Repeat email output for purchase order
Hi all,
I have an email output (ZMAL)) that sends a notification from purchase order when the total value exceed $50,000 at creation of PO. This works fine. However, during ME22N, when the total po value goes from intial $30,000 to $60,000, at saving, it should email out a notification but it does not as initial output ZMAL was created at po creation.
Q: How can i get the notification to send out automatically the second time or third time when the condition exceeding $50,000
is met ?
If i create another output ZMAL manually in PO, then i can resend ZMAIL.
The condition checking is made in 'EXIT_SAPMM06E_012 in Include ZXM06U43.
Pls provide any suggestions you have.
thanks
Joyce
Hi,
Does the output type get triggered for the first time automatically? Instead of writing the condition in enhancement, it is recommended to write the output type determining conditions in Output type Requirement routine.
NACE -> Select application -> Click on Procedures -> select procedure -> Click on Control -> Insert record for the output type -> Create routine and assign .
Check standard output procedure of Purchase order "RMBEF1" to get an idea.
Regards
Vinod
Similar Messages
-
Message Output for purchase order
Dear SAP Expert,
We have defined the message output type for purchase order document type XX with special function. We have maintained condition record for the same. It is working fine.
Now we have defined another output type for another PO document type YYwith special function by copying earlier one.
But message output is not genarated in case of YY document type.
Please tell us what we have missed out.
Thanks & Regards,
Reva.Hi Reva,
In ME22N for your PO, click on the Messages button. Then click on the blue information button - this should display the output determination analysis for the order, and will show you which output determination procedure was used, which output type and access sequence was processed and whether the system was able to find a matching record. At the lowest level of detail it will show you the keys that were used to read the condition records. All this information should help you to determine why a condition record could not be found for the purchase order.
Regards,
Monika -
Email Alert for Purchase Order Release
Hi,
When a PO is subject to release I would like an external email to be sent to the relevant user as per assignments in config.
I have used standard workflow for PO release and this is working with no problems, alerts successfully going to the workflow inbox.
But does anyone know the steps to configure the standard workflow so that an external email is sent?
Thankshi
WORKFLOW FOR PO RELEASE PROCEDURE
Steps involved are :
1) SPRO > MM > Purchasing > Purchase Order > Release Procedure for Purchase Orders > Define Release Procedure for Purchase Orders > Release Codes > here assign Workflow indicator as "1" against each Release Code
2) SPRO > MM > Purchasing > Purchase Order > Release Procedure for Purchase Orders > Define Release Procedure for Purchase Orders > Workflow > Here against each release code assign OT as US and respective User ID's for Release Codes.
3) Go to OOCU > here under MM, go to MM-PUR,
4) Click on "activate event linking"
5) Go for "WS 20000075" and for BUS2012 RELEASESTEPCREATED, click on Detailed view button. Activate "Event linkage activated" and also activate "Enable usage of event queue"
and Save.
6) Click on "Assign agents" and proceed all above steps.
BUS2012 is the relevant business object and Releasestep created is the event for the same.
7) Check SWETYPV transaction for the WF you have activated for BUS2012 and confirm.
Test the same by creating a PO and check the SBWP for SAP Mail of respective Users
regards
KI -
Processing log output for Purchase order
Dear All,
Iam getting some problem when iam creating an IDOC and checking in the Processing log for IDOC number.
Actually i had created one custom idoc for Purchase order since my client need only some field and in one line for header and line item, I had done it and i can see it in sdata of EDIDD structure. When i create a Purchase order and save it an idoc number is posting and I can see this file in my physical directory indeed.
Now when iam going into change mode of PO ME22n to see the Processing LOG, It is not showing the IDOC Number in Purchase order output processing log popup.The processing log will only show output based standard output control (Table NAST).
How is your IDoc being created. Via a user exit, BADI. If so then they will not appear on the processing log.
It is being created as a custom IDOC for which i had written a Z function module and given that in PO processing code which is ME10. When iam checking the standard IDOC for PO it is generating the IDOC in processing log as well.
Iam just placing my code just have a look at it and suggest if any thing needs to be done.
FUNCTION Z_IDOC_OUTPUT_ORDERS.
