Repairing Port 80 after enabling QTSS

I was tinkering around with setting up QTSS on my OSX Server (10.6) and I stupidly clicked on the use Port:80 checkbox. This broke the Web Service on my server. Sadly... Apple did not seem to code anything so that unchecking the box returns port 80 to how it was setup before.
/etc/services seems fine. The /etc/apache/htpd.conf seems unchanged... I can't seem to figure out what was changed...
Any help would be greatly appreciated. I really don't want to have to re-install for such a simple issue. I have tried hunting down changed files on the system but nothing is coming up.

Answer/Fix: When in doubt, reboot.
We'll it seems like if you un-check the box and save your settings then everything is fixed. But you must reboot the server. Restarting QTSS and Apache isn't enough...

Similar Messages

Macbook pro does not boot after enabling Filevault

macbook pro with OS 10.9.2 : after enabling encryption ran in to a problem and did not startup.
did the followings:
- loaded to recovery mode: command-R
- disk utility- verify disk> repair disk
- tried to reinstall OS : did not work
- re-partitioned the hard drive
- tried to install it from bootable Mac os installation : it worked but after running the software update it did not start up again....
- sent the mac to repair store to replace the hard drive with SSD hard : they setup the hard with mac os 10.9.5
- installed all the software update
- enabled the file-vault " this time it finished the encryption but when started up and tried to login with user account it got frozen and did not work and so on ...
- again tried to go to recovery mod and repair the hard and reinstall OS but it did not install the OS
- had to again repartition the hard ...
PS: the macbook loads fine with the OS on External hard disk .
this is really frustrating, can somebody tell me what's wrong with this mac why this issue happens after enabling encryption and why the issue is not gone even after reformatting the partition...

I finally fixed the issue myself
The macbook had a RAM issue: Replaced the RAM and it is fine now.

HT1478 i get a message when trying to sync..."requried disk cannot be found" even after enableing disk use

i get a message when trying to sync..."requried disk cannot be found" even after enableing disk use

First make sure you are using the most up to date version of iTunes and have all the latest Windows updates/patches installed on your PC. From there, try again and if still no luck, make sure you are plugging your iPod into a high powered USB 2.0 port.
Otherwise try these steps:
1. Run “c:\WINDOWS\system32\devmgmt.msc” (i.e. *Device Manager*), and leave it open for now for later use
2. Start up iTunes
3. Next, connect your iPod.
4. Go to your iPod Settings and select the “Enable disk use” option from under theSummary tab.
5. A dialog box will pop up reminding you that you’ll need to manually eject. Go ahead and hit OK
6. Hit Apply to save changes to the iPod
7. Quickly switch to the Device Manager window and right-click on any item within the window and select “Scan for hardware changes”
8. Finally, switch back to iTunes, and try re-syncing your iPod to see if it helped.
It might not also hurt to trash your iPod's Photo cache if it has one (i.e. you sync photos to the iPod). See this article for information on where to find this folder on your Windows XP machine.
http://support.apple.com/kb/TS1314
B-rock

Single Sign-On:orasso Status Down After Enabling SSL

The status of Single Sign-On:orasso is listed as down in Enterprise Manager after enabling SSL. The same problem existed in with the Portal component, but this was fixed by adding a certificate to the certdb.txt file and by changing some URLs in the targets.xml file.
Does anyone know how to correct this issue with Enterprise Manager? It has no effect on the behavior of our application, but it is causing problems with administration because some people use the Enterprise Manager console to monintor the state of our environment.

