Repairing premissions/ disk utility ????? how do I fix this...

Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
68 %)
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
Volume Header needs minor repair
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
I don't understand how to fix this, or what to do....I am still very new to mac.
thanks for your help in advance....
Chris

To repair a volume, you will need to boot from the install DVDs that came with your Mac. You cannot repair the disks that you have booted from.
Insert the DVD and hold down the "C" key while booting. Once you see the desktop, open the Disk Utility located at HD -> Applications -> Utilities and highlight the internal HD, then select "repair disk" in that window near the bottom right. Do not bother verifying the disk as that takes almost as long as repairing and only tells you that the disk needs repairing - which you already know.

Similar Messages

I have problem to read my HDD, but it appears on Disk utility how can I fix it Please?

Hello, How are you and thanks for your time to review my question. it's been like 8 months my Macbook pro stop reading my 1TB HDD but I have noticed that I can read Flash Drive. whenever I connect the HDD to the computer and I Check on Disk utility it appears but not on my desktop. I have connected the HDD on several computers and it's working perfectly. Please help me solve this issue.

Sorry I didn't notice that the pictures weren't inserted
I did click on mount and I have this message I'm going to run first aid and see if it would work
Yeah it has been eight months. the problem is that i had an HDD before that one it stops working because of a fall and obviously that one didn't work on my computer and neither on others so I bought a new onethat has no defect since it works perfectly on other computers Mac and PC but doesn't show up on mind I can't access my files like I told you previously and the funny fact for me is that DU can see i have a disk connected.
PS: i did run first aid ----> verify disk---> Repair----> and try to mount again-----> but same mount failed result
Sig Really appreciate your attention to my case, hopefully there's a solution.

HT203176 My start up disk (10.6.8 ver) has errors and I do not have the OSX install disk. How can I fix this and repair the disk?

Start up disk needs repaired. Repair Disk button is not available in disk utility and I do not have the OS install disk as recommended to fix. Any suggestions?

You have two choices, either get a replacement install DVD for your Mac ( best choice) or make another disk a system disk.
Option 1 call Apple and request a replacement install DVD for you Mac. They will charge you a nominal fee for shipping and handling. You really should have that because it is considered part of your Mac.
Option 2 This one depends on exactly what kind of errors you have on the disk.
If the data is recoverable, you can clone to the other drive.
If not, then you are in trouble and need the install DVD to install an operating system.
Allan

Disk error - How do I fix this?

I was running Onyx, and while verifying the HDD, it told me I had an error on the startup disk and needed to run Disk Utility off of the CD to fix it. I ran the utility while in OSX (not the CD) and it says this:
Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
Volume Header needs minor repair
The volume Macintosh HD needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
I do not want to mess anything up. I have heard the Disk Utility on the CD/DvD is either old or has problems. SO i just need to know for sure how to fix this.
Thanks for the help!
MacBook Pro Mac OS X (10.4.9)

As long as it is a MacBook Pro labelled DVD analyzing a MacBook Pro, Disk Utility should be fine as far as analyzing basic directory structure issues with the Repair Disk and Verify Disk functions. I say basic, because Alsoft Disk Warrior when it repairs the disk directory is much more thorough in its efforts to construct a brand new directory to replace one which is damaged than Disk Utility or fsck. Regardless of the method used, directory damage can have the same symptoms as a dying hard drive. Even a modern MacBook Pro is not immune from its drive dying quickly. And since repairing the directory is a much more invasive routine than pure data recovery, I only recommend fixing the directory on a machine that has been backed up, or you have at least attempted a data recovery with Prosoft Data Rescue.

