Repair Tool Performance Problem when Zoom on Image
Aperture Friends,
I experience a huge performance hit when editing images with the Repair/Clone tool only when "zoomed" into an image. The curious part is that the repair while "zoomed in" function works fine for about 3 images, then from the 4th image on, the software grinds to almost a complete stop for several seconds after selection a source point and trying to use the repair. The mouse cursor even changes to a spinning rainbow DVD look during this time.
These are 15-20MB Raw files from a Canon 5d and we are using the most recent version of AP on a nearly brand new iMac 27", of course with Snow L, and all patches applied. The library is less than 20GB and we are not using Reference files as of yet.
I realize that these may be large files, but it is curios that it works with blazing speed to start with, then degrades.
Is this a common problem, or an identified issue? Might you more experienced folks know a resoulution?
hi!
i'm experiencing a similar problem on my imac i5 with the difference it is slow all the time. even after a reboot it's quite impossible to use the clone/repair tool. my library is about 40GB with referenced files (all on external HD fw800). i work with a 5D Mk II (which is still not supported for tethered shooting, by the way!).
(sorry if i nicked your thread )
best regards,
günther
Similar Messages
-
Performance problem when running a personalization rule
We have a serious performance problem when running a personalization rule.
The rule is defined like this:
Definition
Rule Type: Content
Content Type: LoadedData
Name: allAnnouncements
Description: all announcements of types: announcement, deal, new release,
tip of the day
If the user has the following characteristics:
And when:
Then display content based on:
(CONTENT.RessourceType == announcement) or (CONTENT.RessourceType == deal)
or (CONTENT.RessourceType == new release) or (CONTENT.RessourceType == tip
of the week)
and CONTENT.endDate > now
and CONTENT.startDate <= now
END---------------------------------
and is invoked in a JSP page like this:
<%String customQuery = "(CONTENT.language='en') && (CONTENT.Country='nl'
|| CONTENT.Country='*' ) && (!(CONTENT.excludeIds like '*#7#*')) &&
(CONTENT.userType ='retailer')"%>
<pz:contentselector
id="cdocs"
ruleSet="jdbc://com.beasys.commerce.axiom.reasoning.rules.RuleSheetDefinitio
nHome/b2boost"
rule="allAnnouncements"
sortBy="startDate DESC"
query="<%=customQuery%>"
contentHome="<%=ContentHelper.DEF_DOCUMENT_MANAGER_HOME%>" />
The customQuery is constructed at runtime from user information, and cannot
be constructed with rules
administration interface.
When I turn on debugging mode, I can see that the rule is parsed and a SQL
query is generated, with the correct parameters.
This is the generated query (with the substitutions):
select
WLCS_DOCUMENT.ID,
WLCS_DOCUMENT.DOCUMENT_SIZE,
WLCS_DOCUMENT.VERSION,
WLCS_DOCUMENT.AUTHOR,
WLCS_DOCUMENT.CREATION_DATE,
WLCS_DOCUMENT.LOCKED_BY,
WLCS_DOCUMENT.MODIFIED_DATE,
WLCS_DOCUMENT.MODIFIED_BY,
WLCS_DOCUMENT.DESCRIPTION,
WLCS_DOCUMENT.COMMENTS,
WLCS_DOCUMENT.MIME_TYPE
FROM
WLCS_DOCUMENT
WHERE
((((WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'RessourceType'
AND WLCS_DOCUMENT_METADATA.VALUE = 'announcement'
)) OR (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'RessourceType'
AND WLCS_DOCUMENT_METADATA.VALUE = 'deal'
)) OR (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'RessourceType'
AND WLCS_DOCUMENT_METADATA.VALUE = 'new release'
)) OR (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = ''
AND WLCS_DOCUMENT_METADATA.VALUE = 'tip of the week'
)) OR (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'RessourceType'
AND WLCS_DOCUMENT_METADATA.VALUE = 'press release'
AND (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'endDate'
AND WLCS_DOCUMENT_METADATA.VALUE > '2001-10-22 15:53:14.768'
AND (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'startDate'
AND WLCS_DOCUMENT_METADATA.VALUE <= '2001-10-22 15:53:14.768'
AND ((WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'language'
AND WLCS_DOCUMENT_METADATA.VALUE = 'en'
AND ((WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'Country'
AND WLCS_DOCUMENT_METADATA.VALUE = 'nl'
)) OR (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'Country'
AND WLCS_DOCUMENT_METADATA.VALUE = '*'
AND NOT (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'excludeIds'
AND WLCS_DOCUMENT_METADATA.VALUE LIKE '%#7#%' ESCAPE '\'
AND (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'userType'
AND WLCS_DOCUMENT_METADATA.VALUE = 'retailer'
At this moment, the server makes the user wait more than 10 min for the
query to execute.
This is what I found out about the problem:
1)When I run the query on an Oracle SQL client (We are using Oracle 8.1.7.0)
, it takes 5-10 seconds.
2)If I remove the second term of (CONTENT.Country='nl' ||
CONTENT.Country='*' ) in the custom query,
thus retricting to CONTENT.Country='nl', the performance is OK.
3)There are currently more or less 130 records in the DB that have
Country='*'
4)When I run the page on our QA server (solaris), which is at the same time
our Oracle server,
the response time is OK, but if I run it on our development server (W2K),
response time is ridiculously long.
5)The problem happens also if I add the term (CONTENT.Country='nl' ||
CONTENT.Country='*' )
to the rule definition, and I remove this part from the custom query.
Am I missing something? Am I using the personalization server correctly?
Is this performance difference between QA and DEV due to differences in the
OS?
Thank you,
Luis MuñizLuis,
I think you are working through Support on this one, so hopefully you are in good
shape.
For others who are seeing this same performance issue with the reference CM implementation,
there is a patch available via Support for the 3.2 and 3.5 releases that solves
this problem.
This issue is being tracked internally as CR060645 for WLPS 3.2 and CR055594 for
WLPS 3.5.
Regards,
PJL
"Luis Muniz" <[email protected]> wrote:
We have a serious performance problem when running a personalization
rule.
The rule is defined like this:
Definition
Rule Type: Content
Content Type: LoadedData
Name: allAnnouncements
Description: all announcements of types: announcement, deal, new release,
tip of the day
If the user has the following characteristics:
And when:
Then display content based on:
(CONTENT.RessourceType == announcement) or (CONTENT.RessourceType ==
deal)
or (CONTENT.RessourceType == new release) or (CONTENT.RessourceType ==
tip
of the week)
and CONTENT.endDate > now
and CONTENT.startDate <= now
END---------------------------------
and is invoked in a JSP page like this:
<%String customQuery = "(CONTENT.language='en') && (CONTENT.Country='nl'
|| CONTENT.Country='*' ) && (!(CONTENT.excludeIds like '*#7#*')) &&
(CONTENT.userType ='retailer')"%>
<pz:contentselector
id="cdocs"
ruleSet="jdbc://com.beasys.commerce.axiom.reasoning.rules.RuleSheetDefinitio
nHome/b2boost"
rule="allAnnouncements"
sortBy="startDate DESC"
query="<%=customQuery%>"
contentHome="<%=ContentHelper.DEF_DOCUMENT_MANAGER_HOME%>" />
The customQuery is constructed at runtime from user information, and
cannot
be constructed with rules
administration interface.
When I turn on debugging mode, I can see that the rule is parsed and
a SQL
query is generated, with the correct parameters.