Hi,
Did U try this the following steps;
When the configuration is finished, take the following steps:
1.
In the Application Server Control Console Confirmation page, click OK. The Application Server Home page appears.
2.
If you did not have an OC4J_SECURITY instance before, you will have one now. The OC4J_SECURITY instance will have a status of Down. You will also have a Single Sign-On:orasso instance with a status of Down. Select the check box next to OC4J_SECURITY and click Start.
Note: You cannot start the Single Sign-On:orasso instance. This feature is started and stopped when you start and stop HTTP_Server and OC4J_SECURITY.
3.
When the operation completes, verify that OC4J_SECURITY has a status of Up.
Note: The Single Sign-On:orasso status may be displayed as Down. This is normal. The status should be updated approximately five minutes after configuration.
4.
Select HTTP_Server and click Restart.
5.
Verify that you can access OracleAS Single Sign-On at the following URL:
http://hostname.domain:port/pls/orasso
In the URL, hostname.domain is the host on which OracleAS Single Sign-On is installed and port is the Infrastructure HTTP Server port.
You can log in as orcladmin with the orcladmin password.
Also try to check Oracle Application Server Single Sign-On Administrator's Guide
Hear from U & regards,
Hamdy

Mac OS X 10.7 Recovery OS used too soon after enabling FiileVault 2

For reference only
http://pastebin.com/Jy6RvBXf
If you use Recovery OS Disk Utility, or any comparable utility, too soon after enabling FileVault 2 — before entering a passphrase at the EFI loginwindow — then without a prompt to unlock the volume, an attempt to verify or repair may produce a report such as the one below.
Verifying volume “a”
Checking storage systemChecking volume.
disk1: Scan for Volume Headers
Invalid Volume Header @ 0: incorrect block type
Invalid Volume Header @ 58855587328: invalid field value
disk1 is not a CoreStorage volume
Error: Storage system verify or repair failed.
Also, the required startup volume may not be listed for startup purposes.
In this situation: do not be alarmed by the report.
Restart the system. At the EFI loginwindow, which should appear within seconds of the startup chime, enter the passphrase.

Step one is to ensure that you have a bootable backup/clone or a verified Time Machine backup of 10.7.3.
Step two is to manually download and install the 10.7.3 COMBO update.
Step three, if these are successful, is to manually download and install the 10.7.4 COMBO update, repair permissions, and restart.
These should fix the problem with the installer. As for the games, i've not a clue since I don't run any on my computers.

Freeze during boot after enabling Hyper-V feature in Windows 8

Good day.
I'm using AMD FX 8320 with 990FXA-GD65. After enabling hyper-v my pc freezing during boot. Google told me that it might be issue with USB 3.0 controller, so i disabled it in bios, but result still the same.
Can you please tell me where should i look at?

Hi,
Please try to boot into WinRE and run the Startup Repair option.
Generally speaking, when you add feature like Hyper-V, system would take a long time to get this feature configured. if your computer still stay updates configuration steps, you can use Windows 8.1 installation image to repair system. In system repair mode,
you can access into Command Prompt mode, and check CBS.log under C:\Windows\logs\CBS.
This log file would record Windows installation process, we may find the problem of Hyper-V installation.
Kate Li
TechNet Community Support

Error installing Adobe Flash 11 "launchfail" after enable AppLocker

Error installing Adobe Flash 11 "launchfail" after enable AppLocker please help. I have allow everyone from publisher for .exe and .msi

I'll ask around, but I don't have any experience with AppLocker. Have you gone through all of the documentation here?
http://technet.microsoft.com/en-us/library/dd723678(v=ws.10).aspx

Open Directory: After enabling of SSL encryption the Open Directory server is not reachable anymore! What's wrong?

After enabling of SSL encrypton on LDAP I can't connect anymore to the LDAB. I think the Lions Server supports now the SSL encrypton for Open Directory.

.....

After enabling cellular data, i am receiving mails even if disable "use cellular data for mail", due to this data usage usage use is more, if we have fix please let me know

Phone Model and OS
Model - iphone 5
IOS 8.0.2
Problem Description
After enabling cellular data, i am receiving mails even if we disable "use cellular data for mail", due to this data usage usage use is more, if we have fix please let me know.
Steps:
1. Enable Cellular Data
2. Disable mail on "use cellular data for mail
3. check whether mail is received or not
tried multiple times and i am getting more billing amount because of data usage

Mail isn't the only app using data. Turning it off there has no effect whatsoever on whether the rest of iOS or other apps you have installed. In fact most apps use data these days, at a minimum for Notifications and often for gameplay and other features.

