Repair runtime c error in Itunes

when I updated Itunes, I got a Runtime C++ error and Itunes no longer works. I've unintalled, then reinstalled from the website. Still nothing but the Runtime Error

Hi,
Thanks for getting back to me. I should've dont this first up, but i Googled my problem and i went to the following site:
http://forums.techguy.org/multimedia/581031-itunes-runtime-error.html
Which had the answer. So for those of you who have similar issues all you need to do to fix it is:
1. Go to Start/All Programs
2. Find Apple Software Update
3. And then run.
4. Restart your PC
Once i did the above everything came up smelling of roses.
Cheers!

Similar Messages

IMicrosoft Visual C++ Runtime Library error with iTunes 7.3 (?)

When I attempted to launch iTunes this morning, I got the following message (cut and pasted into notepad):
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: E:\Program Files\iTunes\iTunes.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
OK
ITunes then closes down before I can check which version I'm running (think it's 7.3). Does anyone know what is going on?
I haven't installed any software since closing it down last night, and I have rebooted since the error first appeared but it keeps occurring.

Just installed iTunes 7.3 only to constantly see an "error -50" message pop up every 10-15 seconds. How can this be fixed without losing all my "View Options" and data? I've researched Support page to find many others with the same problem, except your solution. How do you uninstall iTunes 7.3 in order to reinstall it?

ITunes crashes when doing a power search. I get a Microsoft Visual C Runtime Library Error message: Program C:\Program Files (x86)\iTunes\iTunes.exe R6025. Pure virtual functional call. If I select ok, Windows 7 pops up with iTunes has stopped working

iTunes crashes when doing a power search. I get a Microsoft Visual C Runtime Library Error message: Program C:\Program Files (x86)\iTunes\iTunes.exe R6025. Pure virtual functional call. If I select ok, Windows 7 pops up with iTunes has stopped working and then it shuts iTunes down. Anyone else every have this issue. Any ideas on a fix?
Thanks,

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

I have made many attempts to install the 11.1.4.62 iTunes update unsuccesfully! Error 6034, iTunes.exe has made an attempt to load the C runtime library incorrectly. I see that many people is having the same problem. How do I solve it...

I have made many attempts to install the 11.1.4.62 iTunes update unsuccesfully! Error 6034, iTunes.exe has made an attempt to load the C runtime library incorrectly. I see that many people is having the same problem. How do I solve it...

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components; this won't affect its library, but that should be backed up anyway.
(99115)

ITunes Error 7, (windows error 1114) runtime library error R6034

Need help, update failed, iTunes Error 7, (Windows error 1114) runtime library error R6034, lost iTune library.

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I continue to get r6025 runtime error with iTunes version 10.6.3.25. Have uninstalled and reinstalled twice. Happens when I search in iTunes Store. Ideas to fix?

I continue to get r6025 runtime error with iTunes version 10.6.3.25. Have uninstalled and reinstalled twice. Happens when I search in iTunes Store. Ideas to fix?

Hi,
got it fixed! My Son had both files on his Win7 iTunes installation. Never mind he had no issues whith ths iTunes and iPhone Sync. So I checked my other Win XP PC, where I don't have this problem syncing my ipad, and surprise. Both files do NOT show up on this PC. So I renamed the iTunesPhotoProcessor.exe I found under c:\program file\iTunes and synced again my iPhone and it went through without any error. So the problem might be and unremoved iTunesPhotoProcessor.exe or the missing iTunesPhotoProcessor.dll under the iTunes install root folder and this even if I had checked that the folder was completely removed during iTunes unistall.
Please try yourselve and just rename the iTunesPhotoProcessor.exe to iTunesPhotoProcessor.exe_ under c:\program file\iTunes or get a copy of the missing iTunesPhotoProcessor.dll and cp to c:\program file\iTunes.

