Repeat Delta is bringing the invalid character back to BI

Hello Gurus
We extract data from CRM using datasource 0CRM_SALES_ACT_I to BI .
Often we are getting invalid character from source system.
When we get the issue rectified in source system (CRM) and re-extract
(repeat delta) we are getting the same invalid character instead of the corrected record.
Our process forbids us to edit the PSA. Request you to please advise.

hi,
in that scenario you can also have a look at the following tables:
RSALLOWEDCHAR in SE16 and also check out program in RSKC_ALLOWED_CHAR_MAINTAIN in SE38
also please have a look on:
173241 : Allowed characters in the BW System
1075403 : Unallowed characters and ALL_CAPITAL
i am not sure if it will help you but what i will recoomend is kindly raise your own OSS note with SAP by System -> Services -> SAP Service and provide your credentials
they will be happy to help you
regards
laksh

Similar Messages

How do I bring the Source List back in sight?

I opened iPhoto this morning to look for a specific photo, but the Source List does not show on the screen. So I cannot highlight the category of Photos in the Source List. How do I get the Source List back? It has never disappeared before. I checked iPhoto Preferences and could find nothing there to help me, either. The iPhoto Help in the menu bar doesn't tell how to retrieve the Source List - it just tells how to use it once you have it there.
Hilma Jenus

Oops! After writing the question above, I started exploring this website (I've never used it before), and I found the answer to the question - just click on the Escape key and the full screen of photos pulls in smaller and displays the Source List on the left right where it has "always" been! Thanks for providing the answer that I couldn't find in iPhoto Help or iPhoto Preferences!
Hilma Jenus

Bring the movies name back to the movies app

Since last update for the movie app it's changed to video, it's not so good I'll like to have the movies titles back to the movie app please sony make it, movies back

Contact Sony and let them know what you think.
http://support.sonymobile.com/global-en/contactUs/

Thank you for bringing the unread Feature back

Thank you, Adobe, for bringing back the bold text for unread posts!
Beat

Oh, that's so much better! I've been losing track way too easily.

After editing in photoshop how do I bring the edited photo back into lightroom next to the original photo instead of at the end of all the pictures?

After downloading Lightroom 5.5 my photos come back from Photoshop as the last picture instead of being next to the original. How do I correct this?

Most likely you need to change the Sort order of your images. In Library - Grid view there is a tool bar at the bottom of the grid window. If the tool bar isn't visible, hit [ T ] to activate it. Change the sort order to Filename or Capture Time. It is probably set to Added Order.

How do you bring the Aqua UI back into iTunes?

I have tried multiple things for to bring Aqua into iTunes 7.0.1 and i got nothing. If you have a suggestion, please let me know and insert a link please; and don't tell me "Multi-Plugin". That is the most stupid download because there is aqua in it but the only thing missing is the aqua scroll bars and that the format of the whole thing is weird. Please let me know.

Hi,
I also sought a solution to revert the look of iTunes 7 to it's former aqua look. The app that I finally settled on is called Aqua4iTunes.
You can find it at MacUpdate, here: http://www.macupdate.com/info.php/id/22881
Or at Version Tracker, here: http://www.versiontracker.com/dyn/moreinfo/macosx/30878
The home page for the app, is here: http://www.paul.barlow.ukonline.co.uk/
I hope that this helps you.
Brian

IOS 5 bring the iPod app back

I installed iOS 5 beta on my iPhone and I recognized that the great iPod app was replaced through Music and Video like on the iPad touch/iPad.
Is there a way to get back to the iPod app? That would be awesome!
Marc

iOS 5 beta is only available to developers who are under a non-disclosure agreement (unless you are stupidly admitting to being a software pirate on Apple's own public forums). You should only be discussing the beta on the developer forums: http://devforums.apple.com/

Can you please please please bring the ARTWORK VIEWER back

It's all well and good making itunes fancy and looking cool and interactive for people who have a couple of albums.
but this is a utility I have to use for my ipod and you're crippling my ability to keep my rather large library sorted in a quick and effecient way.
The only real way to do that is in the songs view. and now I can niether see the art of what's currently playing at a decent size, or view the artwork of a track different to one of that I'm playing. And believe it or not, i like to listen to music while i sort and add new music.
It's been getting progressively worse with each release. As new versions came out it made it look like the track i was playing had no artwork which was crazy. surely a bug and not deliberate.
Cover flow was also a nice enough touch aesthetically, and relatively useful, and further more it was an optional addition to the old school songs view.
just seems crazy and unnecessary to take this stuff out, especially when they leave half of it in. why bother keeping any at all

Please remove all this info. It is not allowed on this forum.
The reason I asked is because then I could have provided you the link of the documentation on Oracle website.
Please edit and remove all the information, just let me know whether it is SQL or PL/SQL or Forms or Reports.

