Repeat same page on every even page

Hi,
The customer printed his documents prepinted pages which has printed back side.
I need to print same text(Terms and conditions) onto each page back side.
This means I need to put fix page as every even page independently the main dynamic text.
Is it possible?
So I need to know where is the page brake.
Thanks,
N.

Use even page headers and footer option and put all your Terms & Conditions in even page header or footer and make sure your T&C occupies a full page (inset blank lines to fill the page)

Similar Messages

Cover same spot on every page

I have a job that is several hundred pages long. Every page is a poor quality scan with a mark on the same spot on every page. I would like to cover this spot on all pages. I tried using the Rectangle Frame Tool with a solid white fill (I go to Swatches then Paper) on the master page. Even if I tell the Rectangle Frame to Bring To Front, it still does not show up on top of all my scans. If I look behind the scans, the Rectangle Frame is there as if I did not tell it to Bring To Front. What am I doing wrong? I was under the impression that anything I put on the Master Page will show on all other pages. Is that correct? Is there a better way to be doing this?

Wouldn't it be simpler to edit the scan in Photoshop and remove the mark? Doing that would remove any possibility of not having the patch when you need it in some other case, or of the patch accidentally winding up in front of something you want to show.

How can I ensure newer versions of the same page are opened every time I visit

I am advised by my Uni IT screen to ensure that firefox is set to check for 'newer versions of the same page with every visit to the page'. This is to ensure proper functioning inside the University's internal tutorial program.

# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.cache.check_doc_frequency''', double-click on it and change its value to '''1'''
http://kb.mozillazine.org/Browser.cache.check_doc_frequency

Force the Summary Sub totals on same page as the Repeating Group

Hello folks,
I have a Group by Left Report where I am showing Patients and the Visits that they have taken for each Department.
I am then doing a Sub Total of the number of Visits the Patient has taken. I would like to make sure that the sub total shows
up on the same page as the data in the Repeating Group. I tried using an Anchor but the Report does not like it.
It gives an Error: REP 1213 - Field references column at a frequency below its group when I anchor from Repeating frame to the sub total footer
and REP 1814 Report cannot be formatted. Object 'Horizontally' can never fit within 'M_1' when I try to anchor the other way.
My goal is to show the Sub Totals (Total) on the same page as the Patient and not go to the next page. I have enclosed the single dashed line and the Total (Label and field) in a Frame.
Output of Report:
Patient ID     Patient Name              Department              Visit
======================================================================
1001           Mary Poppins              Department 001              3
                                         Department 002              4
                                         Department 003              1
                                         Total                       8
1002           Peter Pan                 Department 001              2
                                         Department 002              1
                                         Department 003              2
                                         Total                       5
                                         -----------------------------Thanks in advance!

Pls set the property(page protect of the frame containing both sub total and patient details) to yes.

Repeat group header on every page before group footer as group spans across

I have a group which spans across multiple pages.In group there are two subreports in Group footer.I have set all the required parameters to repeat group header on every page in group expert,but not getting desired results,please help....

I have following structure in my report.
I have two group headers at the top,first one contains name of the site & site number,second header contains Site-Admin as heading,below which i have kept details section of report which displays name of administrator which repeats details section in case there are more than one adminstrators.
Below this i have two group footers which individually contain each of the two sub-reports.
As per data,these individual subreport may or may not begin at the beginning of the new page every
time,therefore fake group header put at the beginning of these sub-reports may come in middle of the page sometime,so thet cant be done.
Thank you,please reply if you have another solution....

Why can't I open some of my documents on Pages even though I created them all on the same IPad with the same Pages ap?

Why can't I open some of my documents on Pages even though I created them all on the same IPad with the same Pages ap?

I think I know the problem because I've had it myself. I didn't upgrade iWorks on my iPad, but after Apple made changes to iCloud (concurrent with Mavericks) any docs passing through it were modified and made unreadable. Even though, as you say, they were created on my iPad using the previous version of iOS Pages, which I didn't upgrade.
iCloud is the culprit, if your iPad settings had iCloud>Documents & Data enabled, the docs were modified and disabled in the cloud.
I made a further mistake. After I saw this happening, I didn't think to turn off auto updates, and Apple pushed the new version of iOS Pages onto my iPad. The result was that ALL my docs disappeared from the iPad, and from iCloud.com also. I have not been able to recover them.
I've been talking to the Pages engineering team about it. If they come up with an answer, I'll post it here. Meanwhile, get those older files backed up somewhere safe if you can.

