Repairing AME - dos command info required

dos command info required
Repairing AME which got damaged in CS3 after installing CS4
"Failed to initialise error".
Repair advice was to run (from the Command Prompt) the following. WMEncodingHelper.exe/regserver
It is found in C:\Program Files\Adobe\Adobe Premiere CS3\
I can get to the directory line and see the .exe file but I do not remember how to run it !
Help please.

>I kind of like an indicator that acknowledges something is happening.
Agreed! Much as I love Firefox, I hate it's lack of a splash screen. Every single program on the planet that has a GUI should have as it's very first action when started to show a small splash screen, just so the user knows the command to start has been accepted. This action should be set to High Priority, interrupting all other actions such as virus scans, other programs closing, downloads, file copies, etc. Once the Splash loads, the rest of the start-up process can return to Normal priority and load in it's proper OS managed sequence.
I can't tell you how many times I've accidentally ended up with three or four browser windows open because there's no indication that anything is happening.

Similar Messages

Arp / Dos command format output

Hi
Im looking to run the arp command within powershell and format the output so I only see the mac addresses
Ive been trying for a while and gotten as far as arp -A | sort-object "Physical Address"
alternatively is the a powershell equivelent of arp? Ive tried Get-Macaddress but tht dosent work.
Generally how do I choose which column info I want from a dos command?
Anyone?
Thanks for reading
confuseis

THis works.
arp -a | %{$($_[24..41])-join ''} | select -skip 3
I can paste these mac address to nirsofts Macaddressview and that resolves all the mac addresses to the manufacturers.
Then is simply pick out all the printers. Hurrah
Thanks
confuseis
If you're searching for printers, you can run
nmap -p 9100 -sT 192.168.1.1-254 -T2
or use page countster: http://www.laptechnologies.com/printers dot exe.
I personally prefer page countster, but I increase the timeout, otherwise some printers will be missed as they don't reply before the timeout. Run it as an admin as it require raw sockets.

How to run multiple DOS commands from a single Webutil Client_Host session?

Hello all,
I have a requirement where I need to create an interface with SVN from Forms for basic checkin-checkout of files.
So, I've been trying to use webutil client_host to open a command line session and issue svn commands.
For svn, sometimes I need to give multiple commands like change to a particular directory and then run an svn command.
But client_host takes in only one command at a time and I'm unable to issue a series of DOS commands to perform
a particular task.
Is there a way to do this?
Pls suggest.
Regards,
Sam

First your original question... You can put more than one DOS command on a single line, simply separate each command with an ampersand (&). For example:
mkdir c:\abc & cd abc & dir*
Regarding your concerns about performance, well that would depend on exactly what you mean. Using CLIENT_HOST (or HOST on the server) simply opens a shell (DOS in this case) then passes your command to it. The performance of performing this action really isn't measurable. Basically you are just pressing a button and you should get a near immediate action. As for the performance of executing each command, that has nothing to do with Forms. Once the command is passed to the shell, the rest is a function of the shell and whatever command you passed.
Having said that, if you were to write something sloppy like a loop (in pl/sql) which called CLIENT_HOST lots of times repeatedly, then yes there would be a performance problem because the pushing of the button will cause an exchange to and from the server and each cycle in the loop will do the same.
So the answer to how performance is impacted will depend on what exactly you need to accomplish. If it is a single call to CLIENT_HOST, this should be fine.

How to run stored procedure in DOS command line????

