Repair's Macbook pro 2011

Hi,
I would like know around how much it would cost to replace the batterie + upgrade the ram to 8GB + repair the trackpad for a MacBook Pro 2011 from the apple store.
Thanks
-Xavier

Go to Crucial.com to purchase RAM and do the upgrade yourself. There are plenty of videos online showing you how to perform this upgrade and Apple has made RAM a user upgradeable part for most Macs. Take it to an Apple Store to receive a free assessment of your system and they will tell you how much it will cost for the repair.

Similar Messages

MacBook Pro 2011 Repair Extension Program for Video Issues -Feedback?

Anybody have any feedback from the MacBook Pro 2011 Repair Extension Program for Video Issues?
I had my early 2011 15 inch 8,2 repaired (free) under the extension program. The machine now appears to run well - but much hotter than before. The case is significantly hotter - especially at the GPU corner and the fans are constantly on moderate to high (not full). Anybody else experiencing similar changes?

Run an Apple Hardware Test;
https://support.apple.com/en-us/HT201257
Note an error free AHT is not definitive.
install iStat menus:
http://bjango.com/mac/istatmenus/
Set Activity Monitor to ALL PROCESSES and set CPU to display values from high to low.
When the MBP gets hot, post images of both for inspection.
Ciao.

Macbook pro 2011 repair extension

I have an early 15 inch macbook pro 2011 which has the same exact issue that the repair extension covers yet my serial number is not on the list. Did Apple miss something?

What he is referring to, I suspect, is the same issue I encountered. I have a MacBook Pro (Retina, 15-inch, Early 2013). The Repair Extension Program page lists that model. But it goes on to say "Use the "Check your Coverage" tool on the Apple Support site to determine if your MacBook Pro model matches the list of affected products below." Doing so yields the following results for my computer:
Valid Purchase Date
Telephone Technical Support: Expired
Repairs and Service Coverage: Expired
This would seem to indicate my particular machine is not eligible. But, since it has been experiencing unexplained shutdowns (requiring a restart), I feel it should be. I found this thread while looking for more information.I suspect my only recourse is to take it in to an Apple store and hope I can convince them to repair it. Do you agree?

Macbook Pro 2011 won't turn on (RAM issue?)

(Macbook pro 2011) I had water damage so I sent in to apple for a complete makeover and they pretty much replaced everything. The laptop seemed to be working fine but the issue is that when I put my laptop to sleep / turn off it won't turn back on. I haven't had the time to take my laptop back to the apple store due to projects / travelling. I've found that there is one quick fix, manually resetting the ram by taking the RAM chips out for a second then re-inserting them. The other way is to hold Command+Option+P+R 3 times before reboot and that'll work temporarily for a day maybe. I plan on taking it to the apple store in a day or so if the problem doesn't resolve itself. Do you guys have any suggestions?
Thanks,

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Macbook Pro 2011 - Apple It's time

Hi,
So I'm the owner of a new second-hand 17" Macbook, for years I've dreamed of getting one of these and today was finally the day it happened. Specs are
Macbook Pro 2011 Late
i7 2.4Ghz
6770m
8gb RAM
At first the laptop booted up fine so I decided to do what any new proud macbook owner would do, show it of at work. During the course of the day I experienced intermittent freezing issues and eventually a blue screen of death. I thought to myself that I must of brought a dud and immediately went to contact the person I brought it of for a refund. Being a genuine trader he was more than happy to oblige and give me a full refund. Frustratingly this macbook had already grown on me enough to the point where I was determined to research into solution. Initially I suspected a HDD fault so I went to attempt a apple internet recovery, all that solved was my blue screen of death and changed it to a grey screen of death. Digging deeper it was clear from countless others in my situation that the issue was being caused by the GPU.
Now I'm no apple genius but I have enough of a computer technical background to know when something has not been done right. Now clearly apple has done wrong in the manufacturing process of GPU soldering and thermal paste application. This issue is nowhere relevant to software except for the point in which the system switches from the integrated to the faulty discrete GPU like it's suppose to in high-intensive tasks. Having this macbook for only a day and some determined researching its pretty simple to join the dots. The soldering process and material they used was doomed to fail from the start, eventually all 2011 models with discrete GPU's will burn out, it just depends on how well their owners have taken care of them. In regards to the thermal paste application you will be able to see from my images the kind of care and pride apples has undertaken in applying it. There was more around the CPU & GPU than there was on itself, that's like having a peanut butter and jelly sandwich with most of the peanut butter and jelly smeared around the plate. Considering this laptop would of cost close to 4500NZ back in the day I can't imagine what other original 2011 Macbook owners are feeling.
What makes it worse is that apple techies you go to will say a full logic board replacement will be needed from your own pocket when your macbook was already doomed, isn't that a way to rub further salt into the wounds Apple. Opening up my macbook it was obvious to see that the logic board inside was not the original and sometime during it's lifetime it too had a full logic board replacement. However I can't say if it was for the same reasons. Regardless it's obvious that replacing the logic board does not solve the issue and wastes everybody's time and money.
Apple, these macs require two things.
-A solder repair for the GPU
-A re-application of thermal paste
It's really not that much to ask considering the worth of these laptops, also wouldn't you rather have these leaving a legacy of the ultimate desktop replacement than apples shameful ticking time bomb?
I'm typing this of the very macbook having these issues so for anyone who wants a temporary fix please refer to the free gfxCardStatus software which allows you to force integrated graphics only. For now it's stable but dreadfully hinders the potential this beast was made for.
"Sometimes when you innovate, you make mistakes. It is best to admit them quickly, and get on with improving your other innovations."
"Quality is more important than quantity. One home run is much better than two doubles."
Steve Jobs
In hopes that apple does not remove this post.