Header Information Repeating in the Same Page

Hi Buddies,
I have an issue with PO Print Report. I am trying to reapet the header information by using <?start:body?> after the header informaiton and <?end body?> before the footer informaiton.
If i have two different headers, it displayed in the same page. For e.g I have po header details for PO 30124 and PO 30124-1. These two headers information displaying in all the pages and main body and footer informations goes to the next page.
pls guide me how to solve this one?
Regards
Prabu

Hi,
Are you saying that you need conditional headers? If so, then use <?IF ...> statements.
If your footer is not working correctly make sure your syntax is correct?
Regards,
Gareth
Blog: http://garethroberts.blogspot.com/

WHEN I LOGIN AS DIFFERENT USER, IT TAKES ME TO THE SAME PAGE WHERE THE PREV

Hu Gurus,
I log in to portal as user1 and go to a page and then log out of the portal. Then I try to login as user2, it takes me to the same page where the previous user was. It looks like it caches the page information. How can I avoid this. Please post a reply if you have some suggestions.
Thanks
Raj
----------

Thanks for checking it, Jason. Yes, the cache settings are for 'Every visit to page'. That was the first thing I thought of. I have a feeling the problem has to do with a cache setting somewhere in our installation. For example, I'm still plagued with a few user accounts returning errors when I try to log in. The users aren't logged in, but when I click "Login" from the Portal Builder page, I see the same error...it's not even letting me get to a login screen. Thanks for all the help. It's great to get some feedback. In the meantime, we'll continue to track it down here.
Mary

Server side function not get called after dispatching cairngorm event second time on same page

Hi All,
I am facing a urgent issue regarding cairngorm event. Actually my page contain 3 button add,delete,save
and clicking of any button I do the respected functionality. For ex:
I click the add button & on clicking of add button I fire a cairngorm evnt & after getting response from server side that the record is added
I displayed a message that the record is added & update the data source.
After addition of the record , with out going to other page if I perform the same functionaly(Like adding another record) on same page the cairngorm
event not call the server side function - after debugging I find out that cairngorm event reach to the corresponding excutecommand function & called that function but it is not calling my server side function & I also din't get any error message .
I dont know why the server side function not get called?. similarly if I try for delete or update case the same things happend. Only for the first time it works properly but not for the second time.
Could any of you please tell me why the cairngorm event not calling the server side function.
Thank you for your kind assistance.
Regards,
Ujjwal

Okay, well I think I've worked out the problem.
In ASP.NET we would typically bind repeating controls such as DataLists and Repeaters manually using <i>Control</i>.DataBind(), because we're usually using a separate class library containing collections for our objects. Seems the SAP Table control doesn't like this approach.
I changed the code so that the databinding is specified on the control, and call the Page's DataBind() method and it all worked fine.
One tip: because the collection I used to bind to is in a separate class library, I receieved a <i>BC306523: Reference required to assembly MyAssemblyName...</i> message, even though I had a reference to the assembly in my project and the DLL is being properly deployed. To fix this, you must include the following directive at the top of the component's ASCX file:
<%@ Assembly Name="AssemblyName" %>

Multiple branches to the same page

A few questions about branches...
1. Having a branch back to the same page with a 'when button pressed=Submit', another branch back to the same page with some other button-press condition, etc are all redundant, right?
It is sufficient to have just one unconditional branch back to the same page, right?
2. What is the difference between branch type 'branch to page or url' and simply 'branch to page'? Does the former cover the latter, so why do we need two types?
3. Anyway, when I choose the latter, there is a checkbox below the page number for 'branch to page using redirect'. What does this mean?
4. I have always seen the 'On submit: after processing' branch point being used. When would the other branch points be used?
Thanks

