Repeat "Detail a" section when using "Format with Multiple Columns" layout
I am using Crystal Reports for .NET (VS 2008) and I would like to get the "Detail a" section to repeat at top of a second column containing additional data in "Detail b" section. Please see below for example, specifically "Detail a (2)". Any tips or help much appreciated.
Detail a (1)_____Detail a (2)
Detail b (1-1)___Detail b (2-3)
Detail b (1-2)___Detail b (2-4)
--Detail b (1-3)___Detail a (3)
Detail a (2)______--Detail b (3-1)
--Detail b (2-1)
--Detail b (2-2)
Thx, Scott
the format with multiple columns i dont believe will show you the value 2x, but allows you to display the values across instead of down.
i think you may want to use a sub report
Similar Messages
-
Post Author: vman
CA Forum: General
I am working a report that has had the details section format with multiple columns selected. I want to change the report and remove the check box, but it is grayed out. How can I get the report details section back to default without the detail size constraints?Post Author: rcoleman
CA Forum: General
Bearing in mind that I'm a relative newbie to the report writing/Crystal world...the only thing I can think of is that maybe the report was written using an older version of Crystal and this option wasn't available. Another possibility, if it's a sub-report, you might try making a copy of the sub-report saving it with the same name, deleting the old sub-report, replacing it with the copy you made. I know that has worked for me when I've had problems with the re-import when opening is greyed out. -
Hi Crystal gurus.
I'm having the report which consist of more that 500 rows , so therefore I decided to implement "Format with multiple rows" feature, which is available in Section Expert area. Everything is just fine, I'm getting multiple columns, but how to suppress the header which is not needed for the last page, because the records are only in the first column.
I can easily copy/paste the header as such, but I do not know how to suppress it. Tried to search here, but found nothing.
Many thanks in advance McmerphyIf it truely is the last page of the report, you could try a conditional suppression where pagenumber = totalpagecount. But this would always suppress the header selected for suppression, and if you should get another column on the last page, it will still suppress.
Debi -
Label Column When Formatting With Mutliple Columns
When creating a report with multiple columns (setting the Format With Multiple Columns property in the Details section), is it possible to put a label column on the left side of the page, followed by multiple data columns? The idea would be something like this:
8/1/08 8/2/08 8/3/08 8/4/08 8/5/08
====== ====== ====== ====== ======
Metric Label 1 C1D1 C2D1 C3D1 C4D1 C5D1
Metric Label 2 C1D2 C2D2 C3D2 C4D2 C5D2
Metric Label 3 C1D3 C2D3 C3D3 C4D3 C5D3
Metric Label 4 C1D4 C2D4 C3D4 C4D4 C5D4
Metric Label 5 C1D5 C2D5 C3D5 C4D5 C5D5
The date on top will be a group 1 header. The metric labels to the left will be detail rows.
Fuskie
Who is turning once again to the CR Gurus...Hi Fuskie,
A quick suggestion will be to use a cross-tab instead of multiple columns to generate the desired output.
Another suggestion will be to use a subreport. The main report will be used to type the labels on the left side, and the subreport will be used to display the multiple columns information.
1. Create a report that will be used as a container for your multiple column report.
2. Add labels in the Report Footer of the report.
3. Insert your multiple columns report has a subreport in the Report Footer on the right of the labels
you created in the main report. On the main report
In the subreport, if you want to see the Group to appear as columns at the the top, you will have to include the group in the multiple-columns, and I will suggest to format the Group Footer with the option "Print at the Bottom of Page". This will ensure that your Group Header will always appear at the top like in a cross-tab, otherwise, it might display your data like:
8/1/08 C2D3
===== C2D1
Metric Label 1 C1D1 C2D1
Metric Label 2 C1D2 C2D2
Metric Label 3 C1D3 C2D3
Metric Label 4 C1D4
8/2/08
====
C2D1
C2D2 -
When using pdfFactory with Firefox, why are the colors on the pdf not correct?
The colors are vastly different when using pdf Factory with Firefox. When using pdfFactory with IE, they are both the same.
There doesn't seem to be a one-size-fits-all answer, because what works for one printer doesn't necessarily work for another, and I don't have your printer so I can't advise on specifics...
