Repeat Output on Orders etc.

Hi,
I want to write a program that takes some inpara and repeat it's output....like this
Nr..............      (could be salesnr, purchrn,billingnr et.c)
OutPut ......   (Which output to repeat. Ex ZBOO -->OrderConfi,  ZINVnvoice
REPEAT OUTPUT BUTTON.
Is there a report for this out there ?
Regards
Martin
Message was edited by:
        Martin Andersson

Hi,
Let me explain a little more....
For example ZB00, which is OrderConfirmation.
To repeat ZB00 output on excisting order, I have to enter
VA02 --Extras --Output HeaderEdit.
Then I will have to mark the output and click the REPEAT BUTTON..
The output goes away when I SAVE!
It's simular action for Delivery, Billing etc..
This is very timeconsuming and  I would like to speed up this process.
I belive that tabel NAST is central here !
So making a report that updates NAST or whatever should be perfect...
//Martin

Similar Messages

  • XML PO is getting released from SRM only when Repeat Output is performed

    Dear Experts,
    Extended Classic Scenario(SRM-XI-SUS) inwhich SRM and SUS have on same SRM Server 7.0 but with differentt clients.
    XML communication is being happened between SRM and SUS.
    PO is created and ordered from SRM but it is releasing to SUS only when Purchaser in portal  is performed  Repeat Output manually or can say "Process for  BBP_PO_SEND_XML Is Started" only when we click Repeat Output button by purchaser in portal login.
    Replicating Steps :
    1. Create shopping cart by Employee, Approve by Manager and PO is created(for say : 21111).
    2. Open PO (21111) by Purchaser Login.
    3. Go to Header Tab then Output sub tab.
    4. Then i have to click Repeat Output button then only "Processing BBP_PO_SEND_XML Badi Is Started"  otherwise not.
    Thanks in advance.
    Regards,
    Pawan Keshwani

    Hi,
    Thanks for your reply.
    I have configured  Application Control Workflow correctly ( I am using Workflow without approvals for PO (BUS2201))
    And in Rz20, I am getting below messege ("SHD : MTE class BBP_PO , Client 901 : No MTEs currently available*) for PO in Rz20 given below path
    (CCMS  monitor sets -> SAP (CEN) EnterpriseBuyer Monitors -> Purchase Order)
    I am configured ESOA Architecture in XI  for SRM-SUS , and my root issue is " I am not able to generate XML messeges in SRM".
    Not getting any messege in SXMB_MONI in SRM.
    Regards,
    Pawan Keshwani

  • HT1418 I have iPod4 and cannot see day-to-day appointments, etc on PC Outlook calendar.  Only repeated items (birthdays, anniversaries, etc.) are visible.  Where is the rest of my data and how do I restore it to the only calendar I have in Outlook?

    I have iPod4 and cannot see day-to-day appointments, etc on PC Outlook calendar.  Only repeated items (birthdays, anniversaries, etc.) are visible.  Where is the rest of my data and how do I restore it to the only calendar I have in Outlook?
    Thanks

    Hello Schimi. The Time Capsule is a kind of product that offer you two possibility:
    - To use the TC as a router or as an external HD.
    The difference between WPA and WPA 2 are:
    - They are two kinds of internet connection.
    WPA uses dynamic key encryption , which means that the key is constantly changing and makes the invasion of a wireless network more difficult than WEP . WPA is considered one of the highest levels of wireless security for your network and is recommended if your devices support this kind of encryption . Newer routers offer WPA2 security . WPA2 is compatible with WPA , but offers higher security level . In fact, it meets the high standards of many government agencies . If the router and computer support WPA2 , this should be your choice.
    If you need any help or if you find some difficult setting up it you can contact Apple Support.
    I am sure that they can help you with that.
    I am sory for the delay. I holpe that you solve your issue.

  • How to repeat output billing documents

    Hi Guru;
    How to repeat output billing documents ; because after VF04 maintain billing due list,
    all intercompany billing doucments can not be printed throught our local printer. We are using Biling type as intercompany billing and output as print.
    Regards,
    Raj

    Hi Raj,
    Please use T-Code VF31,output from Billing
    under Message Data select the output type that you need,  enter the  transmission medium as print  and select processing mode as Repeat processing.
    And in   billing data mention the correct billing document for which you want repeat output.
    Hope Above will resolve your problem for Repeat output for Billing Documents.
    Regards,
    Sandeep

  • The finder window for an external USB hard disk suddenly started separating files by time (today, yesterday, etc.) and stopped allowing me to change column width, order, etc. Also the header bar shifted to flat white from gray.

    The finder window for an external USB hard disk suddenly started separating files by time (today, yesterday, etc.) and stopped allowing me to change column width, order, etc. Also the header bar shifted to flat white from gray.
    All was normal until the icon for the disk stopped showing up on the desktop when I would plug it in. I rebooted the computer, and the disk icon now shows up but this new look to the finder window started as a result. The hard disk does not have this problem when I use it on another Mac running Snow leopard. Also, two other external hard disks that I use on this computer running lion 7.4 still have the normal header bars with columns that can be reordered, etc.
    I have tried looking in preferences and other places but have not seen this discussed. 

    Well duh - I finally figured out that somehow in the View options for the hard drive, the "arrange by" option had been changed to "by date" from "none". Not sure how that happened, I had never used the "view options" menu tem before. Changing "arrange by" back to "none" gets the gray column headers and the collapsible folder icons back. 

