Repca fails to load schemas - doesn't find the db

RH 5.2
10205 database
OIM 10104
Running OracleAS RepCA - step 1 out 4- Specify the connection information for the database in which you want to load....
Error : Database Connection Error->>>>
Database is up and running, tnsping works.
Any ideas what to look for?
Thx,

make sure both short and long network aliases can be resolved, e.g. orcl, and orcl.your.company.com

Similar Messages

N82: Nokia Software Update doesn't find the phone

Hello, I am trying to update the firmware of my Nokia N82, but I get an error message from Nokia Software Updater saying that it doesn't find the phone. I find that strange as Nokia PC Suite indeed finds the phone. The icon on the taskbar says that "AndersMobil is connected".
I've noticed that if I let Nokia PC Suite run at the same time as Nokia Software Updater, this icon shows that the phone is being connected and disconnected several times while Nokia Software Updater tries to find the phone, something that might indicate that the two programs cannot be run at the same time? I tried to run Nokia Software Update alone, but still the program doesn't find the phone.
In Windows Hardware Manager (or Units manager, not sure of the english translation) of Windows XP, "Nokia GSM Phone USB Modem" gives the following error message: "The unit is not working as it should as Windows cannot load the necessary drivers for this unit (Code 31)." Under "Portable Devices" in Hardware Manager/(or Units manager?) the error message "This unit cannot start. (Code 10)" appears for the unit "AndersMobil".
I followed the guidelines on the internet reinstalling Nokia PC Suite and Nokia Software Updater, removing and reinstalling the drivers, but Nokia Software Update still doesn't find the phone, and the same error messages appears in Hardware/Units manager every time.
What do I do?
Regards,
Anders
By the way, I sent an e-mail to Nokia support about this but they still haven't answered although it's been a long time since.
Moderator note: translation removed.
Message Edited by sphere_s on 18-Feb-2008 06:53 AM

See also my post "N82: Remove memory card and click OK" at /discussions/board/message?board.id=smartphones&message.id=79797#M79797
I don't know if that problem might be interconnected with the other in some way or not.
Kind regards,
Anders

My old eMac doesn´t find the hardrive

After restart my eMac it appeared a folder with a question mark. I think my eMac doesn´t find the hardrive. I have tried to reinstall the system but of course it happens the same, it doesn´t find the disc where to install.
I restarted pressing ALT and then appears two arrows but nothing happens when I click on them.
Please, what can I do?
Regards.

It sounds to me like your hard drive has failed.
you'll need to get it repaired. They may or may not
be able to recover your data... I hope you have a
backup system.
Sorry mate.
Yes, fortunately I have a backup of everything and I have a iMac Intel Duo Core... what´s strange is that this has happen to me four times and the only way of recover the eMac was to format the hardrive. I think this time I going to change it for a new one.

I have an issue with time machine, it doesn't find the Lacie external driver it use to use. it is the same drive that I usaly use for time machine back ups. It is corectly plugged. What can I do ?

Hi,
I'm trying to back up my macbook with time machine on the Lacie external driver I usualy use for this, but today my computer doesn't find the driver. I haven't done back up in 6 month.
Today, the Lacie driver is pluged and running, but the computer just does'nt find it.
what shall I do ?

Some things to consider:
Is the drive mounted, i.e., visible via Finder and/or on the Desktop?
Is the drive still selected in System Preferences, Time Machine? If not, use the "Select Disk" button.
Is Time Machine still turned on (System Preferences, Time Machine)?
Can you see the drive (and mount it) using Disk Utility (in your Utilities folder)?
charlie

HT4889 Migration Assistant to update my new Mountain Lion iMac from an external USB hard disk drive, it is constantly saying that it is "looking for other computers". It doesn't find the external drive. Why is it looking for other computers?

I'm trying to use Migration Assistant to update my new Mountain Lion iMac from an external USB hard disk drive. I told it to look for a drive, yet it is constantly saying that it is "looking for other computers". It doesn't find the external drive ... it just endlessly looks for other computers. Why is it looking for other computers at all, when I told it not to?

Wow, the wording in Migration Assistant is misleading. I've never used it before, so I thought I would try to copy my files from the external drive ... my old iMac died, but I managed to get everything I need off it, using the 'cp' command in single-user mode. So I guess I'll just have to manually copy the files from the external drive to the new machine. I was hoping that Migration Assistant might help somehow, but obviously not.
Thanks for the quick reply!

My Itunes account tells me i need to update it to version 10.6.1, but when I click download and the computer (mac 2007) goes to the "checking for softwares" page it doesn't find the update?

my Itunes account tells me i need to update it to version 10.6.1, but when I click download and the computer (mac 2007) goes to the "checking for softwares" page it doesn't find the update? Help me please, what do I do?

Try updating to 10.6.3.25.
A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
iTunes 10.6.3

Failed to load database information. Details: The database DLL 'crdb_fielddef.dll' could not be loaded.

I recently recreated a report using our Crystal Reports XI for .NET upgrade. The report consists of 6 subreports, all based on dynamic datasets(field defs only) and loaded at runtime. Problem is that it's not working. I keep getting the following error when trying to run the asp.net ReportViewer page. Failed to load database information. Details: The database DLL 'crdb_fielddef.dll' could not be loaded. Error in File C:\DOCUME1\eseidel\LOCALS1\Temp\SupplierReport_Final {02CAA886-3D0C-43E9-8155-EA7E58FAB8C7}.rpt: Failed to load database information.
Any ideas? Thanks. I do have crdb_fielddef.dll in my c:/windows/system32 and I tried to include it in the project as well but with no luck. Please help. Thank you.
Eric

Looks like these report were created off of a ttx file. What Crystal Reports SDK are you using to develop the app? If you are using the RDC, this has not been tested in .NET and as such is not supported. If you are using teh CR assemblies for .NET, pass a dataset to the report. The dataset must match the structure as defined in the ttx. The report will then use the crdb_adoplus.dlll and you the fielddef dll will not come into play at all.

