Repeat all the rows in a query?

Hi,
i have a query with 5 chars and one Key figure, i want to repeat all the values of my chars in the report, of this way i can represent all the values, in this moments when i execute, the report resume if the first char is going to be repeateda value, just appear one time until the value of this char change to another, i understand that the report do this to dont repeat a value when this is going to be the same, but in this problem i need it, how can i do it?, help

Hi,
Query properties -> Uncheck Hide repeated Key values...
i did it, but is the same, this hide the repeated values example,
apple   a
          b
          c
Pear   a
          b
          c
and i want
apple   a
apple   b
apple   c
Pear   a
Pear    b
Pear    c
help guys..

Similar Messages

Query from oracle to MySql using dblink fetch all the rows in MySql table

Hello,
I am using Heterogeneous connectivity between oracle 10204 to Mysql database.
I have a database link in the oracle side .
I am query a table in MySql that have 10 million rows.
Its doesnt matter if i am running :
select * from "CDR_Accounts"@mysql where "id"=7675405;
or
select * from "CDR_Accounts"@mysql ;
There is an index on the id column.
Yet, it seems that the Mysql is feteching all the rows from the table , all the data is transfering to oracle over the dblink , and only after that the requested rows are get back to the client.
The /etc/odbcinst.ini file is as follow:
[odbcprd:oracle@odbc /software/oracle]$ cat /etc/odbcinst.ini
[myodbc3]
Description             = Mysql connector to mysql version 3.5
Driver          = /software/oracle/MysqlOdbc/3.52/lib/libmyodbc3-3.51.25.so
Driver64                = /usr/lib
Setup           = /software/oracle/MysqlOdbc/3.52/lib/libmyodbc3S-3.51.25.so
Setup64         = /usr/lib
UsageCount              = 1
CPTimeout               = 3600
CPReuse         = Please advice
Thanks

When using a gateway it is always possible that a where clause is not sent to the remote database. This is called post processing and depends on several factors like the used ODBC driver, the columns and its data types but also if you specify certain functions in the where clause.
The fastest way to see if post processing happens is in Oracle 11g the explain plan for a query. In 10g the plan does not always match the statement sent to the foreign database. Here it would be better to enable gateway tracing and setting the trace level to ON. This will log the statements sent to the foreign database and you can compare what statement was sent with the statement you've tried to execute.

How to list all the rows from the table VBAK

Friends ,
How to list all the rows from the table VBAK.select query and the output list is appreciated.

Hi,
IF you want to select all the rows for VBAK-
Write-
Data:itab type table of VBAK,
wa like line of itab.
SELECT * FROM VBAK into table itab.
Itab is the internal table with type VBAK.
Loop at itab into wa.
Write: wa-field1,
endloop.

Get all the rows of the table

Hi,
     In my example I want to get all the rows of the table. The table has 20 rows. The visibleRowCount is set to 7 and firstVisibleRow is set to 3.
     I have created the table as
     var oTable = new sap.ui.table.Table({
           id: "oTable",
           title: "My Table",
           visibleRowCount: 7,
           firstVisibleRow: 3,
           selectionMode: sap.ui.table.SelectionMode.Single
     I tried to get the rows of the table using the below code
     var table = sap.ui.getCore().byId("oTable");
     var rows = table.getRows();     //     Returns only 7 rows
    How to get all the rows of the table when the table is populated with a odata service ?

Hi Vishal,
The table only put in the html file the rows that you define in visiblerowcount (rows control). The method getRows, get this controls, and you only have 7. The table control render automacatically the data in thats rows when you scroll on it.
If that you want is to retrieve the data of the rows, you need catch it from the model:
oTable.getModel().getData();
Regards,

How to show all the rows of a report in one page

My report has 30 rows, by default it just show 15 rows. I want to show all the rows just in one page, without cliking link or arrow to see the left.
In the Layout and Pagination:
Report Template: template: 15. Standard Report (PPR)
Pagination Scheme: Row Ranges X to Y (no pagination)
Display Position: Bottom - Right
Number of Rows: 1000
Number of Rows (item) 1000
Maximum Row Count: 1000
How to fix it?
Thanks.
Jen

Ok, I think I got it. I needed to blank out Number of Rows(item), Maximum row count and only populate Number of Rows. I was sure I did that before and it didnt work.
Do you think that the Sessions in Apex can cause unexpected results? I have found that when I make changes I have to log all the way out of Apex, close my browser and reopen everything to ensure that my change took. Does anyone else have this issue? I can move this into a different thread if need be.
Thx!

