Repeat event not working correctly

Yosemite 10.10.1 (14B25)
Calendar Version 8.0 (2026)
I've set up custom repeating events before. I work offshore on a fixed schedule, 6 weeks on 3 weeks off. I always start work on a Wednesday and finish on a Tuesday, I've set these up previously as its the easiest way to see if I'm home for a birthday or event of somesort.
However, my schedule has just moved after some time off and now when I set up a new event instead of a perfect 9 week cycle, calenar adds some extra days onto the end of repeating cycles, varying days, sometime 1, 2 or 3 extra.
So, I'm trying to set up my new schedule as follows;
New event - Work
Starts - Wednesday 11/02/15
Ends - Tuesday 24/03/15
Repeat - Custom, Every 9 weeks on Wednesday
End Repeat - After 12 times
Fairly straight forward, my schedule cycle is 9 weeks, so repeat ever 9 weeks on weds, the duration is exactly 6 weeks whilst at work, again fairly straight forward.
This is where I start getting problems,
1st repeat event starts on the correct day (15th April), but the end of the event is 2 days late on 28th June instead of 26th June.
2nd repeat event is the same, starts on the correct day but ends two days late.
3rd repeat event starts correct but ends 3 days late
4th repeat event starts correct but ends 3 days late
This continues, 3 late, 2 late, 1 late, 2 late etc
So I change it to repeat every 63 days, but still get the same error in the length of event?
Can anybody help or is it a flaw in the new version of calendar? I've tried using my iPhone to create the event in the same way but get the same results, extra days on the end?
Thanks

If you do not have the code for the button, and the button, present throughout your timeline travels, then you need to assign the code anytime you leave and return to whatever section(s) it is in. The code only executes in the frame it is in even though you might extend it along the timeline.

Similar Messages

Why is repeated events not populating correctly?

I am trying to set up a repeating event at icloud.com and it is not populating correctly. I set up a custom repeating event to repeat every two weeks on certain days and it shows up every week regardless that I selected repeat every "2" weeks"

If known-good battery,
& known-good adapter;
check Mag-safe Board.
http://www.ifixit.com/Device/Mac_Laptop
http://www.ifixit.com/Device/Apple_AC_Adapter
Good luck & happy computing!

System Events not working correctly with Acrobat Professional

Hey Guys, I have a script that I have written that automatically enables security settings on a PDF through Acrobat Professional. Because of Acrobats poor scriptability I am forced into doing much though System Events.
This is not a major problem... however when activating some settings in the security settings, often warning Alert dialog boxes appear when you tell System Events to enable particular settings. These Alerts do not have a title... The only way I have been able to get the script to deal with them is with the following code:
if title of front window is "" then
    tell front window
        click button "OK"
    end tell
end if
I guess this is an ok solution... bit hard to identify windows when they don't have titles...
BUT this is not my main problem. The main problem is that the script gets to one of these alert dialog boxes and just sits there... It sits there for like 10 seconds and then it performs the "click button "OK"" command.
This is a problem as there are like 3 of these instances and it really adds up. Can anybody help me... I am using Acrobat Professional 8.2.0 and the entire code is:
tell application "System Events"
    try
        tell process "Acrobat"
            -- Enable security settings
            click menu item "Properties..." of menu "File" of menu bar item "File" of menu bar 1
            tell window "Document Properties"
                tell tab group 1
                    click radio button "Security"
                    tell group "Document Security"
                        click pop up button 1
                        click menu item 2 of menu 1 of pop up button 1
                    end tell
                end tell
            end tell
            tell window "Password Security - Settings"
                click pop up button 1
                click menu item 4 of menu 1 of pop up button 1
                tell group "Permissions"
                    click checkbox "Restrict editing and printing of the document. A password will be required in order to change these permission settings."
                    click text field 1
                    keystroke pdfPassword
                    click pop up button 1
                    click menu item 2 of menu 1 of pop up button 1
                    click pop up button 2
                    click menu item 4 of menu 1 of pop up button 2
                end tell
                click button "OK"
            end tell
            if title of front window is "" then
                tell front window
                    click checkbox 1
                    click button "OK"
                end tell
            end if
            tell window "Adobe Acrobat - Confirm Permissions Password"
                click text field 1
                keystroke pdfPassword
                click button "OK"
            end tell
            if title of front window is "" then
                tell front window
                    click checkbox 1
                    click button "OK"
                end tell
            end if
            tell window "Document Properties"
                click button "OK"
            end tell
end tell
    on error
        display alert "System Events was unable to Enable Commenting. This may be because Acrobat has modified its menu system. Please contact your system administrator."
    end try
end tell
A delay does not work... its like as soon as I click the "OK" button it stalls for 10 seconds or does not know that is meant to continue... because I did this:
tell window "Password Security - Settings"
    click button "OK"
end tell
beep
In this situation it still takes like 10 seconds for the beep to occur after the click button "OK" command.