Vikas,
1. No, they are not "all redundant" nor is any
individual one. What if your page is submitted in
some way other than by one of the buttons evaluated
in the branch definitions?
Right, thats why I said "It is sufficient to have just one unconditional branch back to the same page, right?". Why is it not sufficient to have just 1 unconditional branch? That would cover all the cases. Each page process can then check for whatever conditions it needs?Ummm, you say "Right" to my rebuttal and then you restate your original premise -- that logic eludes me. Let me offer this: Ponder my question, exactly as I wrote it, and consider self-submitting items, tabs, javascript, fields that submit the page when you hit Enter, etc., then it might make more sense. I don't think I can help you with that last part "Each page process..." even if it were an actual question.
2. A Branch to Page (aka direct branch) calls the
target page directly from accept processing without
using a URL redirect. The other type redirects.
Maybe this has nothing to do with HTMLDB, but whats the difference between "directly from accept processing" and "redirect"?Fair question. When you submit a page, wwv_flow.accept processes it. When it finishes, it evaluates the branching logic to determine what page you see next and then either redirects to that page (to f?p=...) or calls wwv_flow.show in the same database session (direct branch).
3. That's a way of creating most branches as URL
redirect branches when the developer isn't paying
attention. Uncheck the box to "really" create a
direct branch.
You seem to be implying that a "direct branch" is not really desirable in most cases? Why? (I guess your answer to my question above will clear this up for me)Well, they're usually not the best choice. You end up with "wwv_flow.accept" in the browser location window after the branch and using the browser's back button to go back to those requests gives you that annoying "page contains POSTDATA" message. Those branches can be useful if you want to stay in the same database session for page processing (after submit) and the subsequent page view, such as in the case of inline validation errors where package state is maintained. The checkbox (default checked) technique is to require developers to really think about a choice that may have been reflexive.
4. Please read the User's Guide.
I did. Lets take them 1 by one
a. On submit, before computation: The docs say this is to be used for a Cancel button. But wouldnt a javascript:document.form.reset() do the same thing?A Cancel button that submits the page does just that, it submits the page, allowing session state to be saved and any logic on the page to be performed before the correct branch is taken. You ask whether that javascript would do the same thing. The same thing as what, the Cancel button? No!
b. on load before header: "...displays another page instead of the current page...". But then why wouldnt I just create a branch of some other branch point with that "another page number" in the first place?Because sometimes it's better for page X to decide to go to page Y before doing much of anything than for N callers of page X to make the same determination.
I guess I am having difficulty understanding the concept of a "branch point". As you said elsewhere, a branch doesnt contain any logic, it doesnt call anything, it just branches to some page/url.Where did I say that?
So, why have all these different branch points? What advantage does having this fine degree of control provide us? (as opposed to always 'on submit: after processing'?)Your proposal about reviewing various branch points was "Lets take them 1 by one", but then you skipped three of them. Please read the entire section on branching, create pages with all possible types of branches and a variety of buttons and conditions, experiment extensively with them and let us know if it's still unclear. I think you'll find, over time, that all features
in HTML DB are there for a good reason. The developers found a need for them developing real applications. Where capabilities were missing, features were invented and added,
where features seemed useless, they were dropped/deprecated. The tool you see today has been evolving for years. I think it's unreasonable to expect to be able to
appreciate the value of every single feature until you've been using HTML DB for a couple of years.
Scott

Firefox 22 and higher shows fonts too big or too small, sometimes on the same page. How to "fix" this annoying 'improvement"?

Since the update *every* website displays with the fonts too big or too small. On many websites, some of the fonts are too big and some are too small *on the same page*
This makes for a horrible browsing experience.
I've tried setting the layout.css.PixelsPerPx to a value of 1, but all it does is make most websites fonts too small, while leaving some websites fonts too large, with many web pages having fonts simultaneously too large and too small.
The old behavior was quite acceptable and I'd really like to restore the behavior to what it was. How can I do that? Or do i just switch to Chrome and be done with it?

Did you even bother to read the question?
"I've tried setting the layout.css.PixelsPerPx to a value of 1, but all it does is make most websites fonts too small, while leaving some websites fonts too large, with many web pages having fonts simultaneously too large and too small."
This "fix" doesn't work. Hundreds of people are complaining about how their browser was broken by this "improvement". Why not address the real problem instead of telling users to apply a useless hack to fix a programming error?

Can't print TWO 5 x 7 photos on the same page!

I recently updated from Photoshop Elements 7 to Photoshop Elements 10 and now I cannot print TWO 5x7 photo's on the same page, letter size photo paper! I've never had this problem before! Does anyone know how to fix this? I have tried everything! Thanks Julie

Hatstead, I've already tried that and two 5 x 7's will not show up on the preview screen! I'm pretty familiar with all the printing preferences and have tried every concievable option to try and print two 5 x 7's to the same page. I can go back to my version 7 Photoshop Elements ( havent uninstalled it yet) and print two 5 x 7 photos to the same page with no problem! I'm really beginning to believe that version 10 does not support printing more than one photo to a page even when you want to print say a bunch of 2 x 3's to the same page. Even when i try to print one of the picture packages it will only print one pic to a page at a time!!!! Something can't be right! I only print two 5 x7's to a page 95% of the time, so this is a HUGH problem for me! Thanks for any help you can give me.