TS3212 Just attempted to download current update of Itunes into my HP windows 7 computer. I've never had trouble before but now it will not run. Runtime Error R6034 an app has make an attempt to load the C runtime library incorrectly. Itunes Error 7

Just attempted to download current update of Itunes into my HP computer with Windows 7. I've never had trouble before but now it will not run. Runtime Error R6034 an app has make an attempt to load the C runtime library incorrectly. Itunes Error 7

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99714)

Itunes won't open 'error: new itunes library'

My itunes was playing up.
Not recognising my iphone 4s.
It then told me I had to install the new itunes to make m iphone compatible with the computer.
I did so and now the itunes will not open saying "Error: New Itunes Library' WHY?!? This is really frustrating me!!
Thanks.

georgiamomma -
There are a few things you could try,but what worked for me was to download a fresh installation file from apple.
Your update got corrupted somehow. Doing the usual of going to control panel, clicking on Programs and Features, clicking on iTunes in the list and selecting REPAIR probably won't fix this issue, as sometimes repair reverts the installation to its previous version and then your iTunes Library.itl file can't open because it's from a newer version than the one REPAIR reinstalled. You can try that process, but I doubt it will work.
Do not change any files and/or their existing locations. Also, do not uninstall iTunes from your machine. Simply go to Apple's web site and download their latest version suitable for your particular computer. Once downloaded, double click the installer and follow the prompts. You should be able to launch itunes afterward, and your library will magically re-appear.
Again, DO NOT uninstall the old version, and do not rename, remove and/or replace any of the original files prior to installing the latest version over what's already on your machine. Good luck!

C runtime library error message

Windows Vista User
After upgrading to new iTunes version, this error message appears:
Runtime Error!
Program: C:\Program Files (x86)\iTunes\iTunes.exe
R5034
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
This is followed by the following error screen
iTunes was not installed correctly. Please reinstall iTunes
Error 7 (Windows error 1114)
Twice I have uninstalled and installed iTunes, same result.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Error Message: iTunes could not back up the iPhone because an error occurred

Error Message: iTunes could not back up the iPhone because an error occurred.
The thing is - I have no idea what error have I encountered!
Usually, I would assume the previous backup file is corrupted and I will proceed to delete the old backups. I did the same this time round, and it's still unable to sync. Now I have no more backup files!
I have tried -
1. Deleting old backup files.
2. Restarting iPhone 4S & iMAC.
3. Remove
I am using iOS 5.1 on iPhone 4S, and iTunes 10.6.1 on Mac OSX Lion. My phone is not jail-broken in the first place.
Does anyone face the same problem?
I need to back up my files!!!

Unfortunately, "because and error occured" doesn't give you much to go on. Some general things I would try if you haven't already:
Use Disk Utility on your mac to repair disk permissions, then reboot and try backing up again.
Use Finder to go to ~/Library/Application Support/MobileSync/, then control-click on the Backup folder and select Get Info, then check Sharing & Permissions at the bottom and make sure your username has read & write priviledges
Try closing all apps, then reset your phone: double-tap the home button, tap and hold the apps at the bottom until they wiggle, tap the minus sign on all apps to close them. Then reset your phone: hold the on/off and home buttons until you see the Apple logo (ignore the off slider that appears first), and release
Try a different usb to dock connector cable; ensure that your case isn't interfering with a good connection to the dock connector at the bottom of your phone; clean the dock connector at the bottom of your phone (e.g., with a dry toothbrush); troubleshoot your usb connection (http://support.apple.com/kb/TS1286)
I know this looks like a laundry list, but unfortunately it's hard to isolate the problem without a clear error message. If the problem persists, you might try posting in the iMac or iTunes forums for other ideas.

ITunes stopped working,C++ library error, removed iTunes, now iTunes wont download

Have been using iTunes for years on laptop with windows vista (32 bit). recently started getting itunes errors such as C++ runtime library error and R6034 error. Itunes stopped working. Read the boards, I deleted itunes and other products from the trouble shooting directions (e.g., bonjour, mobile me etc), and tried to download itunes again. now itunes wont download (I have 20 MB/140MB available memory). stuck at this point - Itunes not on laptop, but cant download new itunes.....

