Repaired ipod still not working, failure code 117

My 5th Generation iPod has been freezing for the passed few months so about a month ago, I sent it in for repair. The iPod came back with a letter saying that there was nothing wrong with it. The AppleCare had expired before I got it back from Apple and when I received it, it was still freezing frequently. I have reset and restored it numerous times before sending it in and after I got it back. When I try turning it on, all I get is an Apple on the screen. I googled this issue and I found something saying that I should try holding menu and center and then menu and previous to get it to go into diagnostics. When I run the automatic diagnostics, I get a message saying:
"Failure code: 117 with 14 fails"
The site I was reading doesn't actually say what the error codes mean. Do you guys have any suggestions.

My 5th Generation iPod has been freezing for the passed few months so about a month ago, I sent it in for repair. The iPod came back with a letter saying that there was nothing wrong with it. The AppleCare had expired before I got it back from Apple and when I received it, it was still freezing frequently. I have reset and restored it numerous times before sending it in and after I got it back. When I try turning it on, all I get is an Apple on the screen. I googled this issue and I found something saying that I should try holding menu and center and then menu and previous to get it to go into diagnostics. When I run the automatic diagnostics, I get a message saying:
"Failure code: 117 with 14 fails"
The site I was reading doesn't actually say what the error codes mean. Do you guys have any suggestions.

Similar Messages

  • Replacement iPod - Still Not Working

    Last week I sent my 30GB to Apple for service (after having it only a month) and I recieved my replacement yesterday, but I'm still having issues.
    When I first got it home, it hooked up to iTunes and my laptop just fine, but then it stopped transferring songs and I got errors and I had to restore it.
    Since I restored it last, I cannot get it connected to the computer properly. iTunes does not recognize it and when I hook it up to the installer, it says "Initializing..." and just sits there forever, doing nothing. A few times it's told me to restart the computer, which I've done, and then it went back to the "Initializing..." I also tried it in data mode, and still nothing. I have tried uninstalling and reinstalling iTunes and the iPod updater (both the 2006-03-23 update and the old 2006-01-10) and I have been all over the website and I have tried ALL of Apple's suggestions. I tried hooking it up to another computer - a desktop - and it wouldn't work there, either, which leads me to believe that it's the iPod and not the computer.
    It's bad enough that I had to get a month-old iPod replaced, but now the new one won't work, either. I'm very frustrated. Anyone have any suggestions?? I'm about to just send it back to Apple again....
    HP   Windows XP   30GB White

    Nevermind...
    I finally called customer service and the guy was very helpful but nothing he had me do worked, so I'm sending it to Apple... AGAIN!
    I'm my third iPod doesn't work either, I will be very upset. Hopefully the third time will be the charm.

  • The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk. Have tried disk utility to repair but still not working.

    My time machine backup has failed for the last couple of days. Im getting the message saying," error.  this may be temporary, if the problem persists, go to disc utility to repair the problem."
    I have done the first aid in the disc utility  and still not repaired. Do I erase the disc, as it says????

    1. Reboot the TC alone.. Just pull out the power cord.. count to 10 and plug it back in.
    If TM still cannot find the disk..
    2. Do a full network reboot.. everything off.. restart in correct order.. modem.. wait 2min.. TC wait 2min.. then all the clients..
    If TM still cannot find the disk..
    3. Factory reset the TC and do a fresh configuration. The TC is known to occasionally throw a wobbly and spontaneously forget its name.. part of old age.. (2years is starting towards old age for a TC).
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    If TM still cannot find the disk..
    4. Wipe the old backup.. and start afresh.. this sometimes also happens.
    You can try a verify of the disk. See A5 here.
    http://pondini.org/TM/Troubleshooting.html
    Sometimes a clean fresh TM backup is the only way.
    Good luck.

  • Ipod still not working

    Hi. I asked a question earlier because my Ipod is not responding. I restored it and when it said prossesing data or something like that I clicked devises and then I think I stopped the prossesing data thing. My ipod still will not turn on. Im very frustrated and it took 2 hours to restore. My waranty is still good. If I do get another Ipod from this website, do I have to pay for it since I have a waranty? Do I need to take my Ipod to the Apple store? Thanks for your help.
    Ipod Touch, 4g, 8gb, 9 months old

    As long as it's a legit site and you didn't get it from someone on eBay, you can take it to the apple store, but you may have to prove where you got the product from. I bought my phone from orange website, but I got it replaced in the apple store, so you should be good on that, but just phone the company you bought it from and ask them about it first, they may replace or advise you to go to apple. Good luck.

