Repeated failure of LR 2.6 to load in Windows 7

I have used Lightroom from Version 1 and have recently transferred the programme to a new PC operating under Windows 7 64bit mode. In fact all has been going well for several weeks until today when the programme refused to load properly. After rebooting, I see the main screen window with some thumbnails showing in grid view although the catalogue clearly hasn't fully loaded. Then the screen goes grey and I get a warning which includes the following:
"Lightroom problem. Files that help describe the problem:
C:\Users\-----\AppData\Local\Temp\WEREEE.tmp.WERInternalMetadata.xml
C:\Users\----\AppData\Local\Temp\WER313E.tmp.appcompat.txt
C:\Users\----\AppData\Local\Temp\WER31EA.tmp.mdmp"
I do not understand the implication of these files.
I accept the recommendation to report the problem to Microsoft and LR closes. I repeat several times without success. I reboot my computer and load no other programmes except for LR. My graphics tablet is disconnected but the same problems recur as reported above.
The only change to my normal operating routines, which I follow daily, was to install a new Wacom Intuos4 graphics tablet earlier today which worked perfectly with Photoshop CS4 for an hour before Lightroom suffered repeated failures as described above. CS4 does not suffer in the same way. Could the introduction of the Wacom tablet be the culprit? I installed the Windows 7 drivers. Surely Wacom and LR are compatible? Or is there another explanation?
I welcome advice on how to get my Lightroom programme working normally again because I use it several hours daily.
In anticipation, thank you.
David

Latest Wacom driver 17/02/2010 here:
www.wacom.com/downloads/driver-detail.php?id=212

Similar Messages

Weblogic 10.0 Parsing Failure in config.xml: failed to load java type

Hello,
I've just installed a Weblogic 10.0 on a Linux server and when i try to start it, by :
bash$ : sudo -u weblogic ./startWebLogic.sh
JAVA Memory arguments: -Xms256m -Xmx512m -XX:MaxPermSize=128m
WLS Start Mode=Production
CLASSPATH=:/opt/weblogic/10.0/patch_wls1002/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/weblogic/10.0/patch_cie640/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/weblogic/10.0/jdk150_15/lib/tools.jar:/opt/weblogic/10.0/weblogic10.0/server/lib/weblogic_sp.jar:/opt/weblogic/10.0/weblogic10.0/server/lib/weblogic.jar:/opt/weblogic/10.0/modules/features/weblogic.server.modules_10.0.2.0.jar:/opt/weblogic/10.0/modules/features/com.bea.cie.common-plugin.launch_2.1.2.0.jar:/opt/weblogic/10.0/weblogic10.0/server/lib/webservices.jar:/opt/weblogic/10.0/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/opt/weblogic/10.0/modules/net.sf.antcontrib_1.0b2.0/lib/ant-contrib.jar::/opt/weblogic/10.0/weblogic10.0/common/eval/pointbase/lib/pbclient51.jar:/opt/weblogic/10.0/weblogic10.0/server/lib/xqrl.jar::
PATH=/opt/weblogic/10.0/weblogic10.0/server/bin:/opt/weblogic/10.0/modules/org.apache.ant_1.6.5/bin:/opt/weblogic/10.0/jdk150_15/jre/bin:/opt/weblogic/10.0/jdk150_15/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.5.0_15"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_15-b04)
Java HotSpot(TM) Server VM (build 1.5.0_15-b04, mixed mode)
Starting WLS with line:
/opt/weblogic/10.0/jdk150_15/bin/java -server -Xms256m -Xmx512m -XX:MaxPermSize=128m -da -Dplatform.home=/opt/weblogic/10.0/weblogic10.0 -Dwls.home=/opt/weblogic/10.0/weblogic10.0/server -Dweblogic.home=/opt/weblogic/10.0/weblogic10.0/server -Dwli.home= -Dweblogic.management.discover=true -Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/opt/weblogic/10.0/patch_wls1002/profiles/default/sysext_manifest_classpath:/opt/weblogic/10.0/patch_cie640/profiles/default/sysext_manifest_classpath -Dweblogic.security.providers.authentication.LDAPDelegatePoolSize=50 -Dweblogic.management.username=system -Dweblogic.management.password=admin9424 -Dweblogic.Name=AdminServer -Djava.security.policy=/opt/weblogic/10.0/weblogic10.0/server/lib/weblogic.policy weblogic.Server
<Jun 7, 2010 9:49:12 AM CEST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
/opt/weblogic/10.0/weblogic10.0/platform/lib/p13n/p13n-schemas.jar:/opt/weblogic/10.0/weblogic10.0/platform/lib/p13n/p13n_common.jar:/opt/weblogic/10.0/weblogic10.0/platform/lib/p13n/p13n_system.jar:/opt/weblogic/10.0/weblogic10.0/platform/lib/p13n/wlp_services.jar:/opt/weblogic/10.0/weblogic10.0/platform/lib/wlp/netuix_common.jar:/opt/weblogic/10.0/weblogic10.0/platform/lib/wlp/netuix_schemas.jar:/opt/weblogic/10.0/weblogic10.0/platform/lib/wlp/netuix_system.jar:/opt/weblogic/10.0/weblogic10.0/platform/lib/wlp/wsrp-client.jar:/opt/weblogic/10.0/weblogic10.0/platform/lib/wlp/wsrp-common.jar>
<Jun 7, 2010 9:49:13 AM CEST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Server VM Version 1.5.0_15-b04 from Sun Microsystems Inc.>
<Jun 7, 2010 9:49:13 AM CEST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.0 MP2 Sat Apr 25 01:45:38 EDT 2009 1213942 >
i got the following error messages :
*<Jun 7, 2010 9:49:14 AM CEST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason: [Management:141266]Parsing Failure in config.xml: failed to load java type corresponding to e=domain@http://www.bea.com/ns/weblogic/920/domain>*
<Jun 7, 2010 9:49:14 AM CEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Jun 7, 2010 9:49:14 AM CEST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Jun 7, 2010 9:49:14 AM CEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
If i start the server as root, it boots but i cant deploy anything.
Any idea about this behavior ?

