Repeated crashes when trying to add form

Hello,
I am using DW CS3 with DDT and whenever I try to add a Nextensio form to a page, DW will crash after I finish the wizard.
I am using Windows XP pro SP2 and I have 2GB RAM.
This is a new site ( I have to remake site as I had used ADODB in original)
Any thoughts?
Thanks.
Chris

Thanks Richard,
That did the trick.
Cheers.
Chris
[email protected] wrote:
> I was having the same problem. This was a huge pain but check out this thread. It did work
>
>
http://www.adobeforums.com/cgi-bin/webx/.3bc412a6/3

Similar Messages

Labview crashes when trying to add CLIP

When trying to add component level IP into Labview FPGA the program crashes (non-gracefully) when performing the check syntax.
Steps to reproduce
Load Project (Happens with a new unsaved project as well).
Under FPGA Target (<Any Device>) -> Properties -> Component-Level IP
Select Create File
Add any VHDL file (also used the DemoClipAdder.vhd from the High-Throughput Example)
Choose User-defined IP
Check Syntax
As syntax is being checked, the following appears in the log :
 Built simulation executable x.exe
 Fuse Memory Usage: 136412 KB
 Fuse CPU Usage: 468 ms
Labview hangs for a couple of seconds then crashes
Alternatively :
Load Project (Or create a new project)
Under FPGA Target (<Any Device>) -> New -> VI
In Block Diagram, add IP Integration Block
Save VI
Double click IP Block
Add Synthesis File -> DemoClipAdder.vhd
Check Syntax (Completes successfully in this flow)
Generate
The following is produced in the log:
 Built simulation executable x.exe
 Fuse Memory Usage: 136668 KB
 Fuse CPU Usage: 421 ms
Labview Hangs for a couple of seconds then Crashes
I have tested this multiple times with multiple projects and FPGA devices with the same result every time.

Hi ThatOtherGuy
I have followed the steps to try to reproduce your problem but I have not been able to reproduce the error. I used this link to create the file and used notepad to create the file.
The Check sintax is successful and I do not get any error.
Have you try to do this in a different computer?
Which operating system do you have?
Which version of LabVIEW and drivers are you using?
Regards
Esteban R.

Acrobat 9 Pro Extended crashes when trying to distribute form

Hi.
I am experiencing an issue with Adobe Acrobat 9 Pro Extended on Windows XP Pro SP3 32-bit.
I have created a pdf file derived from an html and css file.
The pdf file comes out perfectly with form fields automatically detected, etc.
However, when I try to distribute the form, by clicking on
1. Forms > Distribute Form...
2. Manually collect responses in my email inbox..
3. Save a local copy and manually send it later.
Acrobat.exe crashes with faulting module acroform.api. when trying to create the response file.
Faulting application acrobat.exe, version 9.0.0.332, faulting module acroform.api, version 9.0.0.332, fault address 0x00025878.
Any ideas?
I can successfully distribute a different form created from InDesign.
Thank you.

Any ideas? there was an update on adobe dated 2/25/13. Perhaps if I uninstall it? I need advice on how to uninstall. When I view updates and click on it, and then click uninstall, it goes back to the Program Screen, in Control, for all programs. Then do I click on Acrobat and Uninstall? I am nervous about doing this. Thanks

Livecycle Designer ES 8.2 Crashing When Trying to Add Elements

I've created a form and hit a roadblock.
The form is 17 pages long and contains 151 elements.
When attempting to add another element the application shows not responding and then eventually crashes. Worse yet, it corrupts the PDF. The byte count for the file goes from around 280KB to 0KB. When I attempt to open the file using LC after recovering from the crash, the file is blank (obviously).
After restoring the files from tape, I attempted to work-around this issue by splitting the form into separate smaller parts and then combining the parts in Acrobat Pro, but the add more pages features is grayed out and I can combine the PDFs.
This is extremely frustrating and hugely limits my ability to create forms.
PC Specs:
Intel Xeon 1.86GHz
4GB RAM
Windows XP Pro SP3 32-bit
...just in case someone says it's a machine issue.
Here's the file: <removed>
UPDATE **** UPDATE **** UPDATE
After speaking with one of my developers, we discovered that there is a horrible bug which loops a tag in the XML.
Here is the start of the problem:
<field name="DropDownList1" y="9.525mm" x="3.175mm" w="62mm" h="9mm">
 <ui>
 <choiceList>
 <border>
 <?templateDesigner StyleID aped3?>
The <?templateDesigner StyleID aped3?> tag then runs on for around 800,000 lines of code.
This apparently is a well known issue. You can read more about the problem and the fix here:
http://acrobatusers.com/forum/forms-livecycle-designer/potential-bugs-livecycle-designer-s cript-editor-crashes-lcd
I opened the file in Textpad and deleted the tag and all its brethren.
Adobe: Is there a patch for this?