How to show all the rows in PRint html option in obiee 11g

Hi ,
I am facing a issue in obiee 11g(windows 2003 server). I have 2 environments (SIT & dev)
In dev I am not facing any issue but in SIT when i print the report in html only 1-25 rows are displayed.
What should i do to see all the rows
Thanks in advance
Abdul

Hi,
In your Dev Server its configured on instanceconfig.xml file that why are getting the all rows with setting pdf/print control properties.
1. Change instanceconfig.xml file in <biee11g_install>\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1 as following
<Views>
<Pivot>

<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>

<DefaultRowsDisplayedInDownload>2500</DefaultRowsDisplayedInDownload>

<DisableAutoPreview>false</DisableAutoPreview>
<MaxVisibleColumns>5000</MaxVisibleColumns>
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
</Pivot>
<Table>

<DefaultRowsDisplayedInDelivery>75</DefaultRowsDisplayedInDelivery>

<DefaultRowsDisplayedInDownload>2500</DefaultRowsDisplayedInDownload>
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
</Table>
</Table>
</Views>
3. Note the new elements added are the following to both <Pivot> and <Table>, the Pivot part controls Pivot view, and Table part controls Table View, my testing was done with Table View.
<MaxVisiblePages>2500</MaxVisiblePages>
<MaxVisibleRows>500000</MaxVisibleRows>
<MaxVisibleSections>5000</MaxVisibleSections>
4. Restart Presentation Server from EM, then run your request, do pdf export to verify.
Note:
When a table or pivot table includes a large number of rows, a set of buttons can be displayed under the view. You can use the following buttons to page through the rows in the view:
•First 25 Rows — Displays the first 25 rows of data for the view. The number that is used for the First, Previous, and Next buttons is specified by the Rows per Page field in the "Table Properties dialog: Style tab".
•Previous 25 Rows — Displays the previous 25 rows of data for the view.
•Next 25 Rows — Displays the next 25 rows of data for the view.
•Display maximum (500) rows per page — Allows you to display as many as the maximum number of rows per page at one time temporarily. The default is 500. The administrator can specify a different maximum value that is displayed on the tooltip for the button using the MaxVisibleRows element in the configuration file.
For more Refer my blog post
http://obieeelegant.blogspot.sg/2011/09/unable-to-export-all-rows-from-request.html
Note: this same thing you can also configure your UAT/Prod Server. then its will automated so you no need to configure each report.its will affect all the pivot/table view
also its noted as a bug in obiee11g(11.1.1.3/5) and its fixed in obiee11.1.1.6.0 and above version
FYI:
Thanks
Deva

How to show all the rows in a report

I have a report, and i want to show all the rows in a page, how to do it. Currently, i just show part of rows.
Thanks,
Jen

Jen,
I'm guessing you are using Application Express,...
Go to the region where the report is located, go to report attributes. In the "Layout and Pagination" section there is a setting called "Number of Rows". Change the setting, and that's it.

Is there a way to BULK COLLECT with FOR UPDATE and not lock ALL the rows?

Currently, we fetch a cursor on a few million rows using BULK COLLECT.
In a FORALL loop, we update the rows.
What is happening now, is that we run this procedure at the same time, and there is another session running a MERGE statement on the same table, and a DEADLOCK is created between them.
I'd like to add to the cursor the FOR UPDATE clause, but from what i've read,
it seems that this will cause ALL the rows in the cursor to become locked.
This is a problem, as the other session is running MERGE statements on the table every few seconds, and I don't want it to fail with ORA-0054 (resource busy).
What I would like to know is if there is a way, that only the rows in the
current bulk will be locked, and all the other rows will be free for updates.
To reproduce this problem:
1. Create test table:
create table TEST_TAB
ID1 VARCHAR2(20),
ID2 VARCHAR2(30),
LAST_MODIFIED DATE
2. Add rows to test table:
insert into TEST_TAB (ID1, ID2, LAST_MODIFIED)
values ('416208000770698', '336015000385349', to_date('15-11-2009 07:14:56', 'dd-mm-yyyy hh24:mi:ss'));
insert into TEST_TAB (ID1, ID2, LAST_MODIFIED)
values ('208104922058401', '336015000385349', to_date('15-11-2009 07:11:15', 'dd-mm-yyyy hh24:mi:ss'));
insert into TEST_TAB (ID1, ID2, LAST_MODIFIED)
values ('208104000385349', '336015000385349', to_date('15-11-2009 07:15:13', 'dd-mm-yyyy hh24:mi:ss'));
3. Create test procedure:
CREATE OR REPLACE PROCEDURE TEST_PROC IS
TYPE id1_typ is table of TEST_TAB.ID1%TYPE;
TYPE id2_typ is table of TEST_TAB.ID2%TYPE;
id1_arr id1_typ;
id2_arr id2_typ;
CURSOR My_Crs IS
SELECT ID1, ID2
FROM TEST_TAB
WHERE ID2 = '336015000385349'
FOR UPDATE;
BEGIN
OPEN My_Crs;
LOOP
FETCH My_Crs bulk collect
INTO id1_arr, id2_arr LIMIT 1;
Forall i in 1 .. id1_arr.COUNT
UPDATE TEST_TAB
SET LAST_MODIFIED = SYSDATE
where ID2 = id2_arr(i)
and ID1 = id1_arr(i);
dbms_lock.sleep(15);
EXIT WHEN My_Crs%NOTFOUND;
END LOOP;
CLOSE My_Crs;
COMMIT;
EXCEPTION
WHEN OTHERS THEN
RAISE_APPLICATION_ERROR(-20000,
'Test Update ' || SQLCODE || ' ' || SQLERRM);
END TEST_PROC;
4. Create another procedure to check if table rows are locked:
create or replace procedure check_record_locked(p_id in TEST_TAB.ID1%type) is
cursor c is
select 'dummy'
from TEST_TAB
WHERE ID2 = '336015000385349'
and ID1 = p_id
for update nowait;
e_resource_busy exception;
pragma exception_init(e_resource_busy, -54);
begin
open c;
close c;
dbms_output.put_line('Record ' || to_char(p_id) || ' is not locked.');
rollback;
exception
when e_resource_busy then
dbms_output.put_line('Record ' || to_char(p_id) || ' is locked.');
end check_record_locked;
5. in one session, run the procedure TEST_PROC.
6. While it's running, in another session, run this block:
begin
check_record_locked('208104922058401');
check_record_locked('416208000770698');
check_record_locked('208104000385349');
end;
7. you will see that all records are identified as locked.
Is there a way that only 1 row will be locked, and the other 2 will be unlocked?
Thanks,
Yoni.