However, perhaps we can discover a set of settings that will work...
If you File - Print, choose Photoshop Manages Colors, in the Printer Profile section do you see profiles specific to your printer (e.g., with the name Kodak in them)?
If so, choose one of them that seems appropriate given the paper you're using.
If not, try choosing sRGB IEC61966-2.1.
Now, before you continue, press the [Print Settings...] button. This brings up the printer driver dialog. You may have to go through [Advanced] buttons or whatever, but what you're looking to do here is to disable the printer driver's color management logic. In other words, if you can find a color-management / ICC profile handling section, set it to "no color management" or equivalent. OK back out to Photoshop's print dialog, then press [Print].
The key here is that if Photoshop manages the color transforms, the printer driver should not be set to do so - or vice versa.
If you're presented with the printer driver's dialog again, double check that the settings you chose above are still set, for good measure, and try a test print.
-Noel -
Best practice when using Tangosol with an app server
Hi,
I'm wondering what is the best practice when using Tangosol with an app server (Websphere 6.1 in this case). I've been able to set it up using the resource adapter, tried using distributed transactions and it appears to work as expected - I've also been able to see cache data from another app server instance.
However, it appears that cache data vanishes after a while. I've not yet been able to put my finger on when, but garbage collection is a possibility I've come to suspect.
Data in the cache survives the removal of the EJB, but somewhere later down the line it appear to vanish. I'm not aware of any expiry settings for the cache that would explain this (to the best of my understanding the default is "no expiry"), so GC came to mind. Would this be the explanation?
If that would be the explanation, what would be a better way to keep the cache from being subject to GC - to have a "startup class" in the app server that holds on to the cache object, or would there be other ways? Currently the EJB calls getCacheAdapter, so I guess Bad Things may happen when the EJB is removed...
Best regards,
/PerHi Gene,
I found the configuration file embedded in coherence.jar. Am I supposed to replace it and re-package coherence.jar?
If I put it elsewhere (in the "classpath") - is there a way I can be sure that it has been found by Coherence (like a message in the standard output stream)? My experience with Websphere is that "classpath" is a rather ...vague concept, we use the J2CA adapter which most probably has a different class loader than the EAR that contains the EJB, and I would rather avoid to do a lot of trial/error corrections to a file just to find that it's not actually been used.
Anyway, at this stage my tests are still focused on distributed transactions/2PC/commit/rollback/recovery, and we're nowhere near 10,000 objects. As a matter of fact, we haven't had more than 1024 objects in these app servers. In the typical scenario where I've seen objects "fade away", there has been only one or two objects in the test data. And they both disappear...
Still confused,
/Per -
Display "blank-out" when using Maya with a GF 7800?
I have a problem where my LCD display occasionally blinks off for about 5-10 seconds when using Maya with a scene displaying about 100,000 polys. Has anyone else encountered this? This only seems to happen when I am quickly rotating the camera in a grey shaded perspective panel?
My LCD is a Dell 20" LCD (set at 1600x1200) connected to a Geforce 7800 in a Quad G5 with 4.5GB of ram.
I have never seen this issue before in Maya (I have been using Maya for years, on other machines), so I suspect it is hardware or driver related?OK, have completed several tests. I definately seems that the my Geforce 7800 has problems when running some applications. I wonder if anyone else has encountered this problem?
The easiest way to cause the display to momentarily shut off is to use Maya in the full screen perspective camera window in shaded mode. Proceed to rapidly move a 20,000 poly model (or greater) both zooming and rotating (the polys need to fill the entire screen and shake the mouse).My display (Dell 20" 2001fp) will blink-off for a few seconds. Of course, this in not "normal" work flow, but I have this issue happening when working normally, it can sometimes take time to occur.
I have tried the Geforce 6600 (256mb ver) and this does not occur with that video card. I have tried several mice both wired and wireless, plus changed the Energy Saver options for Processor performance (from comments I read on Macintouch.com). The problem is consistent to my Geforce 7800. This problem will also occur in Photoshop CS, by moving images and resizing, but I found it much harder to induce. -
When using iPhone with Ford Automobiles' SYNC, the connection drops each time the ignition is shut off. To restore, you must turn off the bluetooth on iPhone, then restart each time. Any suggestions?