Dbwr consuming high CPU after enabling DirectIO

Hi,
DBWR is consuming high CPU. After enabling DirectIO on Solaris SPARC 10, dbwr is eating away almost 1 CPU on a v440 machine i.e. 19% throughout the day. Neither of "buffer busy waits" or "write complete waits" or "free buffer waits" are in the top 5 wait events, which, to me, means that there is no buffer contention.
What I understand is that after enabling DirectIO, it takes longer for the IO to complete because pre-DirectIO it would return from the file system cache whereas now it has to return from the disk (and I do see at the OS level that IO has become slow), but should that result in dbwr consuming more CPU?
Infact after enabling DirectIO, IO has become very slow which is another problem and as a result log file writes have also become slow which is a 3rd problem. btw, I am aware that if there were many FTS, then DirectIO can make the system slow but there are no FTS in my case. Also, that SGA should be increased after enabling DirectIO, which has also been done.
Thanks

user12022918 wrote:
DBWR is consuming high CPU. After enabling DirectIO on Solaris SPARC 10, dbwr is eating away almost 1 CPU on a v440 machine i.e. 19% throughout the day. 19% is less than 1/5th of a CPU. Or are you referring to a 100% being all 4 CPUs?
What I understand is that after enabling DirectIO, it takes longer for the IO to complete because pre-DirectIO it would return from the file system cache whereas now it has to return from the disk Incorrect. See directio for details.
Yes, removing the file system cache from the I/O layer for a device can reduce I/O performance if the caller does not perform its own caching. However, direct I/O will eliminate the system cache overheads (and associated CPU resources needed) from a caller (like Oracle) that implements its own sophisticated buffer cache.
Direct I/O should therefore increase Oracle I/O performance and decrease resource footprint as it eliminates the need for the kernel to maintain a cache for that device.
Infact after enabling DirectIO, IO has become very slow which is another problem and as a result log file writes have also become slow which is a 3rd problem. Direct I/O, as per the Sun docs, is an advisory call. It may not place that device in direct I/O modes. It may result in partial direct I/O. So you need to make sure exactly what happens and how successful (partial or complete) this setting was.
btw, I am aware that if there were many FTS, then DirectIO can make the system slow but there are no FTS in my case. FTS (multi block reads/large sequential reads) is slower? This is contrary to Sun's docs that state:
Large sequential I/O generally performs best with DIRECTIO_ON, except when a file is sparse or is being extended and is opened with O_SYNC or O_DSYNC.

After enabling iCloud, the calendar on my MacBook shows a window stating "moving calendar to server account. Then a box appears saying "server responded with an error message 403. Then another box shows "couldn't move calendar to iCloud, an error occurrre

After enabling iCloud, the calendar on my MacBook shows a window stating "moving calendar to server account. Then a box appears saying "server responded with an error message 403. Then another box shows "couldn't move calendar to iCloud, an error occurrre

iCloud's Calendar is full of errors and problems for me. The "Couldn't move your calendars to iCloud because an error occurred" is now gone (by itself) but nothing syncs between my Mac's Calendar to iCloud or my iPhone to iCloud.
I tried creating a new event directly on iCloud.com to see whether it pushes to any of my device and got this "This event couldn't be created because of a server error; please try again." error.
Apple, please fix this!!