Hi,
I want to run a stored procedure in DOS command line?
(My_Stored_Procedure is the stored procedure that I want to run )
This is what I did in DOS prompt
C:\>sqlplus scott/tiger exec lMy_Stored_Procedure <Return>
Obviously it is NOT working. Please send me the correct way to fix this.
Thanks so much in advance for helping.
Cuong

Billy Verreynne wrote:
BluShadow wrote:
True Billy, but even Windows hasn't completely got away from using the "DOS" word...Yeah - the command line/shell environment is based on that of the old DOS command interpreter. But Microsoft does not make the mistake of call it DOS.
In fact, with earlier versions of Windows NT, a 16bit DOS real-mode virtual machine was supported. This was very kewl.
Running a large BBS with multiple nodes back then required a DOS machine per node, an IPX network, and a Novell file server.Novell Netwars. ;)
Ahhhh! good old DOS... so many good programs written at that low level, outside the Windoze environment.Yeah.. cut my teeth on writing code for DOS. Still have all my old BIOS and assembler manuals for it. Wrote my own screen s/w (write to a buffer and then move it into the video buffer, instead of writing char wise to the video buffer via interrupts), mucking about with my own concurrent threading model (using very simplistic cooperative multitasking) and so on. Heck, wrote tons of s/w on DOS... :-)Yeah I've still got a copy of my old machine code programs for writing to buffers and screen memory switching for smooth animation. Run them nowadays and they run like sh!t off a shovel. And all my old coursework including writing an interpreted language and multi-window (dos based windows) editor, parser and the code to execute the language and display the output. Oooo, and so much other stuff.
Awesome back then as you got really intimate with the o/s and hardware. This is sorely lacking today in environments like Java. And I think the reason why so much code written today is less than optimal - to put it kindly.Exactly. Started for me on the Sinclair zx81 (writing Basic), then the Sinclair Spectrum (Basic and Assembly), then Sinclair QL (yes I really had one!) and then the BBC Master 128K (where I got to writing my own rom filing system and creating my own eproms, to integrate with the word processor for additional printing features etc. as well as storing games on rom for speedy loading - and I still have it and it still works!)
It's that level of working with the underlying memory and assembly language that gives you the understanding of how values are passed between code using the stack and registers, and how memory allocation and referencing is done etc. As you say... it's missed in a lot of todays teaching, which just seems too high level and misses the basic concepts of things such as datatypes and why they are different. I bet half the modern programmers wouldn't have a clue how to do multiplication or division of binary numbers using the carry flag.

How can i make the results of dos command print to text area in a gui????

I need to get the results from a command line application to print in a text area located in a gui... i have the following code written, which should run the command... if run from a dos window, the command prints the list of what's in a jar file to the screen.... i want that info that is printed to go in a text area which i have named textBox which is global to the program.. i know textBox.appends() is what i should use but how do i retrieve the info from the dos window to put in the appends method?
The code is below for the method..
Thanks,
DH
     /*     Runs the DOS Command for listing a JAR File     */
     public void jarList ( ) // Needs To Be Fixed!!
          listFieldText = listField.getText();
          String command;
          command = "jar tf " + listFieldText;
          System.out.println(command);
          Runtime rt = Runtime.getRuntime();
          try
               Process child = rt.exec(command);
               child.waitFor();
               System.out.println("Process exit code is: " + child.exitValue());
          catch(IOException e)
               System.err.println("IOException starting process!");
          catch(InterruptedException e)
               System.err.println("Interrupted waiting for process!");
}

Replace child.waitFor()with:          BufferedReader br=new BufferedReader(new InputStreamReader(child.getInputStream()));
          String s="";
                while((s=br.readLine())!=null) {
                    textbox.append(s);
                }Mark

Abobe 9: Printing a PDF file using a DOS command

I have Adobe 9.4.0 on a server and would like to print PDF files using a DOS command. The DOS command we are using is:
start Acrord32.exe /T/S/h/O "C:\BO_Archival_Code_Deployment\Print\TINF018_C.pdf" "Lexmark T644 PS3 - 10.192.36.126"
With this, we are able to print only page 1 of the PDF file. The other pages remain unprinted. This means there is no issue related to printer configuration, firewalls, etc.
Other observations:
1) When we print the file manually after opening it in Adobe 9.4.0, all pages are printed.
2) We found that the above command provides different results with Adobe 8.2.6 i.e. with the DOS command, all pages are printed while using Adobe 8.
We are trying to automate some tasks for which we require the PDF files to be printed automatically through a DOS command. We are being advised to use Adobe 9 as technical support for Adobe 8 is likely to be withdrawn soon.
Please can you help.