""Local Interface:
*" IMPORTING
*" VALUE(OBJECT) LIKE NAST STRUCTURE NAST
*" VALUE(CONTROL_RECORD_IN) LIKE EDIDC STRUCTURE EDIDC
*" EXPORTING
*" VALUE(OBJECT_TYPE) LIKE WFAS1-ASGTP
*" VALUE(CONTROL_RECORD_OUT) LIKE EDIDC STRUCTURE EDIDC
*" TABLES
*" INT_EDIDD STRUCTURE EDIDD
*" EXCEPTIONS
*" ERROR_MESSAGE_RECEIVED
*" DATA_NOT_RELEVANT_FOR_SENDING
DATA: xdruvo. "Druckvorgang
DATA: neu VALUE '1', "Neudruck
h_kappl LIKE nast-kappl, "Hilfsfeld Applikation
h_parvw LIKE ekpa-parvw, "Hilfsfeld Partnerrolle
h_ebeln LIKE ekko-ebeln. "Hilfsfeld Belegnummer
CLEAR control_record_out.
xdruvo = neu.
h_kappl = object-kappl.
h_ebeln = object-objky.
h_parvw = object-parvw.
DATA:
LT_EDIDC LIKE EDIDC OCCURS 0 WITH HEADER LINE,
L_EDIDC LIKE EDIDC,
L_SEND_FLAG,
W_SDATA LIKE EDIDD-SDATA.
DATA: T_BDI_MODEL LIKE BDI_MODEL OCCURS 0 WITH HEADER LINE.
DATA: T_EDIDC LIKE EDIDC OCCURS 0 WITH HEADER LINE.
DATA: T_EDIDD LIKE EDIDD OCCURS 0 WITH HEADER LINE.
DATA: C_MESSAGE_TYPE LIKE EDIDC-MESTYP VALUE 'ZORDER'.
*- Call function module to determine if message is to be distributed
OBJECT_TYPE = 'BUS2012'.
MOVE control_record_in TO control_record_out.
CALL FUNCTION 'ALE_MODEL_DETERMINE_IF_TO_SEND'
EXPORTING
MESSAGE_TYPE = C_MESSAGE_TYPE
IMPORTING
IDOC_MUST_BE_SENT = L_SEND_FLAG.
EXCEPTIONS
OWN_SYSTEM_NOT_DEFINED = 1
OTHERS = 2.
DATA : BEGIN OF EKKO_tAB OCCURS 0,
EBELN LIKE EKKO-EBELN,
F1 TYPE C VALUE ',',
BUKRS LIKE EKKO-BUKRS,
F2 TYPE C VALUE ',',
BSART LIKE EKKO-BSART,
F3 TYPE C VALUE ',',
LIFNR LIKE EKKO-LIFNR,
F4 TYPE C VALUE ',',
WAERS LIKE EKKO-WAERS,
F5 TYPE C VALUE ',',
BEDAT LIKE EKKO-BEDAT,
F6 TYPE C VALUE ',',
WERKS LIKE EKPO-WERKS,
F7 TYPE C VALUE ',',
PLIFZ LIKE EKPO-PLIFZ,
F8 TYPE C VALUE ',',
EBELP LIKE EKPO-EBELP,
F9 TYPE C VALUE ',',
MATNR LIKE EKPO-MATNR,
F10 TYPE C VALUE ',',
MENGE LIKE EKPO-MENGE,
F11 TYPE C VALUE ',',
MEINS LIKE EKPO-MEINS,
F12 TYPE C VALUE ',',
END OF EKKO_TAB.
DATA SDATA1 LIKE EKKO_tAB OCCURS 0 WITH HEADER LINE.
DATA EBELN LIKE EKKO-EBELN.
WRITE OBJECT-OBJKY TO EBELN.
SELECT T1EBELN T1BUKRS BSART LIFNR WAERS BEDAT WERKS PLIFZ EBELP MATNR MENGE MEINS
FROM EKKO AS T1
INNER JOIN EKPO AS T2 ON T2EBELN = t1EBELN
INTO CORRESPONDING FIELDS OF TABLE EKKO_tAB
WHERE
*T1~KAPPL = 'EF' AND
T1~EBELN = EBELN.
*T1~KSCHL = 'YEDI' .
DATA SDATA LIKE EDIDD-SDATA.
DATA NDATE LIKE SY-DATUM.
DATA NMENGE(17) TYPE C.
LOOP AT EKKO_tAB.
WRITE EKKO_TAB-MENGE TO NMENGE.
NDATE = EKKO_tAB-BEDAT + EKKO_tAB-PLIFZ.
CONCATENATE EKKO_tAB-EBELP ',' EKKO_tAB-BUKRS ',' EKKO_tAB-BSART EKKO_tAB-EBELN ',' EKKO_tAB-LIFNR ',' EKKO_tAB-BEDAT ','
NDATE ',' EKKO_tAB-BSART EKKO_tAB-EBELN ',' EKKO_tAB-EBELN ', 0,' EKKO_tAB-MATNR ','
NMENGE ',' EKKO_tAB-MEINS ',' EKKO_tAB-WERKS INTO SDATA.
