Repaired cfp-421 relay boards not working in a cfp-2000 System - power light off

Hi, we are using a cfp-2000 as a control system for various biology related experiments and prototypes.
The first configuration was controlling valves & pumps. I recently took that configuration apart after it had been sitting unused for a while and started to re-configure for a different application to control lights. I had trouble right off the bat, couldn't talk to the cfp-2000 controller. I sent it in for repair\replace and then went through a little work to re-setup in MAX. I got the IP connection working and I can turn on\off the leds on the cfp-2000.
Then I found that the three cfp-421 relay boards were not working. So I sent them in for repair. They came back but when I add them to the Remote System in MAX, I can't communicate with them. There is a message indicating that they are not connected (I don't have the exact wording but can get it if that will help). The Ready indicator is on at the cfp-421 modules but the Power indicator is off. I tried all three returned modules individually with no luck.
Any help is appreciated. We have spent quite a lot of money on repairs and have fallen behind on the project.
Thank you. Kevin

Thanks for responding.
MAX version 3.1.0.3021
Fieldpoint drivers 5.02
The messages are "The module or item addressed does not exist" and "The device is offline. Make sure the device is connected and its power is on".
If I reset the cfp-2000, all relays activate on the cfp-421 (the eight indicator lamps light) for a few seconds and then go off.
I wonder if something is broken in the backplane because the cfp-421
power light is off.

Similar Messages

HT3529 My ios 7 update has made my message key board not work ?

After updating to IOS 7 update. It has made my key board not work very well when typing a message.

Perform a "hard reset" on the device by pressing down and holding the home button and the sleep/wake button for up to 30secs. until you see a black screen with the Apple logo, then release.
Then test to see if it solved the problem.

I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. Help

I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. has anyone used this devive (AV360) on there own 27" thunderbolt display (not the imac) and gotten it to work? If so I'd appreciate the help.

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

Have just down loaded Yosemite over Mountain Lion, Indesign CS5 does not work ( Am dependant on it) although Bridge , Light Room and Elements operate OK How do I solve this rapidly. Can any one help on this issue. Thanks

Sorry to say it, but I think you can see from Bob's response that there's no way to solve this rapidly.
Did you take an image of your Mountain Lion install before upgrading to Yosemite? Roll back to that. If you're not in the habit of taking a snapshot of your system before performing operating system upgrades - get in that habit. If you are dependent on anything at all on hour computer, having a reliable backup method in place is essential. If you don't have a Time Capsule, or some other way to run Time Machine onto a disk that's not in your computer, go set that up yesterday.
If you can't just remove Yosemite and roll back to Mountain Lion for whatever reason, you can partition your drive so that you can install both Yosemite and Mountain Lion on the same drive, and then boot into Mountain Lion when you need to work in CS5. Or you can take your Mountain Lion disc (I assume you have one, no?) and then use it to create a virtual machine in something like VirtualBox to run Mountain Lion from inside Yosemite.

HT4623 My iPhone is locked with the connect to iTunes logo on screen. I have connected and trying to restore but it is not working. I have turned it on and off but to no avail.

This has happened doing the latest software update. I think I accidentally deleted iTunes before doing the latest update in trying to make room on the phone when it came up with limited space.
My iPhone is locked with the connect to iTunes logo on screen. I have connected and trying to restore but it is not working. I have turned it on and off but to no avail.
The restore says two hours to down load. Has anyone else had this problem.

iOS: Unable to update or restore

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

I am having trouble with my iPad, i can start it, but the iPad does not work. i tried to use the power and home button at the same time, the apple logo appears, but the iPad does not work. What am I suppose to do?

After the Apple logo appears, what happens then? Can you hear any sounds or if you tap on the screen, does it seem like apps can open or are you just seeing a black screen? You might have a hardware problem, but you can try restoring the software and see what happens.
Read this in its entirety before you do anything. Make sure you read the sections at the end about using recovery mode.
iTunes: Restoring iOS software - Support - Apple

Adobe Flash will not update to a W-2000 system and will not work? Is there a fix? Mozilla has disabled Flash. Do I have to go back to Explore?

Adobe Flash will not update to a W-2000 system and will not work in Firefox? Is there a fix? Mozilla has disabled Flash. Do I have to go back to Explore?

have you tried to install flash
restart imac
go to web site which require flash

The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

The program vectorworks 2008 (not 2009) does not work with the new operating system Mavericks, which is a disaster because it forces us to change the program, and is very expensive. Apple should fix this problem

Why should Apple fix the problem? Maybe you should consider NOT upgrading if an expensive piece of (obsolete) software you're running won't work with it...