Sorry for the delay. Tried running the fixit program (1 time via internet explorer, 1 time via firefox), the firefox attempt downloaded the fixit program, but when trying to run it I get a pop up window that indicates that the troubleshooter is not available and that the fixit program is invalid or has expired and a new website is given for the new program (same happened with the internet exploere attempt- it directed me to the same window and to the same website)......the website is:
http://support.microsoft.com/fixit/
there are several buttons to choose from and reviewed them- I found the uninstall fix that you described in the windows button. I tried to download and run the fix from both internet explorer and firefox, however after downloading, when i run the program I eventually get the same window that says that the troubleshooter is not available......

Error installing iTunes 8 && uninstalling iTunes 7.7

I'm having a problem upgrading to iTunes 8.
My OS is Vista Ultimate 64-bit.
When installing iTunes 8 64-bit installer the setup processes reaches the "Coping New Files" stage, the progress bar pauses for a few moments, then the status changes to "Rolling Back". The installer goes to the finish page with the message:
"+The installer encountered errors before iTunes could by configured.+
+Your system has not been modified. To retry these operations at a later time, please run the installer again.+"
This occurs with the iTunes 8 32-bit installer as well.
iTunes 7.7 32-bit is currently installed. When I attempt to uninstall through Windows Add/Remove the status progress bar crashes without error during the uninstall. iTunes 7.7 is still in my program list. I attempted the "repair" option for iTunes to the same effect.
Anyone know what is being checked to make the iTunes 8 setup be rejected?
Is there a good way to manually remove iTunes?

I have *Windows Vista 32 bit*, so BE CAREFUL with this reply, since I noticed you have a 64 bit machine. I just updated from iTunes7 to iTunes8, and got an error, with both iTunes8 and Quicktime 7.5.5. A solution has been posted by "rjchaney". If you go to the disscussion thread search and type:
'Error 46 could not load or find the Quick Time ActiveX Control', without the quotes, then narrow the results by 'rjchaney', you will see a response from 'rjchaney' from Houston, TX to 'aveniras'. _*THIS SOLUTION WORKED on my dell windows vista 32 bit computer.*_ Apparently, the permissions have to be reset in the REGISTRY ! You have to run the command prompt window as an Administrator, for the reset.cmd file to be correct. Since Apple approved this solution for me, _*I think the solution to a 64 bit machine might be similar. I don't know if this will work for you.*._ Just check the commands in the reset.cmd file, and maybe this will work for you.
_*THIS SOLUTION WORKED on my dell windows vista 32 bit computer.*_
In case you don't want to search, I am copying and pasting the solution from 'rjchaney' here:
There is an old NT utility called SubInAcl.exe that can be used to reset permissions in Windows XP and also in Vista.
Step 1: Download subinacl.msi from the link
http://go.microsoft.com/fwlink/?LinkId=23418 and install it.
Step 2: Download a modified version of reset.cmd from here
http://gerger.com/o/assets/x/?id=22540
and save the file in 'C:\Program Files\Windows Resource Kits\Tools'.
Step 3: Open Command Prompt and type the following without quotes (hit Enter):
'cd c:\program files\windows resource kits\tools'
Step 4: Now type 'reset.cmd' and hit Enter (without quotes)
You will see the Command Line Tool running for some seconds. The issue should have been fixed and Quicktime should run again.
_*This solution Worked on my Dell Inspiron 530s, with Windows Vista 32 bit*._

Pc says error new itunes library?

PC says Error New Itunes Library??

This approach may help...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
If not try a repair install of iTunes, or uninstalling and then reinstalling.
tt2

Adobe Audition 3.0 Microsoft C++ runtime library error

I need help with this error
I've successfully installed Audition 3.0 on my computer and unfortunately, whenever I try to open the program, an error appears which says there is a Microsoft C++ Runtime library error.
Can you help me this?