Hi, I have had the same problem occur again. This time I looked at the files inside the 8.2 subdirectory to see if I could find the speciic one that is behind this problem. Look inside the following path, C:\Documents and Settings\<your ID>\Application Data\Adobe\Designer\8.2 find the LinguisticOptions.xml and the InspectorEN178.xml. One of these or both are getting corrupted. When I delete them the program works again. It might be a good idea to back these up if you want to keep your preferences. You can then drop these back into this subdirectory when they become corrupted again. That way you do not have to delete them completely. I hope adobe will fix this problem for good. Steve

Distiller 8 crashing when trying to add watched folder

*** Reposted from Distiller Server forum ***
Hi,
I am running Distiller 8.0 and am having issues trying to add watched folders. Adding watched folders in the past has generally been trouble free, and nothing a quick restart won't solve at worst.
However, Distiller is now crashing when I try to add a new watched folder. An empty dialog box shows and then the app quits. It also does this when going into the watched folder dialog and cancelling rather than attempting to add a folder.
PDFs are still being successfully created, so there isn't a problem on that side. There is one oddity though - a PDF file has made it onto the watched folder list. It obviously shouldn't be there, and won't budge when attempting to remove it.
Has anyone come across anything like this before. Or, crucially, does anyone know what might be going wrong?
Here's a screenshot (with some blanked out business info) of the dialog that comes up. This is just after trying to add a watched folder, and just before it quits/crashes.
Thanks,
Kurt

Please repost in the Acrobat forum. This forum is for a server based version of Distiller, not the version of Distiller that comes with Acrobat.

PE4 crashes when trying to add titles/text

PE4 has just begun (I have used it for over a year without experiencing this problem) crashing every time that I click on the 'add text' button. I can't get it to crash any other way except by trying to add or edit titles.
I am using Vista on an HP pavillion with 2.0 Gb RAM and 1.8 Ghz core duo processor.
Thanks for any advice or help that you can give me!
Erik

Erik,
Since it seems that working in the Titler (Adding Text) is causing an issue, you might want to investigate your fonts very closely.
The Titler in PE and PrPro are very, very sensitive to corrupt fonts. Other Adobe programs will not balk, unless you try to actually use one. Titler will crash and bring down the house, with just one corrupt font.
Best solution that I have is to get a copy of Font Doctor from Extensis and run it on your entire system. It will find all fonts, test them and repair most. Otherwise, it will allow to remove the ones that could not be repaired.
The other way to check fonts is more involved, hence my rec. above. Move half of your installed fonts (being careful to NOT Move any system fonts). Start PE and test Titler. If it works fine without crashes, Move half (of your original half) back and test. If it's fine, move half of that half back, and so on and so on. If Moving the first half did not work, then Move half of that half and text. Get the picture? The idea is to weed out by dealing in halves, rather than Moving one font at a time. As I have over 9k on the workstaion (not installed at any one time though), you can imagine the headache. Font Doctor found twelve corrupt fonts, and was able to repair ten. I then deleted the other two, and located them on a backup disc. They were fine there.
Good luck,
Hunt

Indesign 5.5 crashing when trying to add a hyperlinks....

Working on a document and adding hyperlinks - indesign crashes when I try to add a hyperlink, anyone had this problem? or know of the solution?

It happens in other docs on multiple machines - everytime I go to the interactive palatte and choose hyperlinks - as soon as I put the cursor into the area where you insert the hyperlink or try to paste the hyperlink in Indesign crashes.
Indesign VERSION 5.5
PatchVERSION 7.5.3.333
MAC OS 10.7.3
Any help would be appreciated.

