MB mds
90 MB ReportCrash
90 MB Finder
Virtual Memory Information: ?
5.08 GB Free RAM
1.76 GB Active RAM
103 MB Inactive RAM
822 MB Wired RAM
561 MB Page-ins
0 B Page-outs

Repair Permissions: Slow or Not Working?

Similar Messages

Maybe you are looking for