I don't have database access on weekends (look at it as a template)
suppose you
create table help_iot
(bucket number,
id1    varchar2(20),
constraint help_iot_pk primary key (bucket,id1)
organization index;not very sure about the create table syntax above.
declare
maximal_bucket number := 10000; -- will update few hundred rows at a time if you must update few million rows
the_sysdate date := sysdate;
begin
truncate table help_iot;
insert into help_iot
select ntile(maximal_bucket) over (order by id1) bucket,id1
    from test_tab
   where id2 = '336015000385349';
for i in 1 .. maximal_bucket
loop
    select id1,id2,last_modified
      from test_tab
     where id2 = '336015000385349'
       and id1 in (select id1
                     from help_iot
                    where bucket = i
       for update of last_modified;
    update test_tab
       set last_modified = the_sysdate
     where id2 = '336015000385349'
       and id1 in (select id1
                     from help_iot
                    where bucket = i
    commit;
    dbms_lock.sleep(15);
end loop;
end;Regards
Etbin
introduced the_sysdate if last_modified must be the same for all updated rows
Edited by: Etbin on 29.11.2009 16:48

ALV not showing all the rows! Please help!

Hi Experts,
     I have webdynpro ALV report and I am using SALV_WD_TABLE as the reusable component. In component controller's WDDOINIT I have written the code for pulling teh data from R/3 table and binding it to ALV table.
In the view's WDDOMODIFYVIEW event I have written the following code to get subtotal and grand total of Qty column based on product column.
      I have coded like this:
      lr_field_settings ?= l_value.
lr_field = lr_field_settings->get_field( 'PRODUCT' ).
lr_field->if_salv_wd_sort~set_group_aggregation_allowed( ABAP_TRUE ).
lr_field->if_salv_wd_sort~create_sort_rule( ).
l_sortrule = lr_field->if_salv_wd_sort~GET_SORT_RULE( ).
l_sortrule->set_sort_order( if_salv_wd_c_sort=>sort_order_ascending ).
l_sortrule->set_group_aggregation( ABAP_TRUE ).
*...Aggregate Field PRODUCT
lr_field = lr_field_settings->get_field( 'QTY' ).
lr_field->if_salv_wd_aggr~create_aggr_rule( ).
lr_aggr_rule = lr_field->if_salv_wd_aggr~get_aggr_rule( ).
lr_aggr_rule->set_aggregation_type( if_salv_wd_c_aggregation=>aggrtype_total ).
It is working now but my ALV table is not showing all the rows. I have 6 products and it is showing from product 2. But it is calculating grand total and subtotal correctly. I am not able to see the first product row and subtotal for that. Even if I click on the ^ icon in the ALV table below it is not showing all the rows.
What could be the problem?
Please help
Thanks
Gopal

did you somehow manage to set the "first visible row" property on table object
to 2.   Only thing I can think of that could cause this effect.
Cheers
Phil