Hi,
It is the problem in prasing the DTD of config.xml file
It look like this
<?xml version='1.0' encoding='UTF-8'?>
<domain xmlns="http://www.bea.com/ns/weblogic/920/domain" xmlns:sec="http://www.bea.com/ns/weblogic/90/security" xmlns:xsi="http://www.w3.org/2001/XMLSchema-
instance" xmlns:wls="http://www.bea.com/ns/weblogic/90/security/wls" xsi:schemaLocation="http://www.bea.com/ns/weblogic/90/security/xacml http://www.bea.com/
ns/weblogic/90/security/xacml.xsd http://www.bea.com/ns/weblogic/90/security http://www.bea.com/ns/weblogic/90/security.xsd http://www.bea.com/ns/weblogic/92
0/domain http://www.bea.com/ns/weblogic/920/domain.xsd http://www.bea.com/ns/weblogic/90/security/wls http://www.bea.com/ns/weblogic/90/security/wls.xsd">
Please change your DTD to this lines and start the server.
Regards
Ravi D

Boot message: problem with hard drive detected. Slow loading of windows 7

Good Day
I am having a problem with my hard drive, everytime it boots these days it starts with a message: Warning: a problem with the hard drive has been detected, followed by an extremely slow loading of windows. then once in windows it gives me Anothet message
the messsage says hard drive failure imminent you should back up you data etc.
My specs are:
Intel core 2 duo e8400 3.0 ghz
4 gig ddr3 transcend
1 tb seagate 7200.12
giga byte nvidia 9800 gt 1 gig ddr3
Please help lots of data.

Another option:
Take your hard drive out and slave it into another KNOWN WORKING PC.
Back-up your data immediately. Slow boot usually indicates that the drive is going to die. (Check your warranty!)
Then, run "chkdsk /r" from the host PC to check the failing drive. (It is good to match OSes if you can.)
MCSE: 6771498

Qosmio F - Unable to load into Windows or anything

Yesterday, while studying other day outside another student bumped the table I was studying on. I would say "tapped" as it was not that hard. The normal message appears where it says the laptop will move the harddrive to a safe location etc.
Shortly after maybe 10-20mins, I get a message on the laptop screen asking me to "backup the laptop" as there was some major error or failure. I clicked on the "additional information" and it basically said all my drives C:, G: and whatever I had disk failure or something. Unable to backup the laptop as I did not have CD's present to back it up with I took it home to do i today.
The laptop is refusing to even load into windows at the moment. Unable to back up or anything. Keeps loading into options about system repair, restore, memory diagnostics etc. nothing fixes it.
I've only purchased the laptop since oct/nov of 2010. Didnt start using it till jan/feb of this year also. Should I attempt to open up the HDD as it might have loosen out at the back or? Should I send it back to manufacturer to look at? It's critical exam time for me and this is devastating! Also flying overseas late June after exams and wishing to take the laptop over there. Please help! Thanks advance for all advice and suggestions.