Hey Guys, I have a script that I have written that automatically enables security settings on a PDF through Acrobat Professional. Because of Acrobats poor scriptability I am forced into doing much though System Events.
This is not a major problem... however when activating some settings in the security settings, often warning Alert dialog boxes appear when you tell System Events to enable particular settings. These Alerts do not have a title... The only way I have been able to get the script to deal with them is with the following code:
if title of front window is "" then
    tell front window
        click button "OK"
    end tell
end if
I guess this is an ok solution... bit hard to identify windows when they don't have titles...
BUT this is not my main problem. The main problem is that the script gets to one of these alert dialog boxes and just sits there... It sits there for like 10 seconds and then it performs the "click button "OK"" command.
This is a problem as there are like 3 of these instances and it really adds up. Can anybody help me... I am using Acrobat Professional 8.2.0 and the entire code is:
tell application "System Events"
    try
        tell process "Acrobat"
            -- Enable security settings
            click menu item "Properties..." of menu "File" of menu bar item "File" of menu bar 1
            tell window "Document Properties"
                tell tab group 1
                    click radio button "Security"
                    tell group "Document Security"
                        click pop up button 1
                        click menu item 2 of menu 1 of pop up button 1
                    end tell
                end tell
            end tell
            tell window "Password Security - Settings"
                click pop up button 1
                click menu item 4 of menu 1 of pop up button 1
                tell group "Permissions"
                    click checkbox "Restrict editing and printing of the document. A password will be required in order to change these permission settings."
                    click text field 1
                    keystroke pdfPassword
                    click pop up button 1
                    click menu item 2 of menu 1 of pop up button 1
                    click pop up button 2
                    click menu item 4 of menu 1 of pop up button 2
                end tell
                click button "OK"
            end tell
            if title of front window is "" then
                tell front window
                    click checkbox 1
                    click button "OK"
                end tell
            end if
            tell window "Adobe Acrobat - Confirm Permissions Password"
                click text field 1
                keystroke pdfPassword
                click button "OK"
            end tell
            if title of front window is "" then
                tell front window
                    click checkbox 1
                    click button "OK"
                end tell
            end if
            tell window "Document Properties"
                click button "OK"
            end tell
end tell
    on error
        display alert "System Events was unable to Enable Commenting. This may be because Acrobat has modified its menu system. Please contact your system administrator."
    end try
end tell
A delay does not work... its like as soon as I click the "OK" button it stalls for 10 seconds or does not know that is meant to continue... because I did this:
tell window "Password Security - Settings"
    click button "OK"
end tell
beep
In this situation it still takes like 10 seconds for the beep to occur after the click button "OK" command.

Button event not working correctly

I'm creating a project with a number of different sections. I've created a index menu with invisible buttons on that takes you to the different sections. This works fine. In each section I wonted a means to get back to this index, so created a index button that is present throughout each section. I've put the event handler in the actions layer on the same frame that the button instance is on (frame 15).
idex_bt.addEventListener(MouseEvent.CLICK, indexBack);
function indexBack(e:MouseEvent):void{
gotoAndStop(10);
The problem is that the button only works at this point if you move to any other section it does not. I can see no reason for this. The invisible buttons that jump you to each section work an all the frames they are present on, but the index button does not.
I feel like I'm missing something very simple, any ideas?