Repeat Delta in case we loss the data from BWP

Dear Experts
I am facing a critical Problem related to Delta records uploading in BWP server. I have uploaded the Delta records yesterday (16.06.2011) in the Morning from (6.00A.M. to 14.00P.M) and pull the delta records in SAPBW. then in the night due to some reason our BWP server crashed. Now its Up and the data is restored upto 16.06.2011 Morning upto 06.00 A.M. i.e. before the execution of process chains on 16.01.2011 . My Question is
1. If I execute the Process chains today will it breing the Delta records of 16.06.2011 as well (Repeat delta) Automatically or do i have to perform some configration.
2. Whether the Repeat delta is possible only if we make the request RED and not when we loose the data as we have.
Pl advice Urgently........................
Thanks in advance.
Dinesh Sharma

1. delta load done to PSA. records edited and loaded to targets.
2. repeat delta done to PSA. It contains all records from step 1 and any new records written to delta queue. this is deleted.
3. Next day repeat happens. This brings records from step 2 (already has records from step 1) and any new records written to delta queue.
The procedure followed was not correct and hence resulted in duplicates. When a repeat delta is done, the delta records from the previous delta request will be fetched along with any new records that have come into the queue after that.

The folder path 'C:' contains an invalid character.

"The folder path 'C:' contains an invalid character."
I get this error message whenever I try to install iTunes 7.0.2.16 (the most recent version). I tell it to install with all the default paths, options, everything. I have tried changing the path to see if that fixes it but it unfortunately seems to have no effect on it.

i'm about two months out of date with the state of the art on treatments for this particular one. but there's a few possibilities we can follow up on until someone more up to date on this comes to rescue us.
let's first check on the InstallShield advice for the 1324 error. (you're not getting that number, but the error message is often a 1324 in disguise.)
see:
Error -1324: The Folder Path Contains an Invalid Character
if no joy there, we'll try the advice from the following MS kbase article. (although it's about a different application, it has been of some help in the past with this sort of error.)
You may receive one of three error messages when you try to install Streets and Trips or MapPoint
(typically i turn to that latter on when the invalid character message cites the My Pictures folder ... but it's probably worth a crack nonetheless.)

Records got deleted from Repeat Delta

Hi,
Friends record got deleted from Repeat Delta also , how can we get back it , is there any way.??
Thanks.
Asim

Hi,
Goto RSA7 in ECC and see findout your DataSource and select it an dclick on Display Data Icon then select Repeate Delta and see the records are there or not?., If it won't contains then only you confirm the data is deleted from Repeat Delta.
If you lost this data then you need to go for Reint or Init without Data and then Full and then set Delta.
Thanks
Reddy

For my Rapid Video Blogging I would like to bring the traffic from You Tube

I hear there are sites as complicated and financially up there, Blogcasts, and all kind of sites that I could try to get involved with to have a place where I can try to get the traffic from watching the Video Rapid Blogs. I am not sure of the technology, from simple sites to a full on website. Does anybody have this knowledge so I could get going on getting this set up. I would need some site to bring the traffic to where what I am selling is and hopefully have a good response.
I am brand new at all of this but I have the academic and practical knowledge-working for years in teaching at the college level in exercise physiology, have gone on to get my registered dietician degree so I left school when I was done, put a small studio together where I worked mostly with memdical doctor's referrals since I had been around the rehab docs during my rotation for my exercise physiology degree.
I love the studio, but all my bad technique when I was young and my sport injuries all hit at once. I developed brain CA, had some chemo and radiation. I had to close the studio but I still have to live so I am thinking this rapid video blogging, put out some 3 minute video blogs supporting my ability to help some people who tried all kinds of weight loss methods, work with the tried and true wy but add the psych in that which can help them not expect quick-fixes, not support nutrition bars that do not fit in until they are egged in a exercise program, get rid of all the stuff 24 hour fitness tries to sell them unless they want to know how many steps they take. I could put some 3-4 minute video blogs together bringing the potential customers back to my website or whatever kind of site i would need. i m not up-to-date on all the various site for stuff like this, but if anybody want s to help e get an awareness of what is out there available to me, I would appreciate if anybody has the knowledge and practice in these areas of websites, blog sites, to help me put some classy, straight to-the-pont video info together, I would really appreciate it. I keep reading about blog spots,mad a;; types of things like websites where iI could push the traffic fro You Tube bak to this site for some sales.