Sorry. This is a forum for Adobe Connect issues not PDF issues. Please locate the correct forum so your question can be addressed properly there.

DOS Command Schtasks - error

Hello,
I am locally executing a batch file which contains the following:
SchTasks /query /fo csv > C:\AllReports\Schedtask.txt /v /s AppServer.xyz.org
I do get the ouptut file along with the requested info but I also get the following:
ERROR: The task XML contains a value which is incorrectly formatted or out of range
ERROR: Task cannot be loaded: UpsizeToSQL - Special Run - is the first line withing the output file. Subsequent lines show actual Schtasks results
Appserver.xyz.org is a remote server I am able to access to using my network credentials. I am able to run Schtasks from the command line without issues and get a results clean of error messages. The issue appears when I execute the batch file from my local
machine to retrieve tasks on that remote server.
Any help to find a solution would be much appreciated.
Thank you.

Hello,
I locally executing a batch file which contains the following:
SchTasks /query /fo csv > C:\AllReports\Schedtask.txt /v /s AppServer.xyz.org
I do get the ouptut file along with the requested info but I also get the following:
ERROR: The task XML contains a value which is incorrectly formatted or out of range
ERROR: Task cannot be loaded: UpsizeToSQL - Special Run - is the first line withing the output file. Subsequent lines show actual Schtasks results
Appserver.xyz.org is a remote server I am able to access to using my network credentials. I am able to run Schtasks from the command line without issues and get a results clean of error messages. The issue appears when I execute the batch file from my local
machine to retrieve tasks on that remote server.
Any help to find a solution would be much appreciated.
Thank you.
Hi,
Since this issue is mainly related to Dos Commands, I would recommend you refer to the following thread to get where to get supports for this issue.
Where is the Forum for DOS Commands
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

DOS Commands Used in Java Pgm, but command window should NOT be visible!

Need a solution for the following.
Problem: In a Java program, DOS Commands are used.
Hence while executing it, the command window is visible for few seconds and later it is hided i.e once the processing of that DOS Command is finished.
Solution Required: The Command Window should not be visible. The DOS Commands should be performed in the background with out making the command window visible.

Problem:
I am trying to run a executable file through java . But a command window always pops up. I want the command window not to pop up while the code is executed. Alternatively the rt.exec method should run in the background till the process is complete.
I am using the following code in Java Swing application , where in when a user clicks a button the following method is invoked , which is turns invokes a windows a rasdial.exe file .Ex: rasdial MyConnection;
Can someone help me on this. The below is a snippet of my code .
public void callSerialOrInfraExe(String exeName) {
executableFile = exeName;
Runtime rt = null;
Process process = null;
boolean checkCon = false;
try {
rt = Runtime.getRuntime();
process = rt.exec("rasdial " + executableFile);
process.waitFor();
checkCon = checkConEstablish();
if (checkCon) {
lblMsg.setVisible(true);
cmdSubmit.setText("Done");
cmdSubmit.setMnemonic('D');
rdbSerialPort.setVisible(false);
rdbInfraredPort.setVisible(false);
jLabel1.setText(msgStr.toString());

Is it possible to call ms-dos command in abap program?

Hi,
is it possible to call ms-dos command in abap program?
Thanks.

Hi Cemil,
You probably have your answer here:
[Re: DOS/Windows command in app server;
You create your external command with SM69 (you can test it with SM49).
Then you call this command with function module "SXPG_COMMAND_EXECUTE".
(See function group SXPT for all the calls to external commands).
Regards,
Thomas

Is there a way to run dos commands on onther system?

Hi I have connected to a port of another system where windows is the operating system. So can I run dos commands on the other system through that network connection from my computer?