If you do not have the code for the button, and the button, present throughout your timeline travels, then you need to assign the code anytime you leave and return to whatever section(s) it is in. The code only executes in the frame it is in even though you might extend it along the timeline.

The calendar sync is recently not working correctly, not display "All events" but it only displays the last six months for my individual entries. My repeating entires do go back further, though. How do I fix?

I have an iPad 5.1.1. The calendar sync has started to not work correctly. I have it checked "All events," but it only displays the last two months for my individual entries. My repeating entires do go back further, though. How do I fix?

HI Jason269. Thanks for your reply, however I wrote that I already have "All events" checked. If All Events is checked and it doesn't diaplay all events, how do I fix? It seems this is a common issue, as I have read many others on here state the same problem.
I believe my problem occurred when I synced my iMac calendar to my iPad calendar using yahoo. Yesterday, I unsynced them on my iMac controls. When I checked my iPad calendar, all of my old entries reappeared - but only for five seconds and disappeared again. So, the data is saved and still there but cannot be displayed, even when I have All events checked. In fact, it only shows my individual entries for the last two months, but does show all my recurring entries. If I switched to last six months, I will see everything for the last six months. If I switch back to all events, it is only for the last two months.
As I mentioned, others on here have expressed exactly the same issue, including the two month example and having used yahoo.
For legal purposes, I need to be able to use the information from my indidual calendar entries in an upcoming court case. So I really need to fix this ASAP!

I am using a Application in c dll calling from jni jar by java applet in firefox version 19.0 , the problem is click event message box will not working correct

I am using a Application in c dll calling from jni jar by java applet in firefox version 19.0 , the problem is button click event message box or popup window will not working correctly. Please any one suggest me the steps to overcome this not responding or slowness in the responding problem of Button click event.

Hello,
In Firefox 23, as part of an effort to simplify the Firefox options set and protect users from unintentially damaging their Firefox, the option to disable JavaScript was removed from the Firefox Options window.
However, the option to disable JavaScript was not removed from Firefox entirely. You can still access it from about:config or by installing an add-on.
'''about:config'''
# In the address bar, type "about:config" (with no quotes), and press Enter.
# Click "I'll be careful, I promise"
# In the search bar, search for "javascript.enabled" (with no quotes).
# Right click the result named "javascript.enabled" and click "Toggle". JavaScript is now disabled.
To Re-enable JavaScript, repeat these steps.
'''Add-ons'''
You can alternatively install an add-on that lets you disable JavaScript, such as
*[https://addons.mozilla.org/firefox/addon/noscript/ No-Script] (to disable JavaScript on a per page basis, as required)
*[https://addons.mozilla.org/firefox/addon/quickjava/ QuickJava] (to easily disable and enable JavaScript, automatic loading of images, and other content)
Thank you and I hope this helps!

Outlook 2007 and iPhone Calendar All-Day events not displaying correctly

I recently took the 3.1.3 update for my iphone and have since noticed that syncing all-day events from my Outlook 2007 exchange environment to the iphone is not working correctly. The all-day flag on the iphone is not being checked, thus the event shows up all over the calendar instead of just a single item at the top of the calendar. This only happens for multi-day events. Single-day, all day events show fine. Here's the tests I did:
1. Created a single day, all-day event for tomorrow June 18 in Outlook 2007. Made sure that they all-day checkbox was checked in Outlook. Waited for the sync and it shows up fine in iPhone calendar. There is a single line at the top of the "Day" view that lists the event. When you look at the event, the all-day checkbox is checked in iphone calendar.
2. Next I updated the event in Outlook to make it a multi-day, all day event. I changed the end date to be June 19. I made sure to leave the all day checkbox checked in Outlook. Once synced, the all day checkbox on the iphone is now unchecked and as a result the event takes up the whole "Day" view for both days.
Is there a solution for this? Only seen this since I updated to the 3.1.3 firmware. All events show up the right way in Outlook. It is only the iPhone calendar that shows them wrong. Thanks in advance for any help.

