Repeat segment in the same idoc

Hi!!
It is not possible to repeat the same segment in different positions of an idoc. Is there another possibility of having the same segment than copying the segment?.
Thanks in advance.
regards
Example:
A1 child B1
A2 child B1

Sorry, i don´t know if i have explain clearly, i am talking about the idoc definition, i need to have the same segment  being child of different segment parents.
thanks in advance
regards

Similar Messages

  • Populating a segment in the target idoc based on dif

    Hi
    We have E1MARCM, E1MBEWM and ZE1MARCM (constum segment) in the material IDOC and we map the idoc to similar idoc which has same sement in the target idoc material idoc.
    ZE1MARCM segment is the custom segment and is the subsegment of E1MARCM. while populating the target idoc segment, we are taking the values from E1MBEWM segment and populting in ZE1MARCM, but the problem is as ZE1MARCM doesnt get populated unless E1MARCM gets populated in the source, So, we need to manually populate E1MARCM in the target message with some default valaues incase we dont have E1MARCM coming in the source. Just would like to know what is the effort in the XI side. Is it a good design to implement this in XI or should we change the ABAP in the ERP side to always populate the E1MARCM on the source idoc which is a standard idoc.

    we need to manually populate E1MARCM in the target message with some default valaues incase we dont have E1MARCM coming in the source.
    Use mapWithDefault std function or ifelse function in PI. It solves your issue.
    Is it a good design to implement this in XI or should we change the ABAP in the ERP side to always populate the E1MARCM on the source idoc which is a standard idoc.
    It anyways dont take much effort in doing so in XI. If you can do so in ABAP, even that would be fine.
    Regards,
    Swetha

  • Labeling segments of the same file

    I have dozens of short segments (a few seconds to a few minutes in length) in my timeline, all from the same file, which is several hours long and named, say, 20110301. In the timeline each of these dozens of segments is given that same name. Is there a way to label the individual segments so I can tell which is which when I'm shifting them around in the timeline?
    (My workflow thus far is to import the original file into my project, scan through it in the viewer, mark in and out points for a "keeper" bit, hit F10 to dump it into the timeline, then try really hard to remember which is which. Lather, rinse, repeat. )
    Thanks in advance for your help.

    Just an update...
    Making the clips independent didn't seem to do anything, other than to gray out that option in the ctrl+click menu. I think for the original purpose of this thread, labeling segments of the same file, it works as well as subclipping, so both of those answers were helpful, thank you.
    My second challenge (later in thread) of saving just the individual subclips or independent clips and deleting the original file remains unsolved. Media Managing it doesn't seem to be the way to go, as it claims that 45 minutes of footage is 56.5GB in space when the entire original 3 hour file is 60GB.
    Because space saving has now reached a critical point for me, I'm exporting the subclips as a QuickTime movie with the current settings so I can delete the original file and try subclipping the export and saving the individual files later... hopefully my export won't be 56GB!!
    Thanks again for all your suggestions, I'm learning a lot.

  • Can I repeat and record the same music tracks in Itunes

    How can I repeat and record the same music tracks in Itunes

    I would advise against this.
    You can redownload some itunes purchases from itunes, but there is no guarantee that it will be there in the future.

  • Idocs with status 52, can i reprocess the same idoc

    Hi,
    In production idoc status 52 created but not moving forward, can i reprocess the same idoc number.
    My doubt is , is there any impact for the first idoc generated with 52 status after I reprocess the same idoc number.
    Thanks in advance.
    Ahmed.

    Goto WE05, expand the status node and read why its not fully processed. Depending on that, you can reporcess the idoc. In general, there are some foreign constraints, without fullfilling them, the idoc wil remain in 52.

  • I keep getting repeated downloads of the same email messages

    I keep getting repeated download of the same emails sometimes within seconds of each other. I have to switch off my email to stop it. Has anyone a solution? It only happens on my Apple devices and not on my PC.

    "I have contacted the email servers and because it is only happening on Apple devices they said it was a problem with apple."
    They would say that, wouldn't they.   How do they know yours isn't the first of many?  Are you with Yahoo; they tend to have these problems.
    Here is a link discussing the matter; let us know what happens.
    Email troubleshooting - duplicate emails

  • Question relating tips for 2 DFF segments within the same group

    Hi All,
    I have a requirement where in I need to display a tip message for two of the DFF flexfield Segments within the same group. Currently we are displaying a tip for one of the DFF flexfield segment by placing it at the end of the Segment List and creating a normal tip message just below it. The shortfall of the above approach is when I add new segments to the DFF, the tip for the former segment is out of place.
    Also, I currently have a requirement to create another tip for another Segment which is part of the same DFF. Could anyone of you please suggest how both the tips for the 2 DFF segments of the same group can be shown on the same page?
    Thanks,
    Sowmya.K
    Edited by: user770244 on Nov 5, 2009 12:54 AM

    Hi experts,
    I am trying to find some solution that way:
    - Maintain field catalog (FBRC008): setting field Segment as "secondary organisational unit" and setting field parter segment as "Secondary partner unit"
    - Setting up a the reconciliation display (FBRC003) with the flag "Use Primary and Secondary org units and partner units in hierarchy display"
    But when I launch the reconciliation display, the following dump arises :
    "ITAB_ILLEGAL_COMPONENT"
    In the current ABAP program "CL_FBRC_PRESENTATION==========CP" the internal
    table "<LT_TOTAL>" was to be
    processed with "SORT".
    At the same time, a component "SEGMENT " was dynamically specified as content
    of the field "ME->MD_SECONDARY_ORGUNIT_FIELD".
    Do you have any explanation for that dump?
    Thanks!