I dont understand anything you said in your post.
Do you have a specific question about video production?
The forums are for individual technical or creative issues that users have with video production. I am sur someone will be able to help you, but and to get a response it is best to ask a specific question.
Is this about a technical problem you have or something about setting up a web site? If its the latter this is the wrong forum.

SQLException : query java.sql.SQLException: ORA-00911: invalid character

Hi folks
I am not sure why this is happening. Only thing I can think of is field table_name has spaces then when I tried trim it does not like it.
Please help
Thanks a lot!
--------Here's the code ---------------
I have simple query (oracle database table names to extract and count the number of rows in each table) . This is the code snippet.
try { // creating a table in the database
// querying mytable
String query;
query = "select table_name from user_tables;";
ResultSet rs = stmt1.executeQuery(query);
ResultSet rs1 =null;
Statement stmt2 = null;
while (rs.next())
System.out.println("table name : " + rs.getString(1) );
rs1 = stmt2.executeQuery("select count(*) from " + rs.getString(1));
} catch (SQLException e)
{ System.out.println("SQLException : query " + e);
}

ORA-00911 invalid character
Cause: Special characters are valid only in certain places. If special characters other than $, _, and # are used in a name and the name is not enclosed in double quotation marks (�), this message will be issued. One exception to this rule is for database names; in this case, double quotes are stripped out and ignored.
Action: Remove the invalid character from the statement or enclose the object name in double quotation marks.
So, I think you problem is a semicolon at then end of your query.
Hope this helps,
Boris

Calling SP results in ORA-00911: invalid character

I am testing a supposedly very simple stored procedure in XE. It compiles with no errors but when I enter the following command in the SQL Command window I get an ORA-00911: invalid character.
call get_all_customer_orgs;
The get_all_customer_orgs procedure is defined as...
create or replace procedure get_all_customer_orgs (p_recordset out sys_refcursor)
is
begin
open p_recordset for
select * from customerorgs;
end get_all_customer_orgs;
I don't understand what the invalid character could be. Guidance? Thanks.

I don't have XE handy, but your procedure works from SQL Plus (changing the table to emp).
SQL> create or replace procedure get_all_customer_orgs (p_recordset out sys_refcursor)
2 is
3 begin
4 open p_recordset for
5 select empno,ename from emp;
6 end get_all_customer_orgs;
7 /
Procedure created.
SQL> var allemps refcursor
SQL> exec get_all_customer_orgs(:allemps);
PL/SQL procedure successfully completed.
SQL> print allemps
               EMPNO ENAME
                7369 SMITH
                7499 ALLEN
                7521 WARD
                7566 JONES
                7654 MARTIN
                7698 BLAKE
                7782 CLARK
                7788 SCOTT
                7839 KING
                7844 TURNER
                7876 ADAMS
                7900 JAMES
                7902 FORD
                7934 MILLER
14 rows selected.

Bringing an internal drive back online without rebooting?

I currently have (4) internal 1TB drives, (3) of which are backed up via Time Machine (NAS connected via iSCSI). I'm in the process of adding a large external Raid-5 array and plan to use it in place of the internal drive w/o backup. This frees up one internal drive. I was thinking of using this as a bootable backup, cloned from the main boot drive with SuperDuper. When the computer first boots up, this boot drive clone is available in case the main boot drive fails. Once running, I want to take the clone drive off line to maximize it's life, reduce the heat load, etc. Problem is, how do I bring the clone drive back online for nightly SuperDuper cloning without rebooting?

NAS connected via iSCSI
Umm, if it's iSCSI, it isn't NAS, but that's beside the point.
how do I bring the clone drive back online for nightly SuperDuper cloning without rebooting
via either Disk Utility.app, or the command line equivalent diskutil
$ diskutil mount
Disk Utility Tool
Usage: diskutil mount \[readOnly\] MountPoint|DiskIdentifier|DeviceNode
diskutil mountDisk MountPoint|DiskIdentifier|DeviceNode
diskutil u[n]mount \[force\] MountPoint|DiskIdentifier|DeviceNode
diskutil u[n]mountDisk \[force\] MountPoint|DiskIdentifier|DeviceNode
diskutil eject MountPoint|DiskIdentifier|DeviceNode
Mount, unmount or eject local disks or volumes.
Unmount also works on network volumes.
MountDisk and unmountDisk will operate on all partitions of that disk.
Example: diskutil unmount /Volumes/SomeDisk

Repeat Delta is bringing the invalid character back to BI

Similar Messages

Maybe you are looking for