PS Elements 3.0 can not reinstall/repair with original cd. how can i fix this?

i am trying to repair Photoshop Elements 3.0 by reinstalling it. The computer is launching the home page off of the CD and allowed me to install Adobe Reader 6.0. When I tried to install Adobe Photoshop Elements 3.0 from the same home page I get the pop up box: ADOBE PHOTOSHOP ELEMENTS 3.0 INSTALLER INFOR... Please insert the disk: 1 OK / CANCEL. the disk is already in the drive so i click OK and i can hear it running but then i get the same pop up box asking to insert the disk. i have opened the drive and closed the drive but that didnt help. i have opened the files and tried to manually run the setup.exe but i still get the pop up box asking to insert the disk. How can I reinstall/repair my PS Elements 3.0 without the disk? ( I also updated to 3.0.1 and this didnt help)

if the disk wasnt reading for a repair/reinstall will it read for a regular install?
if i uninstall and reinstall will i loose all of my tags?

My iPod won't sync music due to a disk error, how do I fix this?

I just got a new iPod 4G and it won't sync any of my music or apps. I really don't need anything else on my iPod so I have everything else unchecked. I have tried a system restore and to reset all settings but nothing works. I also have tried deleting the Photo cache folder and that didn't help either. I am going on a trip in less then a week and I would really like my iPod to be working for that trip. Please help!! Thank you in advance.

I just got off the phone with senior level support at apple. There are two things she had me do to fix this problem.
1. Uninstall itunes and then re-install version 10.7 from the apple website here: http://www.apple.com/itunes/
2. Then go here: http://support.apple.com/kb/dl837, this will take you to the Quick-time version 7.7.3 for Windows page, download & install this version. You will need to reboot after this install and once you have finished you should have no problems opening Itunes.

I'm suddenly getting the message "Your iPhone cannot be synced. The required disk cannot be found." What disk? How do I fix this?

I have an iPhone 4 and it's running iOS 5.0.1. I don't know what disk it's talking about, thus I have no way of searching for it.

Try to Reset your device. It might help and is very simple to do.
Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off option that shows up first).

How do I undo BC Partition repair in disk utility?