[SOLVED] CUPS Web interface crash when trying to Add Printer

I've used the web interface @ http://localhost:631
After a recent upgrade, when clicking Add Printer under the Admin tab, I enter the root username and password, and then the web interface "crashes". In Chromium, I get the "Aw, snap!" blue screen. In FireFox it just hangs forever.
In /var/log/cups/error_log I see
E [28/Nov/2009:14:46:19 -0500] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
I've tried removing /var/run/cups and it is recreated when cups is restarted, but same error. I haven't tried adding a printer via commandline because it looks difficult.
I've tried removing cups with pacman, and deleting /etc/cups/ /var/run/cups /usr/share/cups and anything else I could find and reinstalling, but no luck.
CUPS 1.4.2-1
perms on /var/run/cups 755 root:lp
perms on /var/run/cups/certs 511 daemon:sys
CUPSD running as root
/etc/cups/cups
root is a member of sys group
root is not a member of lp group (does this matter?)
Anyone have this problem?
Last edited by VitaminJ (2010-03-26 05:18:54)

Still having this problem. Even installed x86-64 Arch in a VM to see if a clean install works. NOPE!
First connection to http://localhost:631
D [24/Mar/2010:13:49:41 -0400] cupsdReadClient: 12 GET /admin HTTP/1.1
D [24/Mar/2010:13:49:41 -0400] cupsdSetBusyState: Active clients
D [24/Mar/2010:13:49:41 -0400] cupsdAuthorize: No authentication data provided.
D [24/Mar/2010:13:49:41 -0400] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[10] = "SERVER_ADMIN=root@D830"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.2"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[13] = "USER=root"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[16] = "IPP_PORT=631"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[17] = "LANG=en_US.UTF8"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[18] = "REDIRECT_STATUS=1"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[19] = "GATEWAY_INTERFACE=CGI/1.1"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[20] = "SERVER_NAME=localhost"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[21] = "SERVER_PORT=631"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[22] = "REMOTE_ADDR=127.0.0.1"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[23] = "REMOTE_HOST=localhost"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[24] = "SCRIPT_NAME=/admin"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[25] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[26] = "SERVER_PROTOCOL=HTTP/1.1"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[27] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; U; Linux x86_64; en-US) AppleWebKit/532.9 (KHTML, like Gecko) Chrome/5.0.307.11 Safari/532.9"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[28] = "HTTP_REFERER=http://localhost:631/"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[29] = "REQUEST_METHOD=GET"
D [24/Mar/2010:13:49:41 -0400] [CGI] envp[30] = "QUERY_STRING="
D [24/Mar/2010:13:49:41 -0400] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 6441)
I [24/Mar/2010:13:49:41 -0400] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=6441)
D [24/Mar/2010:13:49:41 -0400] cupsdSendCommand: 12 file=13
D [24/Mar/2010:13:49:41 -0400] [CGI] admin.cgi started...
D [24/Mar/2010:13:49:41 -0400] cupsdAcceptClient: 14 from localhost (Domain)
D [24/Mar/2010:13:49:41 -0400] [CGI] http=0x7f2bf62c7880
D [24/Mar/2010:13:49:41 -0400] [CGI] No form data, showing main menu...
D [24/Mar/2010:13:49:41 -0400] [CGI] /usr/share/cups/drivers/pscript5.dll: No such file or directory
D [24/Mar/2010:13:49:41 -0400] cupsdReadClient: 14 POST / HTTP/1.1
D [24/Mar/2010:13:49:41 -0400] cupsdAuthorize: No authentication data provided.
D [24/Mar/2010:13:49:41 -0400] cupsdReadClient: 14 1.1 Get-Subscriptions 1
D [24/Mar/2010:13:49:41 -0400] Get-Subscriptions ipp://localhost/
D [24/Mar/2010:13:49:41 -0400] Get-Subscriptions client-error-not-found: No subscriptions found.
D [24/Mar/2010:13:49:41 -0400] Returning IPP client-error-not-found for Get-Subscriptions (ipp://localhost/) from localhost
D [24/Mar/2010:13:49:41 -0400] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [24/Mar/2010:13:49:41 -0400] Script header: Content-Type: text/html;charset=utf-8
D [24/Mar/2010:13:49:41 -0400] Script header:
D [24/Mar/2010:13:49:41 -0400] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [24/Mar/2010:13:49:41 -0400] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [24/Mar/2010:13:49:41 -0400] cupsdReadClient: 14 WAITING Closing on EOF
D [24/Mar/2010:13:49:41 -0400] cupsdCloseClient: 14
D [24/Mar/2010:13:49:41 -0400] cupsdSetBusyState: Not busy
D [24/Mar/2010:13:49:41 -0400] PID 6441 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
Clicking on "Administration" tab:
D [24/Mar/2010:13:49:47 -0400] cupsdReadClient: 12 POST /admin/ HTTP/1.1
D [24/Mar/2010:13:49:47 -0400] cupsdSetBusyState: Active clients
D [24/Mar/2010:13:49:47 -0400] cupsdAuthorize: Authorized as root using Basic