MOVE SDATA TO: W_SDATA, T_EDIDD-SDATA.
MOVE 'ZORDERS' TO T_EDIDD-SEGNAM.
APPEND T_EDIDD.
ENDLOOP.
*call function 'L_IDOC_SEGMENT_CREATE'
exporting
i_segnam = 'ZORDERS'
i_sdata = w_sdata
exceptions
others = 1.
*LT_EDIDC
call function 'L_IDOC_SEND'
tables
t_comm_idoc = LT_EDIDC
exceptions
error_distribute_idoc = 1
others = 2.
*DATA T_BDI_MODEL LIKE BDI_MODEL.
WRITE OBJECT-OBJKY TO T_BDI_MODEL.
READ TABLE T_BDI_MODEL INDEX 1. " maximum 1 recipient
L_EDIDC-DIRECT = 1.
L_EDIDC-DOCNUM = DOCNUM. "***
L_EDIDC-RCVPRN = 'HCM_00_785'.
L_EDIDC-RCVPOR = 'MM_PO_FILO'.
MOVE 'ZORDER' TO L_EDIDC-MESTYP.
MOVE 'ZPURIDOC' TO L_EDIDC-IDOCTP.
MOVE 'LS' TO L_EDIDC-RCVPRT.
MOVE T_BDI_MODEL-RCVSYSTEM TO L_EDIDC-RCVPRN.
*MOVE-CORRESPONDING L_EDIDC TO W_EDIDC.
*- Distribute the iDoc
BREAK-POINT.
CALL FUNCTION 'MASTER_IDOC_DISTRIBUTE' "IN UPDATE TASK
EXPORTING
MASTER_IDOC_CONTROL = L_EDIDC
TABLES
COMMUNICATION_IDOC_CONTROL = LT_EDIDC
MASTER_IDOC_DATA = T_EDIDD
EXCEPTIONS
ERROR_IN_IDOC_CONTROL = 01
ERROR_WRITING_IDOC_STATUS = 02
ERROR_IN_IDOC_DATA = 03
SENDING_LOGICAL_SYSTEM_UNKNOWN = 04.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE LT_EDIDC INDEX 1.
control_record_out-direct = '1'.
CONTROL_RECORD_OUT-DOCNUM = DOCNUM. " ***
control_record_out-serial = sy-datum.
control_record_out-serial+8 = sy-uzeit.
control_record_out-mestyp = LT_EDIDC-mestyp.
control_record_out-idoctp = LT_EDIDC-idoctp.
control_record_out-SNDPRN = 'HCM_00_786'.
MOVE 'MM_PO_FILO' TO control_record_out-RCVPOR.
MOVE 'LI' TO control_record_out-SNDPRT.
MOVE 'SAPQIS' TO control_record_out-SNDPOR.
ENDFUNCTION. -
PDF form as email attachment for purchase order
Hello All,
I need send to send the PDF based form as an email attachemnt when ever a new PO is created, I have already created a form thru SFP tcode and set the message type for PO and getting the PDF based form as output in the preview.
Could any one suggest me where to put the code to send the generated PDF as a mail when I set the message output type medium to 'External send' for the purchase order.
Regards,
Phanihi Phani,
with regard to your problem I would suggest you to please go thru this link.
Hope this would be helpful to you.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/offline%20interactive%20pdf%20form%20using%20e-mail.pdf
Thanks,
kris -
Suppressing Output for Purchase Order changes to Vendors
Hi There,
Can someone please advice what is the best way to supress an output to a vendor that only relates to changes made to a Purchase Order. We need to limit this suppression to one document type.
Any help appreciated.
Many Thanks
UzzyNormally you can define requirements routines. There you could e.g. check for document type and for the transaction code (SY-TCODE). From the transaction code it should be possible to see if the documnet is created or changed.
-
How to see the changed output for purchase order
Hi..
I have zmedruck. i need to increse item text lengh. i done this in editor. how to see the changed output now...I increased the length of text to be displayed. I checked the print preview in me23n. i cant see the increased length. Guide me where i am wrong.
Edited by: Meena 303 on May 1, 2008 6:24 PMHi
In ME22N go to message -
> select old message -
>click change OutPut button -
> Save
then see print priview through ME9F or ME22N it sself.
regards
Sachin -
Debugging EDI output (IDOC creation) for purchase order...
Hi,
We have a EDI output type defined for Purchase order. When I go to Messages tab in ME22N transaction and repeat the EDI output and save it, it creates a IDOC which I can see using transaction WE02.