There may be some information in this thread on the Audition CS5.5, CS6 & CC part of the forum which will help you.
MSVCR7I.dll
I recently had some similar problems with running another software and also installing an upgrade to yet another. In my case it was with MSVCR110.dll missing. Having downloaded the MS Redistributable from http://www.microsoft.com/en-us/download/details.aspx?id=30679 when I installed it it gave me the option to Repair which worked.

Java Runtime Environment Error - Note Pads On Desktop

I have gotten three note pads on my desktop last week time: Wed Apr 29 08:32:02 2009, time: Thu Apr 30 08:42:51 2009, Sat May 02 09:43:38 2009.
I am wondering why I got three note pads on my desktop telling me about Java Runtime Environment Error.
Is this how Java Runtime Environment Error lets you know there is a problem. When a window pops up saying there is a Java Runtime Environment Error problem I normally send it.
Nothing every happens when I send Java Runtime Environment Error. How can this problem be fixed.
And why am getting Java Runtime Environment Error on my desktop. The second & third Java Runtime Environment Error cant fit in this post because of Maximum allowed is 7500 only. And I had to remove the bootom part of the first Java Runtime Environment Error just to make it fit.
If you need me to I could Post the other two Java Runtime Environment Error.
Here is the first Java Runtime Environment Error with time: Wed Apr 29 08:32:02 2009
# An unexpected error has been detected by Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d768be5, pid=3664, tid=3636
# Java VM: Java HotSpot(TM) Client VM (10.0-b23 mixed mode windows-x86)
# Problematic frame:
# C 0x6d768be5
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
--------------- T H R E A D ---------------
Current thread (0x1b271400): JavaThread "thread applet-vmain.class" [_thread_in_native, id=3636, stack(0x1bb10000,0x1bc10000)]
siginfo: ExceptionCode=0xc0000005, writing address 0x52341000
Registers:
EAX=0x00000005, EBX=0x00000005, ECX=0x52341000, EDX=0x000000aa
ESP=0x1bc0e7f0, EBP=0x1bc0e80c, ESI=0x52ae25d0, EDI=0x52340490
EIP=0x6d768be5, EFLAGS=0x00010283
Top of Stack: (sp=0x1bc0e7f0)
0x1bc0e7f0: 00000000 52ae25d0 1b2714f4 00000003
0x1bc0e800: 00000000 0000007a 05c0e838 1bc0e838
0x1bc0e810: 6d76923e 00000000 52ae25d0 6d76929a
0x1bc0e820: 6d762730 00000000 00000000 1b271400
0x1bc0e830: 38d78dc8 38d78dc8 1bc0e888 24a1a2f2
0x1bc0e840: 1b2714f4 1bc0e8a4 00000000 00000000
0x1bc0e850: 00000000 38d79459 1bc0e8a4 1bc0e860
0x1bc0e860: 1b271405 326f9ef8 1bc0e860 38d78dc8
Instructions: (pc=0x6d768be5)
0x6d768bd5: 49 88 5d ff 8d 3c cf 7e 1a 8b cf eb 03 8a 5d ff
0x6d768be5: 88 19 8b 5d f8 ff 45 f8 89 59 08 83 c1 18 39 55
Stack: [0x1bb10000,0x1bc10000], sp=0x1bc0e7f0, free space=1017k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C 0x6d768be5
C 0x6d76923e
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::StubRoutines (1)
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::StubRoutines (1)
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::StubRoutines (1)
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::StubRoutines (1)
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::Interpreter
v ~BufferBlob::StubRoutines (1)
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x04efe400 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=2992, stack(0x1f2e0000,0x1f3e0000)]