D [24/Mar/2010:13:49:47 -0400] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[10] = "SERVER_ADMIN=root@D830"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.2"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[13] = "USER=root"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[16] = "IPP_PORT=631"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[17] = "CUPSD_AUTH_TYPE=Basic"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[18] = "LANG=en_US.UTF8"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[21] = "SERVER_NAME=localhost"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[22] = "SERVER_PORT=631"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[23] = "REMOTE_ADDR=127.0.0.1"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[25] = "SCRIPT_NAME=/admin/"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[27] = "REMOTE_USER=root"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[29] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; U; Linux x86_64; en-US) AppleWebKit/532.9 (KHTML, like Gecko) Chrome/5.0.307.11 Safari/532.9"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[30] = "HTTP_REFERER=http://localhost:631/admin"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[31] = "REQUEST_METHOD=POST"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[32] = "CONTENT_LENGTH=14"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[33] = "CONTENT_TYPE=application/x-www-form-urlencoded"
D [24/Mar/2010:13:49:47 -0400] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 6445)
I [24/Mar/2010:13:49:47 -0400] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=6445)
D [24/Mar/2010:13:49:47 -0400] cupsdSendCommand: 12 file=14
D [24/Mar/2010:13:49:47 -0400] [CGI] admin.cgi started...
D [24/Mar/2010:13:49:47 -0400] cupsdAcceptClient: 15 from localhost (Domain)
D [24/Mar/2010:13:49:47 -0400] [CGI] http=0x7f0dfc5d5880
D [24/Mar/2010:13:49:47 -0400] [CGI] op="add-printer"...
D [24/Mar/2010:13:49:47 -0400] [CGI] do_am_printer: DEVICE_URI="(null)"
D [24/Mar/2010:13:49:47 -0400] [CGI] Getting list of devices...
D [24/Mar/2010:13:49:47 -0400] cupsdReadClient: 15 POST / HTTP/1.1
D [24/Mar/2010:13:49:47 -0400] cupsdAuthorize: No authentication data provided.
D [24/Mar/2010:13:49:47 -0400] cupsdReadClient: 15 1.1 CUPS-Get-Devices 1
D [24/Mar/2010:13:49:47 -0400] CUPS-Get-Devices
D [24/Mar/2010:13:49:47 -0400] cupsdIsAuthorized: username=""
D [24/Mar/2010:13:49:47 -0400] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost
D [24/Mar/2010:13:49:47 -0400] cupsdSendHeader: 15 WWW-Authenticate: Basic realm="CUPS", trc="y"
D [24/Mar/2010:13:49:47 -0400] cupsdReadClient: 15 WAITING Closing on EOF
D [24/Mar/2010:13:49:47 -0400] cupsdCloseClient: 15
D [24/Mar/2010:13:49:47 -0400] cupsdAcceptClient: 15 from localhost (Domain)
D [24/Mar/2010:13:49:47 -0400] cupsdReadClient: 15 WAITING Closing on EOF
D [24/Mar/2010:13:49:47 -0400] cupsdCloseClient: 15
D [24/Mar/2010:13:49:47 -0400] cupsdAcceptClient: 15 from localhost (Domain)
D [24/Mar/2010:13:49:47 -0400] cupsdReadClient: 15 POST / HTTP/1.1
D [24/Mar/2010:13:49:47 -0400] cupsdAuthorize: Authorized as root using Local
D [24/Mar/2010:13:49:47 -0400] cupsdReadClient: 15 1.1 CUPS-Get-Devices 1
D [24/Mar/2010:13:49:47 -0400] CUPS-Get-Devices
D [24/Mar/2010:13:49:47 -0400] cupsdIsAuthorized: username="root"
D [24/Mar/2010:13:49:47 -0400] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
D [24/Mar/2010:13:49:47 -0400] [CGI] argv[1] = "1"
D [24/Mar/2010:13:49:47 -0400] [CGI] argv[2] = "0"
D [24/Mar/2010:13:49:47 -0400] [CGI] argv[3] = "30"
D [24/Mar/2010:13:49:47 -0400] [CGI] argv[4] = "2"
D [24/Mar/2010:13:49:47 -0400] [CGI] argv[5] = "requested-attributes=all"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[10] = "SERVER_ADMIN=root@D830"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.2"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[13] = "USER=root"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[16] = "IPP_PORT=631"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[17] = "CUPSD_AUTH_TYPE=Local"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[18] = "LANG=en_US.UTF8"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[19] = "REDIRECT_STATUS=1"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[21] = "SERVER_NAME=localhost"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[22] = "SERVER_PORT=631"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[23] = "REMOTE_ADDR="
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[24] = "REMOTE_HOST=localhost"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[25] = "SCRIPT_NAME=/"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[27] = "REMOTE_USER=root"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/1.4.2"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[30] = "REQUEST_METHOD=POST"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[31] = "CONTENT_LENGTH=91"
D [24/Mar/2010:13:49:47 -0400] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
D [24/Mar/2010:13:49:47 -0400] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 6446)
I [24/Mar/2010:13:49:47 -0400] Started "/usr/lib/cups/daemon/cups-deviced" (pid=6446)
D [24/Mar/2010:13:49:47 -0400] cupsdSendCommand: 15 file=16
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] Started backend /usr/lib/cups/backend/smb (PID 6447)