This is the generated query (with the substitutions):
select
WLCS_DOCUMENT.ID,
WLCS_DOCUMENT.DOCUMENT_SIZE,
WLCS_DOCUMENT.VERSION,
WLCS_DOCUMENT.AUTHOR,
WLCS_DOCUMENT.CREATION_DATE,
WLCS_DOCUMENT.LOCKED_BY,
WLCS_DOCUMENT.MODIFIED_DATE,
WLCS_DOCUMENT.MODIFIED_BY,
WLCS_DOCUMENT.DESCRIPTION,
WLCS_DOCUMENT.COMMENTS,
WLCS_DOCUMENT.MIME_TYPE
FROM
WLCS_DOCUMENT
WHERE
((((WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'RessourceType'
AND WLCS_DOCUMENT_METADATA.VALUE = 'announcement'
)) OR (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'RessourceType'
AND WLCS_DOCUMENT_METADATA.VALUE = 'deal'
)) OR (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'RessourceType'
AND WLCS_DOCUMENT_METADATA.VALUE = 'new release'
)) OR (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = ''
AND WLCS_DOCUMENT_METADATA.VALUE = 'tip of the week'
)) OR (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'RessourceType'
AND WLCS_DOCUMENT_METADATA.VALUE = 'press release'
AND (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'endDate'
AND WLCS_DOCUMENT_METADATA.VALUE > '2001-10-22 15:53:14.768'
AND (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'startDate'
AND WLCS_DOCUMENT_METADATA.VALUE <= '2001-10-22 15:53:14.768'
AND ((WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'language'
AND WLCS_DOCUMENT_METADATA.VALUE = 'en'
AND ((WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'Country'
AND WLCS_DOCUMENT_METADATA.VALUE = 'nl'
)) OR (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'Country'
AND WLCS_DOCUMENT_METADATA.VALUE = '*'
AND NOT (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'excludeIds'
AND WLCS_DOCUMENT_METADATA.VALUE LIKE '%#7#%' ESCAPE '\'
AND (WLCS_DOCUMENT.ID IN (
SELECT
WLCS_DOCUMENT_METADATA.ID
FROM
WLCS_DOCUMENT_METADATA
WHERE
WLCS_DOCUMENT_METADATA.ID = WLCS_DOCUMENT.ID
AND WLCS_DOCUMENT_METADATA.NAME = 'userType'
AND WLCS_DOCUMENT_METADATA.VALUE = 'retailer'
At this moment, the server makes the user wait more than 10 min for the
query to execute.
This is what I found out about the problem:
1)When I run the query on an Oracle SQL client (We are using Oracle 8.1.7.0)
, it takes 5-10 seconds.
2)If I remove the second term of (CONTENT.Country='nl' ||
CONTENT.Country='*' ) in the custom query,
thus retricting to CONTENT.Country='nl', the performance is OK.
3)There are currently more or less 130 records in the DB that have
Country='*'
4)When I run the page on our QA server (solaris), which is at the same
time
our Oracle server,
the response time is OK, but if I run it on our development server (W2K),
response time is ridiculously long.
5)The problem happens also if I add the term (CONTENT.Country='nl' ||
CONTENT.Country='*' )
to the rule definition, and I remove this part from the custom query.
Am I missing something? Am I using the personalization server correctly?
Is this performance difference between QA and DEV due to differences
in the
OS?
Thank you,
Luis Muñiz -
Black page background flashes grey when zooming on images
When I'm previewing my book on iPad I see that when I zoom in on an image (single image gallery widget) the page background which is black flashes grey momentarily. This happens on ipad but not when I preview on the mac.
Seems like the page wants to revert to the default white background everytime I click an image widget. Any way to set a book wide black background color? I currently create the page background colour by placing a black rectangle object in the background.
Thanks anyone for any tips!It seems there's a default setting when zooming on images that fades the background from white to black (I guess Apple is presuming all pages are white)? Anyone who have pages with colour background notice this?
-
Performance problem when printing - table TSPEVJOB big size
Hi,
in a SAP ERP system there is performance problem when printing because table TSPEVJOB has many millions of entries.
This table has reached a considerable size (about 90 Gb); db size is 200 Gb.
Standard reports have been scheduled correctly and kernel of SAP ERP system is updated.
I've tried to scheduled report RSPO1041 (instead of RSPO0041) to reduce entries but it is not possible run it during normal operations because it locks the printing system.
Do you know why this table has increased ?
Are there any reports to clean this table or other methods ?
Thanks.
Maurizio ManeraDear,
Please see the Note 706478 - Preventing Basis tables from increasing considerably and
Note 195157 - Application log: Deletion of logs.
Note 1566659 - Table TSPEVJOB is filled excessively
Note 1293472 - Spool work process hangs on semaphore 43
Note 1362343 - Deadlocks in table TSP02 and TSPEVJOB
Note 996455 - Deadlocks on TSP02 or TSPEVJOB when you delete
For more information see the below link as,
http://www.sqlservercurry.com/2008/04/how-to-delete-records-from-large-table.html
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=91179
http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=83525
If any doubts Let me know.
Thomas
Edited by: thomas_raja on Aug 7, 2011 12:29 PM -
Performance problem when using CAPS LOCK piano input
Dear reader,
I'm very new to Logic and am running into a performance problem when using the CAPS LOCK-piano-keyboard for input of an instrument: when I'm not recording everything is fine and the program instantly responds on my keystrokes, but as soon as I go into record-mode there is sometimes a delay in the response-time (so I press a key and it takes up to half a second longer before the note is actually played).
Is there anything to do about this to improve performance (for example turning of certain features of the application), or should I never use the CAPS LOCK keyboard anyway and go straight for an external MIDI-keyboard?
Thanks and regards,
Tim MetzDoes your project have Audio tracks and just how heavy it is, how many tracks? Also, what kind of Software Instrument do you use?
-
Are there any performance concerns when referencing an image located in a c
Are there any performance concerns when referencing an image located in a central location (example application server)?
Hi
Should not be an issue at all - we are only going to be limited by the network bandwidth
Regards
Tim
http://blogs.oracle.com/xmlpublisher -
[svn] 3363: Fix performance problem when changing multiple DisplayObject-dependent properties .
Revision: 3363
Author: [email protected]
Date: 2008-09-25 11:58:56 -0700 (Thu, 25 Sep 2008)
Log Message:
Fix performance problem when changing multiple DisplayObject-dependent properties. The call to assignDisplayObjects() is now batched up into the next commitProperties() call.
Bugs: SDK-17033
Reviewer: Deepa
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17033
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/Group.ashello sir,
i want to your help
i was installed fresh windows 7 via cd rom and then after installed all software.
and now after 1 day customer complained me that cd rom not read any cd and i m also check when i insurt cd so its not read and when i am double click on cd rom icon its eject so what i do for that please reply on my email address.
[text removed for privacy]
VIMAL -
Performance problems when using Premiere Elements for photo slideshows
Hello,
I had been using Premiere Elements 9 (PE9) to make a simple slideshow for my parents from their vacation trip and I ran into some serious performance problems. I had used it to create similar projects before, but not nearly as big. This one is like 260 photos, so basically it is 260 seperate clips. I have a POWERHOUSE workstation (see below) so it isn't my PC. Even when PE9 crashes, looking at my performance monitor my CPU and RAM aren't even halfway being utilized. I finally switched to Windows Movie Maker of all things and it worked seemlessly, amazing really. I'm wondering if I was just using PE9 for something other than what it was designed for since there weren't really any video clips, just a ton of photos that I made into video clips, if that makes sense. Based upon my experience with this so far, I can't imagine using PE9 anymore for anything really. I might have the need for a more professional video editing program in the near future, although it does seem like PE has a lot of features. How can I make sure it utilizes my workstation to its full potential? Here are my specs:
PC
Intel Core i7-2600K 4.6 GHz Overclocked
ASUS P8P67 Deluxe Motherboard
AMD Firepro V8800 Video Card
Crucial 128 GB SATA 6Gb/s Solid State Drive (Operating System)
Corsair Vengeance 16GB (4x4GB) Memory
Corsair H60 Liquid CPU Cooler
Corsair Professional Series Gold AX850 Power Supply
Graphite Series 600T Mid-Tower Case
Western Digital Caviar Black 1 TB SATA III Hard Drive
Western Digital Caviar Black 2 TB SATA III Hard Drive
Western Digital Green 3 TB SATA III Hard Drive
Logitech Wireless Gaming Mouse G700
I don’t play any games but it’s a great productivity mouse with 13 customizable buttons
Wacom Intuos5 Pen Tablet
Yes, this system is blazingly fast. I have yet to feel it slow down, even with Photoshop, Lightroom, InDesign, Illustrator and numerous other apps running at the same time. HOWEVER, Premiere Elements 9 has crashed NUMERUOS times, every time my system wasn't even close to being fully taxed.