InfoPath form load rule is not checking all the rows in form library

Hi,
Requirement:
We have a form library named "HR Annual Review". In the InfoPath form we have two buttons "Save" and "Submit". User is allowed to Save multiple times and only once using Submit button. The file name of form library "HR
Annual Review" will be stored in the format “<username>+<mm>+<dd>+<yy>.xml”. Say for example, an user named Mike Walt submitted a form then the file name will be as “MikeWalt012314.xml”. If the same user (Mike Walt)
submits the form and tries to open the form for subsequent edit, then we need to show a view which has an error info saying “The Appraisal is already submitted for the current appraisal cycle”.
Solution we tried:
To achieve the above requirement, we tried using InfoPath Form Load and add a rule to check whether the combination of current user name and the year already exists in the filename column of the form library. But the rule we applied is not checking all the
rows in the form library. The rule is always checking the first row of the form library.
What we need:
We need the validation using InfoPath rule or some other way/solution to check whether the combination of current login username and current year file already exists in the form library.
Thanks in advance.
Srivignesh J

Hi Srivignesh,
Submit button Uses the Main Data connection to submit the data to the list. This is what you are using and naming the file in the format. You can create secondary data submit that will update the exiting item in the list. With this, you don't have to create
any rules to check all the rows which is also not possible in OOB InfoPath.
Once you have the two data connection, hide the toolbar from the form and display these two on the button. For The Submit button, apply the rule to hide the button if created by is not empty. For Save button, apply the rule to hide the button if Created
By is empty. This way, when a new form is created, you will see the Submit button, and when the user have to update the form, they will see Save button. Hope it help.s
Regards, Kapil ***Please mark answer as Helpful or Answered after consideration***

Not able to download all the rows to excel sheet from alv grid display

Hi experts,
I am not able to download all the rows which are displayed in alv grid display for some material numbers.
for some materials i am able to download, i used two ways to download 1) from icon(local file) on grid 2) menu list->export.
i checked in debugging till selecting the spread sheet pop up window, i am able to see all the data in internal table.
Can you suggest me what will be the problem....
thanks in advance,