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] Started backend /usr/lib/cups/backend/socket (PID 6448)
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] Started backend /usr/lib/cups/backend/bluetooth (PID 6449)
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 6450)
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] Started backend /usr/lib/cups/backend/parallel (PID 6451)
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] Started backend /usr/lib/cups/backend/snmp (PID 6452)
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] Started backend /usr/lib/cups/backend/http (PID 6453)
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 6454)
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] Started backend /usr/lib/cups/backend/ipp (PID 6455)
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] Started backend /usr/lib/cups/backend/scsi (PID 6456)
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] Started backend /usr/lib/cups/backend/lpd (PID 6457)
D [24/Mar/2010:13:49:47 -0400] [CGI] Flushed attributes...
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] Found device "ipp"...
D [24/Mar/2010:13:49:47 -0400] Script header: Content-Type: application/ipp
D [24/Mar/2010:13:49:47 -0400] Script header:
D [24/Mar/2010:13:49:47 -0400] [CGI] Flushed attributes...
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] Found device "socket"...
D [24/Mar/2010:13:49:47 -0400] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [24/Mar/2010:13:49:47 -0400] Script header: MIME-Version: 1.0
D [24/Mar/2010:13:49:47 -0400] Script header: Content-Type: multipart/x-mixed-replace; boundary="CUPS-MULTIPART"
D [24/Mar/2010:13:49:47 -0400] Script header:
D [24/Mar/2010:13:49:47 -0400] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [24/Mar/2010:13:49:47 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:47 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:47 -0400] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [24/Mar/2010:13:49:47 -0400] [CGI] Flushed attributes...
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] Found device "lpd"...
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] PID 6457 (lpd) exited with no errors.
D [24/Mar/2010:13:49:47 -0400] [CGI] Flushed attributes...
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] Found device "http"...
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] PID 6453 (http) exited with no errors.
D [24/Mar/2010:13:49:47 -0400] [CGI] list_devices
D [24/Mar/2010:13:49:47 -0400] [CGI] usb_find_busses=7
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] PID 6455 (ipp) exited with no errors.
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] PID 6450 (serial) exited with no errors.
D [24/Mar/2010:13:49:47 -0400] [CGI] Flushed attributes...
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] Found device "scsi"...
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] PID 6456 (scsi) exited with no errors.
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] PID 6448 (socket) exited with no errors.
D [24/Mar/2010:13:49:47 -0400] [CGI] Flushed attributes...
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] Found device "smb"...
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] PID 6447 (smb) exited with no errors.
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] PID 6451 (parallel) exited with no errors.
D [24/Mar/2010:13:49:47 -0400] [CGI] usb_find_devices=11
D [24/Mar/2010:13:49:47 -0400] [cups-deviced] PID 6454 (usb) exited with no errors.
D [24/Mar/2010:13:49:49 -0400] [cups-deviced] PID 6452 (snmp) exited with no errors.
Clicking Add Printer button
D [24/Mar/2010:13:49:57 -0400] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [24/Mar/2010:13:49:57 -0400] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [24/Mar/2010:13:49:57 -0400] cupsdAcceptClient: 17 from localhost:631 (IPv4)
D [24/Mar/2010:13:49:57 -0400] cupsdReadClient: 17 GET /images/wait.gif HTTP/1.1
D [24/Mar/2010:13:49:57 -0400] cupsdAuthorize: No authentication data provided.
D [24/Mar/2010:13:49:57 -0400] [cups-deviced] PID 6449 (bluetooth) exited with no errors.
D [24/Mar/2010:13:49:57 -0400] PID 6446 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
D [24/Mar/2010:13:49:57 -0400] [CGI] Got device list!
D [24/Mar/2010:13:49:57 -0400] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [24/Mar/2010:13:49:57 -0400] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] Regular expression "[a-z]+://"
D [24/Mar/2010:13:49:57 -0400] [CGI] lang="en_US.UTF8", locale="/en_US"...
D [24/Mar/2010:13:49:57 -0400] cupsdReadClient: 15 WAITING Closing on EOF
D [24/Mar/2010:13:49:57 -0400] cupsdCloseClient: 15
D [24/Mar/2010:13:49:57 -0400] PID 6445 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
D [24/Mar/2010:13:49:57 -0400] cupsdSetBusyState: Not busy
D [24/Mar/2010:13:49:57 -0400] cupsdReadClient: 12 WAITING Closing on EOF
D [24/Mar/2010:13:49:57 -0400] cupsdCloseClient: 12
It's interesting how it says "Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost" when I just entered my root username and pass in the HTTP BASIC Authentication popup.