Is there a way to automatically add another of the same page while a form is being filled?

Is there a way to automatically add another of the same page while a form is being filled?
I have a two-page form of which the second page is essentially a spreadsheet analog. Often, there is need for for more lines than are available on the page. Is there a way in which to add another or even multiple copies of the second page?
Thanks ahead...
TG

You can do that with a dynamic XFA form created in LiveCycle Designer, which comes with Acrobat Pro for Windows. For more information, you can ask over at the LiveCycle Designer forum.

Creation of new button on same page after insert command

Hello All,
I have an application running on apex.oracle.com where my workspace name is shruti_work,username is [email protected] and password is buwigi. The application name inside this is "app2"
I am trying to achieve one functionality there but unable to get it so felt like seeking an help from experts here. I have two forms there one page1 form which is simplly made on an html region with go button which is navigating the page 1 items value to page 2 but simply passing their address witout updting the database table.
In Page 2 i created page on a table or view, which made some extra buttons which i dont want like applychanges ,delete button, cancel button. I created a create button even which is updating my database with insert sql command. What i am seeing is after my create button is pressed i got navigated to same page 2 which i want to but the applychange button, cancel and delete button got appeared. I dont get the idea why it is so. i have checked the buttons even i didnt found anything there.
All i want is when i press create button in page 2, my database get update and at the same page (2) a new button get appears which i have to use for other things. Approaching to this solution i created a button with giving databse action update and condition to this button "value of item in expression 1 is not null" and in expression 1 i passed p2_id...... but my new button is not getting created.
Any help on this?

Hi Jeff,
I dont want applychanges button and delete button in my page 2. But when i created form on a table or view this but got created and i cannot delete it even. When i am navigating my page from page 1 to page 2 and filling the fields in page 2 and clicking create button, at that time i want after updating my table and running my plsql process which i have created which you can see in page processing, my button at same page get generate which i will use to navigate to other form. This button which i want to generate after clicking my create button will be meaningful only if my record get inserted in table. so that is why i want it at that time.
I dont want any report so i am not creating form on a table or view

How to develp a subreport in the same page of the main report and processed when is called

SSRS 2012
Hi guys,
I am developing a report that includes a subreport.
therefore The report is made up by 2 sections:
1) Show a grid (several rows - may be 100 or more - and some columns). It represent high level info (Each row represent a specific item)
2) The user click on a Row/column (eg: Item1, to see details that must be shown as graph.
Here the problem: Searching info about SSRS reporting for subreports, drilldown, nested report and so on, no ones accomplish the requirements for the following reasons:
1) Subreports: NOT open in the same page. The user must <go back> to see detail for other items, such as Item 2....
2) Nested and DrillDown: Process data as the Main report (they are hidden and displayed after user action). In my case this leads to performance problem, because: if the main report has 200 objects (it means 200 graphs processed and hidden at the same time
for the main reports).
3) DrillThrough and Subreport: The detail data are processed only when the user select the interested item in the main report. Here the problem: the report is shown externally.
Please, it there any possibility to have a subreport (or anything else) to be executed in the same report as the main report and processed only when the user make action?
Thanks for your help.

Hi Fasttrack2,
According to your description, there is a main report with more than 100 rows of summary information, when users click the item of the row, the report need to jump to detail information shows as graph. The problem you are facing is that you are not sure
subreport, drilldown or drillthrough report should be used? You hope to set display detail information in the main report and keep high performance of report.
In Reporting Services, each subreport instance is a separate query execution and a separate report processing task. Subreports are recommended when there are just a few subreport instances. We should not use subreports inside a group when there are many
group instances, instead, consider using drillthrough reports. Drilldown reports process all data even when the data is first hidden. In order to improve the performance of the report, we can split drilldown reports into parameterized drillthrough reports,
because Drillthrough reports do not run until a user clicks the drillthrough link in the main report.
In this case, we can consider using drilldown or drillthrough report. In drilldown report, when we click a plus or minus button to expand or collapse a section of a report, the detail data will be displayed in place. By using drillthrough report, when we
click the link in the main report, the detail data will be displayed, we can come back to the main report by click return button in the drillthrough report.
Reference:
Troubleshooting Reports: Report Performance
Drillthrough, Drilldown, Subreports, and Nested Data Regions
If you have any more questions, please feel free to ask.
Best Regards,
Wendy Fu
If you have any feedback on our support, please click
here.

Repeat same page on every even page

Similar Messages

Maybe you are looking for