Repairing BootCamp 3.1 to install 3.2 update in Win7
If need be,I apologize in advance for posting this question pulled from a previous post of mine, but I think it's a standalone matter.
I recently installed Win7 on a dedicated BootCamp drive. Was having problems w/my apple keyboard F-keys, specifically volume and brightness controls which worked fine w/my previous XP install.
I'm currently running 3.1.10 32-bit BC and want to upgrade to 3.2 BC.
I've downloaded the 3.2 32-bit BC update but it wouldn't install because ofthe following 2- errors:
Service KeyAgent (KeyAgent) failed to start.
I then pressed "ignore" and got:
Service MacHAL (MacHALDriver) failed to start.
Any advice on correcting, or working around these errors so that I can install the 3.2 BC update?
Are you running an early model Mac Pro (1,1)?
Win 64 is not officially supported by Apple on these. I managed to get the drivers installed by unpacking them, and individually installing the individual pieces.
Later updates let me install over these without trouble.
Similar Messages
-
1) Could not start up os x
2) Only could start bootcamp
3) Tried resetting nvram
4) Could not start even in bootcamp
5) Verify disk says …. Verifying volume “Macintosh HD”
Error: Live file system repair is not supported
6) Installed maverick on USB drive
7) Boot from USB drive. Tried verifying HD: Volume header needs minor repair. The volume Recovery HD was found corrupt and needs to be repaired. Verifying volume “Macintosh HD”: Error: live file system repair is not supported.
8) The terminal code says
9) Last login: Wed Feb 11 14:09:47 on console
10) xxxx-MacBook:~ xxxx$ diskutil list
11) /dev/disk0
12) #: TYPE NAME SIZE IDENTIFIER
13) 0: GUID_partition_scheme *160.0 GB disk0
14) 1: EFI EFI 209.7 MB disk0s1
15) 2: Apple_HFS Macintosh HD 80.1 GB disk0s2
16) 3: Apple_Boot Recovery HD 650.0 MB disk0s3
17) 4: Microsoft Basic Data 50.0 GB disk0s4
18) /dev/disk1
19) #: TYPE NAME SIZE IDENTIFIER
20) 0: GUID_partition_scheme *15.6 GB disk1
21) 1: EFI EFI 209.7 MB disk1s1
22) 2: Apple_HFS BOOT 14.8 GB disk1s2
23) 3: Apple_Boot Recovery HD 650.0 MB disk1s3
24) Saeedehs-MacBook:~ saeedehmirbagheri$ diskutil cs list
25) No CoreStorage logical volume groups found
26) Saeedehs-MacBook:~ saeedehmirbagheri$ sudo gpt -vv -r show /dev/disk0
27) Password:
28) gpt show: /dev/disk0: mediasize=160041885696; sectorsize=512; blocks=312581808
29) gpt show: /dev/disk0: PMBR at sector 0
30) gpt show: /dev/disk0: Pri GPT at sector 1
31) gpt show: /dev/disk0: Sec GPT at sector 312581807
32) start size index contents
33) 0 1 PMBR
34) 1 1 Pri GPT header
35) 2 32 Pri GPT table
36) 34 6
37) 40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
38) 409640 156394528 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
39) 156804168 1269544 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
40) 158073712 56853648
41) 214927360 97652736 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
42) 312580096 1679
43) 312581775 32 Sec GPT table
44) 312581807 1 Sec GPT header
45) xxxx-MacBook:~ xxxx$ sudo fdisk /dev/disk0
46) Disk: /dev/disk0 geometry: 19457/255/63 [312581808 sectors]
47) Signature: 0xAA55
48) Starting Ending
49) #: id cyl hd sec - cyl hd sec [ start - size]
50) ------------------------------------------------------------------------Thank you -
I booted from external USB. The diskutil list output is from OS x booting from the USB, which shows the following:
Saeedehs-MacBook:~ saeedehmirbagheri$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *160.0 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_HFS Macintosh HD 80.1 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
4: Microsoft Basic Data 50.0 GB disk0s4
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *15.6 GB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_HFS BOOT 14.8 GB disk1s2
3: Apple_Boot Recovery HD 650.0 MB disk1s3
Saeedehs-MacBook:~ saeedehmirbagheri$ diskutil cs list
No CoreStorage logical volume groups found
I am not able to use target disk mode because I don't have firewire/thunderbolt ports. -
Trying to repair Bootcamp but keyboard not working at installation screen?
Okay so I was a happy little camper, had windows 7 running on bootcamp perfectly and had yosemite installed recently.
Bootcamp was running out of space so I created an exFat partition and that's when the past 24 hours of my life have turned into ****.
Bootcamp would show in system preferences but when I restarted the computer and held alt, it would not show at start up neither directly restarting into bootcamp worked. Finally found a solution for that, did the whole fdisk stuff and fixed the MBPR etc etc. Now bootcamp is present at start up via alt option but once I start I only get a black screen with a blinking cursor. The solution to that I discovered is to repair bootcamp using a bootable usb/cd. Since I'm using a MBP retina 2014, I had to create a bootable usb via bootcamp. Now, when I go to the start up screen and select the win 7 bootable drive, I get to the installation screen to select language but my trackpad/mouse and keyboard are not responding!!! *takes a gun and shoots himself* How do I fix this ? I've been trying to find a solid solution but no luck! please someone help me outPlease, is there any workaround to this problem? I would wish to install arch on my PC.
Maybe installing an older version CD could work, but i am not sure if older versions of arch offer support for ext4...
EDIT: Ok I solved it, it was a very strange option in Bios, called "Installer OS Select", where the options to choose were Windows or Others, and I choose others and voilà!, Keyboard working.
Strange, right?
Last edited by Davigetto (2009-09-10 18:48:46) -
In using bootcamp to partition and install Windows on my computer, I keep hitting a snag. Message says that partitioning can not be completed because files can not be moved. I have tried several things but nothing seems to be helping to move the process along. What should I do?
Welcome to the Apple Support Communities
In most of the cases, that message appears when there's a problem with the filesystem, so you have to repair the disk. This doesn't mean that the hard drive is damaged.
First of all, open > About this Mac, and check Version. If it's 10.5 or 10.6, insert the Mac OS X DVD of the version you are using and press C key while your Mac is starting. If it's 10.7 or 10.8, press Command and R keys while your Mac is starting. After doing this:
1. Go to Utilities menu > Disk Utility (if you have 10.5 or 10.6) or open Disk Utility (10.7 and 10.8).
2. Choose Macintosh HD in the sidebar and repair the disk.
3. Restart, open Boot Camp Assistant and follow the steps to install Windows on the Mac -
Bootcamp 5 & Windows 7 install
Hello. I wanted to put this out there after getting terrible phone support from Apple over my bootcamp installation. After my harddrive died and was replaced by AppleCare, I had been attempting to install Windows 7 Home Premium on my iMac for over a week with no luck, and multiple phone calls of worthless advice from AppleCare on the problem and solution. My iMac: mid 2010, 21 inch running 10.8.3 with Bootcamp 5. When installing, I would have no troule partitioning the drive, and it would reboot to windows install disk only to get held up right after selecting Language / Keyboard with the message that a CD / DVD driver was missing and could not be found. I did create a USB drive with drivers from Bootcamp 5, but none of these would satisfy Windows 7.
AppleCare phone support insisted that Windows was NOT looking for a driver on the USB drive and the problem was from other issues: My first install used a DVD burned from an ISO file (obtained from microsoft and burned at slowest speed). They insisted that if I obtained an original instal disk of Windows 7, it would install correctly. So I purchased an OEM version of Windows 7 from Fry's for $99. Attempted install: same message about a missing driver. AppleCare claimed I needed a full version at $199. The AppleCare supervisor GAURANTEED this would be the problem. Fry's would not exchange my disc which was already opened, but informed me they'd be happy to install it, and it should not be a problem. After talking with the Fry's tech team, I attemped another install using the Bootcamp 4 drivers, downloaded from apple, and stored on a USB drive. Bam. Installed NO PROBLEM.
The problem was with Bootcamp 5 drivers (stored on a USB by Bootcamp) did not work on my system for the Windows 7 installation. This despite a number of assurances from Apple that the Bootcamp drivers were not the problem, THIS WAS THE PROBLEM. I wasted a week of my life trying to get Windows 7 reinstalled. Please apple, get your act together and fix this issue, or at least give your customers accurate advice. If nothing else, maybe my message here will save someone else the headache.svenj wrote:
Thanks again for the reply CS. Now I do actually have a question or two. This install was a reinstall of windows 7 after getting my iMac's harddrive replaced for Smart errors. And yes, I found the inability (or perhaps just a lack of doing so?) to back up my previous installation of Windows and have it easily restored in Time Machine to be a major PITA. I have been considering getting Parallels, or something similar. If I do, I'm wondering two things:
1. am I able to use my OEM version (tied to one machine, the same one that it is installed in Bootcamp on)?
2. Does Windows 7 within Parallels then get backed up in Time Machine, making it easily restorable?
thank you!
1. Yes, but you will have to activate one of the two manually (phone call to MS)
2. Yes, a VM is just another file, can be copied / moved / backed up like any other file.
And even though there was no 3
3. Parallels would be my last choice of VM, it is the fastest but the least reliable in my experience. From preference I use VirtualBox, and not because it is free, I own Fusion but no longer use it. Try VBox before spending money on another. -
I had had problems with the Quick time feature that came with Nikon's Picture Project software and had to delete it. (Actually, the operating system deleted it and Picture project when it repaired itself by reverting to a previous configuration.) I noticed that Quick time was again installed when I updated Firefox. Since I can't get the machine up and running, I am at a loss as to how to remove Quick time if that is what needs to be done.
I suggest taking it back to Best Buy. Once it has been opened, Apple will not handle the phone. Best Buy or another 3rd party are your only choices. Best Buy probably made an error when replacing the screen. Understand they are not an authorized Apple Service Center.
-
Just installed OS X updates and can no longer boot into Bootcamp
Just installed the latest updates for OS X Yosemite and now I can't boot to my Bootcamp partition. It doesn't show up in Startup Disks and it's not an option when booting while holding Option. The partition still shows up in Disk Utility but it no longer says BOOTCAMP, it now says disk04s. Is this fixable? I just wrote some data to that partition last night that I really don't want to lose and it hasn't yet been backed up. Thank you.
diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *121.3 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 91.0 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
4: Microsoft Basic Data 20.0 GB disk0s4
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS Macintosh HD *90.0 GB disk1
Logical Volume on disk0s2
2CC4DC13-C5C7-47E8-B005-3B8080275E8E
Unencrypted
sudo gpt -vv -r show /dev/disk0
gpt show: /dev/disk0: mediasize=121332826112; sectorsize=512; blocks=236978176
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 236978175
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 177734368 2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
178144008 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
179413544 18503128
197916672 39059456 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
236976128 2015
236978143 32 Sec GPT table
236978175 1 Sec GPT header
sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 14751/255/63 [236978176 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AC 1023 254 63 - 1023 254 63 [ 409640 - 177734368] <Unknown ID>
3: AB 1023 254 63 - 1023 254 63 [ 178144008 - 1269536] Darwin Boot
4: 0C 1023 254 63 - 1023 254 63 [ 197916672 - 39059456] Win95 FAT32LHere is a table to validate your values.
