Repeat group header in multiple columns

I have a group and the details section is set to format with multiple columns. I have the repeat group header on each page option checked but I also want it to repeat group header if the group spans multiple columns. Does anyone know how to do this?

Thanks for your reply but I'm not sure how you copy a group header into another column if the data that is displayed there is dynamically displayed. Please advise. Thanks

Similar Messages

Repeat Group Header on Every Column

Hello all. I have a simple two column layout report with three groups. I would like the group headers to repeat at the top of each column similar to the way they repeat on each page when the "Repeat Group Header On Each Page" check box is clicked. Any suggestions?

Zilla Eh, thank you for your help. The column headers are indeed in the group headers, however they do not repeat on each column. For clarification, I've posted a sample page of the report on our website: http://lehivalley.com/catalog09example.pdf. There are three groups on the report. Candy represents Group1, Chocolate represents Group2, and the Product Name (ex. Chocolate Banana Chips) represents Group3. Referencing the example, on the top of the second column I'd like to see Candy (group1), Chocolate (group2), and Chocolate Covered Cookie Dough (group3), repeated prior to the rest of the details being listed.
Let me know if you have any ideas. By the way, I'm using Crystal Reports XI if that matters. Thanks

Repeat group header on every page before group footer as group spans across

I have a group which spans across multiple pages.In group there are two subreports in Group footer.I have set all the required parameters to repeat group header on every page in group expert,but not getting desired results,please help....

I have following structure in my report.
I have two group headers at the top,first one contains name of the site & site number,second header contains Site-Admin as heading,below which i have kept details section of report which displays name of administrator which repeats details section in case there are more than one adminstrators.
Below this i have two group footers which individually contain each of the two sub-reports.
As per data,these individual subreport may or may not begin at the beginning of the new page every
time,therefore fake group header put at the beginning of these sub-reports may come in middle of the page sometime,so thet cant be done.
Thank you,please reply if you have another solution....

Blank Page with repeated group header getting displayed

Hello All,
One more help i need,
Am having a formula field in the group header for the same reprot which i have posted earlier and am displaying some text based on the condition and the option repeat group header is checked for each page.
the issue here i am having is while exporting the report to .txt (flat file)
the formula field is displaying same static data (i.e. the formula field is not evaluating while exporting to .txt)
could you please help in resolving this.
Thanks
Ranjeet

Hi Ranjeet,
Can you attach that report with sample data to this thread?
--Naga

Repeating Group header on each page

Hello Everybody,
I have two groups in my report. For my first group value, i have given report - group expert - options and checked "Repeat group header on each page" assuming that my first group values will appear on each page. But it is not doing so. In one of the page the group footer values are appearing without my first group values.
I belive my problem is my second group values are ending in one page and first group values are extended to next page . Can any one please hep me.

if that is the case Narukonda 1, there are several sap notes dealing with this issue...please see this sap note [here |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313333333133373339%7D.do]which deals with both orphaned group footers and group headers.

How to repeat group head on each page

I have problem with repeat group heaf on each page, I've ticked the option 'Repeat group head on each page' from the Change Group Option. But the group head didn't appear on each page when I previewed the report. Does anyone have a solution/explaination to this?
Cheeers

Sorry Gents, I did't make my porblem clear.
To James Terry
Yes, My reports contain one or more sub-groups (only group 1's group header needs to be repeat on each page).
To Graham Cunningham
I found pages , containing only group 1's group footer summarized info, don't display group 1's group header. Just like what you said ' It will only repeat on pages that display group information'. Is this a bug or sort of default rule? What else can I do if I want the group header to repeat on each page no matter whether there is group info or not, besides moving the info from group header to pager header?
Thanks a lot.
Regards
Joseph

Repeat Group Header On Each Page not working

Hi,
I have a report that have 3 subreport, and in the Subreport, there is Group Headers that enabled the option "Repeat Group Header On Each Page". It works fine in the CR10 preview. However, the header won't repeat in the PDF generated by JRC.
Any Idea?
Thanks a lot!!

Hi,
Doesthe JRC engine uses CR10 jars or XI\R2 jars? Can you possibly try it with latest set of Eclipse jars? You can download it from Diamond.
Thanks
Aasavari

Repeat Group Header on Each Page in Subreport won't reflect when generate by JRC

Hi All,
I have a report that contain several Subreports. Inside the Subreport, there are Group Header section. I have checked the option of "Repeat Group Header on Each Page". It works fine when I preview in Crystal Report. But when I using JRC to generate the report result. The group header only display on the first page of the group details.
More, Crystal 10 Common Monthly Hot Fix (English) already installed.
Any idea?
Thanks a lot for your help!
Donald

Hi,
Doesthe JRC engine uses CR10 jars or XI\R2 jars? Can you possibly try it with latest set of Eclipse jars? You can download it from Diamond.
Thanks
Aasavari

GROUP BY with multiple columns.