When i want to download the test version of CC, creative cloud doesn't find the file. Always search

When i want to download the test version of CC, creative cloud doesn't find the file. Always searching, what do i do?

Hi clemdef,
Change your browser and try again. Please refer the kb: http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html for download issues.
You may even try the direct download: http://prodesigntools.com/adobe-cc-direct-download-links.html .
Kindly follow the very important instructions before download.
Regards,
Romit Sinha

I can't pair my Bluetooth headphones, the iPhone 5 doesn't find the device. Can anyone help please?

I cant pair my Bluetooth headphones to my IPhone 5 the phone doesn't find thee vice. Can anyone help please?

Forget the pairing on iPhone and if possible the headphones ( see their user guide ) and start the pairing process again from "new"

Load error.Could not find the referenced object

Hi All,
When I open my created .jws file and complie the project, it gives the error
Load error.
Object:xxlc.oracle.apps.okc.articles.lists.server
Project:D:\JDevelop10g\jdevhome\jdev\myprojects\XXVariables.jpr
The following object(s) reffered to objects that could not be found:
xxlc.oracle.apps.okc.articles.lists.server.XXLCCreateListValueVO
Could not find the following referenced object(s):
xxlc.oracle.apps.okc.schema.articles.variables.server.XXLCVariableListValuesEO
All files are present in respective folders,then why this error is coming?
Please Help.
Thanks ,
SK

Click on XXVariables.jpr first, then File --> open locate the file and click OK.
Thanks
--Anil

Find palette doesn't find the IPCT category field

I have all my pictures by categories and suplemental categories. The "find" tool doesn't find anything if for example I type ARC (architecture), no matter if I select containing, containing all, starting or all metadata, all, etc... It seems that it doesn't search in some IPCT fields, at least in the category and suplemental category.

You are right. "find" will find IPTC entries in caption, say, but not in category. I guess it's like EXIF, where it's only make, model, serial number, artist, and software.
- Pierre

JCreator doesn't find the JAI packages

Hello Everyone!
I am new here and new to JAI. I read all posts i can find here and many another, too. I use JCreator and it doesn't "see" the javax.media.jai package. I installed the 1.3 version of JAI both jre and jdk, i set the environmental variables but it do't works. Originally i want to make TIF image from bufferedimage and the only solution that i find is JAI. If anyone knows any other solution to do this or to the package problem it will be welcome!
Regards,
Tamás Szabolics

You are right. "find" will find IPTC entries in caption, say, but not in category. I guess it's like EXIF, where it's only make, model, serial number, artist, and software.
- Pierre

Spotlight doesn't find the contents of at least one file

Goal - find a clever way to discover what Spotlight has (or hasn't indexed).
I have an xls spreadsheet that has the names and emails addresses of people who attended a recent course of mine. In the past few weeks I need to search precisely which course someone attended. The person had a unique last name and so I just put the name into
spotlight. Nothing found. A few minutes of digging manually confirmed the person had attended the course I expected.
Related discoveries
none of the contents of that file is indexed by Spotlight - tested by searching other names
older xls files in the same folder are correctly indexed
Searching on the filename finds the file so the file itself is found by spotlight
Copy the column of names to a temp spreadsheet, save them and search - file find
Rebuilding the index from scratch warmed my CPU but didn't change anything
I've checked the simple spotlight preferences - xls spreadsheets aren't ignored
Since I don't know why its getting missed I'm concerned that other files might not get indexed properly as well.

I would suspect a corrupt file. It may be just damaged enough to stop Spotlight reading it properly.
If you select the file in the Finder and hit the space bar does it open in Quick Look? If it doesn't then it is broken.
Try opening it in Excel and copying and pasting everything into a new file.

Failed to load components. Please reinstall the ap...

i have an n95.
windows xp sp 2.
my os is running in english.
the version for pc suite i downloaded was in english for the n95.
pc suite version 6.84.
all the applications work in pc suite EXCEPT for imagestore and applicationinstaller. anytime i try to load these applications it says "failed to load application components. please re-install the program." i HAVE uninstalled the program/drivers/ran pc suite cleaner. five times. i have tried installing an older version of pc suite (the one included in the n95 box). i've tried running that .bat file in pc connectivity solutions. i've tried re-installing through safe mode. this thing is driving me crazy! i just want to install apps on my n95
anybody know how to fix this problem? or does anybody have any suggestions? i tried talking to nokia support but they kept telling me to re-install the program. which i did... obviously it didn't work though. thanks.

Hi,
Maybe some of system dll file is missing from your PC. Can you take some logs from PC Suite's application installer?
If you can, do this:
1. Go to http://www.sysinternals.com/Utilities/Filemon.html and download Filemon (it is end of the page).
2. Start FileMon.exe and click 'Options', 'Filter/Highlight..' and set string: *Application* to 'Include' option.
3. Go to http://www.sysinternals.com/Utilities/Regmon.html and download Regmon (it is end of the page).
4. Start RegMon.exe and click 'Options', 'Filter/Highlight..' and set string: *Application* to 'Include' option.
6. Start Nokia Application installer
7. when you get the error message, save logs and attach those log files to your response message (or save to www.savefile.com and send link to me)

Repca fails to load schemas - doesn't find the db

Similar Messages

Maybe you are looking for