hi sandeep,
sorry for didnt specify clearly.
note: EX: "asaasdada in this sentence i said " this symbol is special character not the text.
building final internal table code
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
    EXPORTING
      capid                 = p_capid
      datuv                 = sy-datum
      ehndl                 = '1'
      mktls                 = 'X'
      mehrs                 = 'X'
      mmory                 = '1'
      mtnrv                 = p_matnr
      stlal                 = '1'
      stpst                 = 0
      svwvo                 = 'X'
      werks                 = p_werks
      vrsvo                 = 'X'
    TABLES
      stb                   = i_stb
    EXCEPTIONS
      alt_not_found         = 1
      call_invalid          = 2
      material_not_found    = 3
      missing_authorization = 4
      no_bom_found          = 5
      no_plant_data         = 6
      no_suitable_bom_found = 7
      conversion_error      = 8
      OTHERS                = 9.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_stb1[] = i_stb[].
IF NOT i_stb1[] IS INITIAL.
    SORT i_stb1 BY idnrk.
    DELETE ADJACENT DUPLICATES FROM i_stb1 COMPARING idnrk.
    SELECT bmatn ematn FROM ampl INTO TABLE i_ampl
      FOR ALL ENTRIES IN i_stb1
      WHERE bmatn = i_stb1-idnrk AND
            datuv LE sy-datum AND
            datub GE sy-datum.
    SELECT
    matnr
    bwkey
    verpr
    stprs
    bwprh
    FROM mbew
    INTO TABLE i_mbew
    FOR ALL ENTRIES IN i_stb1
    WHERE
        matnr EQ i_stb1-idnrk AND
        bwkey EQ i_stb1-werks.
    IF NOT i_stb1[] IS INITIAL.
      SELECT matnr werks beskz
             dzeit webaz plifz
             ekgrp
      INTO TABLE i_marc
      FROM marc
      FOR ALL ENTRIES IN i_stb1
      WHERE matnr = i_stb1-idnrk
      AND werks = i_stb1-werks.
      SORT i_marc BY matnr werks.
    ENDIF.
    CLEAR i_ekpo.
    CLEAR i_vend.
    IF NOT i_stb1[] IS INITIAL.
      SELECT ebeln ebelp matnr werks loekz aedat
             netpr peinh
      INTO TABLE i_ekpo
      FROM ekpo
            FOR ALL ENTRIES IN i_stb1
            WHERE matnr = i_stb1-idnrk
            AND werks = i_stb1-werks.
      SORT i_ekpo BY matnr ASCENDING
                     aedat DESCENDING
                     ebeln DESCENDING
                     ebelp DESCENDING.
      IF NOT i_ekpo IS INITIAL.
        SELECT k~ebeln k~lifnr l~name1
        INTO TABLE i_vend
        FROM ekko AS k INNER JOIN lfa1 AS l
        ON k~lifnr EQ l~lifnr
        FOR ALL ENTRIES IN i_ekpo
        WHERE ebeln = i_ekpo-ebeln.
        SORT i_vend BY ebeln.
      ENDIF.
    ENDIF.
ENDIF.
i_ampl1[] = i_ampl[].
IF NOT i_ampl1[] IS INITIAL.
    SORT i_ampl1 BY ematn.
    DELETE ADJACENT DUPLICATES FROM i_ampl1 COMPARING ematn.
    SELECT matnr mfrpn mfrnr FROM mara INTO TABLE i_mara
      FOR ALL ENTRIES IN i_ampl1
       WHERE matnr = i_ampl1-ematn.
ENDIF.
SORT i_ampl BY bmatn.
IF NOT i_stb[] IS INITIAL.
    SELECT stlty stlnr stlkn stpoz idnrk potx1 potx2
    INTO TABLE i_stpo
    FROM stpo
    FOR ALL ENTRIES IN i_stb
    WHERE stlty = i_stb-stlty
      AND stlnr = i_stb-stlnr
      AND stlkn = i_stb-stlkn
      AND stpoz = i_stb-stpoz
      AND idnrk = i_stb-idnrk.
    SORT i_stpo BY stlty stlnr stlkn stpoz idnrk.
ENDIF.
LOOP AT i_stb INTO wa_stb.
    READ TABLE i_marc INTO wa_marc
    WITH KEY     matnr = wa_stb-idnrk
                 werks = wa_stb-werks
                 BINARY SEARCH.
    IF sy-subrc = 0.
      wa_outtab-beskz = wa_marc-beskz.
      wa_outtab-dzeit = wa_marc-dzeit.
      wa_outtab-webaz = wa_marc-webaz.
      wa_outtab-plifz = wa_marc-plifz.
      wa_outtab-ekgrp = wa_marc-ekgrp.
    ENDIF.
    READ TABLE i_ekpo INTO wa_ekpo
        WITH KEY matnr = wa_stb-idnrk.
    IF sy-subrc = 0.
      wa_outtab-netpr = wa_ekpo-netpr.
      wa_outtab-peinh = wa_ekpo-peinh.
      READ TABLE i_vend INTO wa_vend
      WITH KEY ebeln = wa_ekpo-ebeln
               BINARY SEARCH.
      IF sy-subrc = 0.
        wa_outtab-lifnr = wa_vend-lifnr.
        wa_outtab-name_sup = wa_vend-name1.
      ENDIF.
    ENDIF.
    READ TABLE i_stpo INTO wa_stpo
    WITH KEY stlty = wa_stb-stlty
             stlnr = wa_stb-stlnr
             stlkn = wa_stb-stlkn
             stpoz = wa_stb-stpoz
             idnrk = wa_stb-idnrk