There is excessive swapping of data between physical memory and virtual memory.
That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
In the Activity Monitor application, select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

I've installed windows 7 with the help of bootcamp on my macbook pro 2011. Please help me how to install mac drivers for windows7 64 bit???

I've installed windows 7 with the help of bootcamp on my macbook pro 2011.
Please help me how to install mac drivers for windows7 64 bit???

You either download drivers from within Boot Camp Assistant and save to USB FAT disk, or you insert and use 10.6.x OS X DVD when in Windows and install and run the SETUP from there.
General Help:
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
- support articles and tips, how to.
http://www.apple.com/support/bootcamp/
Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
http://support.apple.com/kb/HT1846
Step 4: Install the Boot Camp Drivers for Windows
After installing Windows, install Mac-specific drivers and other software for Windows using your Mac OS X installation disc. The Mac OS X disc installs drivers to support Mac components, including AirPort,built-in iSight camera, the Apple Remote, the trackpad on a portable Mac, and thefunction keys on an Apple keyboard.
The Mac OS X disc also installs the Boot Camp control panel for Windows and theApple Boot Camp system tray item.
To install the Boot Camp drivers:
1 Eject the Windows installation disc.
2 Insert the Mac OS X disc. If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
3 Follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
Windows that appear only briefly during the installation don’t require your input.
If nothing appears to be happening, there may be a hidden window that you mustrespond to. Check the taskbar and look behind open windows.
Important: Do not click the Cancel button in any of the installer dialogs.
4 After your computer restarts, follow the instructions in the Found New Hardware Wizard to update your software drivers (Windows XP only).
5 Follow the instructions for any other wizards that appear.
6 Check for updated Boot Camp drivers by using Apple Software Update or going to www.apple.com/support/bootcamp.
If You Have Problems Installing the Device Drivers
If it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.
To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed Windows Logo testing, click Continue Anyway.
If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.

Issue with Macbook Pro 2011

Hi there. I have a brand new MacBook Pro 2011 and I'm having some problems with my wireless connection. I have in the same room a Mac Mini, my Ipad , my Ipod, 3 PC's and all of them have a wireless connection. I notice that since my last MacOSX update I have some problems with my wireless connectivity in my Macmini. Now I'm having the same problem in my macbook pro. I have internet in all my other devices but no internet in my Mac Mini or Macbook. The Access point is 5 meters away from my devices. I put some repeater in the middle to repeat the signal but I'm getting the same beavior. Can someone help me on this? If I go to the network setting and renew my DHCP address I can access the internet but after 15 minutes I'm getting the same problem again.

The signal bar on the menubar is not always an accurate indicator of how strong the signal is. A more accurate measure is if the signal drops entirely and you are definitely in range of the airport base station. Also anywhere within 3 meters you may get signal degradation because of overlapping radio waves cancelling each other out. You also have the option to ask to speak to a customer relations person when you call AppleCare, and ask for an expedited repair, and have your airport card properly seated. Sometimes they can get loose, or the antenna can get loose inside, though normally this isn't a problem unless the machine has to be opened for some reason.

My macbook pro 2011 (late) have blackscreen on startup?

i have macbook pro 2011 (late)
i go holiday 3 days and i'm not use my macbook and i go back from holiday and i have blackscreen on startup..
and if i want repair to apple how to make appointment? i'm live in taiwan
anyone can help me?