GPT 3 Start
GPT 3 Size
GPT 3 End
NTFS Start
Sector Offset
NTFS Size
NTFS End
Sector Offset (MB)
178144008
1269536
179413544
179415040
1496
57561081
236976121
1
Leave your Testdisk display and start a new Terminal Window.
If you see any error messages during the following steps, please stop and post back here with the error message. The following steps have values from your Testdisk output (and you can verify) in Steps 7 and 8.
Rebuild GPT4 using start/end offsets
Sudo gdisk /dev/rdisk0
P (print the full list of parts)
D (delete)
4 (part 4)
N (new part)
4 (part 4)
179415040- Start offset in bytes (start point for Bootcamp part)
+57561081- (Size offset as opposed to End offset)
0700 (Windows part type)
P (print list of all parts just to see what changes will be made)
W (Write the new GPT)
Y (Yes! really write the new GPT)
This will delete and re-write the GPT partition info for /dev/disk0s4.
Rebuild MBR to match the new GPT information thus resetting the Hybrid MBR. Use defaults for other questions (like partition codes). The only values that need modifications are the Boot flags and step 6. Accept all other defaults that Gdisk offers.
Sudo gdisk /dev/disk0
P (Print list of parts)
R (Recover)
H (chooses Hybrid)
Partitions numbers to be hybridized: 2 3 4
Y (Good for GRUB question)
N (part 2 boot flag)
N (part 3 boot flag)
Y (part 4 boot flag make NTFS bootable partition)
W (Write the new MBR)
Y (Yes! write the new MBR)
Reboot
Here is a sample Q&A from The GPT Fdisk. Notice the highlighted Press Enter/Return.
Place EFI GPT (0xEE) partition first in MBR (good for GRUB)? (Y/N): Y
Creating entry for GPT partition #2 (MBR partition #2)
Enter an MBR hex code (default AF): Press Enter/Return
Set the bootable flag? (Y/N): N
Creating entry for GPT partition #3 (MBR partition #3)
Enter an MBR hex code (default AB): Press Enter/Return
Set the bootable flag? (Y/N): N
Creating entry for GPT partition #4 (MBR partition #4)
Enter an MBR hex code (default 07): Press Enter/Return
Set the bootable flag? (Y/N): Y
Test 1 - Does Bootcamp Volume show up in Finder?
Test 2 - Can you see files in Bootcamp Volume?
Test 3 - Can you select Bootcamp in System Preferences -> Startup Disk?
Test 4 - If Test 3 is successful, select Bootcamp and Click Restart. -
I have a license for Photoshop CS6 which was installed on a PC that is now beyond repair. How can I install the software on my iMac? I still have the serial number that is registered to me Adobe Id.
Serial numnbers are platform specific so you will not be able to use it for the Mac if it was initially designated for a PC. YOu will need to perform a platform swap. See the following for information:
Change product platform or language
You can swap languages/platforms for a latest version product if you follow the instructions at the following link:
http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-language-swap.htm l -
Hello,
I am going through the following Technet article:
Repair Microsoft Dynamics CRM Server 2013 (
https://technet.microsoft.com/en-us/library/hh699749(v=crm.6).aspx )
The repair option asks for the original CRM DVD media location. The problem is that how the repair procedure knows about the service packs or update rollup files location?
My concern is that the repair procedure replaced the update DLLs (or other files installed by CRM service pack installer) by the RTM files in the original setup DVD.
Is there any special consideration for repairing Microsoft Dynamics CRM Server 2013 once the Service Pack or Update Rollup is installed?
Thank you,Hello,
I am going through the following Technet article:
Repair Microsoft Dynamics CRM Server 2013 (
https://technet.microsoft.com/en-us/library/hh699749(v=crm.6).aspx )
The repair option asks for the original CRM DVD media location. The problem is that how the repair procedure knows about the service packs or update rollup files location?
My concern is that the repair procedure replaced the update DLLs (or other files installed by CRM service pack installer) by the RTM files in the original setup DVD.
Is there any special consideration for repairing Microsoft Dynamics CRM Server 2013 once the Service Pack or Update Rollup is installed?
Thank you, -
Bootcamp is not showing install windows 7 usb option please help
bootcamp is not showing install windows 7 usb option please help
Tom von Mom wrote:
So MacBook Pros with DVD players doesn't support booting from USB stick?
They don't support booting Windows from a USB stick. -
I want to install Win7 on my new iMac using bootcamp. I got a USB drive for the win7 install-disc, but I don't own a cd for the Mac OS (since it was preinstalled when I got it). I read somewhere that I need a mac OS disc as well to complete the bootcamp installation of Win7 ?
I need some recomendations plz.Hello,
you don't need OS X install-disk, but I strongly recomend to burn a Win 7 disk. You may have some problems with installing it from a USB Flash :)
Cheers! -
After receiving an error when I try to install the latest update of OS-X, I took my laptop to oour schools IT dept. They tried to run the update in safe mode and then they got an error saying the system could not find the hard drive. Now they want to run a clean install which loses 1000's of docs and pictures. I have Block I exams in med school next Monday and all of my notes and slides are on that hard drive.
The IT dept took the hard drive out and tried to back it up and they said they other computer could not connect or find my hard drive.
Major panic....
I have Norton antivirus and have never found any viruses on the system. I also have a program called ExamSoft which some other students here have noted they had similar crashes. Not sure if that is the issue...Several take home messages here:
always back up before you update.
always back up anything you don't want to lose. Kind of like flossing. Only floss the teeth you don't want to lose.
Norton is very, very bad software, and you should get rid of it.
You don't need antivirus software on your mac. Antivirus software on macs causes more trouble than it is worth.
Your hard drive may be failing and thus may not be salvageable.
You could try booting into the recovery partition and seeing if you can repair your hard drive.
If that doesn't work, then there is a small chance that a third party utility (like Disk Warrior or TechTool) might be able to fix your drive (if it is not failing).
If that doesn't work, you may be able to send your drive and a lot of cash to a drive recovery service and see if they can get your files off it.
In the mean time, get notes and slides from a (smart) friend. -
Is this why I and so many others can't install Photoshop CS6 update 13.0.1.2 (Win)?
I'm well into my third evening trying to figure this one out. Here's what hasn't worked:
1) downloading and running standalone update patch (not easy to find)
2) replacing missing language files. I did this by installing Creative Suite CS6 to another computer and then copying missing language files (bloat) to my PS CS6 folder.
3) trying to reinstall Photoshop from my DVD - nope, it's an all or nothing proposition - would have needed to return everything to initial release state - no Repair available
4) following various 'expert' threads that for the most part are shots in the dark or from-some-script replies by outsourced support people, many of whom can't spell
5) researching ambiguous advice... do I reinstall, uninstall/reinstall, or run CS6 cleanup utility before uninstall/reinstall - what would be collateral damage for trying any of these.
OK, I knew I was fighting badly written installer problems. I remember very well the many evenings I wasted trying to get CS4 Creative Suite installed. In fact it was I who figured out what was broken and passed along the solution to a Senior Tech rep at Adobe.
Anyway, here's what I found at the end of a very long failed installation log file:
08/24/13 01:04:30:878 | [INFO] | | UPDATER | CORE | | | | 8504 | A valid subscription license found for = Photoshop-CS6-Win-GM
08/24/13 01:04:30:885 | [INFO] | | UPDATER | CORE | | | | 8504 | CFU(Webfeed): Patch is meant only for perpetual licenses, but client doesn't have a valid perpetual license.
08/24/13 01:04:30:885 | [INFO] | | UPDATER | CORE | | | | 8504 | CheckForManualApplicableUpdates : default Locale was found to be---- = en_US
08/24/13 01:04:30:886 | [INFO] | | UPDATER | CORE | | | | 8504 | CheckForManualApplicableUpdates : The update is not applicable as per licensing checks
08/24/13 01:04:30:886 | [INFO] | | UPDATER | CORE | | | | 8504 | Returning from << UCInitialize >> call error = 36 retVal = 0
08/24/13 01:04:31:014 | [INFO] | | UPDATER | CORE | | | | 5816 | Stepped into << UCGetUserPreferences >> call
08/24/13 01:04:31:028 | [INFO] | | UPDATER | CORE | | | | 5816 | Returning from << UCGetUserPreferences >> call error = 0 retVal = 1
Check out the 1st, 2nd and 4th lines. Why does the brain dead installer think my CS6 is a subscription. It was purchased as a permanent license and remained so until this CC abomination began to enforce totally wrong assumptions. I have subscribed to CC for the new features, not to cripple licenses I already paid for.
I found these contradictory lines in the middle of this file:
05/15/13 02:16:01:157 | [INFO] | | UPDATER | CORE | | | | 53920 | CFU(Webfeed): Patch is meant only for subscription licenses, but client doesn't have a valid subscription license.
05/15/13 02:16:01:157 | [INFO] | | UPDATER | CORE | | | | 53920 | Going in waiting state as following Recommendation is no more valid for this update(license mismatch)
05/15/13 02:16:01:159 | [INFO] | | UPDATER | CORE | | | | 53920 | CFU(Webfeed): Query licensing type for LEID = Photoshop-CS6-Win-GM
05/15/13 02:16:02:070 | [INFO] | | UPDATER | CORE | | | | 53920 | A valid perpetual license found for = Photoshop-CS6-Win-GM
05/15/13 02:16:02:072 | [INFO] | | UPDATER | CORE | | | | 53920 | CFU(Webfeed): Patch is meant only for subscription licenses, but client doesn't have a valid subscription license.
05/15/13 02:16:02:072 | [INFO] | | UPDATER | CORE | | | | 53920 | Going in waiting state as following Recommendation is no more valid for this update(license mismatch)
Could it be that my having installed CS6 to the D:\ drive is the culprit? I didn't have that option with CC
This cryptic mess seems to be the concatenation of several logs with Adobe's assorted rationales for failure to work. I wonder if anyone is left in the free support pool who understands these cryptic logs. If there's anyone does, here it is in its entirety:
12/22/12 04:54:20:610 | [INFO] | | UPDATER | CORE | | | | 4304 | >>> Adobe Updater Log Begin >>>
12/22/12 04:54:20:610 | [INFO] | | UPDATER | CORE | | | | 4304 | UpdaterCoreImpl::InitLogFile : Application Version 7.0.0.27
12/22/12 04:54:20:610 | [INFO] | | UPDATER | CORE | | | | 4304 | UpdaterCoreImpl::InitLogFile : cmdline option --> -logFile = C:\Users\klo\AppData\Local\Adobe\AAMUpdater\1.0\aamu.log
12/22/12 04:54:20:611 | [INFO] | | UPDATER | CORE | | | | 4304 | UpdaterCoreImpl::InitLogFile : cmdline option --> -logLevel = 2
12/22/12 04:54:20:611 | [INFO] | | UPDATER | CORE | | | | 4304 | Stepped into << UCInitialize >> call
12/22/12 04:54:20:645 | [INFO] | | UPDATER | CORE | | | | 4304 | UCInitialize : AAM is launched via CCM.