Here's the summary:
8-core MacPro2,1 running 10.6.8, Paragon NTFS for Mac, Bootcamp Win7.
4 internal HDD drives: two 1.5TBs for data, one 1TB for MacOS, one 1.5TB for Win7 bootcamp.
I mostly use the Mac side for music production (but rarely), and the Win side for business and everything else. Scores and scores of Win apps installed over the years. [4 monitor system], well over 500K files on the drive.
I just backed up the data from the two data-only drives, and made a bootable clone of the MacOS drive (SuperDuper). I have never successfully been able to clone the Win7 Bootcamp NTFS drive (even with Winclone back in 2009) because of volume sizes (or something). I decided to try again, from WITHIN Windows this time (all other attempts were from the Mac OS side).
I bought, downloaded, and installed Acronis True image from within the Win7 bootcamp system. [I obviously did not know that it was gonna modify my MBR, and I had no idea at the time that the GPT and MBR areas were somehow 'mingled' on a bootcamp drive.]
So, when I performed the Acronis-requested reboot (my default boot is into the Bootcamp/Win7 drive), it failed to boot and requested some Windows recovery media or something. I was concerned that anything i put in the DVD drive would sabotage my priceless (in retrospect) stable/optimized Win7 bootcamp system. So, i just hard-powered down the Mac and tried to restart.
I did the Alt/option key, and i was presented with the Mac or Win drive icons. I selected Win, and then I got a different boot error message--'no MBR found'.
But this time i realized that Acronis had stepped where it shouldn't have, and I figured the Mac side could fix the boot problem (maybe with bootcamp assistant or something).
If i had stopped THERE, and searched the forums i could have found how to fix THAT problem--that has been answered tons of times…
But, instead, i went to Disk Utility and asked it to repair my Bootcamp partition (I have Paragon NTFS and it has worked for years, and so I did not have a reason to doubt Disk Utility's ability to Repair an NTFS volume--not that i have tried it before, of course).
Disk Utility repair ran for about 10-15 minutes and said it fixed about 10-20 things.
The drive information (in the side bar and below) still had the BOOTCAMP partition, reported that it was NTFS, said that there was 308 GB still available of the 1.5TB drive, and that it contained 1.19TB 'used'. Looked normal to me.
I closed Disk Utility and then opened a Finder window to see if DU left any 'artifacts' of its 'fixes' on the BOOTCAMP partition, and all the files were gone! Even though DU said it had 1.19TB 'used', all of my files are gone. [I rebooted also, to verify that it was not some 'delayed reporting' issue.]
When I enable 'hidden files' to show, what I get on the Bootcamp partition are these three entries:
.DS_Store (16KB), .fseventsd folder (with a 1KB UUID file inside it), and a .Trashes folder with zero KB.
At this point, I panic and assume the position of despair. There is no 'undo' key for the D/U that I can find. I do an orderly shut down of the system, physically remove the Win7 BC drive, and make/verify a sector-by-sector clone of the drive (on a Win7 laptop, using Acronis--22 hours).
In Win7 Disk Management, the GPT partition (on the original drive) shows up and the BOOTCAMP partition shows up--with the proper size--but windows does NOT recognize the partition as being NTFS. It reports it as being RAW and 'urges' me to format it (yeah, right…).
So, I place the sector-by-sector duplicate back into the Mac, boot up (only the Mac OS is given as an option), and am ready to 'work on' recovering the Win7 BC partition (if possible).
I am avoiding trying to fix the booting problem, because recovery of the 1.2TB of a working system is much more critical for me.
The clone HDD reports the same in DU, except now the GPT partition shows up as greyed-out 'disk1s1', right above the "BOOTCAMP" partition in the sidebar. [I understand from researching this that disk1s1 is somehow related to the bootloader for BC?]
I used the demo version of Data Rescue 3 to scan for recoverable files from the drive, but it doesn't even report the .files. (I am running the deep scan now, but will take about another 9 hours to complete that).
Has anybody got any suggestions on how to reclaim this partition and its system?
Here are a couple of other details from diagnostic tools:
Model Name:    Mac Pro
Model Identifier:    MacPro2,1
Processor Name:    Quad-Core Intel Xeon
Processor Speed:    3 GHz
Number Of Processors:    2
Total Number Of Cores:    8
L2 Cache (per processor):    8 MB
Memory:    13 GB
Bus Speed:    1.33 GHz
Boot ROM Version:    MP21.007F.B06
newmac:~ gmmx2$ sudo gpt -r show disk1
       start        size index contents
           0           1         PMBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34      262144      1 GPT part - E3C9E316-0B5C-4DB8-817D-F92DF00215AE
      262178        2014
      264192      409600      2 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      673792 2929602560      3 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
2930276352         783
2930277135          32         Sec GPT table
2930277167           1         Sec GPT header
newmac:~ gmmx2$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            999.9 GB   disk0s2
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.5 TB     disk1
   1:         Microsoft Reserved                         134.2 MB   disk1s1
   2:                        EFI                         209.7 MB   disk1s2
   3:       Microsoft Basic Data BOOTCAMP               1.5 TB     disk1s3
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.5 TB     disk2
   1:                        EFI                         209.7 MB   disk2s1
   2:                  Apple_HFS D3                      750.0 GB   disk2s2
   3:       Microsoft Basic Data DATA3                  749.9 GB   disk2s3
/dev/disk3
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *1.5 TB     disk3
   1:               Windows_NTFS SSDSUB                 1.5 TB     disk3s1
[Disk 1 is obviously the BC one]
newmac:~ gmmx2$ sudo fdisk /dev/disk1
Password:
Disk: /dev/disk1    geometry: -5415437/4/63 [-1364690128 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE    0   0   2 - 1023 254 63 [         1 - -1364690129] <Unknown ID>
2: 00    0   0   0 -    0   0   0 [         0 -          0] unused
3: 00    0   0   0 -    0   0   0 [         0 -          0] unused
4: 00    0   0   0 -    0   0   0 [         0 -          0] unused
I cannot be the only one who has much such a catastrophic error, so I am hoping that there is something I have overlooked (being only a part-time Mac user) or there is some utility somewhere which can fix this--
Or if you need more data, let me know...
thank you for your time--gmm