Monitors – All run on the ATI V8800
Dell Ultra Sharp 30 inch
Samsung 27 Inch
HAANS-G 28 Inch
Herman Miller Embody Ergonomic Chair (one of my favorite items)Andy,
There ARE some differences between PrE and PrPro w/ an approved CUDA-capable and MPE hardware acceleration-enabled nVidia video card, but those differences show up ONLY in the quality of the Scaling. The processing overhead is almost exactly the same, when it comes to handling the extra pixels.
As of PrPro CS 5, two things changed:
The max. size of Still Images went up from 4096 x 4096 pixels, to quite a bit larger (cannot recall the numbers now).
The Scaling algorithms have been improved, though ONLY with the correct nVidia cards, with MPE hardware support enabled.
Now, there CAN be another consideration, between the two programs, in that PrPro CS 5 - CS 6, are 64-bit ONLY, so one benefits from the computer and OS to run it. PrE can be either 32-bit, or 64-bit, so one might, or might not, be taking advantage of the 64-bit program and OS. Still, the processing overhead will be almost identical, it's just that the 64-bit OS can spread it around a bit.
I still recommend Scaling the large Still Images in PS, prior to Import, to keep that processing overhead as low as is possible. Scaled Still Images work just fine, and I have one Project with 3000+ Scaled Still Images, that edits just fine in PrPro, even on my older 32-bit workstation. Testing that same machine, and PrPro some years ago, I could ONLY work with up to 5 - 4096 x 4096 Stills, before things ground to a crawl.
Now, Adobe AfterEffects handles large Still Images differently, so I just moved that test Project to AE, and added another 20 large Images, which edited just fine. IIRC, AE can handle Still Images up to 10K x 10K pixels, and that might have gone up, as of CS 5.
Good luck, and hope that helps,
Hunt -
Large DB Performance problems when updating schemas
Hi,
I'm facing performance problems updating the schema of large databases in SQLServer 2008 R2 and I can't find a proper solution. I would have thought that this is a fairly common problem so here it goes.
I have a database which is about 700Gb in size. I am going to detail 2 different issues:
EXAMPLE 1: CHANGING A FIELD TYPE
In that Database I have a table with the schema detailed below as Table_TB. This table contains several million records. As you can see there is a column of type TEXT (Comment_FD). What I am trying to do is changing the column type to NVARCHAR(MAX) to
remove the deprecated TEXT type and support UNICODE characters in that field.
The command I am running is the following one:
ALTER TABLE DBA.Table_TB ALTER COLUMN Comment_FD NVARCHAR(MAX)
This operation takes several hours to complete.
I tried the following:
-Adding the new column to the same table and copying the data over
-Creating a new entire table with the new field type modified and copy the data over
-Exporting to disk the contents of the table, truncate the table and reimporting the data both with Management Studio and the bcp tool.
-When copying to a new table I made also tried removing the PK of the table to skip the overhead of creating an index.
-I also tried using a simple spd to copy the data over (to the column in the same table and the other table) in batches.
In ALL my tests I set the SQLServer Recovery model to Simple to skip as much as I can the overhead of generating logs.
No matter what I do, the times to complete this operation seem to be unusable.
Please note that I am reducing this problem to its minimum expression. Can't say precisely how long the operation takes, but a script that contain 5 field type changes identical to that one in that and other two tables takes 7 days to complete!!! The REAL problem
is that I have several other fields to which I need to change the type, and they currently amount to a total running time of 14 days!. And this is just changing a handful of fields in a handful of tables. At some point every string in the system will need
to be migrated to get unicode support, making this completely impracticable.
**Based on smaller DBs in the same system I guesstimate this table will contain about 14M records and will be about 44Gb in size.
EXAMPLE 2: ADDING COLUMNS
I have another table int the same DB, with a schema detailed below as Table_2_TB, and again several million records in it. I am trying to add a colum using the following SQL:
ALTER TABLE DBA.Table2_TB ADD strFiDatasourceName_FD VARCHAR(64) NOT NULL DEFAULT ''
This operation takes a bit more than 7 hours to complete.
**Based on smaller DBs in the same system I guesstimate this table will contain about 54M records, and a size of 98Gb.
QUESTIONS:
---->Am I doing something wrong, or is there any way to optimize either the SQL or the SQLServer configuration to speed this up?
---->Are these performance levels normal at all when dealing with databases of this size?
---->Anyone out there with experience on DBs of this size?
---->Does Microsoft offer some kind of service (cloud?) to make structural changes in large Dbs?
Thanks a lot for your help in advance!
This is the schema for the first table:
CREATE TABLE [DBA].[Table_TB](
[BranchCode_FD] [char](2) NOT NULL,
[FolderNo_FD] [int] NOT NULL,
[DateTime_FD] [datetime] NULL,
[Staff_FD] [char](3) NULL,
[Action_FD] [varchar](25) NULL,
[Comment_FD] [text] NULL,
[Team_FD] [varchar](8) NULL,
[Group_FD] [varchar](8) NULL,
[PopUpDate_FD] [smalldatetime] NULL,
[nRecordID_FD] [smallint] NOT NULL,
[nFiFoldItemID_FD] [smallint] NOT NULL,
PRIMARY KEY CLUSTERED
[BranchCode_FD] ASC,
[FolderNo_FD] ASC,
[nRecordID_FD] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, FILLFACTOR = 100) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [DBA].[Table_TB] ADD CONSTRAINT [DF__Table_TB__DateTime] DEFAULT ('1980-01-01') FOR [DateTime_FD]
GO
ALTER TABLE [DBA].[Table_TB] ADD CONSTRAINT [DF__Table_TB__PopUp__096A45D7] DEFAULT ('1980-01-01') FOR [PopUpDate_FD]
GO
ALTER TABLE [DBA].[Table_TB] ADD DEFAULT ((-1)) FOR [nFiFoldItemID_FD]
GO
This is the schema for the second table:
CREATE TABLE [DBA].[Table2_TB](
[strBBranchCode_FD] [char](2) NOT NULL,
[lFFoldNo_FD] [int] NOT NULL,
[nFiFoldItemID_FD] [smallint] NOT NULL,
[strFiType_FD] [char](3) NOT NULL,
[dtFiCreateDate_FD] [smalldatetime] NOT NULL,
[strFiBookingRef_FD] [varchar](32) NOT NULL,
[strFiBookingRefDayMonth_FD] [varchar](5) NOT NULL,
[strFiBookedVia_FD] [varchar](50) NOT NULL,
[bFiInterfaced_FD] [smallint] NOT NULL,
[nFiSortOrder_FD] [smallint] NOT NULL,
[strFiCreateStaffCode_FD] [char](3) NOT NULL,
[strPcProductCode_FD] [varchar](5) NOT NULL,
[dtFiStartDateTime_FD] [smalldatetime] NOT NULL,
[lFiFinanVendID_FD] [int] NOT NULL,
[lFiItinVendID_FD] [int] NOT NULL,
[dtFiVendBalDueDate_FD] [smalldatetime] NOT NULL,
[dtFiVendDepositDueDate_FD] [smalldatetime] NOT NULL,
[strFiStatus_FD] [varchar](2) NOT NULL,
[bFiTransFeeHasBeenApplied_FD] [smallint] NOT NULL,
[bFiATOLTypeMan_FD] [smallint] NOT NULL,
[nFiATOLType_FD] [smallint] NOT NULL,
[strCcClassCode_FD] [varchar](10) NOT NULL,
[strFiStartPointCode_FD] [varchar](5) NOT NULL,
[strFiEndPointCode_FD] [varchar](5) NOT NULL,
[strFiAirlineCode_FD] [varchar](3) NOT NULL,
[strFiVendDocNo_FD] [varchar](16) NOT NULL,
[dtFiIssueDate_FD] [smalldatetime] NOT NULL,
[strFiDiscReasonCode_FD] [varchar](3) NOT NULL,
[nFiLastFoldPricingID_FD] [smallint] NOT NULL,
[strFiPrintingNote_FD] [text] NOT NULL,
[strFiNonPrintingNote_FD] [text] NOT NULL,
[dtFiStatusExpiryDate_FD] [smalldatetime] NOT NULL,
[strFiClientFreqTravellerNo_FD] [varchar](20) NOT NULL,
[strFiRouteNo_FD] [varchar](5) NOT NULL,
[nFiNumBum_FD] [smallint] NOT NULL,
[dtFiEndDateTime_FD] [smalldatetime] NOT NULL,
[strFiFareBase_FD] [varchar](15) NOT NULL,
[strFiInterfaceItemID_FD] [varchar](15) NOT NULL,
[strFiEndPointLoc_FD] [varchar](255) NULL,
[strFiStartPointLoc_FD] [varchar](255) NULL,