Imessage crashes when trying to add a picture in ios 8.0.2 on my iphone 6 plus

I am using IOS 8.0.2 and i have an iphone 6 plus. I've noticed that after the IOS 8.0.2 update... when i go into my messages application and try to add a photo... it was crash. The whole messages app will crash. I've tried rebooting and nothing helps.
thanks so much!

Hi danmikhail89,
I would like to recommend that you back up then restore your software on the phone in order to address this issue and see if the issue persists. The following article can help you with this:
Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
If the issue persists, you may want to perform further troubleshooting by restoring the phone, then setting up the phone as new to see if the issue persists without your backup data:
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Crash when trying to add mail account

Hello,
when i try to add a mail account, or twitter or facebook, the system preference app crashes...
tried to repare disk permissions but nothing changed...
can someone help me???
thanks!

Same
https://discussions.apple.com/message/19719182#19719182

PSCS6 crashes when trying to add text

I am trying to create a picture made up of text that represents the person inthe picture.
I go throught he stages of getting the shadows and the midtones layers together then when I add a text layer once I put in the text the program crashes and becomes unresponsive.
I tried to reduce the amount of text but then only half the text is justified correctly and the bottom half looks as if it is tryong to wrap around an invisible box.
Has anyone else had this problem?
Can the amount of text be set so that I can put a large amount of text to make a picture?

Hi mrssarahswritingclass,
You need to make sure that you have permission to make changes to the document.
How to check the permission. Open the pdf document in Adobe Reader/Acrobat.
Click on File --> Properties. Once the properties windows pops up, click on security tab. Under security please check Restrictions Summary:
Regards,
Ajlan Huda.

Dynamic Link Manager repeatedly crashes when trying to launch CC applications

Whenever I try to launch most CC applications, the application locks up and becomes unusable for a few minutes. When it locks up varies slightly between applications (Premiere Pro and After Effects locks up when launching, Photoshop locks up shortly after presenting the main window, ect.). I checked the console after noticing this was happening repeatedly, and saw the following message repeated once a second (with an iterating instance number):
10/27/13 3:56:13.725 PM com.apple.launchd.peruser.501[258]: ([0x0-0x5b05b].com.adobe.dynamiclinkmanager.application[537]) Job appears to have crashed: Abort trap: 6
10/27/13 3:56:13.773 PM ReportCrash[514]: Saved crash report for dynamiclinkmanager[537] version 7.0.0 (7.0.0.0) to ~/Library/Logs/DiagnosticReports/dynamiclinkmanager_2013-10-27-155613_lrflew.crash
I uploaded the log file mentioned in the console here: http://pastebin.com/iWBiykSP
I am using a Macbook Pro Retina, 15-Inch, Late 2013 running Mac OS X Mavericks (10.9).
Is anybody else having similar issues? Is there an update I don't know about for the Dynamic Link Manager that fixes this issue? Should I submit a bug report for this?