I have little query about GROUP BY clause.
Sometimes we will give multiple column names in GROUP BY .If it behaves in the same way as ORDER BY (multiple columns) i would love to have an example where I can use GROUP BY multiple columns. Anyways howsoever it behaves it will be really appreciated if anyone can explain a scenario where GROUP BY with multiple columns can be used.
I know about the usage of aggregate functions with GROUP BY but using only one column.
Thanks..!!!

Hi,
Group by is used for grouping of same records. check this bellow scenario
SELECT registrationid, dateofbirth, age FROM prawin62 WHERE registrationid = 22;
22     1/23/1975     54
22     5/18/2011     66
22     5/18/2011     66
22     5/18/2011     66
22     5/18/2011     66
22     5/18/2011     66SELECT registrationid, sum(age) FROM prawin62 WHERE registrationid = 22 GROUP BY registrationid;
22     384SELECT registrationid, dateofbirth, sum(age) FROM prawin62 WHERE registrationid = 22 GROUP BY registrationid, dateofbirth ;
22     5/18/2011     330
22     1/23/1975     54Thanks,
Praveen

Single heading for Multiple columns in ALV

Hi Experts,
      I need to display a common column heading for multiple columns in my ALV Grid Display output. I am giving the sample output here.
MATNR...WERKS..| Unrestricted Stock|....|Stock in transfer        |....|Stock in Quality|.
............................| CAT | SAP | Differe| .. | CAT   | SAP | Diff   | .. | CAT   | SAP | Diff |
As I shown above, for 3 columns CAT, SAP, and for Difference, I need to get "Unrestricted Stock" as column heading... and so on...
Pl. suggest me on this.
Thanks in Advance
Ramakrishna

Hello Ramki,
NOT POSSIBLE IN ALV AT ALL :-((
You have to use classical report using WRITE stmts for this.
If your client does not want to lose ALV functionalities, then you can try something like.
Unrestricted Stock-SAP | Unrestricted Stock-CRM | Unrestricted Stock-Diff. Stock ... and so on !!!
BR,
Suhas
Edited by: Suhas Saha on Jan 21, 2009 3:00 PM

Repeat Group Header On Each Page with Underlay Following Sections

How to overcome the following problem?
1. I am using Crystal report 13.0.5.891
2. I have designed the report with Group Header as [Underlay following section]
3. I have checked the group to repeat on each page
4. Number of lines in the group header may vary
5. Number of lines in details may also vary
My objective is to print the separator line placed in group footer, after the
header lines or after the detail lines which one is taking the maximum lines.
This is not happening, and I am getting the following output, which is not meeting my requirement
Where the "LINE IN GROUP FOOTER" should appear after "Group 1 Header Line 6" in the second page
as the report ends there, but in the output, the line is coming just after the end of detail record.
like following
As a result of this, the next record of the group is overlapping with the first record and creating a mesh
------------------------------------------------------------------------------------------------------------------------------------ PAGE 1 OF 2
Column Heading 1                       Column Heading 2                      Column Heading 3
Group 1 Header Line 1                 Detail Record 1 Line 1
Group 1 Header Line 2                 Detail Record 1 Line 2
Group 1 Header Line 3                 ----------------------------------------------------------------------------------
Group 1 Header Line 4                 Detail Record 2 Line 1
Group 1 Header Line 5                 Detail Record 2 Line 2
Group 1 Header Line 6                 Detail Record 2 Line 3
                                                  Detail Record 2 Line 4
                                                  Detail Record 2 Line 5
======================LINE IN GROUP FOOTER========================
PAGE BREAK
------------------------------------------------------------------------------------------------------------------------------------ PAGE 2 OF 2
Column Heading 1                       Column Heading 2                      Column Heading 3
Group 1 Header Line 1                    Detail Record 3 Line 1
Group 1 Header Line 2                    Detail Record 3 Line 2
Group 1 Header Line 3                    Detail Record 3 Line 3
Group 1 Header Line 4                    Detail Record 3 Line 4
======================LINE IN GROUP FOOTER========================
Group 1 Header Line 5
Group 1 Header Line 6
Thanks in advance.

Thanks for you response.
I have updated the crystal report to 13.0.13.1597.
Still I am getting the same issue. I am generating the report in PortableDocFormat and exporting the byte array to download from the web browser. The application is developed in ASP.NET 2012 .net version 4.5.
I am also uploading 2 images of the final pdf that I am getting, for your opinion.
The report appeared in the first image is ok, where the first group has 2 child records and the second group has 1 child, but whenever I am changing the mapping in the database, where the first group has 1 child and second group has 2 child, my report is not working. as it is clear from the second image
Also after installing the new version of CR, my existing codes are not working, and giving the following exception in the line where ExportToStream is written.
Unable to cast object of type 'FileStreamDeleteOnClose' to type 'System.IO.MemoryStream'.
I have modified the existing code to overcome this exception.