Additional information: I found the DU Repair log for that session, in case it helps:
2013-01-28 04:31:00 -0700: Disk Utility started.
2013-01-28 04:31:30 -0700: Verify and Repair volume “BOOTCAMP2013-01-28 04:31:30 -0700: Starting repair tool:
2013-01-28 04:31:30 -0700: Verifying files...
2013-01-28 04:31:57 -0700: Adjusting instance tags to prevent rollover on file 0x606f0.
2013-01-28 04:31:57 -0700: Adjusting instance tags to prevent rollover on file 0x606f2.
2013-01-28 04:31:57 -0700: Adjusting instance tags to prevent rollover on file 0x606f4.
2013-01-28 04:32:01 -0700: Files verification completed.
2013-01-28 04:32:01 -0700: Verifying meta files...
2013-01-28 04:32:01 -0700: Meta files verification completed.
2013-01-28 04:32:01 -0700: Veryfing $AttrDef.
2013-01-28 04:32:01 -0700: Veryfing $Boot.
2013-01-28 04:32:01 -0700: Verifying $UpCase.
2013-01-28 04:32:01 -0700: Correcting $UpCase data.
2013-01-28 04:32:01 -0700: Verifying $LogFile.
2013-01-28 04:32:01 -0700: Verifying $Volume.
2013-01-28 04:32:02 -0700: Verifying files with EAs...
2013-01-28 04:32:02 -0700: EAs verification completed.
2013-01-28 04:32:02 -0700: Verifying folders...
2013-01-28 04:41:54 -0700: Folders verification completed.
2013-01-28 04:41:54 -0700: Minor inconsistencies are detected on the volume.
2013-01-28 04:41:54 -0700: Creating root directory
2013-01-28 04:41:54 -0700: Verifying security descriptors...
2013-01-28 04:41:54 -0700: Clearing invalid security descriptor 0x25e
2013-01-28 04:41:54 -0700: Clearing invalid security descriptor 0x260
2013-01-28 04:41:54 -0700: Clearing invalid security descriptor 0x797
2013-01-28 04:41:54 -0700: Clearing invalid security descriptor 0x1538
2013-01-28 04:41:54 -0700: Deleting orphan $Secure::$SII entry 0x25e
2013-01-28 04:41:54 -0700: Deleting orphan $Secure::$SII entry 0x260
2013-01-28 04:41:54 -0700: Deleting orphan $Secure::$SII entry 0x797
2013-01-28 04:41:54 -0700: Deleting orphan $Secure::$SII entry 0x1538
2013-01-28 04:41:54 -0700: Deleting orphan $Secure::$SDH entry Id=0x797
2013-01-28 04:41:54 -0700: Deleting orphan $Secure::$SDH entry Id=0x25e
2013-01-28 04:41:55 -0700: Deleting orphan $Secure::$SDH entry Id=0x260
2013-01-28 04:41:55 -0700: Deleting orphan $Secure::$SDH entry Id=0x1538
2013-01-28 04:41:55 -0700: Verifying files security...
2013-01-28 04:41:55 -0700: Record 0x97c contains invalid security Id (0x260)
2013-01-28 04:41:55 -0700: Record 0x99b contains invalid security Id (0x260)
2013-01-28 04:41:55 -0700: Record 0xb88 contains invalid security Id (0x260)
2013-01-28 04:41:55 -0700: Record 0xb91 contains invalid security Id (0x260)
2013-01-28 04:41:55 -0700: Record 0xb92 contains invalid security Id (0x260)
2013-01-28 04:41:55 -0700: Record 0x5633 contains invalid security Id (0x260)
2013-01-28 04:41:55 -0700: Record 0x5635 contains invalid security Id (0x260)
2013-01-28 04:41:55 -0700: Record 0x5637 contains invalid security Id (0x260)
2013-01-28 04:41:57 -0700: Record 0xe1d4 contains invalid security Id (0x25e)
2013-01-28 04:41:57 -0700: Record 0xe1d5 contains invalid security Id (0x25e)
2013-01-28 04:41:57 -0700: Record 0xe1d6 contains invalid security Id (0x260)
2013-01-28 04:41:58 -0700: Record 0x111c9 contains invalid security Id (0x260)
2013-01-28 04:41:58 -0700: Record 0x111ca contains invalid security Id (0x260)
2013-01-28 04:41:58 -0700: Record 0x111cb contains invalid security Id (0x260)
2013-01-28 04:41:58 -0700: Record 0x111dc contains invalid security Id (0x260)
2013-01-28 04:41:58 -0700: Record 0x11285 contains invalid security Id (0x260)
2013-01-28 04:41:58 -0700: Record 0x11297 contains invalid security Id (0x260)
2013-01-28 04:41:58 -0700: Record 0x113c4 contains invalid security Id (0x260)
2013-01-28 04:41:58 -0700: Record 0x113c5 contains invalid security Id (0x260)
2013-01-28 04:41:58 -0700: Record 0x12528 contains invalid security Id (0x260)
2013-01-28 04:42:00 -0700: Record 0x1cfe2 contains invalid security Id (0x260)
2013-01-28 04:42:00 -0700: Record 0x1dce1 contains invalid security Id (0x260)
2013-01-28 04:42:00 -0700: Record 0x1f6a8 contains invalid security Id (0x260)
2013-01-28 04:42:00 -0700: Record 0x1f6a9 contains invalid security Id (0x260)
2013-01-28 04:42:00 -0700: Record 0x1f6c4 contains invalid security Id (0x260)
2013-01-28 04:42:00 -0700: Record 0x21d57 contains invalid security Id (0x797)
2013-01-28 04:42:03 -0700: Record 0x3220d contains invalid security Id (0x260)
2013-01-28 04:42:06 -0700: Record 0x4bc2a contains invalid security Id (0x260)
2013-01-28 04:42:10 -0700: Record 0x64ff9 contains invalid security Id (0x1538)
2013-01-28 04:42:11 -0700: Can't read $SDS
2013-01-28 04:42:12 -0700: Security verification completed
2013-01-28 04:42:12 -0700: Verifying $MFT.
2013-01-28 04:42:12 -0700: Verifying $MFTMirr.
2013-01-28 04:42:12 -0700: Verifying $Bitmap.
2013-01-28 04:42:18 -0700: Volume repair complete.
2013-01-28 04:42:18 -0700: Updating boot support partitions for the volume as required.
2013-01-28 04:42:18 -0700: Repair tool completed: 2013-01-28 04:42:18 -0700:
2013-01-28 04:42:18 -0700:

I have a MacBook Pro. I was gone for 30 days and when I got back it tells me that my startup disk is full. I have a 500 GB drive and it shows that I have about 500 MB available. It constantly changes. How do I fix this?

I have a MacBook Pro that is telling me my startup disk is full. I left for 30 days and when I came back to use it, it tells me that the disk was full out of 500 GB. I don't have that much on it and it was perfectly fine when I left. I Verified the disk through disk utility and it told me it had issues so then I repaired it and it said everything is fine. It still says the hard drive is full. How do I fix this problem. Any help is greatly appreciated.

Have a read here Where did my Disk Space go?
Stefan

My disk drive will no longer read my disks being inserted how do i fix this?

my disk drive will no longer read disks that i insert in there how do i fix this?

Take it in for repair.

FCP X version 10.1.1. When Sharing to DVD I get the following alert " There was an error burning your discd. Not enough Disk Space in Target Folder" I have 700GB   free. Where is this target folder located? how can I fix this problem? not space prob

Sharing to DVD I get the following alert " There was an error burning your disc. Not enough Disk Space in Target Folder" I have 700GB   free. Where is this target folder located? How can I fix this problem? This is definitely not a space problem.
Since starting with FCP X, there has been tons of issues, now that the product actually works with the exception above, makes it impossible to share the production. Has Apple fixed this problem. is there a knowledge base article on this?
On another note, One reason I have not purchased support on FCP X is because you sold a product that never worked for almost an entire year or more.   Now I can finally finish my project, I cannot share it.....Really. This has to be fixed now, I am loosing money as I typed this.
Regards,
Rob Harris

Just curious, why would repairing permissions, rebooting ( rebooted 2 times already today) or creating a new user possibly fix this.
I cannot create a new user, that is way too much work. I will repair permissions again, I repaired permissions just a few days ago. Then I will reboot, login and turn off App Nap and rerun the Share DVD.
There must be something seriously wrong with the OS if your are suggesting creating another user.   WOW!
Rob H.