Hi Kyo,
Your posting is a little bit hard to understand and a screenshot of this error message would be useful but if you get an message about defective HDD and all partitions you should contact an authorized service provider in your country.
Your notebook should be still under warranty so the guys can replace the HDD for free. If you need some important data you can ask if they can rescue some files and do a backup. Alternative you can try it yourself if you buy an external HDD case for example. Then you can connect the HDD via USB to another computer.

ITunes 8.01 not loading on Windows XP Pro

I've been trying to load iTunes on my XP PC and it wont work. I try going into system processes and it says iTunes is running a process (not application but process) and isn't loading any window at all. I've installed and uninstalled and restarted countless times, but the problem is still there!
I've also tried messing with the msconfig tools
(http://docs.info.apple.com/article.html?artnum=302538), but no avail, can anyone help please?!

If you have silent launch failure (i.e. no error message) AND iTunes.exe persists on the processes tab, here is a troubleshooting method.
It is intend to diagnose the cause of the problem and you will need to feed back the results of the various steps with error messages in full.
Troubleshooting silent launch failure in Windows XP
Before checking if iTunes works, restart your PC or close the iTunes.exe process with task manager if it is running.
A couple of simple things to try:
http://support.apple.com/kb/TS1776?viewlocale=en_US
Stop the bonjour service, this FAQ has instructions:
http://support.apple.com/kb/HT2250?viewlocale=en_US
But usually it is due to a problem with cryptographic services.
Check to see if you have your smart card service and that it is not set to disabled. For some reason iTunes needs it.
Start>>Run>>Services.msc
you should find the smart card service in the list. Report back with your findings.
Malware can interfere with cryptographic services and also prevent a resolution so it is important to check that your system is clean before proceeding: Run a virus and spyware scan with up to date definitions.
Then work through *Method 4* in the following link:
http://support.microsoft.com/kb/822798
You should be able to copy and paste the individual lines to save on typing.
Make a careful note of any error messages you get, they are important for diagnosis. Report back any error messages especially the names of any dlls mentioned.
If there are no errors try starting iTunes.

Applet not getting loaded in Windows Vista's Mozilla Browser

Hi,
When I open the URL http://www.operamini.com/demo/ , the applet in that site gets loaded from windows XP and linux, but not from windows vista, for the same firefox version. When I refer the Java console I get the message lissted below.
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
load: class org.microemu.applet.Main not found.
java.lang.ClassNotFoundException: org.microemu.applet.Main
 at sun.applet.AppletClassLoader.findClass(Unknown Source)
 at java.lang.ClassLoader.loadClass(Unknown Source)
 at sun.applet.AppletClassLoader.loadClass(Unknown Source)
 at java.lang.ClassLoader.loadClass(Unknown Source)
 at sun.applet.AppletClassLoader.loadCode(Unknown Source)
 at sun.applet.AppletPanel.createApplet(Unknown Source)
 at sun.plugin.AppletViewer.createApplet(Unknown Source)
 at sun.applet.AppletPanel.runLoader(Unknown Source)
 at sun.applet.AppletPanel.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)What can be the reason? what should be done to overcome this?Is it due to any version incompatibility of Java? I have no idea regarding this.
Please help
Rony

there are other issues as well - in Safari:
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
 me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
 me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
 me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
 me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
 me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
 me2.o.a(null:-1)
attempt to load resource [/s.png] using System ClasslLoader from a.Code(Unknown Source)
 me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
 me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
 me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
 me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
 me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
 me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
 me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
 me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
 me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
 me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
 me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
 me2.o.a(null:-1)
attempt to load resource [/v] using System ClasslLoader from a.Code(Unknown Source)
 me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
 me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
 me2.o.a(null:-1)
attempt to load resource [/t] using System ClasslLoader from a.Code(Unknown Source)
 me2.o.a(null:-1)

My music is on a nas loaded by Windows Media Player in WAV. When I import into Itunes only the songs appear no album name etc.