Now the problem is there is a user exit which I know gets triggered, when the IDOC is created for this PO. When we do some changes in this user exit, I see those changes are reflected when new IDOC is created. But if I put breakpoint, and do repeat output -> save, the debugger does not stop there.
Is there is some technique I can see the breakpoint stoppage in user exit for IDOC creation during EDI output for Purchase order ?
Regards,
RajeshHi
Youc can set the output Peridoically (After Giving the output type, set the furthere data as periodic).
Save.
Set the break point in your user exit.
Go to se 38 -> Run RSNAST00,
Give the object id (Your PO #)
Give the output type and execute, the control will stop at break point.
Regards,
Baburaj -
Output determination for purchase order
Dear friends,
Please help me, how to create condition record for both printout and email for output determination of standard PO.
I have created condition record through MN04 for Purchase order with medium(external send) and it worked.
I also need to create condition record for printout. Because Client wants to select either email,fax or printout. They will select whatever sending option.when i tried to create condition record for medium(1-printout).I got an error " The condition record entered already exists". So i tried to change that condition record,but i got here also error as "The condition is being processed in the current session".
Please help me to set up condition record for both mail and printout for standard PO.
ThanksFor this kind of option you need diff message type like
use NEU for Fax and Print and for Email create new message type than it will work. -
Badi for emailing the release for purchase order,
hi all,
in me28->release (approve) purchasing documents->release purchasing document..there u have a button (release+save ) button
i want to enhance at that pointi.e when u select the po no and click the button,automatically trigger an email to the vendor.
i tried for enhancement-point,badis,user exits....nothing is getting hit.
plz help,
points wiil be rewarded,
regards,
johnsonHi
In the PO, you maintain output messages for Printing ./ Emailing/ Faxing the Purchase order.
The message has the despatch time maintained.
There are 4 different Depatch times.
1 - Send with periodically scheduled job
2 - Send with job, with additional time specification
3 - Send with application own transaction
4 - Send immediately (when saving the application)
When you select 4 in the message , whne the PO is finally released, the message will be processed automatically.
When you select 3, you need to run ME9F transaction to process the message output.
You can change the message in the PO , by clicking on the message button in ME22N transaction.
So if the user has released the PO in me28 & clicked on Save this will process the message output
Thanks & Regards
Kishore -
Problem in using output type for purchase order
Hi experts,
I am using output type for first time so may be i have done wrong configuration for po output type.The steps i have done are :-
1) Going to tcode NACE->Selected the row u201CEF Purchase Orderu201D and clicked on u201CProcedures".
2) In procedures there are 2 procedures for the application EF (Purchase Order). To proceed further, we would need to find out the procedure that is currently active.Gone to transaction SPRO. In this, navigate as Materials management -> Purchasing ->Messages -> Output control -> Message Determination Schemas ->Define Message Schema for Purchase Order
3) Clicking on u201CAssign Schema to Purchase Orderu201D. So, the procedure RMBEF1 is active for EF (Purchase Order) .
4) Go back to transaction NACE. Select u2018EFu2019 and click on u201COutput typesu201D.
5) Let us use the output type u201CNEU name purchase orderu201D for this purpose. Double-click on NEU.
6) Ensured that the checkboxes u201CAccess to conditionsu201D and u201Cmultiple issuingu201D are checked and the access sequence is 0001(DocType/PurchOrg/Vendor).Only 0001 and 0002 is available in f4 help for this.
7) Now clicked on u201CProcessing Routinesu201D on the left hand side. Ensured that there is an entry for Medium u2018Au2019 (Distribution ALE).
8) After that going back to the main screen of NACE. Select EF (Purchase Order) and clicked on u201CCondition Recordsu201D.
Select NEU and clicked on u201CCondition recordsu201D. The pop-up box appears that gives three radio button option :-
1) Purchasing output determination :purchasing org / vendor for EDI
2) Purchasing output determination :doc. type / purchasing org /vendor
3) Purchasing output determination :document type
but it is not having option only for purchasing organisation through which we can send idoc for changes or creation of PO in that particular pur.org now if i choose 2) i have to give doc type and purchasing org both bcoz they are mandatory fields and value for vendor.
9) Also i have done the necessary ALE configuration (not covered in this document). In the partner profiles, use the message type u201CORDERSu201D and the IDOC type u201CORDERS05u201D.In the tab u201CMessage Controlu201D, used the process codes u201CME10u201D and u201CME11u201D for u201CPO Createu201D and u201CPO Changeu201D respectively.
but the idoc is not generated many times when po is changed and when once it is generated it is giving error
Please suggest solution.
