Repeated failures with posts to and displays of Discussions threads??

I know this has come up before, but I was wondering if there are fixes yet for this frustrating problem. I'm sure that you all know what I mean.
You enter a search term and then Return and nothing happens, save for the blue line filling up only some of the addrerss bar, and you end up having to refresh the screen.
Or you type out, laboriously, a post, only to have it not be sent when you press Post Message-- and then you can do nothing save try refresh and get an error page. You ended up having to copy all text first before posting--just in case.
Or you click on a thread or post to read and Safari's blue line goes only so far and nothing happens--the post is NOT displayed. And you end up having to click refresh, perhaps several times, and if you're lucky, it eventually displays the thread.
Ironically, it is ONLY Apple's own Discussions forums where this happens.
What is going on with this? And is there some Safari setting or add-on to fix it? Does it happen with other browsers, say Firefox, on this site? Hmm... maybe I'll have to switch browsers every time I want to go to Apple's own site! How weird is that!

Starman, thanks for chiming in. The problem I'm having isn't a slow down... it's that the pages on THIS forum/board often refuse to load! And require multiple refresh tries-- and often that doesn't even work. And it's ONLY Apple's web site, so it's not a general ISP issue. (For example, it took me THREE times trying to be able to post this-- and required my going back to the login screen and re-entering the thread and pasting in the text before it would take!)
Say, given your handle, are you an astronomer, amateur astronomer, or sci-fi fan by any chance? I'm an a.a. and sf fan on the East coast.
Best wishes for clear skies and good universe sailing, regardless!

Similar Messages

AR Aging Report does not change with Posting, Due, and Document selections

It appears to me that when you run the AR Aging report with the same date ranges in each of the date selection fields, Posting, Due and Doument, you do not get a different display of aging buckets. Does this report always display data based on Due Date?

Hi Bill,
When you run the AR Aging report change "Age by" option and check aging buckets are changing or not it has to change.
Thanks,
Sachin

Creating a Simple Flash Movie With Poster Frame and Play/Pause Buttons

Hi, It's been over a year since I played with Flash last, and
I have completely forgotten everything I learned.
I have a .flv file which I want to play on my website. It
should display a poster frame when the page load, and not autoplay
the movie. It should have the play button I made in photoshop
sitting on top of the poster frame. When pressed, the movie should
start playing and the button should be shifted for the pause button
I made in PS (it should work just like the play/pause button in
iTunes). When the movie has finished playing, it should jump back
to the poster frame.
I have tried using the flvplayback component and also played
around with just embedding the flv directly and inserting a play
and pause button from the common library, but I can't seem to get
it to work. With the flvplayback component I have managed most of
it apart from using my own buttons and getting the poster frame to
work (which apparently has to be done with Action script).
Any help appreciated.

Which version of Flash/actionscript are you using? Since you
are just starting out, you should read one of Adobe's tutorials on
the matter. Either use Flash Help to find examples on how to use
Flash or go to their website. Here is a great tutorial for someone
just starting out. Make sure you read all three tutorials in "Using
Flash for the first time".
http://www.adobe.com/devnet/flash/getting_started.html

Issue with table selection and display the seleted rows in another page as a table data

Dear ALL,
I have a requirement as below:
I have a custom OAF page having one button, on pressing the button it will open a popup window, in that i am doing search operation and data would populate in table region below.
Then from the table i am doing multiple selection of rows and i have a button, on pressing the button the seleted rows should display in the base page where i called this popup window and popup window should close.
so i am able to perform multiple selection of row from the table but how i can display the seleted rows in my base page and how i can close the poup window after the seleted rows displayed in the base page, please help me on this.
Thanks
Deb

Hi,
For navigation data from one page to another you can use a hashmap that contains the parameters.
// processFormRequest()
HashMap hsp = new HashMap(1);
hsp.put("myParam", "myParamVal");
pagecontext.setForwardURL("MY_FUNCTION", (byte)0, null, hsp,true, "N", (byte)0);
You can then retrieve this parameter in processRequest() via:
pagecontext.getParameter("myParam")
//Code for redirect to base page with commit
Refer to the setPostToCallingPage method, from OADialogPage Class how to make the dialog page action buttons submit back to the calling page. In the example, the OK button commits the changes on the dialog page and the NO button rolls back the changes.
OADialogPage dialogPage = new OADialogPage(OAException.*, mainMessage, null, "", "");
dialogPage.setOkButtonItemName("okButton");
           dialogPage.setOkButtonToPost(true);
           dialogPage.setNoButtonToPost(true);
           dialogPage.setPostToCallingPage(true);
           dialogPage.setOkButtonLabel(yes);
           dialogPage.setNoButtonLabel(no);
Thanks,
Dilip

Need little help with JPA code and displaying database data into tables

Hello Everyone,
I am using java6 and Netbeans 6.1 on Windows XP platform.
This is probably very simple but have'nt been able to figure it out yet. I am using the Travel Java Databse included in NB6 as a learning tool.
I have a JComboBox connected to Person Table and want to display a Trip table from using the selected item from theJcombobox. In other words, Trip table shows only the Person selected from the Jcombobox.
If someone could point me on the right direction how to code JPA code or how to use NB6 GUI to accomplish this.
Thanks