0x04efcc00 JavaThread "Thread-11" [_thread_blocked, id=2376, stack(0x1b910000,0x1ba10000)]
=>0x1b271400 JavaThread "thread applet-vmain.class" [_thread_in_native, id=3636, stack(0x1bb10000,0x1bc10000)]
0x1b265800 JavaThread "AWT-EventQueue-3" [_thread_blocked, id=2692, stack(0x1ba10000,0x1bb10000)]
0x1b228400 JavaThread "Thread-7" [_thread_in_native, id=1336, stack(0x1b810000,0x1b910000)]
0x1b25c000 JavaThread "thread applet-vmain.class" [_thread_blocked, id=2600, stack(0x1b710000,0x1b810000)]
0x1813c400 JavaThread "AWT-EventQueue-2" [_thread_blocked, id=188, stack(0x1b110000,0x1b210000)]
0x180e3800 JavaThread "AWT-Shutdown" [_thread_blocked, id=1592, stack(0x1b010000,0x1b110000)]
0x18039400 JavaThread "CacheCleanUpThread" daemon [_thread_blocked, id=1656, stack(0x1aaf0000,0x1abf0000)]
0x18045400 JavaThread "CacheMemoryCleanUpThread" [_thread_blocked, id=3456, stack(0x1a8e0000,0x1a9e0000)]
0x18040000 JavaThread "traceMsgQueueThread" daemon [_thread_blocked, id=3620, stack(0x19ab0000,0x19bb0000)]
0x18036400 JavaThread "AWT-Windows" daemon [_thread_in_native, id=1416, stack(0x199b0000,0x19ab0000)]
0x1803a400 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=3248, stack(0x18440000,0x18540000)]
0x04eaf800 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=1728, stack(0x17de0000,0x17ee0000)]
0x04eb1000 JavaThread "CompilerThread0" daemon [_thread_blocked, id=3476, stack(0x17b50000,0x17c50000)]
0x04ec5000 JavaThread "Attach Listener" daemon [_thread_blocked, id=1596, stack(0x17a00000,0x17b00000)]
0x04ec6c00 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=2832, stack(0x17900000,0x17a00000)]
0x04e97800 JavaThread "Finalizer" daemon [_thread_blocked, id=1868, stack(0x17800000,0x17900000)]
0x04ede000 JavaThread "Reference Handler" daemon [_thread_blocked, id=4016, stack(0x17700000,0x17800000)]
0x04eb5c00 JavaThread "main" [_thread_in_native, id=2332, stack(0x0e8b0000,0x0e9b0000)]
Other Threads:
0x04ebec00 VMThread [stack: 0x13320000,0x13420000] [id=1320]
0x04eb4000 WatcherThread [stack: 0x17ee0000,0x17fe0000] [id=1908]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 6848K, used 1795K [0x32540000, 0x32ca0000, 0x32ca0000)
eden space 6144K, 29% used [0x32540000, 0x32700ca0, 0x32b40000)
from space 704K, 0% used [0x32bf0000, 0x32bf0090, 0x32ca0000)
to space 704K, 0% used [0x32b40000, 0x32b40000, 0x32bf0000)
tenured generation total 90752K, used 82522K [0x32ca0000, 0x38540000, 0x38540000)
the space 90752K, 90% used [0x32ca0000, 0x37d36858, 0x37d36a00, 0x38540000)
compacting perm gen total 12288K, used 8443K [0x38540000, 0x39140000, 0x3c540000)
the space 12288K, 68% used [0x38540000, 0x38d7ee28, 0x38d7f000, 0x39140000)
No shared spaces configured.
Dynamic libraries:
0x00400000 - 0x0049c000      C:\Program Files\Internet Explorer\iexplore.exe
0x7c900000 - 0x7c9b2000      C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c8f5000      C:\WINDOWS\system32\kernel32.dll
0x77dd0000 - 0x77e6b000      C:\WINDOWS\system32\ADVAPI32.dll
0x77e70000 - 0x77f02000      C:\WINDOWS\system32\RPCRT4.dll

I encountered same error one time, and I tried to update my java application and nothing happens. So I re install the application and it works fine. Application sometimes can get corrupted so it needs repair.
[back pain relief|http://topbackpainrelieftips.com]

Repair runtime c error in Itunes

Similar Messages

Maybe you are looking for