Accounts getting disabled after enabling password expiration on BOXI R2 SP2

Hi All,
We have a strange issue with our production environment.After enabling password expiration on the enterprise some accounts got disabled,on further investigation I found that these users were either trying to log on to Designer or 2 tier Deski.
I made them login through the Infoview to fix the issue.These users were Universe deginer or report writers.
Any Suggestions

Hi Tim,
These accounts are Enterprise accounts,according to the users they were not given a chance and they never got any prompt for the password change it was disabled directly at the first login.
These people were trying to logon using the Desginer or 2 Tier DESKI login and they are the members of the Administrtor Group also.
Is it important to logon to infoview or 3 tier DESKI to change your password?
I have no answer to give them why there accounts were disabled.
Please suggest
Thanks,
Arun

UPnP doesn't work after enabling Hyper-V role on WS2012R2

Hi,
We have stream/media player which use File share on WS2012 R2. It uses UPnP protocol to connect on File Share and it works fine. But, after enabling Hyper-V role on that server machine, stream/media player can't connect anymore on network share, cannot see
any network computer, I would say master browser service is corrupted.
Do you have advice, how to use UPnP on server with enabled Hyper-V role and virtual network adapter?
Thank you in advance

Have you tried doing things in the opposite sequence? Try first installing and configuring Hyper-V and the virtual switches you will be using. Then install the media player. Maybe the media player is losing track of things when its underlying
network is changed.
Of course, Microsoft does not recommend this configuration. It does not recommend running any other service on a host that is running Hyper-V. That does not immediately imply it will not work; just passing on that what you are doing is a non-recommended
configuration.
. : | : . : | : . tim

Getting error after enabling the Transaction in SSIS package in Windows Server 2008 R2 Standard machine

Hi,
I created a package with "Execute SQL Task and Data Flow Task". I am able to execute successfully in my server having
"Windows Server 2008 R2 Standard" Operating System.
But after enabling the Transaction in my SSIS Package I am not able to execute it. It is giving error. The same package is running in my local machine with Transaction enabled on
Windows 7 Operation System.
The error which I got in my server after enabling the Transaction is
"The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D025
"The partner transaction manager has disabled its support for remote/network transactions.". End Error "
I search with this error message in google and found some solutions in the following links
http://social.msdn.microsoft.com/Forums/en-US/7172223f-acbe-4472-8cdf-feec80fd2e64/the-partner-transaction-manager-has-disabled-its-support-for-remotenetwork-transactions
http://technet.microsoft.com/en-us/library/cc753510(WS.10).aspx
http://support.microsoft.com/kb/817064
But none of the above solution is not working. Kindly help me to resolve this issue.
Thanks in Advance.
Sridhar

Hi Sridhar,
Please compare the DTS settings on the Windows 7 computer and the Windows Server 2008 R2 computer and make sure they are identical. Make sure the “Allow Inbound” and “Allow Outbound” options are check, and pay attention to the authentication mode as
well.
Besides, make sure both Distributed Transaction Coordinator (TCP-In) and Distributed Transaction Coordinator (TCP-Out) rules in Firewall are enabled.
If the issue persists and there are any security/anti-virus software, temporarily disable the security/anti-virus software and check the issue again.
Regards,
Mike Yin
TechNet Community Support

Result_cache_max_sizeis 0 after enabling AMM

I am using. Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production. After enabling AMM, the result_cache_max_size has become 0.
SELECT dbms_result_cache.status() FROM dual; Returns "BYPASS"
Following change was done to enable AMM.
ALTER SYSTEM SET MEMORY_MAX_TARGET = 17000M SCOPE = SPFILE;
ALTER SYSTEM SET MEMORY_TARGET = 17000M SCOPE = SPFILE;
ALTER SYSTEM SET SGA_TARGET =0 SCOPE = SPFILE;
ALTER SYSTEM SET PGA_AGGREGATE_TARGET = 0 SCOPE = SPFILE;
ALTER SYSTEM SET SGA_MAX_SIZE = 0 SCOPE = SPFILE;"
Note: shared_pool_size is 0.
I want to under how result_cache_max_size became 0 after moving to AMM. Does this mean result cache feature is disabled?

result_cache_max_size =0 means it is disabled.

Repairing Port 80 after enabling QTSS

Similar Messages

Maybe you are looking for