[strMcMealCode_FD] [varchar](5) NOT NULL,
[strFiSeatNote_FD] [text] NOT NULL,
[strFiMealNote_FD] [text] NOT NULL,
[strFiAirCraftType_FD] [varchar](5) NOT NULL,
[strFiJourneyTime_FD] [varchar](8) NOT NULL,
[strFiCheckInMins_FD] [varchar](10) NOT NULL,
[lFiJourneyDist_FD] [int] NOT NULL,
[nFiNumStop_FD] [smallint] NOT NULL,
[strFiBaggageAllow_FD] [varchar](15) NOT NULL,
[strFiIssueStaffCode_FD] [varchar](20) NOT NULL,
[dtFiDispatchDate_FD] [smalldatetime] NOT NULL,
[strFiDispatchStaffCode_FD] [varchar](3) NOT NULL,
[strDmDispatchCode_FD] [varchar](2) NOT NULL,
[lfFiVendDepositDueAmt_FD] [decimal](17, 2) NOT NULL,
[strFiRateCode_FD] [varchar](50) NOT NULL,
[strFiRatePlan_FD] [varchar](2) NOT NULL,
[strFiCabinNo_FD] [varchar](8) NOT NULL,
[strFiMileage_FD] [varchar](10) NOT NULL,
[strFiStartPointLocTelNo_FD] [varchar](40) NULL,
[strFiBookingGuarantee_FD] [varchar](60) NOT NULL,
[strFiSpecialRemarks_FD] [varchar](250) NULL,
[strFiCxnCondition_FD] [varchar](100) NOT NULL,
[bFiFlyDrive_FD] [smallint] NOT NULL,
[strFiConfNo_FD] [varchar](32) NOT NULL,
[lFiLinkID_FD] [int] NOT NULL,
[strFiCategory_FD] [varchar](15) NOT NULL,
[nFiNumRoom_FD] [smallint] NOT NULL,
[nFiNumDay_FD] [smallint] NOT NULL,
[nFiSaleFoldItemID_FD] [smallint] NOT NULL,
[bFiRefundItem_FD] [smallint] NOT NULL,
[strFiFareSavingCode_FD] [varchar](2) NOT NULL,
[lfFiFareSavingAmt_FD] [decimal](17, 2) NOT NULL,
[strFiRateNote_FD] [text] NOT NULL,
[strFiDiscCode_FD] [varchar](20) NOT NULL,
[strFiReqDispatchMethodCode_FD] [varchar](2) NOT NULL,
[dtFiReqDispatchDateTime_FD] [smalldatetime] NOT NULL,
[nFiReqDispatchVoucherType_FD] [smallint] NOT NULL,
[nFiLastFoldItemDetailID_FD] [smallint] NOT NULL,
[nFiNumConjunction_FD] [smallint] NOT NULL,
[lfFiBSPFrgnBaseFareAmt_FD] [decimal](17, 2) NOT NULL,
[lfFiBSPBaseFareAmt_FD] [decimal](17, 2) NOT NULL,
[lfFiBSPTaxDiscrepancy_FD] [decimal](17, 2) NOT NULL,
[lfFiBSPPenaltyFeeAmt_FD] [decimal](17, 2) NOT NULL,
[nFiRegion_FD] [smallint] NOT NULL,
[strFiOpenTktNo_FD] [varchar](16) NOT NULL,
[strFiTktSource_FD] [varchar](3) NOT NULL,
[strFiJourneyType_FD] [varchar](3) NOT NULL,
[strFiTktType_FD] [varchar](3) NOT NULL,
[strFiInterfaceNameRemark_FD] [varchar](50) NULL,
[nFiATOLIssuedStatus_FD] [smallint] NOT NULL,
[strFiFareSavingFareBase_FD] [varchar](13) NOT NULL,
[strFiPaxType_FD] [varchar](3) NOT NULL,
[strFiActualCarrier_FD] [varchar](2) NOT NULL,
[strFiNetRemitType_FD] [varchar](1) NOT NULL,
[strFiFareConstruction_FD] [text] NOT NULL,
[lfFiBSPTotVATAmt_FD] [decimal](17, 2) NOT NULL,
[bFiNetFare_FD] [smallint] NOT NULL,
[strFiTourCode_FD] [varchar](50) NOT NULL,
[strFiSuppFOPInfo_FD] [varchar](255) NOT NULL,
[lfFitBSPPublishedCommPerc_FD] [decimal](12, 6) NOT NULL,
[strFiBSPFareCurrCode_FD] [varchar](3) NOT NULL,
[strFiTktIssueIataNo_FD] [varchar](8) NOT NULL,
[lfFiFareOfferedSavingAmt_FD] [decimal](17, 2) NOT NULL,
[strFiFareOfferedSavingCode_FD] [varchar](2) NOT NULL,
[strFiDesc_FD] [varchar](8000) NOT NULL,
[lfFiBSPFareBuyDiscrepancyAmt_FD] [decimal](17, 2) NOT NULL,
[bFiNoPrintOnItin_FD] [smallint] NOT NULL,
[dtFiStatusCodeChangeDateTime_FD] [smalldatetime] NOT NULL,
[bFiNoPrintIfAllPricingsZeroCustAmt_FD] [smallint] NOT NULL,
[strFiFareSavingFareBaseLow_FD] [varchar](13) NOT NULL,
[lfFiFareSavingLowAmt_FD] [decimal](17, 2) NOT NULL,
[strFiBrochureCode_FD] [varchar](8) NOT NULL,
[bFiVendPayDepositNow_FD] [smallint] NOT NULL,
[bFiVendPayBalanceNow_FD] [smallint] NOT NULL,
[strFiBankBranchCode_FD] [varchar](2) NOT NULL,
[strFiOperatingAirlineCode_FD] [varchar](2) NOT NULL,
[strFiFarePassengerTypeCode_FD] [varchar](3) NOT NULL,
[strFiAssociatedFarePricingInfoID_FD] [varchar](15) NOT NULL,
[bFiVerificationReq_FD] [smallint] NOT NULL,
[dtFiLastVerifiedDateTime_FD] [datetime] NOT NULL,
[lFiLastVerifiedLevel_FD] [int] NOT NULL,
[lFiLastVerifiedWithCount_FD] [int] NOT NULL,
[dtFiTktingStatusChangeDateTime_FD] [smalldatetime] NOT NULL,
[strFiTktingInformation_FD] [text] NOT NULL,
[strFiTktingStatus_FD] [varchar](2) NOT NULL,
[lfFiBSPFareSellDiscrepancyAmt_FD] [decimal](17, 2) NOT NULL,
[lfFiBSPTaxBuyDiscrepancyAmt_FD] [decimal](17, 2) NOT NULL,
[strFiTktingBatchID_FD] [varchar](15) NOT NULL,
[dtFiTktingBatchDateTime_FD] [smalldatetime] NOT NULL,
[lIplPolicyLevelID_FD] [int] NOT NULL,
[strFiTktingDescription_FD] [varchar](1000) NOT NULL,
[strFiTktingDataVersion_FD] [varchar](10) NOT NULL,
[strFiSourceTktingSystem_FD] [varchar](20) NOT NULL,
[strFiOthPtsPmtCode_FD] [varchar](3) NOT NULL,
[bFiManualPtsEntry_FD] [smallint] NOT NULL,
[strFiEndorsement_FD] [varchar](500) NOT NULL,
[strFiOwnedByStaffCode_FD] [char](3) NOT NULL,
[strFiThirdPartyTrackingID_FD] [varchar](25) NOT NULL,
[strFiAdditionalPrintingNote_FD] [text] NULL,
[bFiOverridePrintingNote_FD] [smallint] NOT NULL,
[lfFiCarbonOffsetWeightAmt_FD] [decimal](17, 2) NOT NULL,
[strFiCancellationPolicyNote_FD] [text] NULL,
[bFiPEProcessed_FD] [smallint] NOT NULL,
[bFiActingAsAgentFor_FD] [smallint] NOT NULL,
[nFiOriginalBuyingBasis_FD] [smallint] NOT NULL,
[bFiIsOpenSegment_FD] [smallint] NOT NULL,
[nFiCreateSource_FD] [smallint] NOT NULL,
[strFiBookingSourceInvoiceNo_FD] [varchar](7) NOT NULL,
[strFiGDSPaxTypeCode_FD] [varchar](8) NOT NULL,
[strFiNetFareGDSAccountCode_FD] [varchar](8) NOT NULL,
[strFiPOSID_FD] [varchar](50) NOT NULL,
[bFiIsPOSEditable_FD] [smallint] NOT NULL,
[lfFiCustExchRate_FD] [decimal](16, 8) NOT NULL,
[lfFiCustFareSavingLowAmt_FD] [decimal](17, 2) NOT NULL,
[lfFiCustFareSavingAmt_FD] [decimal](17, 2) NOT NULL,
[lfFiCustFareOfferedSavingAmt_FD] [decimal](17, 2) NOT NULL,
[bFiCCItemPayableToBranch_FD] [smallint] NOT NULL,
[dtFiExternalAccountingDate_FD] [smalldatetime] NOT NULL,
[strFiSourceSystemBookResponseText_FD] [text] NOT NULL,
[bFiIsConnection_FD] [smallint] NOT NULL,
[bFiIsPEFoldLevelItem_FD] [smallint] NOT NULL,
[nFiReqdEndorsedConjTktType_FD] [smallint] NOT NULL,
[bFiEndorsedConjTktDetailIsManual_FD] [smallint] NOT NULL,
[strFiReqdEndorsedConjTktDetailText_FD] [varchar](30) NOT NULL,
[lFiLastTktingTemplateID_FD] [int] NOT NULL,
[dtFiBookedDate_FD] [smalldatetime] NOT NULL,
[strFiTktingVerificationWarning_FD] [varchar](1000) NOT NULL,
[strFiTktingVerificationError_FD] [varchar](1000) NOT NULL,
[strFiTktingError_FD] [varchar](1000) NOT NULL,
[strFiCustomerAccountingData00_FD] [varchar](50) NOT NULL,
[strFiCustomerAccountingData01_FD] [varchar](50) NOT NULL,
[strFiCustomerAccountingData02_FD] [varchar](50) NOT NULL,
[strFiCustomerAccountingData03_FD] [varchar](50) NOT NULL,
[strFiCustomerAccountingData04_FD] [varchar](50) NOT NULL,
[strFiCustomerAccountingData05_FD] [varchar](50) NOT NULL,
[strFiCustomerAccountingData06_FD] [varchar](50) NOT NULL,
[strFiCustomerAccountingData07_FD] [varchar](50) NOT NULL,
[strFiCustomerAccountingData08_FD] [varchar](50) NOT NULL,
[strFiCustomerAccountingData09_FD] [varchar](50) NOT NULL,
[strFiCustomerAccountingDataNote_FD] [varchar](100) NOT NULL,
[strFiCustomerAccountingData10_FD] [varchar](50) NOT NULL,
[strFiCustomerAccountingData11_FD] [varchar](50) NOT NULL,
[strFiCustomerAccountingData12_FD] [varchar](50) NOT NULL,
[strFiCustomerAccountingData13_FD] [varchar](50) NOT NULL,
[strFiCustomerAccountingData14_FD] [varchar](50) NOT NULL,
[strFiCustomerAccountingData15_FD] [varchar](50) NOT NULL,
[strFiCustomerAccountingData16_FD] [varchar](50) NOT NULL,
[strFiCustomerAccountingData17_FD] [varchar](50) NOT NULL,
[strFiCustomerAccountingData18_FD] [varchar](50) NOT NULL,
[strFiCustomerAccountingData19_FD] [varchar](50) NOT NULL,
[nFiFlightBasis_FD] [smallint] NOT NULL,
[lFiStartPointVendID_FD] [int] NOT NULL,
[lFiEndPointVendID_FD] [int] NOT NULL,
[lCtID_FD] [int] NOT NULL,
[strFiContractCode_FD] [varchar](25) NOT NULL,
[strFiContractPeriodCode_FD] [varchar](50) NOT NULL,
PRIMARY KEY CLUSTERED
[strBBranchCode_FD] ASC,
[lFFoldNo_FD] ASC,
[nFiFoldItemID_FD] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON, FILLFACTOR = 100) ON [PRIMARY]