The w and wi are just table aliases that make it easier to
referrence those tables by column when joining multiple tables
(avoids having to prefix column names with the entire table name,
etc.) When doing a self-join (joining a table to itself), the use
of table aliases is
required, otherwise you would have no other way to tell
which column belonged to which "instance" of table.
The query itself is pretty simple. It is just using a
correlated subquery to select only those instances of
workstationApps where the count of appID instances in
workstationAppIndex is less than the amount specified in the
maxConcurrentInstalls for the same appID.
Also, I do see what you are doing with #form.searchType#, I
was just making sure that it was what you really intended to do.
Phil

Help with image query and display

I want to show clients a few proofs. I've created a dropdown
list of Projects. That calls a CFC query to search for the related
image names within the DB. The images are stored locally/within my
Flex Application File Folder Structure. After querying the DB I
need it to return the list of images, and then display them from
the folder location. Can this be done and how? So far I can't even
get my CFC to return an Alert.show(imageList).toString(); So... I
missing something somewhere. I had to change the returntype to
query... but I've got a variable set as an imageList:image;??? Any
help or comments would be greatly appreciated!

The validator gives sound information about most
non-compliant code. For
example, the No Doctype error is an easy fix, and will
eliminate many of the
others.
Have you done anything to fix the problems ? Take the errors
one at a time
and please let us know each one you have difficulty with. You
will have to
learn some CSS to resolve some of the "errors".
"rachel_c" <[email protected]> wrote in
message
news:fj9gkv$pv4$[email protected]..
> Hello all,
> Would anyone help me in correcting the error codes on my
internet site :
>
http://jeanmichel.labarre1.free.fr
>
> I have had a look to recommendations about using the
>
http://validator.w3.org/
> but I have absolutely no idea of what changes I must
make in the code.
> I have used dreamweaver 8 and do not know much about
coding.
> The problems I encounter is that the display is
incorrect in netscape,
> mozilla... (lots of space in between text) whereas it
appears correctly in
> IE 6.
>
> Thanks a lot for your time!
> Rachel
>
>

Report Generation Toolkit failure with Win 7 and Labview 2013

I recently had my computer updated to Windows 7 and am now seeing a problem with the Report Generation toolkit (version 2013) when working with Excel files. If I try to run the New Report.vi with report type Excel selected I get error -2146777998. Doing the same thing with Word selected eventually opens Word, although this takes about ten seconds, but it does not generate an error. Selecting Standard Report or HTML also run without errors.
I've researched this error on line but I keep ending up .NET and C# forums where everything goes over my head. Has anybody got any suggestions?
Solved!
Go to Solution.

I found the solution to this particular source of error code -2146777998. There are two template files that reside in C:\Program Files (x86)\National Instruments\LabVIEW 2013\templates\Report by the name of MSOffice_RGT_Template.dot and MSOffice_RGT_Template.xlt. The problem came down to that these templates got corrupted somehow during the fresh install. As soon as I replaced them with versions from another machine the problem disappeared.
Just as a side note, I discovered the problem by kicking off the MS Office Report Express vi and out came a much clearer message that aimed me at the templates. Not quite sure why that message isn't echoed into the individual subvi's on the pallette, but life is a mystery.

Trouble with internal microphone and display

Hello together,
I just installed Arch on my Laptop yesterday. Everything works fine now, except for two things:
1) The internal microphone does not work at all. I already checked all settings in alsamixer/amixer and I also tried this, but it won't help.
2) After a reboot, the display brightness is always reduced. When I press the button to raise it again, nothning happens. When I press the button to lower it instead, it raises to the full brightness. This is a little strange and annoying, but not too important.
Does anyone have an idea how to fix that?
I would be grateful for any help.
cthl
EDIT:
I got the microphone working now, I was just a bit confused about the alsamixer/amixer settings.
Last edited by cthl (2013-11-03 17:20:28)

WonderWoofy wrote:Is that feedback? Are you sure it is not just the hum of your machine? I think of feedback as the screech you get when your mic actually starts picking up the output of the speakers.
Perhaps you're right - if so, I certainly didn't get as much background noise before. Any idea how to improve the situation?

Ldap sync failure with post process event handler

Hi All
we are using OIM 11.1.1.5 and OID 11.1.1.5 and i have ldap sync. Now the issue, is i have two postprocess eventhandlers for diff functionality which will work in trusted recon and update few custom fields. Now when i do the trusted recon my eventhandlers are working fyn but ldap sync is not working, users are not getting created in OID.
When I look in to the issue i came to know that ldap sync was not working because one of my eventhandler which will update custom date fields( lyk dob, role start date).
and the same ldap sync is working with another event hanlder(at this point i unregistered eventhandler which updates the custom date fields)
anyone help me out regarding this issue???
Regards
$sid

WOuld you mind updating, How the issue was resolved?