When I try to set up Time Machine, there are no back up disks displayed. Therefore, I cannot turn on Time Machine. How can I fix this?

When I try to set up Time Machine, there are no back up disks displayed. Therefore, I cannot turn on Time Machine. How can I fix this?

Thanks - let it finish, but zero out data is unnecessary. That option is intended to thoroughly erase previously recorded data so that it cannot be recovered without sophisticated data recovery techniques.
Case sensitive is OK but I suggest you simply select Mac OS X Extended since "case sensitive" may complicate things for you in the future, should it be necessary to restore files to a case-ignorant volume.
Once it finishes, make sure it appears as a selectable option in Time Machine. If it does your problems are solved, but consider using Disk Utility and reformatting it. This time don't worry about zeroing unused space, and select Mac OS X Extended (Journaled). It will only take a few seconds this time.
For a more thorough description read Apple Support Communites contributor Pondini's FAQ: http://pondini.org/TM/5.html Read the pink box regarding the subject of case sensitivity.
Also: Mac Basics: Time Machine

After updating my Time Capsule, I received this message on my Airport Express: This version of AirPort Utility doesn't support this base station." How can I fix this?

After updating my Time Capsule, I received this message on my Airport Express: This version of AirPort Utility doesn’t support this base station." How can I fix this?

Per chance is your AirPort Express an 802.11g model? If so, you will need to use AirPort Utility v5.6 to administer it. However, this version will not install under OS X Mountain Lion without a workaround.
The following is one of those workarounds:
Here are the basic steps to install version 5.6 under Mountain Lion using CharlesSoft's Pacifist:
If you haven't already download the AirPort Utility disk image file directly from Apple Support Download
Place the resultant AirPortUtility56.dmg file onto your Mac's Desktop.
Run Pacifist.
Click on the Open Package option. Find the disk image file that you just placed on your desktop, and then, click on Open.
The utility is located as follows: Contents of AirPortUtility56.dmg > Contents of AirPortUtility56.pkg > Contents of AirPortUtility56Lion.pkg > Applications > Utilities > AirPort Utility 5.6.app
Drag AirPort Utility 5.6.app to your Mac's /Applications/Utilities folder.
You can now run the AirPort Utility from the Utilities folder.

My Time Machine keeps repeating the error message "Time Machine could not complete the back- The back-up disk image "/Volumes/Data/User's iMac.sparsebundle" could not be accessed (error -1). How can I fix this?s/

My Time Machine could not complete the back-up. The error message says "The backup disk image "/Volumes/DataUser's iMac.sparsebundle" could not be accessed (error-1). How can I fix this problem?

Welcome to the Apple Support Communities
See > http://pondini.org/TM/C17.html

Have a mac book pro that crashed. ran disk utility to repair. comp booted and ran for short time. then crashed. ran repair again. disk utility said it could not repair files and i needed to format hard drive and start again. now nothing works

have a mac book pro that crashed. ran disk utility to repair. comp booted and ran for short time. then crashed. ran repair again. disk utility said it could not repair disk and needed to format and start again.
comp said it could not unmount disk and now when comp trys to boot all i get is a question mark on the screen. help

Erase and Install
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Quit DU after formatting completes and return to the installer. Install Snow Leopard.
5. After restart into Snow Leopard download and install Mac OS X 10.6.8 Update Combo v1.1.

Repairing premissions/ disk utility ????? how do I fix this...

Similar Messages

Maybe you are looking for