) ON [PRIMARY] TEXTIMAGE_ON [PRIMARY]
GO
ALTER TABLE [DBA].[Table2_TB] WITH NOCHECK ADD FOREIGN KEY([nFiReqDispatchVoucherType_FD])
REFERENCES [DBA].[VoucherTypes_TB] ([nVtCode_FD])
GO
ALTER TABLE [DBA].[Table2_TB] WITH NOCHECK ADD FOREIGN KEY([strPcProductCode_FD], [strFiType_FD])
REFERENCES [DBA].[ProductCodes_TB] ([ProductCode_FD], [Type_FD])
GO
ALTER TABLE [DBA].[Table2_TB] WITH NOCHECK ADD FOREIGN KEY([strBBranchCode_FD], [lFFoldNo_FD])
REFERENCES [DBA].[Folder_TB] ([BranchCode_FD], [FolderNo_FD])
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strBB__44AB0736] DEFAULT ('') FOR [strBBranchCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__lFFol__459F2B6F] DEFAULT (0) FOR [lFFoldNo_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__nFiFo__46934FA8] DEFAULT ((-1)) FOR [nFiFoldItemID_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__478773E1] DEFAULT ('') FOR [strFiType_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__dtFiC__487B981A] DEFAULT ('1980-01-01') FOR [dtFiCreateDate_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_TB__strFiBookingRef] DEFAULT ('') FOR [strFiBookingRef_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__4A63E08C] DEFAULT ('') FOR [strFiBookingRefDayMonth_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_TB__strFiBookedVia_FD] DEFAULT ('') FOR [strFiBookedVia_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__bFiIn__4C4C28FE] DEFAULT (0) FOR [bFiInterfaced_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__nFiSo__4D404D37] DEFAULT ((-1)) FOR [nFiSortOrder_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__4E347170] DEFAULT ('') FOR [strFiCreateStaffCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_TB__strPcProductCode] DEFAULT ('') FOR [strPcProductCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__dtFiS__501CB9E2] DEFAULT ('1980-01-01') FOR [dtFiStartDateTime_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__lFiFi__5110DE1B] DEFAULT ((-1)) FOR [lFiFinanVendID_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__lFiIt__52050254] DEFAULT ((-1)) FOR [lFiItinVendID_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__dtFiV__52F9268D] DEFAULT ('1980-01-01') FOR [dtFiVendBalDueDate_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__dtFiV__53ED4AC6] DEFAULT ('1980-01-01') FOR [dtFiVendDepositDueDate_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__54E16EFF] DEFAULT ('') FOR [strFiStatus_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__bFiTr__55D59338] DEFAULT (0) FOR [bFiTransFeeHasBeenApplied_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__bFiAT__56C9B771] DEFAULT (0) FOR [bFiATOLTypeMan_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__nFiAT__57BDDBAA] DEFAULT (0) FOR [nFiATOLType_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strCc__58B1FFE3] DEFAULT ('') FOR [strCcClassCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_TB__strFiStartPointCode] DEFAULT ('') FOR [strFiStartPointCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_TB__strFiEndPointCode] DEFAULT ('') FOR [strFiEndPointCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__5B8E6C8E] DEFAULT ('') FOR [strFiAirlineCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__5C8290C7] DEFAULT ('') FOR [strFiVendDocNo_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__dtFiI__5D76B500] DEFAULT ('1980-01-01') FOR [dtFiIssueDate_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__5E6AD939] DEFAULT ('') FOR [strFiDiscReasonCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__nFiLa__5F5EFD72] DEFAULT ((-1)) FOR [nFiLastFoldPricingID_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__605321AB] DEFAULT ('') FOR [strFiPrintingNote_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__614745E4] DEFAULT ('') FOR [strFiNonPrintingNote_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__dtFiS__623B6A1D] DEFAULT ('1980-01-01') FOR [dtFiStatusExpiryDate_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__632F8E56] DEFAULT ('') FOR [strFiClientFreqTravellerNo_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__6423B28F] DEFAULT ('') FOR [strFiRouteNo_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_TB__nFiNumBum] DEFAULT ((-1)) FOR [nFiNumBum_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__dtFiE__660BFB01] DEFAULT ('1980-01-01') FOR [dtFiEndDateTime_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__67001F3A] DEFAULT ('') FOR [strFiFareBase_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__67F44373] DEFAULT ('') FOR [strFiInterfaceItemID_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__68E867AC] DEFAULT ('') FOR [strFiEndPointLoc_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__69DC8BE5] DEFAULT ('') FOR [strFiStartPointLoc_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strMc__6AD0B01E] DEFAULT ('') FOR [strMcMealCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__6BC4D457] DEFAULT ('') FOR [strFiSeatNote_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__6CB8F890] DEFAULT ('') FOR [strFiMealNote_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__6DAD1CC9] DEFAULT ('') FOR [strFiAirCraftType_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__6EA14102] DEFAULT ('') FOR [strFiJourneyTime_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__6F95653B] DEFAULT ('') FOR [strFiCheckInMins_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__lFiJo__70898974] DEFAULT (0) FOR [lFiJourneyDist_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__nFiNu__717DADAD] DEFAULT (0) FOR [nFiNumStop_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__7271D1E6] DEFAULT ('') FOR [strFiBaggageAllow_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__7365F61F] DEFAULT ('') FOR [strFiIssueStaffCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__dtFiD__745A1A58] DEFAULT ('1980-01-01') FOR [dtFiDispatchDate_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__754E3E91] DEFAULT ('') FOR [strFiDispatchStaffCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strDm__764262CA] DEFAULT ('') FOR [strDmDispatchCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__lfFiV__77368703] DEFAULT (0) FOR [lfFiVendDepositDueAmt_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__782AAB3C] DEFAULT ('') FOR [strFiRateCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__791ECF75] DEFAULT ('') FOR [strFiRatePlan_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__7A12F3AE] DEFAULT ('') FOR [strFiCabinNo_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__7B0717E7] DEFAULT ('') FOR [strFiMileage_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__7BFB3C20] DEFAULT ('') FOR [strFiStartPointLocTelNo_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__7CEF6059] DEFAULT ('') FOR [strFiBookingGuarantee_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__7DE38492] DEFAULT ('') FOR [strFiSpecialRemarks_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__7ED7A8CB] DEFAULT ('') FOR [strFiCxnCondition_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__bFiFl__7FCBCD04] DEFAULT (0) FOR [bFiFlyDrive_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__00BFF13D] DEFAULT ('') FOR [strFiConfNo_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__lFiLi__01B41576] DEFAULT ((-1)) FOR [lFiLinkID_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__02A839AF] DEFAULT ('') FOR [strFiCategory_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__nFiNu__039C5DE8] DEFAULT (0) FOR [nFiNumRoom_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__nFiNu__04908221] DEFAULT (0) FOR [nFiNumDay_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__nFiSa__0584A65A] DEFAULT ((-1)) FOR [nFiSaleFoldItemID_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__bFiRe__0678CA93] DEFAULT (0) FOR [bFiRefundItem_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__076CEECC] DEFAULT ('') FOR [strFiFareSavingCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__lfFiF__08611305] DEFAULT (0) FOR [lfFiFareSavingAmt_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__0955373E] DEFAULT ('') FOR [strFiRateNote_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__0A495B77] DEFAULT ('') FOR [strFiDiscCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__0B3D7FB0] DEFAULT ('') FOR [strFiReqDispatchMethodCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__dtFiR__0C31A3E9] DEFAULT ('1980-01-01') FOR [dtFiReqDispatchDateTime_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__nFiRe__0D25C822] DEFAULT (0) FOR [nFiReqDispatchVoucherType_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__nFiLa__0F0E1094] DEFAULT ((-1)) FOR [nFiLastFoldItemDetailID_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__nFiNu__100234CD] DEFAULT (0) FOR [nFiNumConjunction_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__lfFiB__10F65906] DEFAULT (0) FOR [lfFiBSPFrgnBaseFareAmt_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__lfFiB__11EA7D3F] DEFAULT (0) FOR [lfFiBSPBaseFareAmt_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__lfFiB__12DEA178] DEFAULT (0) FOR [lfFiBSPTaxDiscrepancy_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__lfFiB__13D2C5B1] DEFAULT (0) FOR [lfFiBSPPenaltyFeeAmt_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__bFiDo__14C6E9EA] DEFAULT (0) FOR [nFiRegion_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__15BB0E23] DEFAULT ('') FOR [strFiOpenTktNo_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__16AF325C] DEFAULT ('') FOR [strFiTktSource_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__17A35695] DEFAULT ('') FOR [strFiJourneyType_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__18977ACE] DEFAULT ('') FOR [strFiTktType_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__198B9F07] DEFAULT ('') FOR [strFiInterfaceNameRemark_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__nFiAT__1A7FC340] DEFAULT ((-1)) FOR [nFiATOLIssuedStatus_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__1B73E779] DEFAULT ('') FOR [strFiFareSavingFareBase_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__1C680BB2] DEFAULT ('') FOR [strFiPaxType_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__1D5C2FEB] DEFAULT ('') FOR [strFiActualCarrier_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__1E505424] DEFAULT ('') FOR [strFiNetRemitType_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__1F44785D] DEFAULT ('') FOR [strFiFareConstruction_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__lfFiB__20389C96] DEFAULT (0) FOR [lfFiBSPTotVATAmt_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__bFiNe__212CC0CF] DEFAULT (0) FOR [bFiNetFare_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__2220E508] DEFAULT ('') FOR [strFiTourCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__23150941] DEFAULT ('') FOR [strFiSuppFOPInfo_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__lfFit__24092D7A] DEFAULT (0) FOR [lfFitBSPPublishedCommPerc_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__24FD51B3] DEFAULT ('') FOR [strFiBSPFareCurrCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__25F175EC] DEFAULT ('') FOR [strFiTktIssueIataNo_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__lfFiF__27D9BE5E] DEFAULT (0) FOR [lfFiFareOfferedSavingAmt_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD CONSTRAINT [DF__Table2_T__strFi__251D4D44] DEFAULT ('') FOR [strFiFareOfferedSavingCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiDesc_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT (0) FOR [lfFiBSPFareBuyDiscrepancyAmt_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT (0) FOR [bFiNoPrintOnItin_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('1980-1-1') FOR [dtFiStatusCodeChangeDateTime_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT (0) FOR [bFiNoPrintIfAllPricingsZeroCustAmt_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiFareSavingFareBaseLow_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT (0) FOR [lfFiFareSavingLowAmt_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiBrochureCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT (0) FOR [bFiVendPayDepositNow_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT (0) FOR [bFiVendPayBalanceNow_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiBankBranchCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiOperatingAirlineCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiFarePassengerTypeCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiAssociatedFarePricingInfoID_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT (0) FOR [bFiVerificationReq_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('1980-01-01') FOR [dtFiLastVerifiedDateTime_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT (0) FOR [lFiLastVerifiedLevel_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT (0) FOR [lFiLastVerifiedWithCount_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('1980-01-01') FOR [dtFiTktingStatusChangeDateTime_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiTktingInformation_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiTktingStatus_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT (0) FOR [lfFiBSPFareSellDiscrepancyAmt_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT (0) FOR [lfFiBSPTaxBuyDiscrepancyAmt_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiTktingBatchID_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('1980-01-01') FOR [dtFiTktingBatchDateTime_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ((-1)) FOR [lIplPolicyLevelID_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiTktingDescription_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiTktingDataVersion_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiSourceTktingSystem_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiOthPtsPmtCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT (0) FOR [bFiManualPtsEntry_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiEndorsement_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiOwnedByStaffCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiThirdPartyTrackingID_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiAdditionalPrintingNote_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT (0) FOR [bFiOverridePrintingNote_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT (0) FOR [lfFiCarbonOffsetWeightAmt_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiCancellationPolicyNote_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT (0) FOR [bFiPEProcessed_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT (0) FOR [bFiActingAsAgentFor_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT (0) FOR [nFiOriginalBuyingBasis_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT (0) FOR [bFiIsOpenSegment_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT (0) FOR [nFiCreateSource_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT (' ') FOR [strFiBookingSourceInvoiceNo_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiGDSPaxTypeCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiNetFareGDSAccountCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiPOSID_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT (0) FOR [bFiIsPOSEditable_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ((0)) FOR [lfFiCustExchRate_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ((0)) FOR [lfFiCustFareSavingLowAmt_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ((0)) FOR [lfFiCustFareSavingAmt_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ((0)) FOR [lfFiCustFareOfferedSavingAmt_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ((0)) FOR [bFiCCItemPayableToBranch_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('1980-01-01') FOR [dtFiExternalAccountingDate_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiSourceSystemBookResponseText_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ((0)) FOR [bFiIsConnection_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ((0)) FOR [bFiIsPEFoldLevelItem_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ((0)) FOR [nFiReqdEndorsedConjTktType_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ((0)) FOR [bFiEndorsedConjTktDetailIsManual_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiReqdEndorsedConjTktDetailText_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ((-1)) FOR [lFiLastTktingTemplateID_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('1980-01-01') FOR [dtFiBookedDate_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiTktingVerificationWarning_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiTktingVerificationError_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiTktingError_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiCustomerAccountingData00_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiCustomerAccountingData01_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiCustomerAccountingData02_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiCustomerAccountingData03_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiCustomerAccountingData04_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiCustomerAccountingData05_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiCustomerAccountingData06_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiCustomerAccountingData07_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiCustomerAccountingData08_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiCustomerAccountingData09_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiCustomerAccountingDataNote_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiCustomerAccountingData10_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiCustomerAccountingData11_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiCustomerAccountingData12_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiCustomerAccountingData13_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiCustomerAccountingData14_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiCustomerAccountingData15_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiCustomerAccountingData16_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiCustomerAccountingData17_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiCustomerAccountingData18_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiCustomerAccountingData19_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ((0)) FOR [nFiFlightBasis_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ((-1)) FOR [lFiStartPointVendID_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ((-1)) FOR [lFiEndPointVendID_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ((-1)) FOR [lCtID_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiContractCode_FD]
GO
ALTER TABLE [DBA].[Table2_TB] ADD DEFAULT ('') FOR [strFiContractPeriodCode_FD]
GOHi,
I just wanted to summarize the conclusions we got here, in case it helps someone else.
For the case of the ALTER statement:
First we analyzed the query performance and found out that the query was I/O bound. A handful of useful scripts can be found on the links below. Some high values on PAGEIOLATCH wait times suggested some memory pressure, so we incremented the amount of memory
dedicated to the server up to 32GB. This single change was one of the most effective ones and reduced the query execution time by about 40%-50%. I guess SQLServer needs less paging to perform the operation when it can load more pages in memory at the same
time.
We run more tests tweaking some other mentioned variables like the server maxDOP, which made in fact the query slower the higher the value we set. The initial server config was set with auto CPU affinity, but I/O mask affinity set to the first 4 CPUs, and
we found out that setting it to ALL AUTO perform faster for some reason.
After some analysis made by Microsoft on the diagnostics/metrics data, the only interesting finding was that a couple of the storage volumes were performing slightly slower than the rest causing a bit of a bottleneck. We recommended the customer to look
into it with their storage team, but even with those fixed, we won't expect the query to run much faster.
No other tweaks have been found useful to speed up the ALTER statement. Basically it comes up to how fast you I/O subsystem is, and how much can SQLServer can cache in memory. No other suggestion has been made by Microsoft, and they've advised that any
other tweaked query (split the column addition and the constraints for example) is going to perform worse than the plain and simple alter statement.
On the NVARCHAR type problem:
As it was suggested by Erland Sommarskog, SQLServer 2014 Enterprise edition performed this operation about 40% faster than SQLServer 2008 R2 with the same hardware specs.
At the moment upgrading the customer infrastructure is not an option for us, so we don't have a proper solution to accomplish this in a workable time frame on SQLServer 2008.
The strategy that we found might be the best option was the one suggessted by E. Sommarskog, bind our code for reading access to a COALESCED calculated column, and writing on the new converted NVARCHAR column. Schedule a batch job in the backgroud
to migrate all the data over time to the new column, and finally remove the old column.
Thanks a lot everyone for your help.
David.
Useful links:
http://www.sqlskills.com/blogs/paul/wait-statistics-or-please-tell-me-where-it-hurts/
http://msdn.microsoft.com/en-us/library/ms189768.aspx
http://rusanu.com/2014/02/24/how-to-analyse-sql-server-performance/ -
Performance problems when running PostgreSQL on ZFS and tomcat
Hi all,
I need help with some analysis and problem solution related to the below case.
The long story:
I'm running into some massive performance problems on two 8-way HP ProLiant DL385 G5 severs with 14 GB ram and a ZFS storage pool in raidz configuration. The servers are running Solaris 10 x86 10/09.
The configuration between the two is pretty much the same and the problem therefore seems generic for the setup.
Within a non-global zone Im running a tomcat application (an institutional repository) connecting via localhost to a Postgresql database (the OS provided version). The processor load is typically not very high as seen below:
NPROC USERNAME SWAP RSS MEMORY TIME CPU
49 postgres 749M 669M 4,7% 7:14:38 13%
1 jboss 2519M 2536M 18% 50:36:40 5,9%We are not 100% sure why we run into performance problems, but when it happens we experience that the application slows down and swaps out (according to below). When it settles everything seems to turn back to normal. When the problem is acute the application is totally unresponsive.
NPROC USERNAME SWAP RSS MEMORY TIME CPU
1 jboss 3104M 913M 6,4% 0:22:48 0,1%
#sar -g 5 5
SunOS vbn-back 5.10 Generic_142901-03 i86pc 05/28/2010
07:49:08 pgout/s ppgout/s pgfree/s pgscan/s %ufs_ipf
07:49:13 27.67 316.01 318.58 14854.15 0.00
07:49:18 61.58 664.75 668.51 43377.43 0.00
07:49:23 122.02 1214.09 1222.22 32618.65 0.00
07:49:28 121.19 1052.28 1065.94 5000.59 0.00
07:49:33 54.37 572.82 583.33 2553.77 0.00
Average 77.34 763.71 771.43 19680.67 0.00Making more memory available to tomcat seemed to worsen the problem or at least didnt prove to have any positive effect.
My suspicion is currently focused on PostgreSQL. Turning off fsync boosted performance and made the problem less often to appear.
An unofficial performance evaluation on the database with vacuum analyze took 19 minutes on the server and only 1 minute on a desktop pc. This is horrific when taking the hardware into consideration.