             BINARY SEARCH.
    IF sy-subrc = 0.
      wa_outtab-potx1 = wa_stpo-potx1.
      wa_outtab-potx2 = wa_stpo-potx2.
    ENDIF.
    READ TABLE i_mbew INTO wa_mbew
    WITH KEY
    matnr = wa_stb-idnrk
    bwkey = wa_stb-werks.
    IF sy-subrc IS INITIAL.
      MOVE:
      wa_mbew-verpr TO wa_outtab-verpr,
      wa_mbew-stprs TO wa_outtab-stprs,
      wa_mbew-bwprh TO wa_outtab-bwprh.
    ENDIF.
    wa_outtab-matnr = p_matnr.
    wa_outtab-posnr = wa_stb-posnr.
    wa_outtab-stufe = wa_stb-stufe.
    wa_outtab-idnrk = wa_stb-idnrk.
    wa_outtab-ojtxb = wa_stb-ojtxp.
    wa_outtab-menge = wa_stb-menge.
    wa_outtab-meins = wa_stb-meins.
    MOVE: wa_stb-zzitem_draw_no TO wa_outtab-zzitem_draw_no.
    IF wa_stb-upskz = 'X'.
      SELECT * FROM stpu INTO TABLE i_stpu
               WHERE stlty = wa_stb-stlty AND
                      stlnr = wa_stb-stlnr AND
                      stlkn = wa_stb-stlkn AND
                      stpoz = wa_stb-stpoz.
    ENDIF.
    LOOP AT i_stpu INTO wa_stpu.
      wa_outtab-upmng = wa_stpu-upmng.
      wa_outtab-ebort = wa_stpu-ebort.
      wa_outtab-uposz = wa_stpu-uposz.
      CONCATENATE v_ebort wa_stpu-ebort      INTO v_ebort
      SEPARATED BY space.
    ENDLOOP.
    MOVE strlen( v_ebort ) TO v_len.
    MOVE: 0 TO x,
      128 TO y.
    DATA : lt_tab TYPE TABLE OF swastrtab.
    DATA : ls_tab LIKE LINE OF lt_tab.
    DATA : lv_ebort TYPE string.
    CLEAR lv_ebort. CLEAR lt_tab.
    MOVE v_ebort TO lv_ebort.
    CALL FUNCTION 'SWA_STRING_SPLIT'
      EXPORTING
        input_string                 = lv_ebort
        max_component_length         = 128
      TABLES
        string_components            = lt_tab
      EXCEPTIONS
        max_component_length_invalid = 1
        OTHERS                       = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    IF lt_tab[] IS NOT INITIAL.
      LOOP AT lt_tab INTO ls_tab.
        CLEAR lv_ebort.
        MOVE: ls_tab-str TO lv_ebort.
        CONDENSE lv_ebort.
        MOVE lv_ebort TO wa_outtab-ebort.
        APPEND wa_outtab TO i_outtab.
        CLEAR:
        wa_outtab-matnr,
        wa_outtab-posnr,
        wa_outtab-zzitem_draw_no,
        wa_outtab-ojtxb,
        wa_outtab-menge,
        wa_outtab-meins,
        wa_outtab-uposz,
        wa_outtab-upmng,
        wa_outtab-verpr,
        wa_outtab-stprs,
        wa_outtab-bwprh,
        wa_outtab-lifnr,
        wa_outtab-name_sup,
        wa_outtab-potx1,
        wa_outtab-potx2,
        wa_outtab-netpr,
        wa_outtab-peinh.
*        wa_outtab-idnrk.
      ENDLOOP.
    ELSE.
      APPEND wa_outtab TO i_outtab.
    ENDIF.
    CLEAR v_ebort.
    CLEAR: wa_stpu.
    REFRESH: i_stpu.
    LOOP AT i_ampl INTO wa_ampl WHERE bmatn = wa_stb-idnrk.
    READ TABLE i_mara INTO wa_mara WITH TABLE KEY matnr = wa_ampl-ematn.
      IF sy-subrc = 0.
        LOOP AT i_outtab INTO wa_outtab
        WHERE
        idnrk = wa_stb-idnrk AND
        flag NE 'X'.
          wa_outtab-mfrpn = wa_mara-mfrpn.
          wa_outtab-mfrnr = wa_mara-mfrnr.
          SELECT SINGLE name1 FROM lfa1 INTO wa_outtab-name1 WHERE lifnr = wa_mara-mfrnr.
          MOVE 'X' TO wa_outtab-flag.
          MODIFY i_outtab FROM wa_outtab
          TRANSPORTING mfrpn mfrnr name1 flag.
          EXIT.
        ENDLOOP.
        IF sy-subrc <> 0.
          CLEAR:
          wa_outtab-matnr,
          wa_outtab-posnr,
          wa_outtab-zzitem_draw_no,
          wa_outtab-ojtxb,
          wa_outtab-ebort,
*          wa_outtab-idnrk,
          wa_outtab-menge,
          wa_outtab-meins,
          wa_outtab-uposz,
          wa_outtab-upmng,
          wa_outtab-verpr,
          wa_outtab-stprs,
          wa_outtab-bwprh,
          wa_outtab-lifnr,
          wa_outtab-name_sup,
          wa_outtab-potx1,
          wa_outtab-potx2,
          wa_outtab-netpr,
          wa_outtab-peinh.
          wa_outtab-mfrpn = wa_mara-mfrpn.
          wa_outtab-mfrnr = wa_mara-mfrnr.
          SELECT SINGLE name1 FROM lfa1 INTO wa_outtab-name1 WHERE lifnr = wa_mara-mfrnr.
          APPEND wa_outtab TO i_outtab.
        ENDIF.
      ENDIF.
      REFRESH i_stpu.
      CLEAR i_stpu.
    ENDLOOP.    CLEAR: wa_matnr1, wa_mfrnr, wa_outtab.
ENDLOOP.
Edited by: srinivasareddy j on Mar 9, 2011 7:16 AM
Edited by: srinivasareddy j on Mar 9, 2011 7:20 AM