First, try Resetting your Mac's PRAM and NVRAM
If that doesn't help, try Intel-based Macs: Resetting the System Management Controller

My Macbook pro 2011 suddenly has a really slow bootup. What can I do?

My Macbook pro 2011 suddenly has a really slow bootup. What can I do? I did install a cannon printer upgrade and security upgrade. Not sure if it was something to do with that. Also I tried the disk utility repair and didn't improve anything. I also reset PRAM and SMC.

1. Try booting in e Verbose mode - press and hold [cmd] + [v] keys just right after the boot chord sounds till you get a black screen and white letters.
if there are some delays in the boot process - you should see where the system is stuck.
this mode is not permanent - the next [re-] boot will be normal.
2. repair permissions. disk utility does fine. Disk Warrior is better.
sometimes after half done updates (it may happen though should not) there are items that are "belonging to someone else"
3. try cache cleaner (or there are some other utilities as well - I just like SlCC more) http://www.northernsoftworks.com/snowleopardcachecleaner.html - it's shareware though the basic functionality is free for you to use.
Try caches -> deep cleaning (please read the developers site what it does) and select checkmark at all options - reply yes to the requests and after a reboot the next reboot should be as it is intended.
p.s be sure you do have backup

MacBook Pro 2011- Allowed updates to install for iTunes software and Microsoft office (I think). After rebooting, computer wouldn't progress past grey apple screen with loading circle.

I have a MacBook Pro 2011. I allowed updates to install for iTunes software and Microsoft office (I think). After rebooting, computer wouldn't progress past grey apple screen with loading circle. No progression bar ever appeared. It just sits and spins. I tried rebooting with Command + Option + R + P and hearing the chime twice....this did not work.
I also tried Command +Option+R which took me to internet recovery. From there, I chose reinstall Mac OS X Lion 10.7 but it says my hard drive is locked so I wasnt able to select it. What do I do???? Help! I don't want to lose my files and it doesnt appear that I've used Time Machine Back Up.

macbookpro2011ISU wrote:
I also tried Command +Option+R which took me to internet recovery. From there, I chose reinstall Mac OS X Lion 10.7 but it says my hard drive is locked so I wasnt able to select it.
I you upgraded to OS X 10.8, then use RecoveryHD by holding Command R at boot time (no option) and reinstall OS X over itself that way so your installing Mountain Lion.
Also Disk Uility can be used to Repair the Macintosh HD parttion.
Also you can use that RecoveryHD to format and install OS X onto a external drive, then option/alt key boot from it and access your files on the non-booting internal drive before erasing, reformatting and reinstalling OS X fresh.
Create a data recovery/undelete external boot drive
Most commonly used backup methods
..Step by Step to fix your Mac

Macbook Pro 2011 clamshell mode broken by latest software update?

After installing the latest MacBook Pro software update and EFI update through Software Update in the evening May 4, I am unable to enter clamshell mode any more. It used to work before. After waking up in the clamshell mode, the machine promptly goes back to sleep. On subsequent attempts to wake up the system, the laptop itself appears to wake up (at least the sleep light stops blinking) but the display does not even wake up. I can still work with external dsisplay with the lid open but this is highly annoying. I have reset the PRAM with no effect. The machine is a 2011 MBP, 15" inch, 2.2 GHz quad i7. Keyboard and mouse are wireless Microsoft desktop but the problem is also present with wired peripherals.
Does anyone else see this problem after installing the latest patch?

Okay, I'll add my frustration here as well.
I've had this problem too, and more noticable since the 1.4 update.
I posted a thread similar to this here.
But I'll just copy over what my main problem was...
Whenever I plug my computer into my Cinema Display (with the computer closed) it won't wake up fully. The status light will come on, any external hard drives will spin up, but the display won't turn on and the computer will go back to sleep.
I have to restart the computer manually to get it to work normally, and if I disconnect it while it's between the sleep and wake mode and try to open it, the backlight will come on but the screen will remain black, causing me to have to force restart it.
This is in addition to my first problem with the backlit keyboard not coming on automatically after sleep, which was temporarily fixed by resetting the SMC, but it goes back to the problem after a week or so.
What could be causing either of these problems? Could it have something to do with BootCamp since I have it installed, or is there a defect?
I would bring it back to Apple, but there's a small dent in the front right corner, and I'm afraid they would deny any problem I have.
I took my MacBook Pro (2011, i7 2.2, 17") into the Apple Store on Monday, and after about an hour of attempting to replicate the problem with a different monitor, there was only one time where there was any sort of problem.
The employee told me to see if there will be a fix, or otherwise they will replace the logic board for me.
One thing I'd like to add as a note...
It seems that the problem is more prominent when I have my computer with everything on it as usual. As in, before I took it to the Apple Store I performed a clean install of OS X, and that may be related to how bad the problem is, any opinions?
I had attempted at reinstalling OS X from a Time Machine Backup, but the problems continued shortly after completetion. In addition to this, I clean installed OS X, and manually reloaded my applications and media, hoping that the problem had stemmed from some kind of broken file system that could be repaired by a new install.
But no matter how I do it, the problem comes back despite the method. It is really something I want fixed, as I pretty much only use it in clamshell mode when home...