12/22/12 04:54:20:645 | [INFO] | | UPDATER | CORE | | | | 4304 | Stepped into << UCSetUpdateEnginePath >> call
12/22/12 04:54:20:711 | [INFO] | | UPDATER | CORE | | | | 4304 | Returning from << UCSetUpdateEnginePath >> call error = 0 retVal = 1
12/22/12 04:54:20:722 | [INFO] | | UPDATER | CORE | | | | 4304 | Stepped into << UCSetDeploymentEnginePath >> call
12/22/12 04:54:20:743 | [INFO] | | UPDATER | CORE | | | | 4304 | Returning from << UCSetDeploymentEnginePath >> call error = 0 retVal = 1
12/22/12 04:54:20:743 | [INFO] | | UPDATER | CORE | | | | 4304 | Returning from << UCInitialize >> call error = 0 retVal = 1
12/22/12 04:54:20:743 | [INFO] | | UPDATER | CORE | | | | 4304 | Stepped into << UCGetUserPreferences >> call
12/22/12 04:54:20:748 | [INFO] | | UPDATER | CORE | | | | 4304 | Returning from << UCGetUserPreferences >> call error = 0 retVal = 1
12/22/12 04:54:28:272 | [INFO] | | UPDATER | CORE | | | | 6024 | Stepped into << UCCheckForUpdates >> call
12/22/12 04:54:28:402 | [INFO] | | UPDATER | CORE | | | | 6024 | CFU(Webfeed): Query licensing type for LEID = Illustrator-CS6-Win-GM
12/22/12 04:54:28:475 | [INFO] | | UPDATER | CORE | | | | 6024 | A valid perpetual license found for = Illustrator-CS6-Win-GM
12/22/12 04:54:28:477 | [INFO] | | UPDATER | CORE | | | | 6024 | CFU(Webfeed): Patch is meant only for subscription licenses, but client doesn't have a valid subscription license.
12/22/12 04:54:28:477 | [INFO] | | UPDATER | CORE | | | | 6024 | Going in waiting state as following Recommendation is no more valid for this update(license mismatch)
12/22/12 04:54:28:480 | [INFO] | | UPDATER | CORE | | | | 6024 | CFU(Webfeed): Query licensing type for LEID = Dreamweaver-CS6-Win-GM
12/22/12 04:54:28:526 | [INFO] | | UPDATER | CORE | | | | 6024 | A valid perpetual license found for = Dreamweaver-CS6-Win-GM
12/22/12 04:54:28:528 | [INFO] | | UPDATER | CORE | | | | 6024 | CFU(Webfeed): Patch is meant only for subscription licenses, but client doesn't have a valid subscription license.
12/22/12 04:54:28:528 | [INFO] | | UPDATER | CORE | | | | 6024 | CFU(Webfeed): Query licensing type for LEID = Dreamweaver-CS6-Win-GM
12/22/12 04:54:28:574 | [INFO] | | UPDATER | CORE | | | | 6024 | A valid perpetual license found for = Dreamweaver-CS6-Win-GM
12/22/12 04:54:28:575 | [INFO] | | UPDATER | CORE | | | | 6024 | CFU(Webfeed): Patch is meant only for subscription licenses, but client doesn't have a valid subscription license.
12/22/12 04:54:28:575 | [INFO] | | UPDATER | CORE | | | | 6024 | Going in waiting state as following Recommendation is no more valid for this update(license mismatch)
12/22/12 04:54:28:577 | [INFO] | | UPDATER | CORE | | | | 6024 | CFU(Webfeed): Query licensing type for LEID = Photoshop-CS6-Win-GM
12/22/12 04:54:28:628 | [INFO] | | UPDATER | CORE | | | | 6024 | A valid perpetual license found for = Photoshop-CS6-Win-GM
12/22/12 04:54:28:630 | [INFO] | | UPDATER | CORE | | | | 6024 | CFU(Webfeed): Patch is meant only for subscription licenses, but client doesn't have a valid subscription license.
12/22/12 04:54:28:630 | [INFO] | | UPDATER | CORE | | | | 6024 | Going in waiting state as following Recommendation is no more valid for this update(license mismatch)
12/22/12 04:54:28:693 | [INFO] | | UPDATER | CORE | | | | 6024 | SetCFUInProgress : = 1
12/22/12 04:54:28:693 | [INFO] | | UPDATER | CORE | | | | 6024 | Returning from << UCCheckForUpdates >> call error = 0 retVal = 1
12/22/12 04:54:28:695 | [INFO] | | UPDATER | CORE | | | | 5708 | CFU(Webfeed): Downloading WebFeed
12/22/12 04:54:28:696 | [INFO] | | UPDATER | CORE | | | | 5708 | GDEDownloader:: GDEInitialize Successful
12/22/12 04:54:28:703 | [INFO] | | UPDATER | CORE | | | | 5708 | GDEDownloader:: GDEInitDownloader Successful
12/22/12 04:54:28:719 | [INFO] | | UPDATER | CORE | | | | 5708 | GDEDownloader:: GDESetThreadCount Successful
12/22/12 04:54:28:901 | [INFO] | | UPDATER | CORE | | | | 5708 | GDEDownloader:: GDEGetEtag Successful
12/22/12 04:54:28:901 | [INFO] | | UPDATER | CORE | | | | 5708 | CFU(Webfeed): Web feed hasn't changed, so no need to download.
12/22/12 04:54:28:901 | [INFO] | | UPDATER | CORE | | | | 5708 | GDEDownloader:: GDE Closed
12/22/12 04:54:28:902 | [INFO] | | UPDATER | CORE | | | | 5708 | CFU(Webfeed): Webfeed is empty
12/22/12 04:54:28:902 | [INFO] | | UPDATER | CORE | | | | 5708 | CFU(Webfeed): MRL is empty
12/22/12 04:54:29:693 | [INFO] | | UPDATER | CORE | | | | 6012 | SetCFUInProgress : = 0
12/22/12 04:54:29:693 | [INFO] | | UPDATER | CORE | | | | 6012 | SetCFUInProgress : = 0
12/22/12 04:54:29:693 | [INFO] | | UPDATER | CORE | | | | 6012 | Check for Updates was done successfully.
12/22/12 04:54:29:705 | [INFO] | | UPDATER | CORE | | | | 6012 | UCGetprogress : Check for updates returning state for reffId =
12/22/12 04:54:29:705 | [INFO] | | UPDATER | CORE | | | | 6012 | UCGetprogress : Check for updates returning state = 21
12/22/12 04:54:29:705 | [INFO] | | UPDATER | CORE | | | | 6012 | UCGetprogress : Check for updates returning outError = 0
12/22/12 04:54:29:705 | [INFO] | | UPDATER | CORE | | | | 6012 | UCGetprogress : Check for updates returning percent = 0
12/22/12 04:54:29:705 | [INFO] | | UPDATER | CORE | | | | 6012 | UCGetprogress : Check for updates returning unique error code string = U21M1C0
12/22/12 04:54:29:705 | [INFO] | | UPDATER | CORE | | | | 6012 | Stepped into << UCGetAvailableUpdateStatus >> call
12/22/12 04:54:29:708 | [INFO] | | UPDATER | CORE | | | | 6012 | Returning from << UCGetAvailableUpdateStatus >> call error = 0 retVal = 1
12/22/12 04:55:07:213 | [INFO] | | UPDATER | CORE | | | | 5688 | Stepped into << UCTerminate >> call.
12/22/12 04:55:07:214 | [INFO] | | UPDATER | CORE | | | | 5688 | Returning from << UCTerminate >> call with value = 1
12/22/12 04:55:07:214 | [INFO] | | UPDATER | CORE | | | | 5688 | UpdaterCoreImpl::ShutdownLogFile : Going to call ShutdownESDLogFile()
12/22/12 04:55:07:214 | [INFO] | | UPDATER | CORE | | | | 5688 | <<< Adobe Updater Log End <<<
01/16/13 21:48:24:581 | [INFO] | | UPDATER | CORE | | | | 44144 | >>> Adobe Updater Log Begin >>>
01/16/13 21:48:24:581 | [INFO] | | UPDATER | CORE | | | | 44144 | UpdaterCoreImpl::InitLogFile : Application Version 7.0.0.27
01/16/13 21:48:24:581 | [INFO] | | UPDATER | CORE | | | | 44144 | UpdaterCoreImpl::InitLogFile : cmdline option --> -logFile = C:\Users\klo\AppData\Local\Adobe\AAMUpdater\1.0\aamu.log
01/16/13 21:48:24:582 | [INFO] | | UPDATER | CORE | | | | 44144 | UpdaterCoreImpl::InitLogFile : cmdline option --> -logLevel = 2
01/16/13 21:48:24:582 | [INFO] | | UPDATER | CORE | | | | 44144 | Stepped into << UCInitialize >> call
01/16/13 21:48:24:611 | [INFO] | | UPDATER | CORE | | | | 44144 | UCInitialize : AAM is launched via Updater.
01/16/13 21:48:24:612 | [INFO] | | UPDATER | CORE | | | | 44144 | Stepped into << UCSetUpdateEnginePath >> call
01/16/13 21:48:24:676 | [INFO] | | UPDATER | CORE | | | | 44144 | Returning from << UCSetUpdateEnginePath >> call error = 0 retVal = 1
01/16/13 21:48:24:685 | [INFO] | | UPDATER | CORE | | | | 44144 | Stepped into << UCSetDeploymentEnginePath >> call
01/16/13 21:48:24:695 | [INFO] | | UPDATER | CORE | | | | 44144 | Returning from << UCSetDeploymentEnginePath >> call error = 0 retVal = 1
01/16/13 21:48:24:695 | [INFO] | | UPDATER | CORE | | | | 44144 | Returning from << UCInitialize >> call error = 0 retVal = 1
01/16/13 21:48:24:965 | [INFO] | | UPDATER | CORE | | | | 44168 | Stepped into << UCGetUserPreferences >> call
01/16/13 21:48:24:973 | [INFO] | | UPDATER | CORE | | | | 44168 | Returning from << UCGetUserPreferences >> call error = 0 retVal = 1
01/16/13 21:48:24:978 | [INFO] | | UPDATER | CORE | | | | 44768 | Stepped into << UCCheckForUpdates >> call
01/16/13 21:48:25:066 | [INFO] | | UPDATER | CORE | | | | 44768 | CFU(Webfeed): Query licensing type for LEID = Illustrator-CS6-Win-GM
01/16/13 21:48:25:145 | [INFO] | | UPDATER | CORE | | | | 44768 | A valid perpetual license found for = Illustrator-CS6-Win-GM
01/16/13 21:48:25:164 | [INFO] | | UPDATER | CORE | | | | 44768 | CFU(Webfeed): Patch is meant only for subscription licenses, but client doesn't have a valid subscription license.