How can I search a word in a column and erase all the rows containing that word?

How can I erase all the rows containing a certain word at once?
Right now I do it manually : I search the word in a certain column with cmd+f, after that it points out where the word is in different rows. And then I manually erase every row but this takes a lot of time when you have 500 row! There must be a way to select all the rows concerned at once and erase them? Thks!

assuming this is something you don't do very often you can simply use the search feature to identify instances of the search term, and select the row, delete the row then search again.
The next level would be to add a new column where you identify that the search term exists in a cell of the row, then you sort by the new column:
B1=IF(IFERROR(FIND("team", A1,1), 0)>0, "FOUND", "")
my search term is "team" change yours as needed.
select B1, copy,
select Column B, paste
Now sort:
Inspect the rows to make sure the rows found are REALLY ones you want to remove. select the ones you want to remove and delete those rows.

Procudure to count all the rows in a all tables in the schema

When I run the following store procedure to count all the rows in all the tables I crash my sql Plus editor:
CREATE OR REPLACE PROCEDURE TC_TABLEROWCOUNT(OWNER IN varchar2)
IS
row_count number;
cursor get_tab is
select table_name, num_rows
from all_tables
where owner='MAXDEV';
begin
dbms_output.put_line('Checking Record Counts for schema maxdev ');
FOR get_tab_rec IN get_tab LOOP
     BEGIN
          EXECUTE IMMEDIATE 'select count(*) from '||get_tab_rec.table_name
          INTO row_count;
          EXCEPTION WHEN OTHERS THEN
                    dbms_output.put_line('Error counting rows for table '
                                             ||get_tab_rec.table_name);
     END;
END LOOP;
END;
What am I doing wrong.
Thanks for any help Tony

The boss gave me 5 pages of tables and wants to know how many row there are in each table. There is a problem of one DB being out of sync with another.
But I have managed to work the problem though.
here is the working code:
CREATE OR REPLACE PROCEDURE TC_TABLEROWCOUNT (
TableOwner IN varchar2)
IS
row_count number;
vTable varchar2(30);
v_sqlstmt varchar2(100);
cursor get_tab is
select table_name, num_rows
from all_tables
where owner = TableOwner;
begin
dbms_output.put_line('Checking Record Counts for schema maxdev ');
FOR get_tab_rec IN get_tab LOOP
vTable := get_tab_rec.table_name;
v_sqlstmt := 'SELECT count(*) from '||vTable;
EXECUTE IMMEDIATE v_sqlstmt into row_count;
dbms_output.put_line('Table '|| get_tab_rec.table_name || ' Row ' || row_count);
END LOOP;
END;

How to display all the rows in a report

How will it be possible to show all the rows in a report, in a table view , other than modifying the table properties for each report individually ?
Is there some setting, so that for all tabular reports, all the rows will be displayed in one page?
I have added the following to the instanceconfig.
<Table>
<ResultRowLimit>1000000</ResultRowLimit>
<MaxCells>1920000</MaxCells>
<MaxVisiblePages>1000</MaxVisiblePages>
<MaxVisibleRows>64000</MaxVisibleRows>
<MaxVisibleSections>25</MaxVisibleSections>
<DefaultRowsDisplayed>64000</DefaultRowsDisplayed>
<DefaultRowsDisplayedInDelivery>2000</DefaultRowsDisplayedInDelivery>
<DefaultRowsDisplayedInDownload>64000</DefaultRowsDisplayedInDownload>
</Table>
Still I can view only 25 rows for the report.
Thank you.

Hi,
Open your report--> Select Table view--> Edit view properties-->Row per page --> Give here 9999999.
It will show all the rows in the report.
Hope this help's
Thanks,
Satya

Writing all the rows in one line but cannot write more than 32767 character

Dear All,
i am trying to write the column of a table to a file with the '||' seperators. i want to write all the rows in one line of the file.
for E.g
Column1 Column2
A B
C D
in the file the output needs to be gone like
A||B||C||D
but after 32767 character it gives a write error. could please someone let me know what is wrong with my function below or how can i write more than 32767 character in one one.
CREATE OR REPLACE FUNCTION CORP_IB_DUMP_FILE (
P_QUERY IN VARCHAR2,
P_SEPARATOR IN VARCHAR2 DEFAULT '',
P_DIR IN VARCHAR2,
P_FILENAME IN VARCHAR2
RETURN NUMBER AUTHID CURRENT_USER
IS
L_OUTPUT UTL_FILE.FILE_TYPE;
L_THECURSOR INTEGER DEFAULT DBMS_SQL.OPEN_CURSOR;
L_THECURSOR2 INTEGER DEFAULT DBMS_SQL.OPEN_CURSOR;
L_COLUMNVALUE VARCHAR2 (4000);
L_STATUS INTEGER;
L_COLCNT NUMBER DEFAULT 0;
L_SEPARATOR VARCHAR2 (10) DEFAULT '';
L_CNT NUMBER DEFAULT 0;
BEGIN
L_OUTPUT := UTL_FILE.FOPEN (P_DIR, P_FILENAME, 'w', 32767);
DBMS_SQL.PARSE (L_THECURSOR, P_QUERY, DBMS_SQL.NATIVE);
FOR I IN 1 .. 255
LOOP
BEGIN
DBMS_SQL.DEFINE_COLUMN (L_THECURSOR, I, L_COLUMNVALUE, 4000);
L_COLCNT := I;
EXCEPTION
WHEN OTHERS
THEN
IF (SQLCODE = -1007)
THEN
EXIT;
ELSE
RAISE;
END IF;
END;
END LOOP;
DBMS_SQL.DEFINE_COLUMN (L_THECURSOR, 1, L_COLUMNVALUE, 4000);
L_STATUS := DBMS_SQL.EXECUTE (L_THECURSOR);
LOOP
EXIT WHEN (DBMS_SQL.FETCH_ROWS (L_THECURSOR) <= 0);
L_SEPARATOR := '';
FOR I IN 1 .. L_COLCNT
LOOP
DBMS_SQL.COLUMN_VALUE (L_THECURSOR, I, L_COLUMNVALUE);
UTL_FILE.PUT (L_OUTPUT, L_SEPARATOR || L_COLUMNVALUE);
L_SEPARATOR := P_SEPARATOR;
UTL_FILE.FFLUSH (L_OUTPUT);
END LOOP;
UTL_FILE.FFLUSH (L_OUTPUT);
L_CNT := L_CNT + 1;
END LOOP;
DBMS_SQL.CLOSE_CURSOR (L_THECURSOR);
UTL_FILE.FCLOSE (L_OUTPUT);
RETURN L_CNT;
END CORP_IB_DUMP_FILE;
/