Count(*) , group by with multiple columns from multiple tables involved

Hi all,
I am relatively new to SQL.
Currently I have these few requirements, to display quite a number of fields from 3 tables for display of report.
In my query I need to:
1.) count(*)
2.) select quite a number of fields from table 1,2,3
However when count(*) is used, grouped by has to be used to.
How do I actually use group by with so many columns to be selected?
I have actually used the query below, but the count(*) returns 1, the correct output should be 3 instead.
select count(*), table1.col1, table1.col2, table1.col3, table2.col3, table2.col4, table2.col6, table3.col1, table3.col4, table3.col5
from table1, table2, table3
where
<conditions>........................
group by table1.col1, table1.col2, table1.col3, table2.col3, table2.col4, table2.col6, table3.col1, table3.col4, table3.col5
I know this group by statement looks very unrefined. How can I select multiple fields from different tables, and yet get the count(*) correctly?
Thank you so much for your time.

Hmm yes it actually does return count as 1 for each row. But there are 3 rows returned. E.g.
ctr table1.col1 table1.col2 ..........
1 value1 value1
1 value2 value3
1 value3 value4
If I put the count(*) outside, it returns 3 , the correct output
ctr
3
select count(*) from
select table1.col1, table1.col2, table1.col3, table2.col3, table2.col4, table2.col6, table3.col1, table3.col4, table3.col5
from table1, table2, table3
where
<conditions>
group by table1.col1, table1.col2, table1.col3, table2.col3, table2.col4, table2.col6, table3.col1, table3.col4, table3.col5
Thus I was wondering if it was the group by of multiple colns that resulted in the count stucked at value 1.

Repeating group header in each page if it breaks

Hi All,
I am using a simple rtf file to create a report. The group header does not repeat after page break. Is there a simple way to make it repeat the report goes to next page? I am using subtemplate too on page header.
Thanks,
Sushil

sorry posting in bi publisher forum!!

Why does my group header keep repeating?

Hi,
I can't figure this out. My group header appears on the first page as it should. It doesn't appear on the second page. Then it appears on the third page and all subsequent pages for that group.
In my example group #1 is the invoiceID. For each invoiceID, there would be some header information that should display on the first page of that invoice. Then come the details.
For some reason, the invoice header information keeps reappearing on every page of that invoice as the details continue along the bottom.
I have no formulas set up for my group header. The group itself is the same. There is enough room for the group header on the first page, and it doesn't seem to matter what boxes I check and uncheck; I get the same result. Any ideas on what might have been done to cause this?
Thanks
Edited by: plynch on Feb 21, 2012 5:04 PM

Hi,
So, the Group Header (for the same group) appears on every page except for the 2nd page. Which means you've got the 'Repeat Group Header' on each page' option ON under Group Options.
Why it doesn't come on the 2nd page? Could you check if you've got a conditional suppression formula on the Group Header. Go to Section Expert > Group Header > check if you have formula under 'Suppress'.
-Abhilash

Unable to remove the redundant group header from the bottom of page

Hi,
In one of my projects in I am facing a problem.
I need to display the details of all available products of the company. While displaying the details, I need to group the products based on some criteria (like type of product, release date) and the grouping is upto 4 level grouping. Grouping criteria can se said as, I need to firstly group all the products based on the type, then on the Release Date and then on two of the client specific values on the Product.
Along with this, the view of product details is a thumbnail view (Image on top with all details below that line after line) due to which I need to display multiple (5) products in one row.
The problem which I am facing is:
The most important criterion for the customer is that there should not be any wastage of space.
Secondly, they also donu2019t want to see partial data like only the header data in one page and the Product related Data (Image and Info) on the next page.
In my case, when first page has insufficient space for the next grouped products, it simply displays the group header on the first page. On the second page, it again displays the group header along with the data.
For reference, images are available at:
Image1: http://farm4.static.flickr.com/3454/3224626688_aa3cfb8236_m.jpg
Image2: http://farm4.static.flickr.com/3373/3224626782_0501cf566f_m.jpg
My requirement is to remove the redundant group header from the first page as it does not make sense without having any data below it.
I have tried the following options:
1. I tried to apply setting "Keep Group Together" on the group and "Repeat Group Header On Each Page". But when I apply this, when my second group has more than 5 products (two rows of data) and space on first page can accommodate only 1 row of data, it moves the data on to the second page instead of keeping the 1st row on first page and 2nd on second page. This solution is not acceptable to the customer as it wastes space.
2. If I remove setting "Keep Group Together" on all the groups, but keep the "Repeat Group Header On Each Page" and remove the "Keep Object Together" in the details section, I can save space. But this is not acceptable to the user as it leaves dangling headers (Orphaned Header Information).
Need some pointers to overcome this issue as it is very critical for me.
Thanks in advance,
Vibhav Agrawal

Thanks Raghavendra for your reply.
These solutions provided on the link are not useful for me because of the peculiar layout of my report.
In my report I am supposed to show details of multiple items (upto 5/6) in a single row.
All solutions suggest about adding additional header (below group header) and use the formula to use that header to put the data for initial first object and details section for the subsequent objects.
But, since i need to display multiple items in same row...and data cannot be set as 'format with multiple columns' in the header, hence this solution does not work for me
Thanks,
Vibhav Agrawal

Repeat group header in multiple columns

Similar Messages

Maybe you are looking for