Same problem here.
All Day events entered in Outlook 2007 on my work machine that have ALL DAY checked and are only on that ONE Day, seem to come out fine. If however we have an all-day event that goes multiple days, then it enters it on my iphone taking up 00:00-00:00, which is very messy if you have two ALL-day envents on the same day (when tracking different personnel for example).
I have noticed the real annoying item though is that changing it on my iPhone 4 directly, that once I put in the right start and end dates, and choose ALL DAY, about 5 seconds later it actually changes the START DAY! This makes you go back to change the start day, then it changes the end day so you change that, and now finally all sorted.
This NEVER happened on my iPhone3G that I have used with Excahgne for over two years now. Only since I got my iPhone4.
PLEASE Apple, fix this!!!!

Mouse scroll wheel not working correctly.

Just installed Firefox 4 and my mouse scroll wheel is not working correctly. When opening the program, I can scroll as normal for about 5/10 minutes. Then, suddenly, the mouse scroll wheel no longer works. I've since found that it is actually scrolling outside of Firefox. E.g. I had Outlook open and it was scrolling through my Outlook even though Firefox was the open window. I checked this multiple times and it always seems to be the case.
Checked about:config as advised, everything looks correct on the mousewheel settings (i.e everything is set to default). Mouse drivers are up to date. No problems with any other programs. This issue started occurring in Firefox 4 beta. I switched back to 3.6 so I could continue scrolling. Updating to Firefox 4 caused the issue to recur.

It seems a lot of people are having problems with the Mighty Mouse's scroll ball. I actually thought I was done for after just a few weeks of using my first (wired) one. But here I am years later with my wireless variant, beeing perfectly happy with it (in case you don't know, the wireless Mighty Mouse is a much better option due to it's laser based tracking system). In my experience, getting rid of fluff that interferes with the ball is quite easy on both types. Try blowing really hard directly at the trackball (optionally while you press it down with some pointed device) a few times. Rotate it and repeat as needed. Alternatively roll the mouse upside down on the microfiber cloth that probably came with your Mac.

Sorting not working correctly for date field in alv report

Hi All,
My report displays many rows also containing date type fields of bldat,budat .
When I sort the report selecting field of type bldat budat the sorting is not correct for the year.
Ex:
Invoice doc dat
01-25-2011
01-21-2011
02-02-2011
10-25-2010
11-20-2010
If I use ascending then it is sorted as :
Invoice doc dat
01-21-2011
01-25-2011
02-02-2011
10-20-2010
10-25-2010
Why the sorting is not working correct for year.(2010 records should have been first).
The field wa_tab-bldat is of type char10.
It is populated as wa_tab-bldat = bsak-bldat.
Kindly suggest what can be done.

The field wa_tab-bldat is of type char10
Then what it does is correct.
Refer to type datum...it will work

If statement within a view is not working correctly ?

Hi all,
maybe i am wrong but i think the if statement within a view is not working correctly. See code down below.
I would like to use the Hallo World depending on the page attribute isFrame with or without all the neccessary html tags. Therefore i have embedded the htmlb tags in an if statement. But for any reason if isframe is initial it isn't working. It would be great if anybody could help me.
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if not isframe is initial. %>
<htmlb:content design="design2003">
     <htmlb:page title = "Top Level Navigation view">
<% endif. %>
hallo world
<% if not isframe is initial. %>
     </htmlb:page>
</htmlb:content>
<% endif. %>
thanks in advance and best regards
Matthias Hlubek