  • Maintain different versions of the same Idoc type in Integration repository

    Hello Experts,
      I have a typical scenario where there is one global systems and multiple local sender system.The data is sent by the local system using the extended idoc segments 9900 for HRMD_A and fields which they have been using currently  by them.
    The problem is all local system have been using different fields names for having the custom fields for this HRMD_A extension.
    I think we cannot import  different idoc definition from multiple local sap systems into the same SWCV in IR to use as the source idoc structure.So,I plan to have all the fields that are being used in the local system to be maintained in the global system under the custom segment 9900 which is the same segment name being used by the local systems but with different fields.
    Then this will act as the single source for my idoc structure which can be used as both source and target structure and mapping will be done which would be specific to the system that needs to be connected.
    The custom segment fields will be mapped to standard segment or fields of the global target structure ,so the source and target will differ.
    Request you to share your thoughts on the possibilities and best approach.
    Thanks
    -Alok

    Hi Alok,
    yes you are right in this case it will overwrite.. and if you want use all of them with same name and want to use it under single SWCV then .. it is still possible..
    steps:by using external definition
    double click on SWCV in IR.
    On Definition tab.. under Interface Import provide values to parameters for connection data for import from SAP system.. then import the IDOC by using Import objects.. the create WSDL of that IDOC and use it an external definition.
    then change the these values and provide connection values for different local SAP system then again import IDOC by using import objects.. create anther WSDL and use it as an external definition..
    likewise you can achieve your requirement..
    Thanks,
    Bhupesh

  • Is it possible to change an IDOC and save on the same IDOC number..?

    Hi all,
    I have an IDOC. When I processed the IDOC, it ended up with error status '51'. There was some problem with the data. So, I changed the data and reprocessed using the T-Code 'WE19' and it was processed successfully. When we reprocess the IDOC using 'WE19', it generates another IDOC number. But, the client is asking that, it should not generate another IDOC number. When we change the IDOC number, it should be saved under the same(ORIGINAL) IDOC number. Is it possible to change an IDOC and save under the same number..? Is there any transaction code to do so. Please give your valuable inputs.
    Thanks in advance.
    Thanks & regards,
    Paddu.

    Hi,
    You can use the transaction WE09..to edit the IDOC data...
    Then use the transaction BD87 to post the IDOC..
    Thanks
    Naren

  • Recently i started getting repeated download of the same email even after reading it and often after moving it to trash.

    i have outlook accounts. sometimes it works properly. sometime i get repeat download on one account, sometimes two or rarely three. this is new within the past few weeks. i run win8.1 up to date. thunderbird is up to date. i have made no configuration changes on my thunderbird settings. this is driving me crazy. i use norton internet security. i tried turning off email scanning. made no difference. it seems that the only sure way is to empty my trash, which i like to delay. sometimes i don't have to empty the trash...

    i continue to have this problem and it is driving me nuts. i get the same messages repeated. somehow there is a failure in communication between TB and my outlook account. everything seems to be configured appropriately.
    your suggestion to uninstall TB and do a new install seems wise. i don't want to lose any saved messages, etc. is there an easy way to backup the TB data?

  • Flash Player repeatedly crashs playing the same YouTube-Video

    Hi,
    I a few days ago I surfed on YouTube and found a video which crashes my Firefoy everytime I try to play it.
    The sound plays for about 10 seconds, the video stays black. Meanwhile the plugin container process of Firefox
    starts eating up my RAM until it finally crashes.
    I asked other people on a German computer forum if they have the same issue and some of them have it others do not.
    The answers indicate it's a bug in the flash player because even the IE and Opera crash on this video.
    This is the video:
    http://www.youtube.com/watch?v=s56pxa9lpvo
    My system:
    Windows 7 64 bits
    Firefox 3.6.13
    Adobe Flashplayer 10.1.102.64

    Beautiful video!
    I have played it several times on Firefox; I did see a slight increase in memory usage, but it reverted as soon as the video ended.  The same thing happened when repeatedly playing it.
    Suggestions:
    try to disable the plugin_container;
    try to disable Hardware Acceleration (Flash Player Settings);
    try to update the device drivers of your graphics/video/display adapter; if that improves the situation, turn Hardware Acceleration back on.

  • Two network segment on the same switch (no vlan), possible?