Thanks in advance
nehavtIn me22n in messages tab after looking into processing log it is giving->No recipient found for message type ORDCHG in the
ALE model ,next time giving error as no idoc items belonging to purchasing document found,when i changed message type to ORDCHG the status is green in messages tab it is giving-> error occured while idoc xyz is sent and in WE02 status is red 02
error passing data to port(could not find code page for receiving system) -
Output Message Determination for Purchase Order
Hi all !
Can anybody please explain in brief, the procedure for Ouyput message determination for Purchase order. (including printer settings)
I have tried it throgh the Standard Configuration guide. but i am not able to do.
Please explain step by step including form attachment.
Thanks in Advance !!!!Hi,
Customization steps for Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
4. Message Determination Schemas
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
Note1
Now Check in SPAD (Printer settings) settings & try to check the printer configuration. Check Device attributes, Access methods etc. are maintained in Spool Administration (SPAD) for the selected printer (your local Printer, may be ur using HP01or any but in SAP std is LP01) but consult with your basis consultant regarding above.
Check the following also:
Spool generated using SP01 or SP02.
Output device.
Local printer settings.
Paper Tray, Print Mode, Printer
Note2:
Check MN04 and NACE t.codes
Regards,
Biju K -
Output Message for Purchase order not being created Automatically
Hi all,
I created a Condition type for Purchase order in MN04 with key combination "Doc.Type/Purch.Org/Vendor". The problem arises when i delete this condition record. After deletion when i create purchase order in me21n for that condition type, the system gives an error.
Message no. 06261 - No message generated for output of purchasing document.
Is there anyway the purchase order message is created automatically again when its condition type has been deleted from MN04.
- Regards
Sahar KhalidBefore creating the entry in MN04 the message was being created automatically. I want the system to create the same output message as it was creating before the creation of the entry in MN04.
-
Reg.Output type for purchase order
Dear Sir
I followed your steps but not come to "List of allowed output"
when I select the message for Purchase order(ME21N). There are listing NEU,SPO,MAHN and AUFB.
I just copy the NEU and all,I did not change anything.
Maintain Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
Ex:
EF---> TES
Select TES and double click on Mail title and texts and go to
EN- New Purchase Order Print Out,
Select TES again and double click on Processing routines,
Select TES again and double click on Partner Roles
4. Message Determination Schemas
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO(ME21N) and save it. Go to ME22N and print the PO by giving output type TES.
Please help me sir
RajjHi
Go to NACE
Select application as EF Purchase Order
Define TES as out put type there
Vishal... -
Different interfaces for purchase order output from MM system
Dear Guru's,
We are configuring the business scenarios of service procurement classic and Plan driven procurement with supplier enablement in the MM-SUS environment for our SRM7.01/ECC6 ehp 5 combination.
These two scenarios are using different interfaces for purchase order output.
The service procurement classic is using the proxy interface PurchaseOrderERPRequest_
Out_V1 for purchase order output from ERP.
However, the plan driven procurement uses the interface ORDERS.ORDERS02 for idoc message for purchase order output from ERP.
Why are there two different interfaces for the same document output in two different business scenario? How the system will determine which interface needs to be used in the runtime for the purchase order output?
Any thoughts will be highly appreciated.
Thanks and regards,
RanjanHi Ranjan,
Please add the value 'CL' in the table SWF_CATIDS
Then it will work.
With Regards,
Malay
Maybe you are looking for
-
How can I read the bootstrap files of any HDS Live stream and extract the fragment-URLs and fragment-numbers in plain text? Could it be that it is some kind of compressed format in the bootstrap? Can I uncompress it wirh f4fpackager.exe? Could not f
-
ITunes 9 will not burn a music CD that can play on a CD player
Ever since I upgraded to Itunes 9 I cannot copy (burn) a music CD that can be played on any CD player device other than the MacBook. I tried changing the format preference from .aif to .mpg4a but it still only creates CD's that cannot play. I am not
-
Preloader for flash presentations?
Hi all, I need (badly) to add a preloader to a flash presentation. But googling around I didn't found a solution to this. I can't believe that you can't do this in an easy way. I can't re-create the slide presentation from scratch using the flash tim
-
Multiple Slideshows on iPod Photo 60 GB
i have iPod Photo 60 GB. I typically create Keynote slideshow (for my studies) and export slideshow as Image Sequence and store it on iPod. Now as far as I know on Ipod you cannot have multiple Photo Librarires. I want to store multiple image librari
-
Error installing Flash Profession CC 2014
help me..flash download