Matthias,
The short answer: your example is <b>NOT</b> going to work. The long answer will probably 5 pages to describe. So first let me rewrite the example so that it could work, and then give a short version of the long answer. Do not be disappointed if it is not totally clear. It is rather complicated. (See the nice form of IF statements that are possible since 620.)
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if isframe is <b>NOT</b> initial. %>
<htmlb:content design="design2003">
<htmlb:page title = "Top Level Navigation view">
    hallo world
</htmlb:page>
</htmlb:content>
<% else. %>
hallo world
<% endif. %>
So why does your example not work? Let us start with a simple tag:
<htmlb:page title = "Top Level Navigation view">
</htmlb:page>
Now, for each tag, we have effectively the opening part (<htmlb:page>), an optional body, and then the closing part (</htmlb:page>). We are now at the level of the BSP runtime processing one tag. What the runtime does not know, is whether the tag wants to process its body or not. Each tag can decide dynamically at runtime whether the body should be processed. So the BSP compiler generates the following code:
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
ENDIF.
tag->DO_AT_END( ).
You should actually just debug your BSP code at ABAP level, and then you will immediately see all of this. Now, let us mix in your example with our code generation. First you simplified example:
<% if isframe is NOT initial. %>
<htmlb:page title = "Top Level Navigation view">
<% endif. %>
<% if isframe is NOT initial. %>
</htmlb:page>
<% endif. %>
And then with our generated code. Look specifically at how the IF/ENDIF blocks suddenly match!
if isframe is NOT initial.
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
endif.
if isframe is NOT initial.
ENDIF.
tag->DO_AT_END( ).
endif.
You can see that your ENDIF statements are closing IF blocks generated by the BSP compiler. Such a nesting will not work. This is a very short form of the problem, there are a number of variations, and different types of the same problem.
The only way to solve this problem, is probably to put the body into a page fragment and include it like I did above with the duplicate HelloWorld strings. But this duplicates source code. Better is to put body onto a view, that can be processed as required.
brian

** Filtering is not working correctly in ALV (REUSE_ALV_GRID_DISPLAY)

Hi Friends,
We have one Z report that output is displayed in ALV. We are using the standard FM 'REUSE_ALV_GRID_DISPLAY.
We have requirement to remove leading zeros for the field like Material Number (MATNR), Equipment Number (EQUNR) etc. We did the changes by applying the field catalog properties as below.
lw_fieldcat-lzero = space.
lw_fieldcat-no_zero = 'X'.
After this, the MATNR and EQUNR is displayed correctly in the ALV. (Leading zeros are suppressed). But, when we do filter for these fields, in the filter window it displays all the values with leading zeros.
1. We don't understand why it is showing in the Filter widow with all leading zeros. All it shows all the records instead of unique items.
Later on, we removed the above fieldcat coding. Then, we have called the CONVERSION_EXIT routines (in the domain) for the fields to remove leading zeros.
Now, the MATNR and EQUNR is displayed correctly (without leading zeros) in ALV. When we do filter, it is also doing filtering correctly. But, when we do filter which have EQUNR having long values (after zero suppression), it is not working correctly. i.e no items are displayed in the ALV.
Not only for this items. If we filter character columns which have long text, it is not filtering correctly.
2. It is not able to understand why the filtering is not working for long items. But in the standard report, the filtering is working correctly.
We are using SAP ECC 6.0.
Friends, can you clarify the about doubts. It is surprising for me.
Kind regards,
Jegathees P.
Our customer is asked to remove the leading zeros for the numeric field

Hi Clemens Li
I agreed on your point. When we define the Internal table the type for element EQUNR & QUMNR , we are referring the SAP data element for EQUNR, QMNUM field.
Our doubt is even though we refer the standard data element, in the ALV display, it shows with leading zeros and also it creates problems in the filtering and in the filter window all values instead of unique nos.
Hi Abhii
I have given below the fieldcat coding.
Friends, can you kindly clarify the above said problems. Since we use SAP ECC 6.0 any notes or patches apply is required. ( this is the basic functionality in ALV, that is my doubt).
    wls_fieldcat-col_pos   = wpv_pos.
    wls_fieldcat-fieldname = wpv_champ.
    wls_fieldcat-tabname   = wlc_tabname.
wls_fieldcat-seltext_s = wls_fieldcat-seltext_m
    wls_fieldcat-seltext_l = wpv_libelle.
    wls_fieldcat-ddictxt   = 'L'.
    wls_fieldcat-no_out    = wv_no_out.
    APPEND wls_fieldcat TO gt_fieldcat.
Kind regards,
Jegathees P.