There is an update avaialbe for Ford systems to correct bluetooth problems. You need to update your system.
-
When using Numbers with iCloud, a new version is created every time I make a change. I do not want all these revised documents. When I change a document, I commit to that change. How do I shut off this multiple-revision feature of Numbers being pushed to iCloud.
Also....
When using Numbers with iCloud, a new version of the spreadsheet is created even when no revisions have been made. Why is this, and how do I make it stop?
My files are growing.Your plugins list shows outdated plugin(s) with known security and stability risks.
# Java Plug-in 1.5.0_11 for Netscape Navigator (DLL Helper)
# Adobe Shockwave for Director Netscape plug-in, version 11.0
Update the [[Java]] and [[Shockwave|Shockwave for Director]] plugin to the latest version.
See
http://java.sun.com/javase/downloads/index.jsp#jdk (you need JRE)
http://www.adobe.com/shockwave/welcome/ -
Only 274 mails are coming when using pop3 with java mail
Only 274 mails are coming from GMAIL when using pop3 with java mail. but there are more than 3000 mails.
I'm not getting the reason, code is given below:
public static void main(String[] args) {
// SUBSTITUTE YOUR ISP's POP3 SERVER HERE!!!
// String host = "pop.bizmail.yahoo.com";
// final String user = "[email protected]";
// final String password = "xxx";
String host = "pop.gmail.com";
final String user = "gauravjlj";
final String password = "xxx";
String subjectSubstringToSearch = "Test E-Mail through Java";
try {
Properties prop = new Properties();
prop.setProperty("mail.pop3.socketFactory.class",
"javax.net.ssl.SSLSocketFactory");
prop.setProperty("mail.pop3.socketFactory.fallback", "false");
prop.setProperty("mail.pop3.port", "995");
prop.setProperty("mail.pop3.socketFactory.port", "995");
prop.put("mail.pop3.host", host);
prop.put("mail.store.protocol", "pop3");
Session session = Session.getDefaultInstance(prop);
Store store = session.getStore();
System.out.println("your ID is : "+ user);
System.out.println("Connecting...");
store.connect(host, user, password);
System.out.println("Connected...");
// Get "INBOX"
Folder fldr = store.getFolder("INBOX");
fldr.open(Folder.READ_ONLY);
int count = fldr.getMessageCount();
System.out.println(count + " total messages");
// Message numebers start at 1
for(int i = 1; i <= count; i++) {
// Get a message by its sequence number
Message m = fldr.getMessage(i);
// Get some headers
Date date = m.getSentDate();
Address [] from = m.getFrom();
String subj = m.getSubject();
String mimeType = m.getContentType();
System.out.println(date + "\t" + from[0] + "\t" +
subj + "\t" + mimeType);
// Search for e-mails by some subject substring
String pattern = subjectSubstringToSearch;
SubjectTerm st = new SubjectTerm(pattern);
// Get some message references
Message [] found = fldr.search(st);
System.out.println(found.length +
" messages matched Subject pattern \"" +
pattern + "\"");
for (int i = 0; i < found.length; i++) {
Message m = found;
// Get some headers
Date date = m.getSentDate();
Address [] from = m.getFrom();
String subj = m.getSubject();
String mimeType = m.getContentType();
System.out.println(date + "\t" + from[0] + "\t" +
subj + "\t" + mimeType);
Object o = m.getContent();
if (o instanceof String) {
System.out.println("**This is a String Message**");
System.out.println((String)o);
else if (o instanceof Multipart) {
System.out.print("**This is a Multipart Message. ");
Multipart mp = (Multipart)o;
int count3 = mp.getCount();
System.out.println("It has " + count3 +
" BodyParts in it**");
for (int j = 0; j < count3; j++) {
// Part are numbered starting at 0
BodyPart b = mp.getBodyPart(j);
String mimeType2 = b.getContentType();
System.out.println( "BodyPart " + (j + 1) +
" is of MimeType " + mimeType);
Object o2 = b.getContent();
if (o2 instanceof String) {
System.out.println("**This is a String BodyPart**");
System.out.println((String)o2);
else if (o2 instanceof Multipart) {
System.out.print(
"**This BodyPart is a nested Multipart. ");
Multipart mp2 = (Multipart)o2;
int count2 = mp2.getCount();
System.out.println("It has " + count2 +
"further BodyParts in it**");
else if (o2 instanceof InputStream) {
System.out.println(
"**This is an InputStream BodyPart**");
} //End of for
else if (o instanceof InputStream) {
System.out.println("**This is an InputStream message**");
InputStream is = (InputStream)o;
// Assumes character content (not binary images)
int c;
while ((c = is.read()) != -1) {
System.out.write(c);
// Uncomment to set "delete" flag on the message
//m.setFlag(Flags.Flag.DELETED,true);
} //End of for
// "true" actually deletes flagged messages from folder
fldr.close(true);
store.close();
catch (MessagingException mex) {
// Prints all nested (chained) exceptions as well
mex.printStackTrace();
catch (IOException ioex) {
ioex.printStackTrace();
Please tell me.