My music is on a nas. Loaded using windows media player in WAV.
When I import into Itunes only the record apears, no Album name etc
How can can I see all the details

Information is often stored as tags embedded in the file. WAV does not support tagging. I don't know how WMP works but iTunes keeps its own database about media. For many audio formats, track information will be stored both in iTunes' database and in the file itself as tags. With formats such as mp3 most tags (not all) will 'travel' with the file when copied. This does not happen with WAV where the information is only stored in the player application's database.

Itunes 10 will not load on windows 7 64 bit. Error code 2324. Old Itunes is gone or not working. Cannot play anything although files are still there. What the ??? is error 2324. Seems like alot of people ar ehaving the same problem

Itunes 10 will not load on windows 7 64 bit. Error code 2324. Old Itunes is gone or not working. Cannot play anything although files are still there. What the ??? is error 2324. Seems like alot of people ar ehaving the same problem

I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
I hope this helps you and any other users.

Itunes wont load on windows 7. I keep getting an error message 0x80071a91. Previously had itunes installed but it wouldnt update, so uninstalled and now cant get it. Any ideas

Help, I previously had itunes loaded onto windows 7, but it wouldnt update, i uninstalled itunes and now when i try to reinstall i get an error message 0x80071a91. Any ideas on how to fix?

Hi Didi221,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari

Reader won't load on Windows 7

We purchased a new computer and are loading all the essentials but have hit a snag...Adobe Reader won't load on Windows 7. I've searched this forum and tried the suggestions. I've tried disabling firewalls and virus protection, still same problem. I'm getting the following message which seems to kill the installation:
Error 1606: Could not access network location %APPDATA%\ .
Hitting the retry button doesn't do any good. I'm trying to load version 9.3. Any suggestions??
thanks
kd

kdwhitley wrote:
I've searched this forum and tried the suggestions.
Did you try http://support.microsoft.com/kb/886549 ?

Organizer will not load in Windows 8

Organizer will not load in Windows 8 directly. If Editor is opened first Organizer will load photos but THEN converts them to hourglasses. Hourglasses will open if double clicked. I have no idea what is going on.

Do you have any other suggestions? FYI - this same software is installed on a desktop computer and I do not have this problem. When I click on "Organizer", it goes into it. The desktop is windows XP and the laptop is windows 7. When I first installed this on the laptop it worked fine. I downloaded all my pictures to photoshop.com, and started to have problems after that. I keep getting a message that my online storage is full, but I do not want to add more. Do you think my problem would be solved if I delete my photoshop.com account? Would this affect any of my pictures or albums on my computer?

I've downloaded Lightroom 5.6 today but it won't completely load before windows pops up and says that it has encountered a problem and is shutting the application down. What is my next step....thanks?

I've downloaded Lightroom 5.6 today but it won't completely load before windows pops up and says that it has encountered a problem and is shutting the application down. What is my next step....thanks?

If you use extensions like Adblock Plus or NoScript or Flashblock that can block content then make sure that such extensions aren't blocking content. 
You can see the installed Firefox extensions in "Tools > Add-ons > Extensions".
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Firefox 4 is loading multiple windows

After updating to Firefox 4, in addition to loading my window with all my saved tabs from the last session, it also loads additional multiple windows with a single blank tab.
How do I make it stop doing this?

It is possible that there is a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
Deleting sessionstore.js will cause App Tabs and Tab Groups to get lost, so you will have to create them again (make a note).
See:
* http://kb.mozillazine.org/Session_Restore

Safari always loads small window size have to always increase size pressAA several times. How can I have it bigger by default ?

Safari always loads small window size It leaves a wide margin on both side of the window. I have to always increase size press AA several times. How can I have it bigger by default ?
Changing the font size does not work. Many Thanks

Hi Bee
This is not what I mean. I'm not a new user of computers. Even when the window fills the screen. There are wide boarders either side, have to press the AA serveral times to increase web page (in the tool bar top left) so that the web page fits the window.

Command Tab cycles through open apps but does NOT load the window ??

So I've got several apps running....Mail, Safari, iTunes. I hit command tab and tab over to the program I want and then RELEASE.....The program is displayed at the top of the toolbar but where is my window ??? Its still sitting at the bottom of the tool bar waiting for me to search for it. What gives ? Why isn't command tab doing loading the window ?

Plenty of people, myself included, don't bother to minimize windows. We just keep everything open.
Perhaps this article will help you?
http://lifehacker.com/360537/restore-windows-minimized-to-the-dock
~Lyssa

Repeated failure of LR 2.6 to load in Windows 7

Similar Messages

Maybe you are looking for