Key Figure calculation in Abap is not working correctly - Overlooping

Hi,
I wrote a logic to calculate the ratio of key figure but it is not working correctly
For example I have a requirement to split 1 Product into Several new Products and also the Net Amount will be splitted to these several new products as well. The total Amount of the new product will be equivalent to the Net Amount.
So far my Logic is splitting the product to several new products but the amount is incorrect as the calculation is over looping.
Sample
A PRODUCT has Net Amount 1000. And this product needs to be splitted into 3 new products. Each of this new product is assigned a ratio of 0.3, 0.2 and 0.7 respectively. total sum of the ratio is 1.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 = 200
PRODUCT3 0.7 = 1000 * 0.7 = 700
The total amount of this new products is 1000.
Now my logic is working this way.
PRODUCT1 0.3 = 1000 * 0.3 = 300
PRODUCT2 0.2 = 1000 * 0.2 * 0.3 = 60
PRODUCT3 0.7 = 1000 * 0.2 * 0.3 * 0.7 = 42
Only the PRODUCT1 is working correctly and there is overlooping for the remaining products
Logic used
DATA: t_data TYPE data_package_structure OCCURS 0 WITH HEADER LINE.
DATA: t_newdso LIKE /bic/newdso OCCURS 0 WITH HEADER LINE.
DATA: t_olddso LIKE /bic/olddso OCCURS 0 WITH HEADER LINE.
DATA: amount LIKE data_package-netamount.
DATA: zidx LIKE sy-tabix.
REFRESH t_data.
LOOP AT data_package.
zidx = sy-tabix.
MOVE-CORRESPONDING data_package TO t_data.
REFRESH t_newdso.
SELECT * FROM newdso INTO TABLE t_newdso WHERE prod =
data_package-prod.
SORT t_newdso BY prod.
*LOOP AT T_NEWDSO.
READ TABLE t_newdso WITH KEY prodh4 = t_data-prod.
IF sy-subrc EQ 0.
    LOOP AT t_newdso.
      t_data-prod = t_newdso-/bic/znew_mp.
      t_data-material = t_newdso-material.
*T_DATA-NETAMOUNT = T_DATA NETAMOUNT * T_NEWDSO-/BIC/ZSP_RATIO.*
      APPEND t_data.
    ENDLOOP.
ELSE.
    REFRESH t_olddso.
    SELECT * FROM olddso INTO TABLE t_olddso WHERE prod =
    data_package-prod.
    SORT t_olddso BY prod.
    READ TABLE t_olddso WITH KEY prodh4 = t_data-prod.
    t_data-prod = t_olddso-prod.
    t_data-material = t_olddso-material.
    APPEND t_data.
ENDIF.
MODIFY data_package INDEX zidx.
ENDLOOP.
REFRESH data_package.
data_package[] = t_data[].
thanks
Edited by: Matt on Sep 27, 2010 2:25 PM - added tags

Hi,
I am not really good at debugging Abap code since I am a newbie. however I have tried to add CLEAR T_DATA before the first loop.
REFRESH T_DATA.
LOOP AT DATA_PACKAGE.
ZIDX = SY-TABIX.
MOVE-CORRESPONDING DATA_PACKAGE TO T_DATA.
and before the second loop and select statement and at the end of the loop.
REFRESH T_NEWDSO.
SELECT * FROM NEWDSO INTO table T_NEWDSO WHERE PROD =
DATA_PACKAGE-PROD.
SORT T_NEWDSO BY PROD.
READ TABLE T_NEWDSO WITH KEY PROD = T_DATA-PROD.
IF sy-subrc EQ 0.
LOOP AT T_NEWDSO.
but then not all data are being fetched.
thanks
Edited by: Bhat Vaidya on Sep 28, 2010 8:33 AM

Email pushing not working correctly for office email - 3 seperate devices/carriers

We switched email hosts several months ago and since our email pushing has not worked correctly. Our host/IT guy has been very unwilling to help me through this (I get the pleasure of being the in-house IT source)
I personally am on AT&T have no problems with the other 3 emails I have set up on my blackberry. However I receive my work account one time a day at roughly 6:15. Another user is on Alltel and he receives spotty emails throughout the day, but his gmail account comes through instantly. The third user is on nextel and he receives his 2-3 times per day.
I began to think this was an email host issue since the three of us are all on different carriers, until I found out a fourth user, also on nextel, receives his emails fine.
Users 1-3 are on Outlook 07 on various versions of the Curve. We have all our messages to stay on the server.
User 4 is on the older nextel blackberry push to talk, and is not on outlook.
We do not have an exchange server. Our emails were all set up through our devices.
Any suggestions? The answers I have received through our carriers is to make sure that our messages are set to be left on the server. Everyone else at the office has given up - but for me this is the quest for the Holy Grail.......I'm determined find the answer!
Thank you in advance for any suggestions.
Caitlin Talbot