Bluetooth not working macbook pro 2011, AHT found nothing

My macbook pro 2011 has been having some issues with bluetooth. The system doesn't even recognize as having bluetooth hardware. I went under the hardware profile and it actually says No information found under bluetooth. I was able to do a full hour diagnostic test using Apple Hardware Test and everything was all clean. I'm not sure if this is Yosemite related or not. I definitely remember using my bluetooth enabled keyboard and mouse on my system before I upgraded to Yosemite. Wifi works fine. I've tried resetting PRAM, but nothing. I'm at a loss, not sure if there is anything else I can do.

Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

My MacBook Pro 2011 Crashed!

Hi,
I have MacBook Pro 2011 model. It came with snow leoprod but then I upgraded it to Mountain Lion sometime in 2012. Initially everything was fine but since last 2-3 months, I started noticing that performance was getting back. I checked CPU and Memory usage, and everything seems to be fine. I had to idea why it was getting bad.
Two days ago, my MBP failed to start. I used 'option' command during startup to run disk utilities and did check for disk problems including permissions. Though disk repair did not return any errors, the verify disk permissions was taking foreever to finish. I left it overnight but it still did not finish. Thats when I thought something was wrong with disk permissions.
I then used the recover option to reinstall Mountain Lion OS. The download was via internet. It downloaded successfully but then when it tries to reinstall OS, it gets stuck. I left it for 5-6 hours but installation never finishes. The remaining time to install shows some ridiculous number like -6,5678 minutes remaining. So did hard reboot by pressing power button to restart and run disk diagnostics. I again ran all checks and everything showed find. SMART status shows Verified. No disk errors or permissions at all.
I have no idea what is going on. Can somebody please help me? I basically want to do this:
1) I have to retrieve few documents from the harddisk and copy it to my external disk. Can you please let me know if this is possible?
2) If I can achieve # 1, then try to do a clean install of OS. Since I was not supplied any DVDs with OS, I am not very sure how to clean install Mountain Lion on my laptop.
BTW, I don't have any other Mac products. If I have do anything like USB bootable disk, then I have to do it on my Windows Vista laptop.
My MacBook Pro is with following configuration:
1) CPU i7
2) Memory 4 GB
3) HDD 500 GB
Please help me!
Regards,
Tihor

Hi,
Can somebody please help? Any suggestions?
Thanks!
Tihor

Macbook Pro 2011, Graphic automatic switch - High Res, antiglare screen

I have had a hugh problem with my new macbook Pro, 2011 with High Res, Antiglare screen. The automatic Graphic switching causes the screen to flicker about every 10 seconds when the comuter gets hot. It happens whenever a graphic intents piece of software has been active for some time and I return to the desktop. After two attempts to repair the computer I have installed gfxCardstatus and turned off the systems own autoswitching. This has eliminated the problem. But I hope that Apple will come up with a software update, that will make its own OS capable of controlling the autoswitch for the High Res screen.

Hey andersand! Look, I don't have a definite solution for you but I do have a 3rd Party application that I use to manually switch between graphics cards! It's called GFXCardStatus and you can choose what graphics you want to use from a drop-down menu in your menu bar.
You're right to assume that the graphics switching would cause the flickering and not something else, and I think that using this software would at least reduce the amount of flickering that occurs.
Link here, http://codykrieger.com/gfxCardStatus and when you've installed it a tried it out, tell me if it improves at all. Good Luck!
(This was my first reply to any post ever!)

Can i connect my cintiq 12wx to my Macbook pro 2011 through the thunderbolt using the mini display port to vga adaptor?

I just bought my cintiq 12wx and was wonderding if i can connect it to my macbook pro 2011 through the thurderbolt using a mini displayport to vga adaptor? Please help!

Yes, it should work with a mini-displayport to VGA adapter. Since a 12wx also can take DVI you could use a mini-displayport to DVI adapter instead. Why go analog when you can keep it in digital!
I guess the usb is for the pen.

Repair's Macbook pro 2011

Similar Messages

Maybe you are looking for