  • New iPod still not working

    I went to the Apple store and they gave me a new iPod which worked for a little until it stopped connecting to iTunes. The message says "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software."
    I uninstalled iTunes but now when I try to install iTunes an error message comes up. What do I do now?

    Try to uninstall the iPod Updater and iTunes using the add/removal software, then download the latest iTunes and iPod updater from apple.com. Install both of them, then open ipod updater, wait and until you are asked to plug your iPod with the computer, then connect it and click Restore.

  • IPOD STILL NOT WORKING EVEN AFTER SERVICE

    Hi,
    I can't belive this. I sent my ipod off for service because my ipod had a problem with its battery. The ipod would cut off when the indicator showed 1/2 full this happened about an hour into play. Yes the battery life was only about an hour.
    So when i got it back I was so glad but I've just been using it and the problem still persists. I have tried the battery test and the ipod fails this test.
    I cannot understand why apple has sent me my ipod back unchanged. I paid £180 for my first generation mini and at the moment it is almost useless as I have to constantly charge the battery up.
    Can anyone give me some advise??? Thank You For Your Time

    Did you get an email adress or phone numer for someone to complain too? I got 2 ipods. One broke sometime ago and we go a replacment and now both of them are broken. (Its not my PC, I use a Sony MP3 and it works fine). It is the lack of customer service that is bugging me. I have been trying to call Apple or an Apple store for days. Totally rubbish. My daughter threw her ipod out today!!! If you get a UK phone number or amail address please let me know. Cheers

  • I have restored my ipod nano 2nd generation but its still not working

    i have reset my ipod and restored it but it is still not working. i have connected to itunes and it has loaded some music onto it but though the light comes on you cannot see anything else on the screen. any suggestions would be appreciated

    It might be a good idea to let the iPod's battery fully drain. Then charge it back up and restore it once more in iTunes.
    Otherwise, it's likely a hardware issue with the iPod's LCD display, meaning you'll need to take or send your iPod in for service either via Apple or a third party repair service. Here is Apple's repair pricing.
    http://www.apple.com/support/ipod/service/prices/
    Note that they don't actually repair the device, but exchange it for one of the same generation, model, and capacity.  A third party service will actually replace the damage part for a little less.  Google "iPod screen repair" and you should get a number of results to work with.
    B-rock

  • I downloaded the pokemon yellow version app for my ipod touch more than a month ago and it is still not working.  It has not worked for anybody who bought it.  How can I get my money back?

    I downloaded the pokemon yellow version app for my ipod touch more than a month ago and it is still not working.  It has not worked for anybody who bought it. Why is it off of the app store now and how do I get my money back?

    That message is usually due to a bad cable.
    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    If you can’t charge your iPhone, iPad, or iPod touch
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    or send it in to Apple. See:     
    Service Answer Center - iPod

  • HT2693 I bought an itunes gift card but when i try to redeem my account it says invalid code. I put in the code perfectly but its still not working. The shop wont take it back either, What should i do?

    I need help, i bought an itunes gift card but when i try to redeem my account it says invalid code. I even checked the code and i had it 100% right but its still not working. The shop in which i bought it wont take it back so i dont know what to do. Please help.

    iTunes Store: Invalid, inactive, or illegible codes

  • My ipod touch 4th gen home button has stopped working i have taken of the screen and tried pushing the button underneath and still not working please help

    my ipod touch 4th gen home button has stopped working i have taken of the screen and tried pushing the button underneath and still not working please help

    Try a reset:
    Hold the Sleep and Home button down until you see the Apple logo.

  • I am trying ot install my cs6 online. it says that my code has been redeemed but i took it off of one of my laptops to download it onto this one. it is still not working. please help

    I am trying ot install my cs6 online. it says that my code has been redeemed but i took it off of one of my laptops to download it onto this one. it is still not working. please help

    Find your serial number quickly
    Download CS6 products
    Activation & Deactivation Help
    Mylenium

  • Since installing Yosemite and Photos I can now no longer drag and drop a photo in an email, as I have always done. I repaired permission and restarted a number of times. still not working... Help?! Thanks, Michael

    Since installing Yosemite and Photos I can now no longer drag and drop a photo in an email, as I have always done. I repaired permission and restarted a number of times. still not working... Help?! Thanks, Michael

    What happens if you use the Share button and select Mail?
    What happens when you try? I had to hold there photo there for a short period before it would load.

  • When connecting my ipod nano (5 gen) I get an error messege saying that it was recognized but not properly. Ive tried everything the support site says and it still not working. What do I do now?