I came across this post while searching for a sollution to my problem. I came a cross a lot of posts like this and they all seem to have a common theme with Adobe CC paid beta. Granted I wrote a prolific rant I cannot seem to spell check, go to the last paragraph [the short version] and it will explain how to solve this. grrrr....
I noticed that CC keeps forgeting who I am, asking me to log in, updating, changing prefernce, not remembering my cloud settings, it has been awfull. I like the new features, but I feel like Adobe is restting all my macros and pressets every other month.
That is what led me to my conclusion of what is going wrong. Every time I wanted to put After Effects dynamic link Premiere would hang. I had to force close it via Windows 8. I first suspecting Windows 8 to be the problem, I turned off my UAC, I turned off my start screen, ran as admin, even tested it with the admin account. That worked. I tested it with another account., that worked. So everything worked but the account I needed to work. DARN YOU MICROSOFT!!! **fist shaking**
I then thought, "crap, what if they deleted this feature?" "No, they couldn't, this feature is the primary reason why I bought the softwear instead of trying to rip it off (poor college student first job card) Still I found the money to buy the software for this feature, now it is gone???!!!
That is when it occured to me, this was exactly like the crack versions I used of 5???
Hmmm ..
I turned off all my adobe services, rebooted, cleared cache, everything, what the hell.
Then it came to me, what if it thinks i am not who I say I am. After ...
[Short Version] Log out of Creative Cloud then back in.] If you have any issues that seem random make this your first step. Adobe as botch this granted, I believe in them, I think they should extend the $19.99 discount fo another year because of it and the fact we would still be willing to pay that. seriously Adobe, get the poop together or start compinsating your customers.

IMessage app crashes when trying to add a pic

When i tap the photo icon in iMessages the app crashes. I didn't have any issues at first, however, while tapping the photo button next to the text box as you are creating an imessage should bring up a menu with your latest photos and other sharing options, instead the app freezes for about 10 seconds followed by a complete crash.
I've tried restoring as new iphone on a few occasions, but to no avail. I did notice while my pc was synchronizing my apps, that the feature worked fine a few times until the synchronization was complete. i've tried deleting some photos with no change either.
I upgraded my 5s for the 6+, so i used the 5s' backup to restore onto my 6+. i never had the issue on the 5s and still don't have the issue on my 5s. However, I had my 6+ for 2 weeks now and i believe this issue began after the update to 8.0.2.
Has anyone else experiencing a similar issue? If so, what have you done to resolve it besides sending the pic through the camera or photo app.
VERY FRUSTRATING
Using iPhone 6 plus, 128 gb, iOS 8.0.2

I have the same problem. iOS 8 on my 5S didn't give me problems when sending pics in iMessage but ever since I got the 6 plus 128G I can't send pics because the app freezes and then crashes. When I went to the Apple Store they did a reset all settings which solved the problem for almost 2 weeks. This problem started again a few days ago and even after resetting all settings again didn't solve the problem. This is really annoying and I hope apple will fix this problem in the next update.

ITunes keeps crashing when trying to add music! WHY?!

This is getting annoying!! I uninstalled itunes, reinstalled it. I uninstalled quicktime, reinstalled it. I did the whole path thing where you had to put "C\:program files\apple blah blah" and STILL NOTHING. Every single time I try to add a song onto my library it just crashes. It opens fine but only when I add music! What is going on here?? It's been acting like this since I download the new update. HELP. Btw I have a windows 7

Nevermind. I solved it myself. Someone delete this thread..or whatever.

Firefox crashes when trying to add email attachment: Crash Signature: MSONSEXT.DLL@0x4f8b5.

Every time I try to add an email attachment in GMX.net for the first time after opening forefox, I click the "search" bar to add a file from my computer and firefox crashes. Sometimes it works after restarting firefox after a crash, but it happens way too often and every time I have to fear that my whole email is gone because of it.

It works OK now. Earlier today I received an email with an attached slide show. I downloaded the slide show, watched it, and closed the email. Afterwards I tried to create an email with an attached photo and it worked!
I used to do Fortran programming on a 7090, but it seems that the home computers containing all sorts of software from who knows where and with who knows what faults, do not always work as they are supposed to. Whatever happened to logical certainty?
Thanks anyway for your help. Jim

Repeated crashes when trying to add form

Similar Messages

Maybe you are looking for