01/16/13 21:48:25:164 | [INFO] | | UPDATER | CORE | | | | 44768 | Going in waiting state as following Recommendation is no more valid for this update(license mismatch)
01/16/13 21:48:25:168 | [INFO] | | UPDATER | CORE | | | | 44768 | CFU(Webfeed): Query licensing type for LEID = Dreamweaver-CS6-Win-GM
01/16/13 21:48:25:225 | [INFO] | | UPDATER | CORE | | | | 44768 | A valid perpetual license found for = Dreamweaver-CS6-Win-GM
01/16/13 21:48:25:227 | [INFO] | | UPDATER | CORE | | | | 44768 | CFU(Webfeed): Patch is meant only for subscription licenses, but client doesn't have a valid subscription license.
01/16/13 21:48:25:227 | [INFO] | | UPDATER | CORE | | | | 44768 | CFU(Webfeed): Query licensing type for LEID = Dreamweaver-CS6-Win-GM
01/16/13 21:48:25:281 | [INFO] | | UPDATER | CORE | | | | 44768 | A valid perpetual license found for = Dreamweaver-CS6-Win-GM
01/16/13 21:48:25:283 | [INFO] | | UPDATER | CORE | | | | 44768 | CFU(Webfeed): Patch is meant only for subscription licenses, but client doesn't have a valid subscription license.
01/16/13 21:48:25:283 | [INFO] | | UPDATER | CORE | | | | 44768 | Going in waiting state as following Recommendation is no more valid for this update(license mismatch)
01/16/13 21:48:25:286 | [INFO] | | UPDATER | CORE | | | | 44768 | CFU(Webfeed): Query licensing type for LEID = Bridge-CS6-Win-GM
01/16/13 21:48:25:320 | [INFO] | | UPDATER | CORE | | | | 44768 | No valid license found for = Bridge-CS6-Win-GM
01/16/13 21:48:25:323 | [INFO] | | UPDATER | CORE | | | | 44768 | CFU(Webfeed): Query licensing type for LEID = Bridge-CS6-Win-GM
01/16/13 21:48:25:358 | [INFO] | | UPDATER | CORE | | | | 44768 | No valid license found for = Bridge-CS6-Win-GM
01/16/13 21:48:25:362 | [INFO] | | UPDATER | CORE | | | | 44768 | CFU(Webfeed): Query licensing type for LEID = Photoshop-CS6-Win-GM
01/16/13 21:48:25:425 | [INFO] | | UPDATER | CORE | | | | 44768 | A valid perpetual license found for = Photoshop-CS6-Win-GM
01/16/13 21:48:25:427 | [INFO] | | UPDATER | CORE | | | | 44768 | CFU(Webfeed): Patch is meant only for subscription licenses, but client doesn't have a valid subscription license.
01/16/13 21:48:25:427 | [INFO] | | UPDATER | CORE | | | | 44768 | Going in waiting state as following Recommendation is no more valid for this update(license mismatch)
01/16/13 21:48:25:493 | [INFO] | | UPDATER | CORE | | | | 44768 | SetCFUInProgress : = 1
01/16/13 21:48:25:493 | [INFO] | | UPDATER | CORE | | | | 44768 | Returning from << UCCheckForUpdates >> call error = 0 retVal = 1
01/16/13 21:48:25:494 | [INFO] | | UPDATER | CORE | | | | 44144 | CFU(Webfeed): Downloading WebFeed
01/16/13 21:48:25:497 | [INFO] | | UPDATER | CORE | | | | 44144 | GDEDownloader:: GDEInitialize Successful
01/16/13 21:48:25:504 | [INFO] | | UPDATER | CORE | | | | 44144 | GDEDownloader:: GDEInitDownloader Successful
01/16/13 21:48:25:524 | [INFO] | | UPDATER | CORE | | | | 44144 | GDEDownloader:: GDESetThreadCount Successful
01/16/13 21:48:25:630 | [INFO] | | UPDATER | CORE | | | | 44144 | GDEDownloader:: GDEGetEtag Successful
01/16/13 21:48:25:630 | [INFO] | | UPDATER | CORE | | | | 44144 | CFU(Webfeed): Web feed hasn't changed, so no need to download.
01/16/13 21:48:25:630 | [INFO] | | UPDATER | CORE | | | | 44144 | GDEDownloader:: GDE Closed
01/16/13 21:48:25:631 | [INFO] | | UPDATER | CORE | | | | 44144 | CFU(Webfeed): Webfeed is empty
01/16/13 21:48:25:631 | [INFO] | | UPDATER | CORE | | | | 44144 | CFU(Webfeed): MRL is empty
01/16/13 21:48:25:793 | [INFO] | | UPDATER | CORE | | | | 43524 | SetCFUInProgress : = 0
01/16/13 21:48:25:793 | [INFO] | | UPDATER | CORE | | | | 43524 | SetCFUInProgress : = 0
01/16/13 21:48:25:793 | [INFO] | | UPDATER | CORE | | | | 43524 | Check for Updates was done successfully.
01/16/13 21:48:25:805 | [INFO] | | UPDATER | CORE | | | | 43524 | UCGetprogress : Check for updates returning state for reffId =
01/16/13 21:48:25:806 | [INFO] | | UPDATER | CORE | | | | 43524 | UCGetprogress : Check for updates returning state = 21
01/16/13 21:48:25:806 | [INFO] | | UPDATER | CORE | | | | 43524 | UCGetprogress : Check for updates returning outError = 0
01/16/13 21:48:25:806 | [INFO] | | UPDATER | CORE | | | | 43524 | UCGetprogress : Check for updates returning percent = 0
01/16/13 21:48:25:806 | [INFO] | | UPDATER | CORE | | | | 43524 | UCGetprogress : Check for updates returning unique error code string = U21M1C0
01/16/13 21:48:26:005 | [INFO] | | UPDATER | CORE | | | | 44168 | Stepped into << UCGetUserPreferences >> call
01/16/13 21:48:26:023 | [INFO] | | UPDATER | CORE | | | | 44168 | Returning from << UCGetUserPreferences >> call error = 0 retVal = 1
01/16/13 21:48:26:029 | [INFO] | | UPDATER | CORE | | | | 44168 | Stepped into << UCGetInstalledChannels >> call
01/16/13 21:48:26:185 | [INFO] | | UPDATER | CORE | | | | 44168 | Returning from << UCGetInstalledChannels >> call error = 0 retVal = 1
01/16/13 21:48:26:799 | [INFO] | | UPDATER | CORE | | | | 44168 | Stepped into << UCGetInstalledChannels >> call
01/16/13 21:48:26:842 | [INFO] | | UPDATER | CORE | | | | 44168 | Returning from << UCGetInstalledChannels >> call error = 0 retVal = 1
01/16/13 21:48:26:855 | [INFO] | | UPDATER | CORE | | | | 44168 | Stepped into << UCGetAvailableUpdateStatus >> call
01/16/13 21:48:26:856 | [INFO] | | UPDATER | CORE | | | | 44168 | Returning from << UCGetAvailableUpdateStatus >> call error = 0 retVal = 1
01/16/13 21:48:27:055 | [INFO] | | UPDATER | CORE | | | | 44168 | SetViewedUpdate: The update is waiting for a product event! Not set to viewed.
01/16/13 21:48:27:055 | [INFO] | | UPDATER | CORE | | | | 44168 | SetViewedUpdate: The update is waiting for a product event! Not set to viewed.
01/16/13 21:48:27:055 | [INFO] | | UPDATER | CORE | | | | 44168 | SetViewedUpdate: The update is waiting for a product event! Not set to viewed.
01/16/13 21:49:00:587 | [INFO] | | UPDATER | CORE | | | | 45080 | Stepped into << UCDownloadUpdates >> call
01/16/13 21:49:00:655 | [INFO] | | UPDATER | CORE | | | | 45080 | Stepped into << AdobeUpdaterCreateThread >> API
01/16/13 21:49:00:655 | [INFO] | | UPDATER | CORE | | | | 45080 | Returning from << AdobeUpdaterCreateThread >> API
01/16/13 21:49:00:655 | [INFO] | | UPDATER | CORE | | | | 45080 | StartUpdateInstallerSubsystem : LaunchUpdateInstallerAsAdmin before.
01/16/13 21:49:00:655 | [INFO] | | UPDATER | CORE | | | | 45080 | LaunchUpdateInstallerAsAdmin: UpdateInstaller utility path is : = C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\core\..\UWA\Adobe Application Manager (Updater).exe
01/16/13 21:49:00:655 | [INFO] | | UPDATER | CORE | | | | 45084 | ThreadInstallRequestHandler : Creating new IPC Object for Install control
01/16/13 21:49:00:655 | [INFO] | | UPDATER | CORE | | | | 45084 | ThreadInstallRequestHandler : Initializing IPC channel for Install control
01/16/13 21:49:00:656 | [INFO] | | UPDATER | CORE | | | | 45084 | ThreadInstallRequestHandler : Releasing kSyncUpdaterCoreIPCInitializationWaitKey Lock after IPC Channel.
01/16/13 21:49:00:656 | [INFO] | | UPDATER | CORE | | | | 45084 | ThreadInstallRequestHandler : Acquiring kSyncUpdaterCoreIPCRecvPacketWaitKey Lock before re intializing IPC Channel.
01/16/13 21:49:00:671 | [INFO] | | UPDATER | CORE | | | | 45080 | LaunchUpdateInstallerAsAdmin: sCmdLineArgs1 is : = -mode=productupdate
01/16/13 21:49:00:671 | [INFO] | | UPDATER | CORE | | | | 45080 | LaunchUpdateInstallerAsAdmin: sCmdLineArgs2 is : = -appDataDir=C:\Users\klo\AppData\Local\Adobe\AAMUpdater\1.0
01/16/13 21:49:00:671 | [INFO] | | UPDATER | CORE | | | | 45080 | LaunchUpdateInstallerAsAdmin: sCmdLineArgs3 is : = -deploymentEnginePath=C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\core\..\DECore\Setup.exe
01/16/13 21:49:00:671 | [INFO] | | UPDATER | CORE | | | | 45080 | Stepped into << AdobeUpdaterCreateNewProcess >> API
01/16/13 21:49:00:671 | [INFO] | | UPDATER | CORE | | | | 45080 | AdobeUpdaterCreateNewProcess : About to launch executable at = C
01/16/13 21:49:00:671 | [INFO] | | UPDATER | CORE | | | | 45080 | AdobeUpdaterCreateNewProcess : Working Dir will be = C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\core\..\UWA
01/16/13 21:49:00:743 | [INFO] | | UPDATER | CORE | | | | 45080 | AdobeUpdaterCreateNewProcess : Executable launch was successful.
01/16/13 21:49:00:743 | [INFO] | | UPDATER | CORE | | | | 45080 | Returning from << AdobeUpdaterCreateNewProcess >> API
01/16/13 21:49:00:743 | [INFO] | | UPDATER | CORE | | | | 45080 | LaunchUpdateInstallerAsAdmin: UpdateInstaller launch executed successfully.
01/16/13 21:49:00:743 | [INFO] | | UPDATER | CORE | | | | 45080 | StartUpdateInstallerSubsystem : Releasing kSyncUpdaterCoreIPCRecvPacketWaitKey Lock.