My camera does not work after I restored the system, how can I use it again?

My camera does not work after I restored the system, how can I use it again?
Thank you for your help!

Did try to restore "as new device" without using the backup after that?
Did you try to reset the phone by holding the sleep and home button until the Apple logo coes back again?

Yesterday my iPod touch's home button would not work and to day it is completely turned off and wont turn back on and it is fully charged and when i connect it to itoons it dosent reckinise it

yesterday my iPod touch's home button would not work and to day it is completely turned off and wont turn back on and it is fully charged and when i connect it to itoons it dosent reckinise it

Given the information supplied, it sounds very similar to what happened to my wife's 4. Locked up...came back on with a blank (bluish) screen...could here emails and text coming through. It would get very hot as well. Our local apple store tried two times to rescue it, ultimately rendering it complete inoperable. I'm sorry to say in our case we had to buy a refurb and trade in the phone for $150, which actually wasn't a bad deal.
There could be other information I'm missing, but I would start with seeing if apple can restore your phone. If they can't, then I'm pretty sure it's dead.

Time machine corrupted sparsebundle? how to repair? time machine restore not working

On my macbook pro, after starting with Cmd-R, I erased the hard disk, re-installed Mavericks and I want to restore my back up with Time Machine. I select the NAS where the backup is, it sees the backup file but it says: "There is a problem with this backup and it can't be restored". I also copied the backup file (with extension sparsebundle) to another external hard disk and tried to use it from there but I have the same problem. With my iMac (as the laptop is not usable since I started it with cmd-R), when I double click on the backup file (ext sparsebundle), it mounts and I can actually see and access the files that are there. I do not understand why the restore is not working with the Time Machine. It seems the sparsebundle is corrupted. I tried these instructions: http://www.garth.org/archives/2011,08,27,169,fix-time-machine-sparsebundle-nas-b ased-backup-errors.html
But I am stuck at this step: tail -f /var/log/fsck_hfs.log
iMac-6:~ root# tail -f /var/log/fsck_hfs.log
/dev/rdisk3s2: ** Checking Journaled HFS Plus volume.
/dev/rdisk3s2: ** Detected a case-sensitive volume.
/dev/rdisk3s2: The volume name is Time Machine Backups
/dev/rdisk3s2: ** Checking extents overflow file.
/dev/rdisk3s2: ** Checking catalog file.
/dev/rdisk3s2: Invalid key length
/dev/rdisk3s2: (4, 57529)
/dev/rdisk3s2: ** The volume Time Machine Backups could not be verified completely.
Nothing seems to happen even after a few hours (like 3 hours). The sparsebundle bakcup file is about 200 GB big. It does not seem to do anything as I do not notice any disk activity.
Could someone please advise how to do the restore with the Time Machine or how I can repair the backup file?

Well, if Time Machine is the only thing on that hard drive and there is only one partition, sooner or later, Time Machine will fill up the entire thing and you can't use it for anything else.
Now, you can start over, but that will mean that your Time machine backups will be wiped out. If that is what you want, it is a rather easy process easily accomplished in Disk Utility:
With hard drive connected, open Disk Utility (Applications -> Utilities). Highlight the Time Machine hard drive (the top entry for it). Click on the Partition tab. In the window, pick 2 partitions under the "volume scheme" and then slide the little thing at the bottom to adjust the size of each partition. Make sure the format is Mac OS Extended (Journaled) and, under options, click the GUID partition scheme. Name each one (i.e. "Time Machine" and "backups") and click "apply". Disk Utility will first erase the drive and then create 2 partitions (2 totally separate drives so to speak). You're done.....
You can then set up the one for Time Machine and the other to drag over whatever files you want.

Key board not working with hp 2000, window 8

I have a hp 2000 lap top tablet with windows 8. The key board stop working. First it was the numbers, then letters. I just bought a wireless key board just so I could research the problem. Any ideas?

It sounds like the laptop keyboard cable may be loose or your laptop keyboard may need to be replaced. If an external keyboard is working just fine, it should mean that the motherboard is just fine.
If the laptop is still under warranty, I would contact HP, they should fix it for you. They will not want you trying to fix it yourself (at least without them knowing about it) without voiding your warranty.
Otherwise, you may need to find someone that can take care of it for you. If you feel comfortable doing so, you can find keyboards on Ebay for less than $20 usually and tutorials that will walk you through the whole process of replacing it. Of all the parts to replace on a laptop, the keyboard is generally one of the easiest to fix, but I would research it out a little before attempting.