    When connecting my ipod nano (5th gen) I get an error messege saying that it was recognized but not propperly. I treid everything that the support site said to do but it still not working. What do I do no?

    This came from another thread, but worked for me.  Problem is with newest iTunes 4.62.  Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update).  Reboot, and reinstall iTunes.  It will reinstall all the other ones and you should be able to connect your nano.  Good luck.

  • My iPod nano 6G stop working suddenly; After i reset it and even afetr put it in "stand by" mode by accessing deagnostic mode, it is still not working; Now i can access it sometimes (the main screen), but is not playing and is too slow. How can i fix it

    My iPod nano 6G stop working suddenly; After i reset it and even afetr put it in "stand by" mode by accessing deagnostic mode, it is still not working; Now i can access it sometimes (the main screen), but is not playing and is too slow. How can i fix it

    If you do not find a solution in the iPod nano (6th generation) - User Guide, suggest that you call AppleCare if still under warranty or take a trip to your local Apple Store or AASP.

  • Left side touch note working - took back up with PC companions - repaired with SUS - restore of contacts etc failed - restore error - touch still not working ..... Experts can i get some help ?

    Hi Guys / Experts / Arnab,
    The left side touch of my phone screen was not working. Was not able to type numbers 1, 2 and alphabets Q, W etc.
    I repaired with SUS after taking back up with PC companion.
    While restoring the backup, i got RESTORE ERROR, and almost everything got restore except few apps and CONTACTS, which is the most important thing in a mobile .
    ---> TOUCH IS STILL NOT WORKING <----
    Guys can i expect some help here ?
    Regards,
    Sush
    Solved!
    Go to Solution.

    I see
    this might help
    http://talk.sonymobile.com/message/448070#448070
    https://github.com/nelenkov/android-backup-extractor
    SO HERE IS HOW YOU CAN RESTORE YOUR DATA:
    Get your Fullbackupdata-Contactfile.
    1.  First go to your backupfile: (C:\Users\YourUserName\Documents\Sony\Sony PC Companion\SomeNameDependsOnLanguage\
    2. Make a Copy of your backup-File (crtl+c, crtl+v)
    3. We want to change the file extension, so make sure you see it. If you don't see a .dbk at the end of your file, go in the explorer window in the left upper corner on organise -> Folder and search options. Change to view and then deselect "Hide extensions for known File types"
    4. Rename (F2) the file to backup.zip
    5. Open the zip with 7zip or something similar.
    6. Navigate to Applications\com.sonyericsson.android.contactsimport and get the fullbackupdata file which is lying in this folder.
    7. Put this file on your Desktop.
    8.Download this jar-File: http://ge.tt/64TJmne/v/0?c
    9. Put the .jarFile also on your desktop.
    10. Doubleclick the .jar-File. After a few seconds a new file with the name "restore.tar" should show up (If not check if your fullbackupdata-File really has the name "fullbackupdata" and is on the desktop)
    11. Open the .tarfile with 7Zip
    12. Navigate to restore.tar\apps\com.sonyericsson.android.contactsimport\f\
    13. Copy full_backup_vcard.vcf to the Desktop.
    If everything worked you're finished, you can open this .vcf File via Windows-contacts -> import or put it directly on your phone and import it there (open Contacts. Settingsbutton -> impot)
    If you don't trust my .jar file, you can also download the github-project follow their orders and compile it yourself.
    Don't forget to mark the Correct Answers & Helpful Answers
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Maybe you are looking for

  • Can you share to other users on the same machine?

    If I have 2 users on the same machine, and I log in with one user, open iTunes, then swich user and bring up iTunes. Will the second user see the shared shongs from the first user? Thanks, Alfredo

  • Add a Transparent Container dynamically in wddomodifyview

    Hi All, I have added UI Elements to views before. Now, I am trying to add a Transparent Container to a Group, which does not work. I am using the same procedure as I have used it for other UI Elements before, but I keep receiving the dump: The follow

  • How to use Dynamic date calculation in some transactions.

    Hello everyone. I have to create some dynamic variants using the dynamic date calculation. The problem is that in some transactions it´s not possible to use some variables that can round a value. For example: in transaction /SAPAPO/MC90, I need to fi

  • Report 10g R 2 layout issue

    Hi Friend, i moved an rep into the server and all report layout format in the whole application changes. All reports layout in our testing environment is messed up. Please help.

  • Problems with OWA_COOKIE send and get

    Hi all, I have a problem with OWA_COOKIE-package. What I'm trying to do is to integrate Oracle eBS and an APEX app. The application resides on different databases and servers. I'm basing my code on this white paper: http://www.oracle.com/technology/p