01/16/13 21:49:00:743 | [INFO] | | UPDATER | CORE | | | | 45080 | StartUpdateInstallerSubsystem : Acquiring kSyncUpdaterCoreIPCInitializationWaitKey Lock before intializing IPC Channel.
01/16/13 21:49:00:743 | [INFO] | | UPDATER | CORE | | | | 45080 | StartUpdateInstallerSubsystem : Acquiring kSyncUpdaterCoreIPCAckPacketWaitKey Lock before re intializing IPC Channel.
01/16/13 21:49:00:787 | [INFO] | | UPDATER | CORE | | | | 45084 | InstallRequest_MessageHandler_kID_Ack : Received kID_Ack packet from Installer sub-system.
01/16/13 21:49:00:787 | [INFO] | | UPDATER | CORE | | | | 45084 | NotifyResultToInstallerSubSystem : Sending packet with id = 9
01/16/13 21:49:00:886 | [INFO] | | UPDATER | CORE | | | | 45080 | StartUpdateInstallerSubsystem : Received ACK from Update Installer subsystem for Initialization.
01/16/13 21:49:00:886 | [INFO] | | UPDATER | CORE | | | | 45080 | SetDownloadUpdatesInProgress : = 1
01/16/13 21:49:00:886 | [INFO] | | UPDATER | CORE | | | | 45080 | Returning from << UCDownloadUpdates >> call error = 0 retVal = 1
01/16/13 21:49:00:887 | [INFO] | | UPDATER | CORE | | | | 45124 | ThreadDownloadUpdates: Downloading installer for update refID: AdobeBridgeCS664Bit-5.0/5.0.2
01/16/13 21:49:00:887 | [INFO] | | UPDATER | CORE | | | | 45124 | getValidationType: Going for Code signing check for the downloaded installer
01/16/13 21:49:00:897 | [INFO] | | UPDATER | CORE | | | | 45124 | ThreadDownloadUpdates:: Initializing Download
01/16/13 21:49:00:898 | [INFO] | | UPDATER | CORE | | | | 45124 | GDEDownloader:: GDEInitialize Successful
01/16/13 21:49:00:903 | [INFO] | | UPDATER | CORE | | | | 45124 | GDEDownloader:: GDEInitDownloader Successful
01/16/13 21:49:01:075 | [INFO] | | UPDATER | CORE | | | | 45124 | GDEDownloader:: GDEGetFileSize Successful
01/16/13 21:49:01:075 | [INFO] | | UPDATER | CORE | | | | 45124 | ThreadDownloadUpdates:: Starting Download
01/16/13 21:49:01:197 | [INFO] | | UPDATER | CORE | | | | 45124 | GDEDownloader:: Download Successfully Started
01/16/13 21:50:37:322 | [INFO] | | UPDATER | CORE | | | | 45124 | ThreadDownloadUpdates:: Download Complete
01/16/13 21:50:37:322 | [INFO] | | UPDATER | CORE | | | | 45124 | GDEDownloader:: GDE Closed
01/16/13 21:50:37:325 | [INFO] | | UPDATER | CORE | | | | 45124 | DoValidation: Going for Code signing check for the downloaded installer
01/16/13 21:50:38:520 | [INFO] | | UPDATER | CORE | | | | 45124 | ThreadDownloadUpdates: Validation for the downloaded Installer: PASSED
01/16/13 21:50:38:747 | [INFO] | | UPDATER | CORE | | | | 43524 | SetDownloadUpdatesInProgress : = 0
01/16/13 21:50:38:747 | [INFO] | | UPDATER | CORE | | | | 43524 | SetDownloadUpdatesInProgress : = 0
01/16/13 21:50:38:747 | [INFO] | | UPDATER | CORE | | | | 43524 | UCGetprogress : (B) Download thread is completed and is closed successfully.
01/16/13 21:50:38:865 | [INFO] | | UPDATER | CORE | | | | 43524 | UCGetprogress : Updates download returning state for reffId = AdobeBridgeCS664Bit-5.0/5.0.2
01/16/13 21:50:38:865 | [INFO] | | UPDATER | CORE | | | | 43524 | UCGetprogress : Updates download returning state = 22
01/16/13 21:50:38:865 | [INFO] | | UPDATER | CORE | | | | 43524 | UCGetprogress : Updates download returning outError = 0
01/16/13 21:50:38:865 | [INFO] | | UPDATER | CORE | | | | 43524 | UCGetprogress : Updates download returning percent = 100
01/16/13 21:50:38:865 | [INFO] | | UPDATER | CORE | | | | 43524 | UCGetprogress : Updates download returning unique error code string = U22M1D0
01/16/13 21:50:38:979 | [INFO] | | UPDATER | CORE | | | | 44168 | UCIsSelfUpdateAvailable : Function returned with value => = 0
01/16/13 21:50:38:979 | [INFO] | | UPDATER | CORE | | | | 44168 | UCIsSelfUpdateAvailable : Is BOB downloaded => = 0
01/16/13 21:50:38:992 | [INFO] | | UPDATER | CORE | | | | 45828 | Stepped into << UCInstallUpdates >> call
01/16/13 21:50:38:993 | [INFO] | | UPDATER | CORE | | | | 45828 | UCIsSelfUpdateAvailable : Function returned with value => = 0
01/16/13 21:50:38:993 | [INFO] | | UPDATER | CORE | | | | 45828 | UCIsSelfUpdateAvailable : Is BOB downloaded => = 0
01/16/13 21:50:38:993 | [INFO] | | UPDATER | CORE | | | | 45828 | UCInstallUpdates : (B) UCIsSelfUpdateAvailable API returned value = 0
01/16/13 21:50:38:995 | [INFO] | | UPDATER | CORE | | | | 45828 | UCIsCurrentPatchRIBSBased : inside
01/16/13 21:50:39:000 | [INFO] | | UPDATER | CORE | | | | 45828 | UCIsCurrentPatchRIBSBased : Function returned with value => = 1
01/16/13 21:50:39:000 | [INFO] | | UPDATER | CORE | | | | 45828 | UCIsSelfUpdateAvailable : IsRIBSBasedpatch => = 1
01/16/13 21:50:39:000 | [INFO] | | UPDATER | CORE | | | | 45828 | SetInstallUpdatesInProgress : = 1
01/16/13 21:50:39:000 | [INFO] | | UPDATER | CORE | | | | 45828 | SetInstallUpdatesInProgressCached : = 1
01/16/13 21:50:39:000 | [INFO] | | UPDATER | CORE | | | | 45828 | UCInstallUpdates : Sending install request to Update Installer for reffID = -reffIDs=AdobeBridgeCS664Bit-5.0/5.0.2
01/16/13 21:50:39:020 | [INFO] | | UPDATER | CORE | | | | 45828 | Returning from << UCInstallUpdates >> call error = 0 retVal = 1
01/16/13 21:50:39:782 | [INFO] | | UPDATER | CORE | | | | 45084 | InstallRequest_MessageHandler_kID_Progress : Received UNPACKING progress percent = = 3
01/16/13 21:50:40:491 | [INFO] | | UPDATER | CORE | | | | 45084 | InstallRequest_MessageHandler_kID_SwitchPipe : UpdateRefID = AdobeBridgeCS664Bit-5.0/5.0.2|Adobe Bridge CS6 5.0.2 Update
01/16/13 21:50:40:492 | [INFO] | | UPDATER | CORE | | | | 45084 | InstallRequest_MessageHandler_kID_SwitchPipe : Last UNPACKING percent (after switch) till any further progress = = 13
01/16/13 21:50:40:492 | [INFO] | | UPDATER | CORE | | | | 45084 | Stepped into << AdobeUpdaterCreateThread >> API
01/16/13 21:50:40:492 | [INFO] | | UPDATER | CORE | | | | 45084 | Returning from << AdobeUpdaterCreateThread >> API
01/16/13 21:50:40:492 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHandler : Creating new IPC Object for Progress for install progress
01/16/13 21:50:40:492 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHandler : Initializing IPC channel for install progress
01/16/13 21:50:40:492 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHandler : doContinue = 1
01/16/13 21:50:40:492 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 10
01/16/13 21:50:40:492 | [INFO] | | UPDATER | CORE | | | | 45860 | InstallProgress_MessageHandler_kID_Invalid : Got kID_Invalid packets.
01/16/13 21:50:40:502 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 10
01/16/13 21:50:40:512 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 10
01/16/13 21:50:40:522 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 10
01/16/13 21:50:40:532 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 10
01/16/13 21:50:40:542 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 10
01/16/13 21:50:40:552 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 10
01/16/13 21:50:40:562 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 10
01/16/13 21:50:40:572 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 10
01/16/13 21:50:40:582 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 10
01/16/13 21:50:40:592 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 10
01/16/13 21:50:40:602 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 10
01/16/13 21:50:40:612 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 10
01/16/13 21:50:40:622 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 10
01/16/13 21:50:40:632 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 10
01/16/13 21:50:40:642 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 10
01/16/13 21:50:40:652 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 10
01/16/13 21:50:40:662 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 10
01/16/13 21:50:40:672 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 8
01/16/13 21:50:40:672 | [INFO] | | UPDATER | CORE | | | | 45860 | InstallProgress_MessageHandler_kID_Progress : Received kID_Progress packet and the progress percent is = 13
01/16/13 21:50:40:677 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 6
01/16/13 21:50:46:191 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 6
01/16/13 21:50:53:699 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 6
01/16/13 21:50:55:260 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 6
01/16/13 21:50:55:399 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 0
01/16/13 21:50:56:305 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 6
01/16/13 21:50:56:735 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 0
01/16/13 21:50:57:661 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 6
01/16/13 21:50:58:561 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 6
01/16/13 21:50:59:561 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 6
01/16/13 21:50:59:561 | [INFO] | | UPDATER | CORE | | | | 45860 | InstallProgress_MessageHandler_kID_Progress : Received kID_Progress packet and the progress percent is = 96
01/16/13 21:51:00:461 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 6
01/16/13 21:51:01:461 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 6
01/16/13 21:51:02:461 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 6
01/16/13 21:51:03:462 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 6
01/16/13 21:51:04:362 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 6
01/16/13 21:51:05:362 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 6
01/16/13 21:51:06:362 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 6
01/16/13 21:51:06:801 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 0
01/16/13 21:51:07:801 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 0
01/16/13 21:51:08:801 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 0
01/16/13 21:51:08:801 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 0
01/16/13 21:51:08:801 | [INFO] | | UPDATER | CORE | | | | 45860 | InstallProgress_MessageHandler_kID_RequestRestart : Received kID_RequestRestart packet from Switched pipe with errcode . = 0
01/16/13 21:51:08:806 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 6
01/16/13 21:51:08:806 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 6
01/16/13 21:51:09:806 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHan msg was = 0
01/16/13 21:51:09:806 | [INFO] | | UPDATER | CORE | | | | 45860 | InstallProgress_MessageHandler_kID_Done : The Update installation requires system reboot and error code is = 0
01/16/13 21:51:09:869 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHandler : Terminating IPC channel for install progress
01/16/13 21:51:09:869 | [INFO] | | UPDATER | CORE | | | | 45860 | ThreadInstallProgressHandler : Releasing IPC Object for install progress
01/16/13 21:51:09:959 | [INFO] | | UPDATER | CORE | | | | 45084 | InstallRequest_MessageHandler_kID_Ack_Finish : Received kID_Ack_Finish packet from Installer sub-system.