user577300 wrote:
Dear All,
i am trying to write the column of a table to a file with the '||' seperators. i want to write all the rows in one line of the file.
for E.g
Column1 Column2
A B
C D
in the file the output needs to be gone like
A||B||C||D
but after 32767 character it gives a write error. could please someone let me know what is wrong with my function below or how can i write more than 32767 character in one one.
CREATE OR REPLACE FUNCTION CORP_IB_DUMP_FILE (
P_QUERY IN VARCHAR2,
P_SEPARATOR IN VARCHAR2 DEFAULT '',
P_DIR IN VARCHAR2,
P_FILENAME IN VARCHAR2
RETURN NUMBER AUTHID CURRENT_USER
IS
L_OUTPUT UTL_FILE.FILE_TYPE;
L_THECURSOR INTEGER DEFAULT DBMS_SQL.OPEN_CURSOR;
L_THECURSOR2 INTEGER DEFAULT DBMS_SQL.OPEN_CURSOR;
L_COLUMNVALUE VARCHAR2 (4000);
L_STATUS INTEGER;
L_COLCNT NUMBER DEFAULT 0;
L_SEPARATOR VARCHAR2 (10) DEFAULT '';
L_CNT NUMBER DEFAULT 0;
BEGIN
L_OUTPUT := UTL_FILE.FOPEN (P_DIR, P_FILENAME, 'w', 32767);
DBMS_SQL.PARSE (L_THECURSOR, P_QUERY, DBMS_SQL.NATIVE);
FOR I IN 1 .. 255
LOOP
BEGIN
DBMS_SQL.DEFINE_COLUMN (L_THECURSOR, I, L_COLUMNVALUE, 4000);
L_COLCNT := I;
EXCEPTION
WHEN OTHERS
THEN
IF (SQLCODE = -1007)
THEN
EXIT;
ELSE
RAISE;
END IF;
END;
END LOOP;
DBMS_SQL.DEFINE_COLUMN (L_THECURSOR, 1, L_COLUMNVALUE, 4000);
L_STATUS := DBMS_SQL.EXECUTE (L_THECURSOR);
LOOP
EXIT WHEN (DBMS_SQL.FETCH_ROWS (L_THECURSOR) <= 0);
L_SEPARATOR := '';
FOR I IN 1 .. L_COLCNT
LOOP
DBMS_SQL.COLUMN_VALUE (L_THECURSOR, I, L_COLUMNVALUE);
UTL_FILE.PUT (L_OUTPUT, L_SEPARATOR || L_COLUMNVALUE);
L_SEPARATOR := P_SEPARATOR;
UTL_FILE.FFLUSH (L_OUTPUT);
END LOOP;
UTL_FILE.FFLUSH (L_OUTPUT);
L_CNT := L_CNT + 1;
END LOOP;
DBMS_SQL.CLOSE_CURSOR (L_THECURSOR);
UTL_FILE.FCLOSE (L_OUTPUT);
RETURN L_CNT;
END CORP_IB_DUMP_FILE;
/Check your logic very carefully. You are using UTL_FILE.PUT() which should not automatically put end-of-line characters i n your file but you are reassigning l_seperator with p_seprator after the first time.
What value are you pasising in as p_seperator?
UTL_FILE.PUT() should allow you to write a string of bytes without newlines as long as its arguments are less than 32K, and you can control when the newlines get written. If your arguments are > 32K can you split them up without writing the newlines until you need to do so? Try something like (untested)
--         UTL_FILE.PUT (L_OUTPUT, L_SEPARATOR || L_COLUMNVALUE);
           UTL_FILE.PUT (L_OUTPUT, substr(L_SEPARATOR || L_COLUMNVALUE,1,32767));
           UTL_FILE.PUT (L_OUTPUT, substr(L_SEPARATOR || L_COLUMNVALUE),32767*2-1,32767));Edited by: riedelme on Sep 10, 2012 6:11 AM

Repeat all the rows in a query?

Similar Messages

Maybe you are looking for