Potential solution for windows for a side-by-side install. This works for me.
To setup a firefox install side by side so that links from external programs (like email) can open (so you don't get a "Firefox is already running but is not responding" message) do the following.
The solution entails the use of the -no-remote switch. Don't use it for the default browser. Use it for the non default browser.
I'll use firefox 3.6 and firefox 4.0 as examples but this should work for future versions.
+ Install firefox 3.6 and Firefox 4.0 in different directories. Eg.
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Program Files\Mozilla Firefox 4\firefox.exe
+ Open profile manager. Start > Run : firefox.exe -ProfileManager
+ In profile manager create Two Profiles.
firefox3.6
firefox4
+ In profile manager select firefox 4 as your default (assuming you want to default to the latest) and tick "Don't ask at startup"
+ Create two windows shortcuts.
* General: Mozilla Firefox 4 (default). Shortcut > Target: "C:\Program Files\Mozilla Firefox 4\firefox.exe". Shortcut > Start In: "C:\Program Files\Mozilla Firefox 4"
* General: Mozilla Firefox 3.6. Shortcut > Target: "C:\Program Files\Mozilla Firefox\firefox.exe" -p firefox3.6 -no-remote. Shortcut > Start In: "C:\Program Files\Mozilla Firefox"
That's it. Links from external programs should now open in your default browser.
Further details see. [http://kb.mozillazine.org/Opening_a_new_instance_of_your_Mozilla_application_with_another_profile Opening a new instance of your Mozilla application with another profile]

I bought an IPAD air from state and the screen is not working correctly and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

i bought an IPAD air (32 gb wifi only) from USA just one month ago and the screen is not working correctly(picture attached) and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

Have you tried a soft-reset to see if that fixes it ? You might be able to get warranty service in Egypt for your iPad, but the warranty includes :
IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
As it's wifi-only you should have a better chance of it being serviced under warranty, but there are no guarantees, it might depend upon the repairer.
Egypt authorised service providers : https://locate.apple.com/eg/en/

SSRS 2008 R2/SSRS 2012 Tab Delimited setup is not working correctly in Report Designer

I have changed a RSReportDesigner.config to add a tab delimited option for report export, but it is not working correctly in vs2008/vs2010 report designer. I get a duplicate of CSV (comma delimited) in the export dropdown list.
I have tested SSRS 2008 R2/SSRS 2012 on Windows 7 64 bit professional.
It is working correctly in the report manager.
<Extension Name="TAB" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
       <OverrideNames>
           <Name Language="en-US">TAB delimited</Name>
       </OverrideNames>
       <Configuration>
           <DeviceInfo>
               <FieldDelimiter xml:space="preserve">	</FieldDelimiter>
               <Encoding>ASCII</Encoding>
               <UseFormattedValues>False</UseFormattedValues>
               <NoHeader>False</NoHeader>
               <FileExtension>TXT</FileExtension>
           </DeviceInfo>
       </Configuration>
      </Extension>

Hi Dave0323,
According to your description, you want to export your report into TXT file and change the delimiter to be a Tab. Right?
In Reporting Services, when exporting to a CSV file, we can change the default field delimiter to any character that we want, including TAB, by changing the device information settings in the configuration file. For example, to use TAB,
update the FieldDelimiter setting to <FieldDelimiter xml:space="preserve">[TAB]</FieldDelimiter>. And we can change the FileExtension to be TXT if we want to export it into a TXT file. So in this scenario, we just need to modify the configuration
file like below:
The result looks like below:
Reference:
CSV Device Information Settings
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Repeat event not working correctly

Similar Messages

Maybe you are looking for