01/16/13 21:51:09:959 | [INFO] | | UPDATER | CORE | | | | 45084 | NotifyResultToInstallerSubSystem : Sending packet with id = 9
01/16/13 21:51:10:314 | [INFO] | | UPDATER | CORE | | | | 45084 | InstallRequest_MessageHandler_kID_Done : Received packet kID_Done from Installer sub-system.
01/16/13 21:51:10:314 | [INFO] | | UPDATER | CORE | | | | 45084 | InstallRequest_MessageHandler_kID_Done : ThreadInstallProgressHandler thread is terminated.
01/16/13 21:51:10:314 | [INFO] | | UPDATER | CORE | | | | 45084 | InstallRequest_MessageHandler_kID_Done : Setting state in tracker database to success(7) = AdobeBridgeCS664Bit-5.0/5.0.2
01/16/13 21:51:10:314 | [INFO] | | UPDATER | CORE | | | | 45084 | SetInstallUpdatesInProgressCached : = 0
01/16/13 21:51:10:520 | [INFO] | | UPDATER | CORE | | | | 43524 | SetInstallUpdatesInProgress : = 0
01/16/13 21:51:10:520 | [INFO] | | UPDATER | CORE | | | | 43524 | SetInstallUpdatesInProgressCached : = 0
01/16/13 21:51:10:520 | [INFO] | | UPDATER | CORE | | | | 43524 | UCGetprogress : Updates install returning state for reffId = AdobeBridgeCS664Bit-5.0/5.0.2
01/16/13 21:51:10:520 | [INFO] | | UPDATER | CORE | | | | 43524 | UCGetprogress : Updates install returning state = 46
01/16/13 21:51:10:520 | [INFO] | | UPDATER | CORE | | | | 43524 | UCGetprogress : Updates install returning outError = 0
01/16/13 21:51:10:520 | [INFO] | | UPDATER | CORE | | | | 43524 | UCGetprogress : Updates install returning percent = 100
01/16/13 21:51:10:520 | [INFO] | | UPDATER | CORE | | | | 43524 | UCGetprogress : Updates install returning unique error code string = U46M1P0
01/16/13 21:51:10:520 | [INFO] | | UPDATER | CORE | | | | 43524 | UCGetprogress : Updates install returning Error string =
01/16/13 21:51:17:881 | [INFO] | | UPDATER | CORE | | | | 44168 | Stepped into << UCTerminate >> call.
01/16/13 21:51:17:881 | [INFO] | | UPDATER | CORE | | | | 44168 | EndUpdateInstallerSubsystem : Sent Packet kID_Done to Installer sub-system.
01/16/13 21:51:17:881 | [INFO] | | UPDATER | CORE | | | | 44168 | Entering into <<TerminateUpdaterCoreIPCAndWaitforThread>>.
01/16/13 21:51:17:881 | [INFO] | | UPDATER | CORE | | | | 44168 | TerminateUpdaterCoreIPCAndWaitforThread : Setting both IPC loop control variable to false.
01/16/13 21:51:17:881 | [INFO] | | UPDATER | CORE | | | | 44168 | TerminateUpdaterCoreIPCAndWaitforThread : Waiting for ThreadInstallRequestHandler to complete.
01/16/13 21:51:17:881 | [INFO] | | UPDATER | CORE | | | | 44168 | Stepped into << AdobeUpdaterWaitOnThread >> API
01/16/13 21:51:17:901 | [INFO] | | UPDATER | CORE | | | | 45084 | InstallRequest_MessageHandler_kID_Invalid : GOT kID_Invalid.
01/16/13 21:51:17:951 | [INFO] | | UPDATER | CORE | | | | 45084 | ThreadInstallProgressHandler : Terminating IPC channel for Install control
01/16/13 21:51:17:951 | [INFO] | | UPDATER | CORE | | | | 45084 | ThreadInstallProgressHandler : Releasing IPC Object for Install control
01/16/13 21:51:17:951 | [INFO] | | UPDATER | CORE | | | | 44168 | Returning from << AdobeUpdaterWaitOnThread >> API
01/16/13 21:51:17:951 | [INFO] | | UPDATER | CORE | | | | 44168 | Returning from <<TerminateUpdaterCoreIPCAndWaitforThread>>.
01/16/13 21:51:17:970 | [INFO] | | UPDATER | CORE | | | | 44168 | Returning from << UCTerminate >> call with value = 1
01/16/13 21:51:17:970 | [INFO] | | UPDATER | CORE | | | | 44168 | UpdaterCoreImpl::ShutdownLogFile : Going to call ShutdownESDLogFile()
01/16/13 21:51:17:970 | [INFO] | | UPDATER | CORE | | | | 44168 | <<< Adobe Updater Log End <<<
01/29/13 04:19:35:862 | [INFO] | | UPDATER | CORE | | | | 230580 | >>> Adobe Updater Log Begin >>>
01/29/13 04:19:35:862 | [INFO] | | UPDATER | CORE | | | | 230580 | UpdaterCoreImpl::InitLogFile : Application Version 7.0.0.27
01/29/13 04:19:35:862 | [INFO] | | UPDATER | CORE | | | | 230580 | UpdaterCoreImpl::InitLogFile : cmdline option --> -logFile = C:\Users\klo\AppData\Local\Adobe\AAMUpdater\1.0\aamu.log
01/29/13 04:19:35:862 | [INFO] | | UPDATER | CORE | | | | 230580 | UpdaterCoreImpl::InitLogFile : cmdline option --> -logLevel = 2
01/29/13 04:19:35:863 | [INFO] | | UPDATER | CORE | | | | 230580 | Stepped into << UCInitialize >> call
01/29/13 04:19:35:867 | [INFO] | | UPDATER | CORE | | | | 230580 | UCInitialize : AAM is launched via Updater.
01/29/13 04:19:35:868 | [INFO] | | UPDATER | CORE | | | | 230580 | Stepped into << UCSetUpdateEnginePath >> call
01/29/13 04:19:35:902 | [INFO] | | UPDATER | CORE | | | | 230580 | Returning from << UCSetUpdateEnginePath >> call error = 0 retVal = 1
01/29/13 04:19:35:904 | [INFO] | | UPDATER | CORE | | | | 230580 | Stepped into << UCSetDeploymentEnginePath >> call
01/29/13 04:19:35:910 | [INFO] | | UPDATER | CORE | | | | 230580 | Returning from << UCSetDeploymentEnginePath >> call error = 0 retVal = 1
01/29/13 04:19:35:910 | [INFO] | | UPDATER | CORE | | | | 230580 | Returning from << UCInitialize >> call error = 0 retVal = 1
01/29/13 04:19:36:290 | [INFO] | | UPDATER | CORE | | | | 231268 | Stepped into << UCGetUserPreferences >> call
01/29/13 04:19:36:298 | [INFO] | | UPDATER | CORE | | | | 231268 | Returning from << UCGetUserPreferences >> call error = 0 retVal = 1
01/29/13 04:19:36:304 | [INFO] | | UPDATER | CORE | | | | 229944 | Stepped into << UCCheckForUpdates >> call
01/29/13 04:19:36:368 | [INFO] | | UPDATER | CORE | | | | 229944 | CFU(Webfeed): Query licensing type for LEID = Illustrator-CS6-Win-GM
01/29/13 04:19:36:439 | [INFO] | | UPDATER | CORE | | | | 229944 | A valid perpetual license found for = Illustrator-CS6-Win-GM
01/29/13 04:19:36:441 | [INFO] | | UPDATER | CORE | | | | 229944 | CFU(Webfeed): Patch is meant only for subscription licenses, but client doesn't have a valid subscription license.
01/29/13 04:19:36:441 | [INFO] | | UPDATER | CORE | | | | 229944 | Going in waiting state as following Recommendation is no more valid for this update(license mismatch)
01/29/13 04:19:36:444 | [INFO] | | UPDATER | CORE | | | | 229944 | CFU(Webfeed): Query licensing type for LEID = Dreamweaver-CS6-Win-GM
01/29/13 04:19:36:503 | [INFO] | | UPDATER | CORE | | | | 229944 | A valid perpetual license found for = Dreamweaver-CS6-Win-GM
01/29/13 04:19:36:505 | [INFO] | | UPDATER | CORE | | | | 229944 | CFU(Webfeed): Patch is meant only for subscription licenses, but client doesn't have a valid subscription license.
01/29/13 04:19:36:506 | [INFO] | | UPDATER | CORE | | | | 229944 | CFU(Webfeed): Query licensing type for LEID = Dreamweaver-CS6-Win-GM
01/29/13 04:19:36:562 | [INFO] | | UPDATER | CORE | | | | 229944 | A valid perpetual license found for = Dreamweaver-CS6-Win-GM
01/29/13 04:19:36:564 | [INFO] | | UPDATER | CORE | | | | 229944 | CFU(Webfeed): Patch is meant only for subscription licenses, but client doesn't have a valid subscription license.
01/29/13 04:19:36:565 | [INFO] | | UPDATER | CORE | | | | 229944 | Going in waiting state as following Recommendation is no more valid for this update(license mismatch)
01/29/13 04:19:36:566 | [INFO] | | UPDATER | CORE | | | | 229944 | CFU(Webfeed): Query licensing type for LEID = Bridge-CS6-Win-GM
01/29/13 04:19:36:600 | [INFO] | | UPDATER | CORE | | | | 229944 | No valid license found for = Bridge-CS6-Win-GM
01/29/13 04:19:36:603 | [INFO] | | UPDATER | CORE | | | | 229944 | CFU(Webfeed): Query licensing type for LEID = Photoshop-CS6-Win-GM
01/29/13 04:19:36:676 | [INFO] | | UPDATER | CORE | | | | 229944 | A valid perpetual license found for = Photoshop-CS6-Win-GM
01/29/13 04:19:36:678 | [INFO] | | UPDATER | CORE | | | | 229944 | CFU(Webfeed): Patch is meant only for subscription licenses, but client doesn't have a valid subscription license.
01/29/13 04:19:36:678 | [INFO] | | UPDATER | CORE | | | | 229944 | Going in waiting state as following Recommendation is no more valid for this update(license mismatch)
01/29/13 04:19:36:730 | [INFO] | | UPDATER | CORE | | | | 229944 | SetCFUInProgress : = 1
01/29/13 04:19:36:730 | [INFO] | | UPDATER | CORE | | | | 229944 | Returning from << UCCheckForUpdates >> call error = 0 retVal = 1
01/29/13 04:19:36:732 | [INFO] | | UPDATER | CORE | | | | 230584 | CFU(Webfeed): Downloading WebFeed
01/29/13 04:19:36:762 | [INFO] | | UPDATER | CORE | | | | 230584 | GDEDownloader:: GDEInitialize Successful
01/29/13 04:19:36:769 | [INFO] | | UPDATER | CORE | | | | 230584 | GDEDownloader:: GDEInitDownloader Successful
01/29/13 04:19:36:786 | [INFO] | | UPDATER | CORE | | | | 230584 | GDEDownloader:: GDESetThreadCount Successful
01/29/13 04:19:36:879 | [INFO] | | UPDATER | CORE | | | | 230584 | GDEDownloader:: GDEGetEtag Successful
01/29/13 04:19:36:879 | [INFO] | | UPDATER | CORE | | | | 230584 | CFU(Webfeed): Web feed hasn't changed, so no need to download.