Repeated issues with Adobe Flash and Facebook Firefox 6

I have had repeated ongoing issues since upgrading to Firefox 6. Adobe Flash crashes repeatedly, even after installing the newest. In particular having a ton of issues with Facebook. It all works fine in IE, so have narrowed it down.
I think I would just like to go back to Firefox 5. Is that available somewhere?

Anyone able to help please?
Thanks.

Restore image failure with Windows 7 and 10.3.2 boot disc

I'm working on a sysprepped Windows 7 image. I took an image to a USB hard drive using ntfs-3g just before running sysprep then another afterward. I found some issues in the image so I reloaded the image taken before sysprep. Message on screen is Windows failed to start. A recent hardware or software change might be the cause... Status 0xc0000225, the boot selection failed because a required device is inaccessible.
This is the same computer that the image was created on - the sysprepped image installed just fine on another PC. Anyone run into this before?

Other information that might be useful - Windows 7 Enterprise 32 bit. HP 500B MT computer, Core 2 Duo, 4GB RAM. The imaging disc is the 10.3.2 January 2011 update.
I have several images that were taken at various stages of the installation process and none of them work.

Invoke-webrequest doesn't comeout when posting data on server with -InFile flag and file size is more than 820 MB

I am using invoke-webrequest command to load a file on server with POST command, and the file does get loaded. However the command hangs in console until I hit enter.
Here's what I m executing:
Invoke-RestMethod -Uri $url -Method POST -ContentType $ContentType -Headers $headerHash -InFile $filePath -TimeoutSec $timeOut
I am running powershell 3.0 on win2k12.
I ran the command with Verbose on, and it ask for confirmation to run the command as below. However when I provided -confirm:$true, invoke-webrequest suggests that there's no confirm command. I am not sure how to proceed.
Confirm
Continue with this operation?
[Y] Yes [A] Yes to All [H] Halt Command [S] Suspend [?] Help (default is "Y"):

Hi Varun,
Is there any update ?
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Can Adobe Premiere run on 2013 Mac Book Pro (thunderbolt port) and display on 2010 iMac (Mini DisplayPort) using TDM. TB cable Opt. F2 didn't work. Will a Mini Display cable work?

I need to work on Adobe Premiere on my 2013 Mac Book Pro (with thunderbolt port) and display it on my 2010 iMac (with Mini DisplayPort) using Target Display Mode (TDM). I tried using a thunderbolt cable plus Option F2, but it didn't work. Will a Mini Display cable work? Any other suggestions?
iMac specs - 21.5 inch 2010 iMac 3.06 GHz Intel Core i3 4 GB 1333 MHz DDR3
Mac Book Pro specs - 13 in. retina 2.6 GHz Intel Core i5 16GB 1600 Mhz DDR3

2010 iMacs do not have Thunderbolt, they have mini-display ports. You are using the wrong connection, you need a mini display port to mini display port. Please read up on what Apple says in Target Display Mode: Frequently Asked Questions (FAQ)

Problems with posting iDocs from MDM in SAP R3

Hi,
I am an MDM consultant, with limited knowledge about SAP R3.
We send material master data from MDM, via PI to R3 using iDocs.
We are having problems with posting MATMAS, and it seems the problems are with updating already existing materials.
In BD87 we get the following warnings:
The field MARA-ERVOE is not ready for input and was therefore not initialized
The field MARA-ERVOL is not ready for input and was therefore not initialized
The field MARA-FERTH is not ready for input and was therefore not initialized
The field MARA-KZGVH is not ready for input and was therefore not initialized
The field MARA-XCHPF is not ready for input and was therefore not initialized
With the last message being:
No changes made
I have checked the MDM syndicator, and none of these idoc-fields are linked to the MDM repository.
So they are syndicated blank.
If we try to resend the material, it is again stopped and in BD87 I see the same messages.
Please help me understanding how to solve these issues.
Thanks,
Thomas

Hi,
Please refer the below threads which talks about the similar problem
http://scn.sap.com/thread/3180116
http://scn.sap.com/thread/1374222
Generally the basic view of the material to be created first. Then the sales, purchasing and other views to be created.
There are few fields in the other views which gets values from the basic data view.
Regards,
Antony

Posting Keys and Doc. Type

Hi experts.
I have created a new process in SD and when I post the account document the customer account has a credit, but should be debit.
I realized that there is in FI Posting Keys and Doc. Type, both FI objects and Document Type is used in Billing Type configuration.
But I don´t know where I link document type with Posting Keys, and I don´t know if this link exists.
If the link doesn´t exist, How Can I configure if the process will be a credit or a debit ?
Thanks a lot for any help.
Renato

Hello, like document types, posting keys are defined at client level. For the Enjoy document entry functions you can check Incoming Invoices/Credit Memos - Enjoy --> Define Posting Key for Incoming Invoices/Credit Memos. Then check the G/L item in incoming invoice if :
Debit                40
Credit               50
Hope it helps
Kind regards
Marcela

Repeated failures with posts to and displays of Discussions threads??

Similar Messages

Maybe you are looking for