  • Repeat Output in FI Invoice

    Hi All,
    Please help me finding the repeat output flag for prinitng the invoice. layout driver program has ITCPP and ITCPO as print control structure.
    Which field contains repeat output flag.
    as per that flag I have to put a msg in layout.
    Regards,
    Ashutosh Kumar

    I think you need to look at NASE VERMO field for that record to check if its a repeat output
    Rgds
    Hema

  • Repeat Output not comming properly

    hi
    when i issue output and see the print prevew every thing is comming properly in the layout.
    but when i click on button Repeat output button and if i issue the output again some of the data is missing in the layout can any one tell me what can be the reason
    thanks

    Hi Ram ,
    You check the refresh statement and clear statement in the code.... may be that u have used one of these and ur contents get deleted when again its executing.....
    Thanks & Regards
    Ashu Singh.

  • Layout is not proper when viewed through repeat output option

    hi
    when i issue output and see the print prevew every thing is comming properly in the layout.
    but when i click on button Repeat output and if i issue the output again some of the data is missing in the layout can any one tell me what can be the reason
    thanks

    it is highly probable that at the time of repeat output
    some data is not passed to the form....

  • Repeat Output without edit document PO

    Hi Expert,
    I confused for repeat output in SRM...
    How concepts repeat output when create PO in SRM?
    It's posibble, if change repeat output from e-mail to print or from print to e-mail?
    It's possible, if change repeat output without edit the document PO? If edit the document, the status back to awaiting approval....
    Need your response ASAP
    Thanks and Regards,

    Hi,
    Please open PO document and go to something header -> output.
    You can "manually" trigger PO output.
    Regards,
    Masa

  • PO repeat output

    Hi guru's
    the PO Automatic output determination-Print immediately is set with Z form attached in NACE
    the Output is printed. the Changed PO is printed.
    I can also have repeat output (N numebr of times) of the original PO (message line item without change indiactor) from ME22N-Messages or from ME9F
    My Question:
    if i select repeat output for PO message line item with change indicator, the message line item is generated but with error in processing "No fields relevant to Change". the status is red and spool does not get generated.
    Has anybody come accross such a situation. Please help

    Hello
    As u said - if i select repeat output for PO message line item with change indicator, the message line item is generated but with error in processing "No fields relevant to Change". the status is red and spool does not get generated.
    See u are assigning the change indicator athough there are no Print relevant changes done in the PO, thats y spool is not getting generated, you can simply repeat the output without change indicator it will work.
    Best regards
    Vineet

  • Executing output of order header not by RSNAST00

    Hi to all.
    I would like to execute an output in order header that created with dispatch time 1-Send with periodically scheduled job. Is there any way to execute it except using RSNAST00? I would like to execute it from an ABAP program after creating the sales doc. and commit work.
    I have copied the RSNAST00 and used it in an ABAP program but it checks authorizations that my users doesn't currently have.
    Thanks, Yuval Kaduri at Cellcom.

    Hi Yuval,
    You can use the transaction VF31 and select menu Program -> Execute in Background.
    Kindly reward points if your question is answered.
    Thanks
    Vinod

  • Repeat Output Function module

    Hi SDN,
      Is there is any standard function module for repeat output in the shipments(VL02N)?
    Call the transaction VL02N , go to "GOTO" from the menu and choose "OUTPUT". Then select a output type and then press the button "REPEAT OUTPUT".

    Hello Ricky
    To transform ABAP to XML you can use the simple transformation, e.g.:
    DATA:
      gt_itab    TYPE TABLE OF knb1,
      gd_xml   TYPE string.
    * Select data into gt_itab
      CALL TRANSFORMATION id_ident
        SOURCE abap = gt_itab
        RESULT XML gd_xml.
    You could place this coding into a function module having an IMPORTING parameter of type TABLE (generic table type). However, this generic type will not work for a RFC-enable function module.
    Regards
      Uwe

  • Repeat output settings for PO reprint

    Hi,
    In transaction ME22, I am trying to repeat the output on my Local Printer to view the output of PO.
    But as soon as I save the PO after repeating the Output, the status comes as unseccessfully processed. No spool request generated either.
    Can some one explain if there is a process in SPRO by which we can restrict the print output to come out only once, and cannot be repeated.
    Regards,
    Chintan.

    Hi,
    1. Once you say "Repeat Output" in PO (ME22N), click on "Further Data" button and change Dispatch time to 3 i.e. Sent with application own transaction instead of 4 i.e. Send immediately.
    2. If you want it not to generate automatically everytime then goto NACT, here enter Application as "EF" and go to details of output type, here in "Default values" tab change Dispatch time to 3 i.e. Sent with application own transaction instead of 4 i.e. Send immediately.
    3. Also for that Output Type change Dispatch time to 3 i.e. Sent with application own transaction instead of 4 i.e. Send immediately in MN05.
    But this will change it for ME21N. Better do as per 1st suggestion.
    For Spool Request;
    Go to SU01, here input Ur User ID and change, here in "Defaults" tab deactivate indicator "Delete after output" and save.

  • Repeat Output for Deleted SA

    Team,
    I just want to find out if it is possible to repeat output for a Scheduling Agreement whose line items have been deleted.
    I have even tried to display already processed output from ME9E, but its coming up blank. ME32L, ME38 do not work too.
    I will be grateful if you have any answer on this topic.
    Thank you in advance.

    Hi Joel,
    I dont think u can have a repeat output for deleted PO. When you delete the line item it triggers a change & this can be sent as a change output. But once this is sent you cannot repeat the output if all line items are deleted.
    Thanks,
    Sourabh Kothari

  • Repeat output

    Hi,
    I have a billing document and want to repeat the print output for it.Go to Headers --> Output and say repeat output then I can reprocess it but the problem is that it gives me a copy and not the original.Can I reprint the origibal one and not the copy.Is it possible in System

    Hi Christino Ronaldo,
    I can suggest one type of printing your output. Every output generates a spool. You can reprint spool through tcode SP02. Normally spool will in data base of a week .
    Regards
    Nagendra

Maybe you are looking for