01/29/13 04:19:36:879 | [INFO] | | UPDATER | CORE | | | | 230584 | GDEDownloader:: GDE Closed
01/29/13 04:19:36:880 | [INFO] | | UPDATER | CORE | | | | 230584 | CFU(Webfeed): Webfeed is empty
01/29/13 04:19:36:880 | [INFO] | | UPDATER | CORE | | | | 230584 | CFU(Webfeed): MRL is empty
01/29/13 04:19:37:031 | [INFO] | | UPDATER | CORE | | | | 230672 | SetCFUInProgress : = 0
01/29/13 04:19:37:031 | [INFO] | | UPDATER | CORE | | | | 230672 | SetCFUInProgress : = 0
01/29/13 04:19:37:031 | [INFO] | | UPDATER | CORE | | | | 230672 | Check for Updates was done successfully.
01/29/13 04:19:37:036 | [INFO] | | UPDATER | CORE | | | | 230672 | UCGetprogress : Check for updates returning state for reffId =
01/29/13 04:19:37:037 | [INFO] | | UPDATER | CORE | | | | 230672 | UCGetprogress : Check for updates returning state = 21
01/29/13 04:19:37:037 | [INFO] | | UPDATER | CORE | | | | 230672 | UCGetprogress : Check for updates returning outError = 0
01/29/13 04:19:37:037 | [INFO] | | UPDATER | CORE | | | | 230672 | UCGetprogress : Check for updates returning percent = 0
01/29/13 04:19:37:037 | [INFO] | | UPDATER | CORE | | | | 230672 | UCGetprogress : Check for updates returning unique error code string = U21M1C0
01/29/13 04:19:37:327 | [INFO] | | UPDATER | CORE | | | | 231268 | Stepped into << UCGetUserPreferences >> call
01/29/13 04:19:37:335 | [INFO] | | UPDATER | CORE | | | | 231268 | Returning from << UCGetUserPreferences >> call error = 0 retVal = 1
01/29/13 04:19:37:338 | [INFO] | | UPDATER | CORE | | | | 231268 | Stepped into << UCGetInstalledChannels >> call
01/29/13 04:19:37:384 | [INFO] | | UPDATER | CORE | | | | 231268 | Returning from << UCGetInstalledChannels >> call error = 0 retVal = 1
01/29/13 04:19:37:998 | [INFO] | | UPDATER | CORE | | | | 231268 | Stepped into << UCGetInstalledChannels >> call
01/29/13 04:19:38:044 | [INFO] | | UPDATER | CORE | | | | 231268 | Returning from << UCGetInstalledChannels >> call error = 0 retVal = 1
01/29/13 04:19:38:056 | [INFO] | | UPDATER | CORE | | | | 231268 | Stepped into << UCGetAvailableUpdateStatus >> call
01/29/13 04:19:38:058 | [INFO] | | UPDATER | CORE | | | | 231268 | Returning from << UCGetAvailableUpdateStatus >> call error = 0 retVal = 1
01/29/13 04:19:38:247 | [INFO] | | UPDATER | CORE | | | | 231268 | SetViewedUpdate: The update is waiting for a product event! Not set to viewed.
01/29/13 04:19:38:247 | [INFO] | | UPDATER | CORE | | | | 231268 | SetViewedUpdate: The update is waiting for a product event! Not set to viewed.
01/29/13 04:19:38:248 | [INFO] | | UPDATER | CORE | | | | 231268 | SetViewedUpdate: The update is waiting for a product event! Not set to viewed.
01/29/13 04:19:44:286 | [INFO] | | UPDATER | CORE | | | | 230960 | Stepped into << UCDownloadUpdates >> call
01/29/13 04:19:44:331 | [INFO] | | UPDATER | CORE | | | | 230960 | Stepped into << AdobeUpdaterCreateThread >> API
01/29/13 04:19:44:332 | [INFO] | | UPDATER | CORE | | | | 230960 | Returning from << AdobeUpdaterCreateThread >> API
01/29/13 04:19:44:332 | [INFO] | | UPDATER | CORE | | | | 230960 | StartUpdateInstallerSubsystem : LaunchUpdateInstallerAsAdmin before.
01/29/13 04:19:44:332 | [INFO] | | UPDATER | CORE | | | | 230960 | LaunchUpdateInstallerAsAdmin: UpdateInstaller utility path is : = C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\core\..\UWA\Adobe Application Manager (Updater).exe
01/29/13 04:19:44:332 | [INFO] | | UPDATER | CORE | | | | 230932 | ThreadInstallRequestHandler : Creating new IPC Object for Install control
01/29/13 04:19:44:332 | [INFO] | | UPDATER | CORE | | | | 230932 | ThreadInstallRequestHandler : Initializing IPC channel for Install control
01/29/13 04:19:44:332 | [INFO] | | UPDATER | CORE | | | | 230932 | ThreadInstallRequestHandler : Releasing kSyncUpdaterCoreIPCInitializationWaitKey Lock after IPC Channel.
01/29/13 04:19:44:332 | [INFO] | | UPDATER | CORE | | | | 230932 | ThreadInstallRequestHandler : Acquiring kSyncUpdaterCoreIPCRecvPacketWaitKey Lock before re intializing IPC Channel.
01/29/13 04:19:44:347 | [INFO] | | UPDATER | CORE | | | | 230960 | LaunchUpdateInstallerAsAdmin: sCmdLineArgs1 is : = -mode=productupdate
01/29/13 04:19:44:347 | [INFO] | | UPDATER | CORE | | | | 230960 | LaunchUpdateInstallerAsAdmin: sCmdLineArgs2 is : = -appDataDir=C:\Users\klo\AppData\Local\Adobe\AAMUpdater\1.0
01/29/13 04:19:44:347 | [INFO] | | UPDATER | CORE | | | | 230960 | LaunchUpdateInstallerAsAdmin: sCmdLineArgs3 is : = -deploymentEnginePath=C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\core\..\DECore\Setup.exe
01/29/13 04:19:44:347 | [INFO] | | UPDATER | CORE | | | | 230960 | Stepped into << AdobeUpdaterCreateNewProcess >> API
01/29/13 04:19:44:347 | [INFO] | | UPDATER | CORE | | | | 230960 | AdobeUpdaterCreateNewProcess : About to launch executable at = C
01/29/13 04:19:44:347 | [INFO] | | UPDATER | CORE | | | | 230960 | AdobeUpdaterCreateNewProcess : Working Dir will be = C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\core\..\UWA
01/29/13 04:19:44:381 | [INFO] | | UPDATER | CORE | | | | 230960 | AdobeUpdaterCreateNewProcess : Executable launch was successful.
01/29/13 04:19:44:381 | [INFO] | | UPDATER | CORE | | | | 230960 | Returning from << AdobeUpdaterCreateNewProcess >> API
01/29/13 04:19:44:381 | [INFO] | | UPDATER | CORE | | | | 230960 | LaunchUpdateInstallerAsAdmin: UpdateInstaller launch executed successfully.
01/29/13 04:19:44:381 | [INFO] | | UPDATER | CORE | | | | 230960 | StartUpdateInstallerSubsystem : Releasing kSyncUpdaterCoreIPCRecvPacketWaitKey Lock.
01/29/13 04:19:44:381 | [INFO] | | UPDATER | CORE | | | | 230960 | StartUpdateInstallerSubsystem : Acquiring kSyncUpdaterCoreIPCInitializationWaitKey Lock before intializing IPC Channel.
01/29/13 04:19:44:381 | [INFO] | | UPDATER | CORE | | | | 230960 | StartUpdateInstallerSubsystem : Acquiring kSyncUpdaterCoreIPCAckPacketWaitKey Lock before re intializing IPC Channel.
01/29/13 04:19:44:418 | [INFO] | | UPDATER | CORE | | | | 230932 | InstallRequest_MessageHandler_kID_Ack : Received kID_Ack packet from Installer sub-system.
01/29/13 04:19:44:418 | [INFO] | | UPDATER | CORE | | | | 230932 | NotifyResultToInstallerSubSystem : Sending packet with id = 9
01/29/13 04:19:44:518 | [INFO] | | UPDATER | CORE | | | | 230960 | StartUpdateInstallerSubsystem : Received ACK from Update Installer subsystem for Initialization.
01/29/13 04:19:44:518 | [INFO] | | UPDATER | CORE | | | | 230960 | SetDownloadUpdatesInProgress : = 1
01/29/13 04:19:44:518 | [INFO] | | UPDATER | CORE | | | | 230960 | Returning from << UCDownloadUpdates >> call error = 0 retVal = 1
01/29/13 04:19:44:525 | [INFO] | | UPDATER | CORE | | | | 230752 | ThreadDownloadUpdates: Downloading installer for update refID: AdobeBridgeCS6-5.0/5.0.2
01/29/13 04:19:44:526 | [INFO] | | UPDATER | CORE | | | | 230752 | getValidationType: Going for Code signing check for the downloaded installer
01/29/13 04:19:44:546 | [INFO] | | UPDATER | CORE | | | | 230752 | ThreadDownloadUpdates:: Initializing Download
01/29/13 04:19:44:548 | [INFO] | | UPDATER | CORE | | | | 230752 | GDEDownloader:: GDEInitialize Successful
01/29/13 04:19:44:562 | [INFO] | | UPDATER | CORE | | | | 230752 | GDEDownloader:: GDEInitDownloader Successful
01/29/13 04:19:44:651 | [INFO] | | UPDATER | CORE | | | | 230752 | GDEDownloader:: GDEGetFileSize Successful
01/29/13 04:19:44:651 | [INFO] | | UPDATER | CORE | | | | 230752 | ThreadDownloadUpdates:: Starting Download
01/29/13 04:19:44:773 | [INFO] | | UPDATER | CORE | | | | 230752 | GDEDownloader:: Download Successfully Started
01/29/13 04:21:00:582 | [INFO] | | UPDATER | CORE | | | | 230752 | ThreadDownloadUpdates:: Download Complete
01/29/13 04:21:00:582 | [INFO] | | UPDATER | CORE | | | | 230752 | GDEDownloader:: GDE Closed
01/29/13 04:21:00:585 | [INFO] | | UPDATER | CORE | | | | 230752 | DoValidation: Going for Code signing check for the downloaded installer
01/29/13 04:21:01:474 | [INFO] | | UPDATER | CORE | | | | 230752 | ThreadDownloadUpdates: Validation for the downloaded Installer: PASSED
01/29/13 04:21:01:689 | [INFO] | | UPDATER | CORE | | | | 230672 | SetDownloadUpdatesInProgress : = 0
01/29/13 04:21:01:689 | [INFO] | | UPDATER | CORE | | | | 230672 | SetDownloadUpdatesInProgress : = 0
01/29/13 04:21:01:689 | [INFO] | | UPDATER | CORE | | | | 230672 | UCGetprogress : (B) Download thread is completed and is closed successfully.