I'm not sure what you mean by "connected to a port of another system" . Which port using what software to which server?

I used my bank card to get gold on a game for my boyfriend and now it won't let me download games to my iPod it keeps coming up billing info required what do I do?

I used my bank card to get gold on a game for my boyfriend and now it won't let me download games to my iPod it keeps coming up billing info required what do I do?

You need to add a valid payment method to the account. An iTunes gift card can be added.

Execute DOS command in current window!

All:
Here is my code :
import java.io.*;
public class BuildScript {
public static void main ( String[] args ) {
String[] command = {"C:\\winnt\\system32\\cmd.exe", "cls"};
try {
Process process = Runtime.getRuntime().exec ( command );
process.waitFor();
} catch ( InterruptedException e ) {
e.printStackTrace();
System.exit(-1);
} catch ( IOException e ) {
e.printStackTrace();
System.exit(-1);
System.out.println ( "DONE!" );
I just want to exeute some simple DOS command from Java application. And then I run this code, it hangs there for ever. I comments out "process.waitFor()", then it print out the "DONE" however it seems that it just open another console and clear that one and exit. For the main console I start my code, nothing happened.
Can anyone help me out how to execute the dos command in current console window.
Thanks

Can anyone help me out how to execute the dos command in current console window.Sorry to say but there is no way to do that.
The best way to clear the screen is to print a few hundred newlines.
Trust me, this is a frequently asked question.

Is it possible to run dos-command's in java?

I have a small security problem. I have a dos-based java prog. with login at the start og the program, but I have problems hiding the password. I have managed to hide the password when it is typed, but when you press enter and get to the next menu, it is only to press the up-key, and dos recover the last typed sentence. (The password...) I have been able to fine the dos-command "doskey /reinstall", which will clear the memory, but I haven't been able to implemet this in my java-prog.
Any tips/trics are appreciated.

I have a small security problem. I have a dos-based
java prog. with login at the start og the program, but
I have problems hiding the password. I have managed to
hide the password when it is typed, but when you press
enter and get to the next menu, it is only to press
the up-key, and dos recover the last typed sentence.
(The password...) I have been able to fine the
dos-command "doskey /reinstall", which will clear the
memory, but I haven't been able to implemet this in my
java-prog.
I doubt that calling that in your program would help.
doskey is specific to the process. Running it by any means in java means that a new process will exist. You can verify this by open two console windows and running doskey in both. Nothing that you do in one will be reflected in the other.
I don't think your problem is a program problem. That means that it should not be solved by software but rather by management. For example you certainly wouldn't expect your program to make sure that someone wasn't standing behind the user when they typed their password right? And what if someone installs a key grabber on the computer? In that case any program, yours included, would have all the key presses logged to a file.
Alternatively if you might be able to solve it with one of the following...
- Recode the application to use a GUI. If there is no console the doskey isn't going to get anything.
- Write some JNI that bypasses the java input handling. If you handle the input directly then you can turn off echo
- Inspect the java source code for the VM. There might be a hidden method to turn echo off. Alternatively you can find the code responsible for this, modify them, and use them with the bootclass option to replace the ones in the VM. This solution is not distributable. And it might not be possible solely using java.

How to execute dos command in Java program?

In Perl, it has System(command) to call dos command.
Does java have this thing?
or any other way to execute dos command in java program?
Because i must call javacto compile a file when the user inputed a java file name.

Look in the Runtime class, it is implemented using the Singleton design pattern so you have to use the static method getRuntime to get its only instance, on that instance you can invoke methods like
exec(String command) that will execute that command in a dos shell.
Regards,
Gerrit.

How to execute DOS command in Java?

I want to execute a dos command in Java,such as execute test.bat command? How to realize it?
Thanks in advance!

http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html
I found this article really useful in solving this. Hope it helps.
Cheers,
John

Repairing AME - dos command info required

Similar Messages

Maybe you are looking for