    Why can't 2 or more network segment work on same switch (without VLAN configuration)? It seems like switch should learn MAC addresses for each interface then work but what when I try to connnect two network segment (different network id ex.192.168.1.0 and 172.16.1.0), a lot of (or all) requests are timed out. Why? Should switch igore network id because it is layer2? I know that this might be a stupid question but I kind of confuse. Thank you

    Hi,
    it should be possible, but you need a router for connectivity or maybe a small trick.
    Let us assume you have a host A 192.168.1.10/24 and another host B with 172.16.1.5/24 connected to one switch (or in one VLAN, which would give the same result).
    When you f.e. ping 172.16.1.5 from host A, it will first consult its internal routing table ("route print" on a MS host). As the destination address is not local it would not send any packet unless there is a default gateway, because otherwise no route to the destination is known. The same applies to host B, when you try to reach host A. So one possible solution is installing a router and setting it to be the default gateway. Example config:
    host A
    IP 192.168.1.10
    Mask 255.255.255.0
    GW 192.168.1.1
    host B
    IP 172.16.1.5
    Mask 255.255.255.0
    GW 172.16.1.1
    interface FastEthernet0
    ip address 192.168.1.1 255.255.255.0
    ip address 172.16.1.1 255.255.255.0 secondary
    The router will get the IP packet from host A and forward it to host B and vice versa, which results in connectivity.
    Another possibility is to modify the routing tables of host A and B.
    host A
    IP 192.168.1.10
    Mask 255.255.255.0
    GW 192.168.1.10
    host A
    IP 172.16.1.5
    Mask 255.255.255.0
    GW 172.16.1.5
    The small trick here is that both hosts have their own IP as default gateway. This will result in host A sending an ARP for host Bs MAC, when you execute f.e. ping 172.16.1.5
    As long as those ARPs are successful - and they finally should, because the switch would deliver them being OSI layer broadcasts to all ports - connectivity should be given.
    Regarding your specific network problem with timed out connection attempts, I do not know your specific configuration (hosts, router), so it is hard to tell, what is going on. If you can reveal your settings it should be possible to find a solution.
    Hope this helps! Please rate all posts.
    Regards, Martin

  • Print a pdf directly to a printer to avoid repeated ripping of the same image

    Hi,
    I have created a 3.000 pages document from inDesign heaving its page the same color image as background and variable data. The document exported as pdf. Because of this method the file has very little size (about 3MB). The acrobat print engine take the image once and the resulted pdf does not using a copy in every page but share it (very cool).
    The problem that I have is that when I print this pdf using the windows postscript drivers of my industrial printer (Xerox) then it takes very long time to ripp. I think that even if the pdf has only once the image the windows drivers does not understand this and send the image with every page.
    I discussed this with someone and told me to print the pdf directly to the printer without the interference of printer's driver. As an example he mentioned that when we have a postscript file we do the same to print it (otherwise the postscript code will be printed) using a command line like lpr and put as an argument the IP of the printer (or using some tools for this like the free PrintFile but tghis is only for postscript files).
    Could someone explain to me what he meant? And how is the syntax of the lpr?
    Thanks in advance

    Do you mean that the information for the label is huge on a letter or A4 page and you want to shrink it to the size of the label, or do you have a small region that you want to print to the label? Your work flow is not coming through at all and it is hard to help as a result.
    If you have a label size print on a large page, then crop the page to the label print. Then go to the print menu, select the label paper, set shrink to fit, and print. At least I think that is what you are looking for.

  • How ca we create an INVOICE using a BAPI and triggring the same IDoc

    Hi Gurus,
    I have a senario where in I need to create an Invoice from a remote using BAPI and then the INVOICE IDOC has to be triggered for external purpose.
    How can be this achived??
    Help me as early as possible.
    Thanks in Advance...
    Suma

    Hi,
    Are you looking for BAPI <b>BAPI_ACC_INVOICE_RECEIPT_POST</b>?
    Hope this helps (please reward me if it does).
    Regards, Joerg

  • Repeated use of the same JTextField

    Does Java allow multi-use of JTextFields in multiple JPanels? What I'm trying to do in essence is I'm trying to click on a button that will allow a dialogue box to open. This dialogue box would contain a JTextField which I am also using (for the same purpose and information) elsewhere.
    Here's the scenario:
    you click on a button (say open account) and a dialogue box pops up to ask you which account to open. The JTextField I am using in the dialogue box would retain it's value when the account opens, though it is visible on the new window as well...
    If you know the answer to this, I would a preciate the help, thanks!
    Geyegeroffe

    considering that it's the same value in either
    container, does it matter if I make a reference? it
    should simply update the value wherever it was used
    last... correct?
    GeyeU can update the value by using setText method and the textfield can be added to different containers yet retaining the value. u have to keep on removing and adding the textfield between containers.
    May i know why u wanted the same textfield when infact u can create another one for another window and pass the string from the old textfield to the new textfield. That is the most simplest and effective job. what if many threads try to access the textfield from different classes. that sure would open the floodgates for a program to hang/freeze.

Maybe you are looking for