01/29/13 04:21:01:806 | [INFO] | | UPDATER | CORE | | | | 230672 | UCGetprogress : Updates download returning state for reffId = AdobeBridgeCS6-5.0/5.0.2
01/29/13 04:21:01:806 | [INFO] | | UPDATER | CORE | | | | 230672 | UCGetprogress : Updates download returning state = 22
01/29/13 04:21:01:806 | [INFO] | | UPDATER | CORE | | | | 230672 | UCGetprogress : Updates download returning outError = 0
01/29/13 04:21:01:806 | [INFO] | | UPDATER | CORE | | | | 230672 | UCGetprogress : Updates download returning percent = 100
01/29/13 04:21:01:806 | [INFO] | | UPDATER | CORE | | | | 230672 | UCGetprogress : Updates download returning unique error code string = U22M1D0
01/29/13 04:21:01:847 | [INFO] | | UPDATER | CORE | | | | 231268 | UCIsSelfUpdateAvailable : Function returned with value => = 0
01/29/13 04:21:01:847 | [INFO] | | UPDATER | CORE | | | | 231268 | UCIsSelfUpdateAvailable : Is BOB downloaded => = 0
01/29/13 04:21:01:860 | [INFO] | | UPDATER | CORE | | | | 230788 | Stepped into << UCInstallUpdates >> call
01/29/13 04:21:01:861 | [INFO] | | UPDATER | CORE | | | | 230788 | UCIsSelfUpdateAvailable : Function returned with value => = 0
01/29/13 04:21:01:861 | [INFO] | | UPDATER | CORE | | | | 230788 | UCIsSelfUpdateAvailable : Is BOB downloaded => = 0
01/29/13 04:21:01:861 | [INFO] | | UPDATER | CORE | | | | 230788 | UCInstallUpdates : (B) UCIsSelfUpdateAvailable API returned value = 0
01/29/13 04:21:01:863 | [INFO] | | UPDATER | CORE | | | | 230788 | UCIsCurrentPatchRIBSBased : inside
01/29/13 04:21:01:867 | [INFO] | | UPDATER | CORE | | | | 230788 | UCIsCurrentPatchRIBSBased : Function returned with value => = 1
01/29/13 04:21:01:867 | [INFO] | | UPDATER | CORE | | | | 230788 | UCIsSelfUpdateAvailable : IsRIBSBasedpatch => = 1
01/29/13 04:21:01:867 | [INFO] | | UPDATER | CORE | | | | 230788 | SetInstallUpdatesInProgress : = 1
01/29/13 04:21:01:867 | [INFO] | | UPDATER | CORE | | | | 230788 | SetInstallUpdatesInProgressCached : = 1
01/29/13 04:21:01:867 | [INFO] | | UPDATER | CORE | | | | 230788 | UCInstallUpdates : Sending install request to Update Installer for reffID = -reffIDs=AdobeBridgeCS6-5.0/5.0.2
01/29/13 04:21:01:888 | [INFO] | | UPDATER | CORE | | | | 230788 | Returning from << UCInstallUpdates >> call error = 0 retVal = 1
01/29/13 04:21:02:454 | [INFO] | | UPDATER | CORE | | | | 230932 | InstallRequest_MessageHandler_kID_Progress : Received UNPACKING progress percent = = 3
01/29/13 04:21:02:994 | [INFO] | | UPDATER | CORE | | | | 230932 | InstallRequest_MessageHandler_kID_SwitchPipe : UpdateRefID = AdobeBridgeCS6-5.0/5.0.2|Adobe Bridge CS6 5.0.2 Update
01/29/13 04:21:02:994 | [INFO] | | UPDATER | CORE | | | | 230932 | InstallRequest_MessageHandler_kID_SwitchPipe : Last UNPACKING percent (after switch) till any further progress = = 13
01/29/13 04:21:02:994 | [INFO] | | UPDATER | CORE | | | | 230932 | Stepped into << AdobeUpdaterCreateThread >> API
01/29/13 04:21:02:994 | [INFO] | | UPDATER | CORE | | | | 230932 | Returning from << AdobeUpdaterCreateThread >> API
01/29/13 04:21:02:994 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHandler : Creating new IPC Object for Progress for install progress
01/29/13 04:21:02:994 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHandler : Initializing IPC channel for install progress
01/29/13 04:21:02:994 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHandler : doContinue = 1
01/29/13 04:21:02:994 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 10
01/29/13 04:21:02:994 | [INFO] | | UPDATER | CORE | | | | 230804 | InstallProgress_MessageHandler_kID_Invalid : Got kID_Invalid packets.
01/29/13 04:21:03:004 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 10
01/29/13 04:21:03:014 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 10
01/29/13 04:21:03:024 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 10
01/29/13 04:21:03:034 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 10
01/29/13 04:21:03:044 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 10
01/29/13 04:21:03:054 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 10
01/29/13 04:21:03:064 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 10
01/29/13 04:21:03:074 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 10
01/29/13 04:21:03:084 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 10
01/29/13 04:21:03:094 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 10
01/29/13 04:21:03:104 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 10
01/29/13 04:21:03:114 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 10
01/29/13 04:21:03:124 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 10
01/29/13 04:21:03:134 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 8
01/29/13 04:21:03:134 | [INFO] | | UPDATER | CORE | | | | 230804 | InstallProgress_MessageHandler_kID_Progress : Received kID_Progress packet and the progress percent is = 13
01/29/13 04:21:03:136 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 6
01/29/13 04:21:08:662 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 6
01/29/13 04:21:15:190 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 6
01/29/13 04:21:21:255 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 6
01/29/13 04:21:21:397 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 0
01/29/13 04:21:22:303 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 6
01/29/13 04:21:22:531 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 0
01/29/13 04:21:23:454 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 6
01/29/13 04:21:24:355 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 6
01/29/13 04:21:25:355 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 6
01/29/13 04:21:25:355 | [INFO] | | UPDATER | CORE | | | | 230804 | InstallProgress_MessageHandler_kID_Progress : Received kID_Progress packet and the progress percent is = 97
01/29/13 04:21:26:355 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 6
01/29/13 04:21:27:355 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 6
01/29/13 04:21:28:255 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 6
01/29/13 04:21:29:175 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 6
01/29/13 04:21:29:182 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 0
01/29/13 04:21:30:182 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 0
01/29/13 04:21:31:182 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 0
01/29/13 04:21:31:182 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallProgressHan msg was = 0
01/29/13 04:21:31:182 | [INFO] | | UPDATER | CORE | | | | 230804 | InstallProgress_MessageHandler_kID_RequestRestart : Received kID_RequestRestart packet from Switched pipe with errcode . = 0
01/29/13 04:21:31:192 | [INFO] | | UPDATER | CORE | | | | 230804 | ThreadInstallhello there. You have probably already fixed whatever it was that was interfering, and I admit I didn't read all of the info that followed your post, but I have run into a few files that seem to be suspicious that could be part of the problem. I was getting all sorts of weird issues from my new cloud subscriptions, and I eventually began to wonder if I had been infected with some sort of malware or virus. I still don't know, but I came across a weird file path that contained MANY strange files. One of them was Adobe Application Manager (Updater).exe, and I THINK, I am not sure, that this could be a file that is causing problems (as well as some of the other within that path address. On my computer it is:
C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\ (for the file mentioned above it is C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\UWA. I have this program that I use called PEStudio that allows me to view the contents of executables without actually running or opening them. I have found this to be a very useful, and free, tool for researching malicious files. When I opened the file I mentioned, there was a treasure trove of suspicious "strings" as well as others. It actually identifies some of the strings as "blacklisted" so that you can view those strings first. It also runs blacklists on other parts of the files so it has proved to be very useful (even if you aren't a techie per se).
Anyway, I hope this helps if you are still having trouble. -
Unable to install Lion Recovery Update v1.0 on Mac OS 10.8.2
Hi to anyone who can help,
As the "Find My Mac" option is greyed out, I followed all the instructions on the support forums on how to get this feature, such as Verify/Repair Machintosh HD using Disk Ultilty from the Recovery partition.
Subsequently I tried to install Lion Recovery Update v1.0 from the Apple Support link below:
http://support.apple.com/kb/DL1464
However, while attempting to install, it says "This update can only be installed on OS 10.7". How do I get this fixed?
Some background info, my MacBook Pro 15" (early 2011) had a replacement Hard Disk Drive and Logic Board.
1. The replacement drive had 10.7.4 installed, and I used the recovery partition to restore to a Time Machine Backup (which was 10.8.2).
2. Do I need to "download" the Mountain Lion package in the app store again? I see it as an available to download instead of saying "Installed".Exit Code 6 is a generic error that indicates that the installation was not successful.
Have a look at the following document: http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
A quick look at the error log, indicates a permission issues. Are you logged in with an Administrator account and have sufficient privileges to install software? -
I've installed a system update as requested, 10.6.7 but mail is not working now.
I've installed a system update yesterday as requested, all software works fine, except Mail - I get the following message You have mail version 4.5 (1084/1082), it cant be used on Max OSX Version 10.6.7 (Build 10J869). I've done a complete reinstall of my imac too, but this has not cleared the problem.
Please helpPlease do this:
Repair the Hard Drive and Permissions
Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and quit the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Upon satisfactory completion boot from your Snow Leopard DVD and resinstall Snow Leopard. Upon completion you may wish to update it to Mac OS X 10.6.8 Update Combo v1.1.
Maybe you are looking for
-
New email in IMAP inbox doesn't show up in Mail.app - must quit & relaunch
I have a 24" iMac 2.33GHz running OS 10.5.7, with several user accounts on the machine. on my account (the main admin account), Mail seems to work just fine. but on a couple other accounts, although Mail.app correctly shows new IMAP email in the inbo
-
JSAPI - other languages than English; MIDlet - settings loading; JSAPI - al
Hello! I need to create application which uses speech recognition. At first I thought about using CMU Sphinx (PocketSphinx or, possibly, Sphinx4). Later I thought about JSAPI. (Sphinx somehow uses JSAPI but I don't know what is the difference between
-
Recently my 4-yr-old 24" iMac has been having USB issues. The only peripherals it will see are the mouse and keyboard (and a printer if it is plugged into the keyboard). Nothing else plugged into the USB ports is recognized - no iPhone, no printer, n
-
Problem on 10gr2 for configure HS talk to mysql through ODBC
Hello, all, did someone tried configure HS on 10gr2 talk to mysql 3.5 on xp? I tried it on my environment and got some issues here. any advice will be appreciated: 1) environment: OS=xp professional sp2. oracle database=10gr2. mysql database=mysql 3.
-
I've had some strange problems in booting my iBook. When I first turn the computer on, it makes the startup chime and the "loading Mac OSX" screen appears, but then it turns into a plain blue screen. After a minute or so, a text-only screen appears,