I HAVE EARLIER PREPARED WINDOWS REPAIR DISC, NOW IT DOES NOT WORK

140525
I HAVE WINDOWS 7 ULTIMATE VERSION- 32 BIT
I HAVE EARLIER PREPARED MANY " WINDOWS REPAIR DISC" FROM TIME TO TIME AS A PROTECTION ON THIS VERY LAPTOP AND OS.
NOW IT DOES NOT WORK AND GIVE ERROR CODE -- 0XC00AA0301.
I TRIED SEVERAL TIMES AND WASTED QUITE A FEW DVD'S.
CAN YOU GUIDE?
REPLY ON [email protected]
HOPE TO RECEIVE HELP.
GJDMBH

Once downloaded the Window7 setup you then want to download the windows free burning app from the same thread.
Also visit the Microsoft website link below as has basic guidance that may help you.
http://www.microsoftstore.com/store/msusa/html/pbPage.Help_Win7_usbdvd_dwnTool
Basically with the Windows free burning app you can make either a USB boot stick media of windows 7 or a good older fashioned DVD boot media. Just follow instructions & see how you go, if get stuck come back to this thread & post details on your issue - hopefully myself or other members will be able assist you further if needed.
Like my post? Click Kudos (thumb+) to show appreciation.

Key Board not working on Compact CQ60-420US Laptop

One day the key board and touch pad was working and the next day it would not work. I tried a restore to a day that I know it was working to no avail. I have a Compact CQ60-420US laptop. This laptop is not moved around as it just sits on the desk all the time. Any thoughts anyone?
Thanks,
Papa Derr
This question was solved.
View Solution.

You can try the following steps:
1. Please remove all external devices from the computer, remove the battery and the AC Adapter. After that, hold down the power button for 10 seconds. Reconnect, restart and check for functionality.
2. Go to BIOS and check if the Arrow keys are working. This will isolate any issues with the Operating System.
3. Try using an external Keyboard and Mouse. This will help us determine if the issue is with the computer hardware or the Operating System.
Regards,
Deka
**I work for HP.**Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give a quick thanks.

Hibernate not working on my MacBook Pro - it just turns off

Ive had this machine for 2 years, and it has NEVER managed to hibernate.
The battery runs for about an hour, then at about 20% left it just shuts down the machine, losing all my work. I have looked everywhere for an option to change this, but cant find one.
Its driving me mad - I have lost so much work its not funny. Now I carry the power supply everywhere, and can never use the battery. I want my Dell back!
I am shocked to learn that some other people dosn't have this problem, when the machine powers off when the battery runs out, and they power it back on when recharging, they get the same state as before the machine shut itself down. WOW!
I did this:
pmset -g | grep hibernatemode
And got this:
hibernatemode 3
Which seems correct.
Also, I hardly ever suspend the machine by shutting the lid either - many times when I open the lid after, the screen is blank, but everything else is still working. no about of prodding will get the screen to work again, and I have to hold down the power button to reboot. I think the problem is if it gets woken up while the book is still closed it goes into headless mode, and there is no way to get out of it.
The macs sleep handling is much worse than XP, and that was pretty bad.
Ideas?
Simon.

hobbss,
When I do the terminal thing (aka grep hibernate) I too get those results. Have you tried reseting the SMC. The System Management Controller is an integrated circuit (computer chip) that is on the logic board of the computer. As the name implies, it is responsible for power management of the computer. It controls backlighting, hard disk spin down, sleep and wake, some charging aspects, trackpad control, and some input/output as it relates to the computer sleeping.
Over time, the settings in the System Management Controller may become unusable, which can result in operational anomalies with the computer. Examples include not turning on, not waking from sleep, not charging the battery, or not recognizing the AC Adapter, among others.
1. If the computer is on, turn it off.
2. Disconnect the AC adapter and remove the computer's battery.
3. Press and hold the power button for 5 seconds and then release the button.
4. Reconnect the battery and AC Adapter.
5. Press the power button to restart the computer
Supporting KB article: http://support.apple.com/kb/HT1411
Hope that helps,
Weston

Repaired cfp-421 relay boards not working in a cfp-2000 System - power light off

Similar Messages

Maybe you are looking for