The short story:
Im trying different steps but running out of ideas. Weve read that the database block size and file system block size should match. PostgreSQL is 8 Kb and ZFS is 128 Kb. I didnt find much information on the matter so if any can help please recommend how to make this change
Any other recommendations and ideas we could follow? We know from other installations that the above setup runs without a single problem on Linux on much smaller hardware without specific tuning. What makes Solaris in this configuration so darn slow?
Any help appreciated and I will try to provide additional information on request if needed
Thanks in advance,
Kasperraidz isnt a good match for databases. Databases tend to require good write performance for which mirroring works better.
Adding a pair of SSD's as a ZIL would probably also help, but chances are its not an option for you..
You can change the record size by "zfs set recordsize=8k <dataset>"
It will only take effect for newly written data. Not existing data. -
White border problem when zooming with SWF in PDF
Hi Everyone,
I have posted my original querry in the Indesign forum:
http://forums.adobe.com/message/5176893#5176893
I'm having problems with zooming whedn trying to create a PDF with SWF inserted.. at certain levels of zoom I get a white border on the left and right of the document which squashes the content into the middle and makes it a little pixelated. I also get a thin white border on the right when zooming out. Does anyone have any ideas where I might be going wrong?
Thanks,
EmNot wishing to be rude, but that workflow is not supposed to be used that way.
InDesign's ability to export SWFs is intended for showing the file in a Web page, and Acrobat's ability to embed SWFs is only intended for small annotations placed within the pages of a conventional PDF file. By placing the entire Layout as a SWF you are in effect playing the entire thing as a movie in Flash Player - all the advantages of the PDF format are completely lost, there is no vector-rendering of any content or text, and users will find it very hard to understand what's going on (the navigation buttons in Acrobat or Reader will not work, text is not searchable or accessible, multiple pages cannot be printed, etc.).
It's not entirely trivial to do this 'correctly', as at the moment we don't have full support in the PDF standard for all the interactive features that InDesign can apply to page objects - that's why they are grouped into PDF and non-PDF in the various selection menus in InDesign. Rather than saving as a SWF you should be using Export to Interactive PDF, and ensuring that the various interactive items and media are all selected on the export dialog.
Basic stuff such as links and video will export just fine that way, and the PDF will preserve everything else in the Layout as native text or graphics so it'll look fine, navigate properly and be searchable. Animations and buttons will not work as expected, so you may have to revise their behavior if PDF is your intended output destination. -
Performance problem when creating XML-file
Hi,
I want to create a XML-file with customer data from an internal table. This internal table has appr. 62000 entries. It takes hours to create the elements of the file.
This is the coding I have used:
loop at it_debtor.
at first.
Creating a ixml factory
l_ixml = cl_ixml=>create( ).
Creating the dom object model
l_document = l_ixml->create_document( ).
Fill root node
l_element_argdeb = l_document->create_simple_element(name = 'argDebtors'
parent = l_document ).
endat.
Create element 'debtor' as child of 'argdeb'
l_element_debtor = l_document->create_simple_element(
name = 'debtor'
parent = l_element_argdeb ).
Create elements as child of 'debtor'
l_value = it_debtor-admid.
perform create_element using 'financialAdministrationId'.
l_value = it_debtor-kunnr.
perform create_element using 'financialDebtorId'.
l_value = it_debtor-name1.
21 child elements in total are created
endloop.
Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
Connect internal XML table to stream factory
l_ostream = l_streamfactory->create_ostream_itable( table =
l_xml_table ).
Rendering the document
l_renderer = l_ixml->create_renderer( ostream = l_ostream
document = l_document ).
l_rc = l_renderer->render( ).
open dataset p_path for output in binary mode.
if sy-subrc eq 0.
loop at l_xml_table into rec.
transfer rec to p_path.
endloop.
close dataset p_path.
if sy-subrc eq 0.
write:/ wa_lines, 'records have been processed'.
endif.
else.
write:/ p_path, 'can not be opened.'.
endif.
form create_element using p_text.
check not l_value is initial.
l_element_dummy = l_document->create_simple_element(
name = p_text
value = l_value
parent = l_element_debtor ).
endform. " create_element
Please can anyone tell me how to improve the performance.
The method create_simple_element takes a long time.
SAP release : 46C
Regard,
ChristineHi Christine!
There might be several reasons - but you have to look at the living patient, not only the dead coding.
You did not show any selects, loop at ... where or read table statements -> the usual slow parts are not included (or visible...).
Of course the method-calls can contain slow statements, but you can also have problems because of size (when internal memory gets swaped to disc).
Make a runtime analysis (SE30), have a look in SM50 (details!) for the size, maybe add an info-message for every 1000-customer (-> will be logged in job-log), so you will see if all 1000-packs are executed in same runtime.
With this tools you have to search for the slow parts:
- general out of memory problems, maybe because of to much buffering (visible by slower execution at the end)
- slow methods / selects / other components by SM30 -> have a closer look
Maybe a simple solution: make three portions with 20000 entries each and just copy the files into one, if necessary.
Regards,
Christian -
I've been playing with the cs6 beta for a few days (mostly ACR) and today I started working on photoshop proper to retouch an image I took, when I zoom to 100% all I get is artifacts and repeating patterns like its not displaying the image correctly. If I zoom in even further it justs zooms on the pattern it had. If I zoom out to 50% I see my image as if nothing has happened
mmm haven't had any problems with my vid card until this last driver update, still I'm in xp and my comp is a little old. Anyways I was asking if anyone else has the same problem and if there was another solution than to just update my vid card drivers...
-
Performance problems when filtering and excluding hierarchy node
Dear all,
I setup a query with a hierarchy linked to it, where I use a "hard-filtered" exclusion on this hierarchy for a specific node AND a variable which the users can use for flexible filtering purposes.
When I execute the query, the runtime of this query is unimaginable high and I really doubt, whether the underlying SQL-Statement is executed (or generated) correctly. Before I start tracing everything I want to know, whether you encountered some similar problems with such kind of selection and de-selection in a query?!
Thanks,
AndreasHi Andreas,
I had read in one of the performance Docs that,
"Inclusion gives better performance than exclusions.."
Never tried it but you can check if there is any performance improvement by including the nodes you need rather than excluding the one you don`t need..
Let me know..
Ashish -
Problems when selecting an image from a scanned document... please help
I scan student work and I want to make comments. I want to copy a portion of the student work from the scanned PDF. I use preview and select a portion of the PDF. When I paste the selection into pages the entire PDF is put into pages. If I paste into text edit, I only get the selection. This problem does not occur in Pages 09 but I can't afford it. Any suggestions?
r,
Try this workflow:
Open the PDF in Preview and use the Selection Tool in Preview to highlight the portion that you want to excerpt.
Edit > Copy.
File > New from Clipboard.
Save.
Drag new file into Pages.
Using this method you will not lose any resolution as you may when you do a screen capture.
Jerry
Maybe you are looking for
-
Unable to edit user properties in SBS Console (2011)
Hello, When attempting to edit properties for a user in the SBS Console, I receive the following error: "Attempted to perform an unauthorized operation." This only occurs when attempting to edit the user account properties for this single user. I un
-
I am feeling so ripped off right now. I have wanted a Mac for years and believed the hype about it's stability and I have had more trouble with this Imac 2011 than I have ever had with a pc. It locks up with several software products from APP store.
-
Performance problem with MERGE statement
Version : 11.1.0.7.0 I have an insert statement like following which is taking less than 2 secs to complete and inserts around 4000 rows: INSERT INTO sch.tab1 (c1,c2,c3) SELECT c1,c2,c3 FROM sch1.tab1@dblink WHERE c1 IN (SELECT c1 FROM
-
Get the form module version using JDAPI program
Hi I have one problem to find the verison of form module using java (JDAPI) programming. To the JDAPI program i am just passing the form name. by reading the form it has to say the form version. Is there any method to get this... Thanks in advance. M
-
Can't remove deleted, hidden files
Transferred large picture folder (1.6 tbyte) to new 4 tb external thunderbolt drive (2 by 2 tb, Raid 0) on new late 2013 macbook pro running Mavericks. Deleted this file, and emptied trash, and then used Lightroom to more correctly transfer this 1.6