ThanksIs it possible that GMail only allows access to untagged emails via POP3? Or only to emails from the last x days?
POP3 is the older email retrieval protocol (IMAP4 is the more current one) and only has very limited support for folders (or anything but a single inbox, really). It's quite common that POP3 only allows access to a subset of all emails stored by a provider. -
How to store a layout, when using CL_SALV_TREE with a container?
Hello,
I'd like to use an object of type CL_SALV_TREE, that is placed on a custom container (and therefore not displayed in fullscreen).
But how do I get the functionality to store a layout, when using CL_SALV_TREE not in fullscreen mode? If you use it in fullscreen mode, you just have to define the function code in your gui status and everything is ok.
But since I want to place my CL_SALV_TREE on a custom container, that method does not work. If I call <my_salv_tree>->get_functions( ) it returns a table, that holds just six entries. So, the appropiate function for storing a layout does not seem to be in the default set of functions, when using CL_SALV_TREE with a custom container. But how do I activate this function?
I already call the functions get_layout() and set_key() - so that shouldn't be the problem. Or is just not possible to use CL_SALV_TREE on a custom container and have the possibility to store layouts?
Kind regards, LarsHello,
I'd like to use an object of type CL_SALV_TREE, that is placed on a custom container (and therefore not displayed in fullscreen).
But how do I get the functionality to store a layout, when using CL_SALV_TREE not in fullscreen mode? If you use it in fullscreen mode, you just have to define the function code in your gui status and everything is ok.
But since I want to place my CL_SALV_TREE on a custom container, that method does not work. If I call <my_salv_tree>->get_functions( ) it returns a table, that holds just six entries. So, the appropiate function for storing a layout does not seem to be in the default set of functions, when using CL_SALV_TREE with a custom container. But how do I activate this function?
I already call the functions get_layout() and set_key() - so that shouldn't be the problem. Or is just not possible to use CL_SALV_TREE on a custom container and have the possibility to store layouts?
Kind regards, Lars -
There is no way to see who is on line when using facebook with iPad 2
There is no way to see who is on line when using facebook with iPad 2 why is that?
I'm guessing you mean for FB Chat? Try the app Friendly.
-
s there a way that when using airplay with power point the ATV does not sleep/screen saver frequently???
I have done this for several Titles, using Photoshop and a Layer Mask, that gets "erased," revealing the letters. My Titles were of "handwriting with chalk" on a blackboard, so I could keep the edge of that Layer Mask, looking more like the "chalk." Photoshop also makes it easy to output Layer Comps for each "step" in the handwriting process. IIRC, I did about 5 Frames per Layer Comp on Import, but do not recall if I used an extremely short Cross-Dissolve Transition between those - I intened to do so, but just do not remember if I liked that, or went with just the Still Images? Will try to find that animation, and maybe create a full tutorial of the process. In my case, I also added an SFX of chalk on a chalkboard.
If you have Photoshop, it's really quite easy to pull off.
Now, I do not know if Photoshop Elements has Layer Masks yet, which make it so very easy to accomplish. One could do it backward, where the Text Layer gets Erased, and then one would have their full Image as the last in the sequence, and then the next would have a little bit of the Text removed, then a bit more, then a bit more - going backward, until the "writing surface" is clean. One could also do this with a Transparent Background, so that one saw the Video below, and no actual "writing surface" visible.
Good luck,
Hunt -
Selectively Format Groups with Multiple Columns
I have a bit of an obscure task I've been trying to hammer out to no avail. I've searched quite a bit but can't seem to find anyone else who has attempted this. I have two group by statements, one is a category and the other is a rank. What I'm trying to do is organize the report so that there are category rows and below each category row is a set of columns for each rank with their associated values as such:
category1
rank1 rank2 rank3 rank4
value1 value1 value1 value1
value2 value2 value2 value2
category2
rank1 rank2 rank3
value1 value1 value1
value2 value2 value2
I've tried using details>Section Expert>>Layout>Format Groups with multiple column. Unfortunately, this applies to both groups putting the categories into columns instead of rows, making a mess. Does anyone know of a way to selectively put groups into columns and ensure alignment? In the above example the user would be able to compare rank values from multiple categories since they all line up. Any help with this would be very much appreciated.Hi,
Have you tried using a crosstab? Give this a shot:
1) Group the report on Category
2) Create a new group header section. Group Header b
3) Place a crosstab in this section
4) The columns would be the Rank field, I'm not sure about what you would like to show in the rows
5) The summarized field would be the Value field ofcourse
Let me know how this goes.
-Abhilash -
APD using Query with multiple structures as a data source
All,
I want to set up an automatic process which executes a query and exports it to a shared drive as a csv file. I have tried various options , when I try to use APD to set up the extract, I get an error and this is because the query that I am trying to use has Strucutres in both rows and columns. Hence, I am unable to use this option. I tried RSCRM_BAPI, It works well, but there is an issue with scheduling this in Process chain. I created an event and scheduled this as a job to trigger after "event" as per SAP instructions, but the job does not exist and it is not possible to trigger it through the Process chain unless the variables are hard coded in the query which I do not want to do.
Can any one tell me if there is a way to deal with APD using Query with multiple structures?
Would really appreciate if some one can give me the right solution...
ThanksHi Tanu ,
APD is an option but its not very good with large amount of data or hiearachies or if you have attributes in you query structure .
One more option for this requirement is use of report program using function module RRW3_GET_QUERY_VIEW_DATA .
This will work fine with multiple structure etc .
There are some overheads with this FM ex: if amount of data is too much then program will give dump .Solution for that is we call the FM in LOOP by diving amount of data need to be fetched .ex: we can read data quarter wise.
For using this function module what you can do is write an ABAP program (At SE38 ) .which will call this FM and then write the output into a flat file which you can save at application server (AL11) .From there other system can read it .
To automate this whole process you can further add all the report programs into a process chain (RSPC) which can be schedule as per requirement .
To pass input parameters you can use variants that will pass the values to the report .
Check thi link for sample code :
[http://www.tricktresor.de/content/index.php?navID=696&aID=496]
Hope this will be helpful .
Regards,
Jaya Tiwari
Maybe you are looking for
-
my itunes will not update keeps comming up with a error when dloading the latest version now my iphone4s wont sync as it has the latest software
-
I can't put websites on my bookmarks toolbar
I have a work laptop and every year they clear the memory. When I went to set up Firefox with my bookmarks toolbar, it doesn't work. I have the toolbar, but when I try to drag the website icon to the toolbar, a circle with a slash through it appears
-
Can I have music play on my site through all the pages?
I figured out how to add a song to a specific page but I would like to know if there is a way to have a series of songs start playing when someone enters my site and keep playing as they navigate through the pictures, pages, etc. I just got a MacBook
-
Swedish letters disapears. Hi. I have a nice flash menu that I have used for some time. I have used some swedish letters that do not show up in the swf-file. These letter are, "ö" and "ä". The menu items is based on Actionscript. The files can be dow
-
Something is eating up all my memory on IPad air
Something is eating up all my memory on IPad air. I have deleted everything I can but it is still full. Took away pictures, videos, apps, movies, music etc... but somewhere something is still installed that is eating up the memory. Where do I look? A